How to tell whether iPhone is unjailbroken or not?

how to tell weather iPhone is unjailbroken or not?
So, about this time last week i decided to jailbreak my iphone 4 ios 5.01. being 15 most of my friends with iphones have it jailbroken. so after hours of youtube i found a way to do it and It was a success! i was really excited that i finally had a jailbroken iphone. However, i started to realize that it was not a big difference from before i jailbroken it. It started to run slow and glitch up. I also have read that jailbreaking you iphone voids your warranty with apple and i do not feel that its worth it. So i uninstalled every application that i have downloaded from cydia and uninstalled cydia its self. After i uninstalled cydia, i backed up my iphone and transfered all of my apps to my cpu. Then i restored my iphone and set it up from the previous backup i just made. Everything went perfectly! however i want to know if my iphone has actually been un-jailbroken being that i restored my iphone from a back up wear my phone was in a jailbroken state. and since i uninstalled cydia from my phone before i backed it up and restored it, there isnt any clear way to tell whether its still jailbroken or not. please if you understand anything i just said please help me lol. i do not want my warranty to continue being voided ! thanks!

If you restored from a backup remnants of the jailbreak will still be on the phone. You must go to settings/general/reset - Erase all content and settings, delete all iPhone firmware images from your computer, then do a Restore and set it up as a new phone. You cannot restore your backup. You must reinstall your apps, set up email accounts and other settings from scratch. You will lose all app content, such as game scores.
Even this will not remove all traces of the jailbreak; Apple will still be able to tell it was jailbroken. But for your purposes the jailbreak will be gone.
There is one exception; if you also unlocked the phone as part of the jailbreak the modem firmware will not match the iOS version, and future updates may cause problems.

Similar Messages

How to tell whether one driver(say driver A) is in the same driver stack with another driver(say driver B)?

I'm new to WDF, so the questions below might be trial. However, I cannot find the answers in MSDN or text book(e.g. Developing Drivers with the Microsoft Windows Driver Foundation)
The questions below only apply to KMDF on Windows Phone.
1. Can I say that one *.sys file is one driver?
2. How to tell whether one driver(say driver A) is in the same driver stack with another driver(say driver B)?
3. If several *.sys files are included in one *.inf file, can I say that those drivers are in the same driver stack?

Drivers are not in a stack, the devices created from the driver are. Consider having two identical pieces of hardware in a single computer, each will have a device object which will come from the same driver, but each device object will be in
its own stack. Things can get even more complex since a filter driver can create more than one device object in a single stack.
Just as a single driver can create devices that are in different stacks, your question on multiple drivers in an INF has the same answer, there is nothing that says they will be in the same stack.
Don Burn Windows Filesystem and Driver Consulting Website: http://www.windrvr.com

How to check whether portal user exists or not using UM API.

Hi Experts,
Let us say i need to create an user account "PortalUser",i know how to create an user,setting first name,lastname,password for that.
but here before creating the portal user, i need to check whether that user exists or not.If user already exists ,then i need to skip the below for creating the user.
IUserFactory userFact = UMFactory.getUserFactory();
IGroupFactory groupFact = UMFactory.getGroupFactory();
IRoleFactory roleFact = UMFactory.getRoleFactory();
IUser tuser = userFact.getUserByLogonID("PortalUser");
IUserMaint newUser = userFact.newUser("PortalUser");
newUser.setFirstName("PortalUser");
newUser.setLastName("Test");
newUser.setEmail("PortalUser.Testatgmaildotcom");
//Locale PortalLanguage = new Locale(Lang.toLowerCase(), "");
Locale PortalLang=new Locale("en");
newUser.setLocale(PortalLang);
newUser.save();
newUser.commit();
IUserAccount userAcc = UMFactory.getUserAccountFactory().newUserAccount("PortalUser", newUser.getUniqueID());
userAcc.setPassword("test1test$");
userAcc.save();
userAcc.commit();
Thanks in advance.
Thanks
Sony.

Hi,
Try this code,
IUserFactory factory = UMFactory.getUserFactory();
IUser user = factory.getUserByLogonID(userId);
lastName = user.getLastName();
firstName = user.getFirstName();
refer this pdf,its very helpful
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/webinars-nw-rig/using%20the%20user%20management%20api%20with%20ep%20applications%20-%20webinar%20powerpoint.pdf
Regards,
Sunaina Reddy T

How to fix my iphone 3g it would not boot up it just says at the apple logo screen when you turn it on

how to fix my iphone 3g it wont boot up it just goes to the apple logo screen and freeze up

Try here. iPhone and iPod touch: Frozen and unresponsive

How to know whether User is Buyer or not?

