How to tell what data is being transferred

We have an Iomega StoreCenter ix2-200 and it is constantly busy doing something but we can't figure out what its doing. Is there some way where we can tell what files are open on the device? The blue light is on all the time.
We have this unit shared and we back up 5 computers to this unit but those backup schedules don't start until 5pm which I've verified on each of the PC's.
There are only the 5 PC's that are on this network that can see that NAS. The backup schedules are working fine, The data is backed up on the NAS without issues.

I would just recommend turning off any protocols or utilities that you do not currently use and make sure that Security is enabled and that the correct access permissions are set for your shares just to be sure. You can also refer to: Security Best Practices Guidelines
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

I have unknown charges on my account. How can I tell what I am being charged for?

I would like to know how to tell what I am being charged for. I have two .99 charges on my bank account and I am unsure as to what they are for. One in particular is from today and I have not purchased anything. I did do some app updates. Am I being charged for updating a purchased app?
I would like to know how to get the specific information of purchases that are appearing on my bank statement. I have tried searching for the reference number from my statement but did not find anything.
Thank you!

It could be:
iTunes Store & Mac App Store: About credit-card authorization holds
You could contact itunes support and ask. Click Support at the top if this page, then click the link under Contact Us

Is there a way to tell what is actually being passed to DB from PreparedSta

Is there a way to tell what is actually being passed to DB from PreparedStatement? What I mean by that is that I have a PreparedStatement that is a simple
prepstmt = connection.prepareStatement("Insert into table (col1, col2, col3, .... colx) values (?,?,?....?)");
(there are x ?s)
I precompile this, and later, when there is a connection I call set all the variables
prepstmt.setInt(1, someint); prepstmt.setString(2, "\\'" + somestring + "\\'"); etc... prepstmt.executeUpdate();
I get back an exception thrown by Oracle complaining that one of my values is too large for the column (but doesn't say what column/value).
So I made a string that contains what ought to be the same query
String debug = "Insert into table (col1, col2, col3, .... colx) values (someint,'somestring',etc....someotherint)"; System.out.println(debug);
I give the printed out line directly to Oracle through SQLScratchpad and it works just fine in there and I can confirm the row has been inserted. Nothing is too big.
Is there a way to look at what the PreparedStatement actually has as values in there? I found I could look at the original statement (the one with the ?s) if I expand the prepstmt object in the debugger's (Eclipse) view, but nothing to show me where the values were filled in.
Thanks for any help you can give me.

Hrm, I'm suspecting that perhaps it has to do something with setting CHAR fields. Some of the fields in this table are CHAR but I don't see a call in my PreparedStatement that can set a char, only a String, so that's what I've been using, but it may be that that's not the right thing to do. I'm running Java 1.5.10, and looking through the API there doesn't seem to be anything specifically for char.

How to tell what codec has been used??

Hi
Just wondering how to tell what codec a particular video clip has been encoded in? I cannot see it anywhere in bridge. after fx dos it for some but not all clips.
cheers
angus

if you're using Loader to load the swfs, you could examine e.contentLoaderInfo.url to see which swf it is

How to tell what packages have recently run

Occasionally, after start up, I'll see something that looks like a package that quickly runs. I have no idea where to look for information to figure out what ran. I've ran searches trying to find out how to tell what packages have recently run but have not found anything useful. If anyone knows or has any ideas on what I can do to figure that out, I'd love the help.

You are welcome. Based on my experiences, the only time I look at Console is when something is not working. You could get overly engrossed trying to figure out what everything means.

How to tell what has been downloaded/installed on iphone 4s

how to tell what has find and read hidden log filesa/programs on iphone 4s

Again, it's not universal. It's not a feature of any cell phone I've ever seen in the U.S. And, it's not a feature of the iPhone.
Submit feedback to Apple requesting such a feature here:
http://www.apple.com/feedback

Icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

icloud has has exclamation but I don't know how to tell what the error is? I recently selected bookmarks for syncing.

TM will show it has done a backup.. Look at the info.. when was the backup completed??
If you want more details install the widget.
A1 here.
http://pondini.org/TM/Troubleshooting.html
The time capsule though blinks amber and the Airport Utility shows blinking amber light and has a red circle with the number 1 in it.
There is an error.. probably trivial.. firmware update, default password..
Open the airport utility and find out what the error is.
Simply click the TC and see status in the summary page.. it will list all the errors and what you should do.. fix or ignore them. ie this TC has an error.. default password.. I chose to ignore.. when I "fix" the problem the LED goes green.
Here is additional TC.. it is blinking amber with faults.
Click the fault. eg default password.
You can ignore or edit .. if you click edit it will take you to the full setup where you can change the settings.
I ignored my errors and now it is green..

How to tell what template is applied to a Framemaker file?

I'm new to Framemaker...so please excuse if this is a silly question.
We are trying to figure out how to tell what template has been applied to a Framemaker file. We are using the structured view in Framemaker 7.2.
Perhaps I am thinking too much like a Microsoft Word user -- in which case I can look at what template has been applied to a document.
Does Framemaker work the same way -- or are templates associated with Framemaker files in some other way?
Thank you --
J-Ha

J-Ha,
FrameMaker works differently. Strictly speaking, there is no way to tell which template was used last. A FrameMaker template is just a FrameMaker document which you call "template". Using File > Import > Formats you can import all or selected formats from one document to another. The main benefit: Each document is completely self-contained and does not require any other document.
Many solutions I know of include a user variable named something like "template-version" into their template document or put the version information on one of the reference pages. When importing user variables or reference pages, this can tell you version imported last.
- Michael

Azure Storage - How to tell what vhd is attached to what?

On our storage account in our vhd container we have vhd blobs. The issue is that it looks like some where renamed from what I manually named to them to some incomprehensible name. I'm not sure when this took place but sometime in the last month. So I now
have no idea what base OS vhd goes where.
How can tell which vhd is attached to which VM?
How do I rename these VHD's without taking down the server?
How can I find out which ones are not being used? It looks like 2 vhd's (30GB) haven't been modified for a month but how do I actually know they are not being attached to anything and being used? (Note: we only have vhd's no other blobs.)
How do I get Azure to stop renaming the blobs to some meaningless name?
Thanks,
Chris

How can tell which vhd is attached to which VM?
Since a VHD is essentially a page blob and is stored as a disk (OS disk or Data disk), you can list all disks and the result will include the URL of the blob. If you're using
Windows Azure PowerShell Cmdlets, you can find this information by executing Get-AzureDisk cmdlet. Also see this link for more details:
http://msdn.microsoft.com/en-us/library/windowsazure/jj157176.aspx
How do I rename these VHD's without taking down the server?
I don't think you can do that. Again because these VHDs are page blobs and blob storage do not support "Rename" operation natively, you would need to copy the VHD first and once the copy is complete, you can delete the original one.
How can I find out which ones are not being used? It looks like 2 vhd's (30GB) haven't been modified for a month but how do I actually know they are not being attached to anything and being used? (Note: we only have vhd's no other blobs.)
When a VHD is attached to a VM, Windows Azure puts a lock (lease) on the blob holding the VHD. Easiest way for you to check is by listing the blobs in that container and find out which blob has active lease on it. Other way obviously is to get all disks
and get the URLs and comparing them with all blobs in that container.
How do I get Azure to stop renaming the blobs to some meaningless name?
Not sure what you mean. Could you please explain?
Hope this helps.

How to tell what version of a document the workflow ran against?

I am using the OOB Approval workflow and in the workflow information I see a Document field, but that links latest version of the document. How can I tell what version of the document the workflow actually ran against?

Hi,
Set a variable in the workflow to be equal to the version of the document.
Now you can use this variable to update a column in the document library with the version and date the workflow was ran. Next time the workflow runs, update this column with next run details.
OR write this variable to workflow history. Hope it helps.
Regards, Kapil ***Please mark answer as Helpful or Answered after consideration***

How to tell what version of Mac OSX?