Hi,
I am developing a function module to create/update/unassign Employee Org Hierarchy. In this I have to know whether User is BUYER OR NON BUYER?.
If user is assigned to purchase org/purchase group then he will be BUYER or else he will be NON BUYER. If once I come to know whether user is BUYER OR NOT, then I have to proceed further differently in both the cases.
Pls help me out in this regard asap.
Thanks & Regards,
Nagaraju Maddi
Message was edited by: Nagaraju Maddi

Nagaraju
Buyer will be having purchaser roles like SAP_BBP_STAL_PURCHASER, SAP_EC_BBP_PURCHASER, SAP_EC_BBP_ST_PURCHASER. Check the roles of the users. If you find Purchaser(standard roles) or Buyer(in case of customized roles) in their roles then he/she will be buyer.
Similarly Non buyer user will be having Employee role like SAP_EC_BBP_EMPLOYEE.
Hope this will help you.
Do reward points for helpful solution.
Regards
Jagdish

How to find whether iphone is in warranty

Hi,
I am using an Iphone4 which was bought in UK and is officially unlocked.
Can some one please tell me how to find out whether my iphone is in warranty or not.

support page, left side, down,
looks like I'm tring to be a smart __ but just tring to get you there

How to tell whether video preview is working?

An app shows video preview with code essentially the same as in
the MSDN document:
async void ShowPreview(object sender, RoutedEventArgs e)
if (mediaCaptureMgr == null)
// Using Windows.Media.Capture.MediaCapture APIs
// to stream from webcam
mediaCaptureMgr = new MediaCapture();
await mediaCaptureMgr.InitializeAsync();
myCaptureElement.Source = mediaCaptureMgr;
await mediaCaptureMgr.StartPreviewAsync();
It works most of the time. However, sometimes the video does not show. When this happens, myCaptureElement.ActualWidth and myCaptureElement.ActualHeight still return the correct values. This probably means at least something is working. In this case, how can
the code tell what my eyes can see - the video is not showing?
Hong

Hi Hong,
Based on my knowledge, your problem may related to the dispose of the MediaCapture object. Forget to dispose it when app suspends will result in a negative user experience for your app.
About your question, I’ve not seen such property in MediaCapture class, so it’s recommend to create a Boolean that indicate whether the app is currently previewing video. You need to maintain this object when start or stop preview. You can find more information
from this page.
https://msdn.microsoft.com/en-us/library/windows/apps/xaml/hh868171.aspx. See Step 5 section.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. Click HERE to participate
the survey.

How to tell if iphone user is secretly using the iphone

Ipbone usage -- if somebody was sneaking and hiding what they were doing on their phone ie -- instant message thru email vs phone call or text message which will record on phone bill, or using other apps or ? what ever means one could sneak around with-- would it be obvious in the iphones diagnostic and usage dATA ???? by looking at the history would there be a way to dicepher or would it more likely be some jigsaw puzzle ?

Put a passcode on it and don't give the passcode to anyone. Then you will know that no one is using the phone. If the phone in question is not yours, then whether they are using it secretly or openly is probably outside of your control.

HT3231 Migration Assistant: How to tell whether it is working

How do I know Migration Assistant is working?
I have followed the outlined steps in the dialogue box as far as they take me - the 'continue' is greyed out; only 'go back' is accessible.
But there's no spinning wheel, no indication whether everything's ok.
I spent 7 hours thinking all was well when in fact nothing was going on.
I've restarted, and again, it doesn't look like anything is happening.
Please help.
I'm desperate to get this new Retina up and running . . . it's been a 4 year wait!
Thanks in advance.

Answer found:
http://pondini.org/OSX/MigrateLion.html

How to tell siri iphone is mine

My new iphone4 S thinks the phone is "shannon's" (my wife)
How do I change it to recognize me as the owner/primary?
That way I can assign relationships to my contacts, i.e. Gail is my mother (not shannons)?

found the answer.

How to tell when iPhone is fully charged?