Hello;
I am a person who works for a university here in the US. Alot of the times, I have macs that dont boot, but I can see the data from the hard drive, via an external dock. Is there a way to tell what version of the OS is from a strictly file level? Without being booted into the OS?
Thanks,
Brian

If the computer's booted into an OS which doesn't support that(not all Mac OS X versions do), open the file /System/Library/CoreServices/SystemVersion.plist in any text editor.
(70579)

How to tell what fonts are missing in a Photosohp CS5 document?

Hello! I have received some work from a graphic designer. I need to modify some of the text in the document. When I open the document I get an error message:
Some text layers might need to be updated before they can be used for vector based output. Do you want to update these layers now? [Update] [No]
If I click [Update] it replaces the font with Myriad Pro. If I click [No] the text looks the way the designer intended, but I have the exclamation mark-triangle symbol over the layer with the text. If I try to edit the text I get another warning:
Editing or rendering the text layer "Text Layer" will cause its layout to change. Continue? [Cancel] [OK]
The same behavior described above occurs. If I click [Cancel] I obviously can't edit the text. If I click [OK] it changes the font to Myriad Pro.
I would like to determine what font the layer is using. I could swear that previous versions of Photoshop would tell me what fonts were missing when I opened a document. I can't use the text tool to select the text without it changing the font. Other posts have mentioned using the text tool to look at the text drop-down to find a greyed-out font which indicates the missing font. I do not have that. I only have perhaps 200 fonts installed. Can anyone tell me how to determine what fonts a .PSD document is using? I would prefer not to bug the graphic designer if possible. Thanks much!
~ Dan

Not sure why you are getting ""Font is present on the system but requires a layout change.", usually you do not get that instead the name of the font shows.
We use extensis Universal Type Client, so the fonts load automatically upon opening files, and never really get missing fonts in Photoshop.
Actually fontbook has auto font loading if you want to give that a try. Fontbook >> Preferences

How to tell what version of Acrobat or Reader was last used to save a PDF

How can I tell what version of Acrobat or Reader was last used to save a PDF file? My users are using fillable forms from grants.gov. We want them to use Adobe Reader 8.1.3 to fill these forms, but some accidentally use the Pro version of Acrobat. They need this to make PDFs from Word & other apps, but Pro will corrupt the fillable forms.
When I open a saved form in Reader 8.1.3 and click File > Properties it says Acrobat 7.x even though I know it was saved with 8.1.3.
Is there a way to know which version number and type (Reader or Pro) last saved a PDF?

But it won't tell you what was used last. It just gives the original information.
It also won't differentiate between Pro and Standard and of course won't mention Reader at all.

What does synchronisation mean? What data is being synchronised?

On my 80GB IpoD classic I replace music several times. After successful transfer of imported CDs from the mediathek onto the Ipod I finally clean up the mediathek; that means:
Mediathek and IpoD can never be synchron because of a clompletely different contents. (I manually administer my IpoD)
Synchron to me means: 2 or more different parts do exactly the same thing.
my question:
What does synchronsation mean in this context? What info has to be synchronized between Ipod and mediathek?
Thanks for answering

You are correct that the common meaning of synchronise is to make two things the same. iTunes uses this term slightly loosely but if you set your device to sync with selections from your iTunes library, e.g, certain playlists, podcasts, TV shows etc. then changes in those part of your library can be automatically reflected on the device. For iTunes syncronisation is one way - from iTunes to the device - although it can also transfer purchased items from the device back to iTunes. When automatically syncing it can also update play counts & last played dates both from iTunes to the device and from the device to iTunes.
If you manually manage your iPod then it will still have data that needs to be copied to it or deleted at some point. Whenever data is being modified on the device it will display the "syncronising" screen.
tt2

How to tell what OSX I have, while booted into BootCamp

Hello everybody. I'm currently booted into my Windows BootCamp partition, but have read access to the OSX partition. How can I tell what version of OSX I have while staying booted into my BootCamp Windows session. Is there a file I can look at on the OSX partition that has this info?
I know the easy answer is to boot into the Mac side and just look in About This Mac, but I can't reboot right now.

Open the file /System/Library/CoreServices/SystemVersion.plist in any text editor. If needed, copy it to the Windows partition and change the copy's extension to txt.
(69764)

How to tell what data is being transferred

Similar Messages

Maybe you are looking for