I'm running version 1.1.2. The battery is green while charging. As charge increases, the green continues to fill the battery. Eventually, it fills the entire battery. Is there some indicator to let you know the iPhone has reached a full charge or once the green fills the entire battery is it charged?

The only thing I do to optimize the battery is let the battery drain untill the phone turns off and chrage it over night leaving it turned off, and I do this about once every other month, never had it turned off for that long afterwards.
Others reported that having it off helped their battery life but mine works according to the usage stats posted by Apple so I do not feel the need to do anything else.

How to tell whether a license used to install SQL Server is MSDN license or Volume license?

I want to check license used to install SQL Server is MSDN license or Volume license for SQL Servers which are at least SQL Server 2008 on Windows 2008 R2. Is there any script/command/tool that I can run on Windows or SQL Server to find such
information?

Hello,
This is a community forum for technical questions & issues.
For question regarding pricing / licensing please contact a Microsoft sales partner or licensing expert.
Call (1-800-426-9400), Monday through Friday, 6:00 AM to 6:00 PM PST to speak directly to Microsoft licensing specialist.
http://www.microsoft.com/en-us/server-cloud/products/sql-server/buy.aspx
T-SQL Articles
T-SQL e-book by TechNet Wiki Community
T-SQL blog

How To Tell Whether Your Network's Fully WPA Or Not?

Greetings!
Okay, I have a 1.25ghZ 10.4.11 eMac on Ethernet Verizon DSL which is linked via Airport to my 900mmHz 10.4.11 iceBook and 700mHz iMac. I can network my iceBook and iMac well, even though though the eMac's Network Status panel Built-in Ethernet indicator of connecting with the Internet is green but the Airport one is red(?) but still states Internet Sharing is on and using Airport to share the connection. Now I THINK I managed to change over from WEP to WPA because the eMac's Security panel says my preferred network is on WPA Personal (it's not on "computer-to-computer network -- is that securer?), like my iceBook and iMac also are, but I don't have any black and white proof that everything's indeed on WPA now. Is there any way to test for this?
Thanks for any hints!
JimWG

In Tiger/10.4, it can do WPA to a Router, but not with another Mac running 10.4 doing a very simple implementation of Internet Sharing as I recall, so...
I'd suspect that Macs connecting to a Wifi Router would/could use WPA, but connecting through another Mac on 10.4 would be limited to WEP at most, but if the connection is From Airport to Computers using Ethernet, you don't need encrytion.
Your G4 could connect using WPA & Wifi, with one of these...
http://eshop.macsales.com/item/Newer%20Technology/MXP802GU2/
http://eshop.macsales.com/item/Asus/WL167G/
http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/
If not, is this 802.1 WEP setting better security than plain vanilla WEP?
WEP of any kind is NO Security at all, takes a few seconds anymore to break 128 bit WEP.

How do I make iPhone passive in iPhoto - not once but always

I use Aperture and iPhoto. I import all my photostreams and photos to Aperture. It is my main photo application.
But I also use iPhoto for special fotos and events.
I never syncronize my iPhone with iPhoto or iTunes, but I often connect it to my MacBook just to charge the phone.
Every time I work in iPhoto and connect my iPhone, iPhoto will open my photo roll and make my photo roll ready for import.
Then I can right-click on the iPhone in the iPhoto device list and make the phone "passive". But I have to do that EVERY TIME I connect the phone.
How do I make the iPhone passive??
I don't want the phone to be "married" to iPhoto. It should be "married" to Aperture ONLY.
Frank

You can't. If iPhoto is open when you connect the phone then it will offer itself from importing.
Regards
TD

How to check whether a Record Exists or not in Ztable

Hi all,
I have Req like this
In ZTable i have 2 fields * Legacy System , Legacy Material No*
Environment Value is coming in one of the field in Idoc
The logic is if the Environment Value is UK and a Record Exists on the ZTable for Legacy Sysyetm = Leg1 means i have send Legacy Material No , else Send 01
Please suggest me the process for this
REgards
Vamsi
Edited by: Vamsi Krishna on May 19, 2009 5:31 PM

Hi Michal / Aamir,
Thanks for your replies.
The ZTable is at R/3 side only, iam using RFC Lookup for this, but iam bit confuse on how to construct the logic to check whether there is a record Exists or not on Ztable
Logic shld be If the Environment value is UK and a record exists on the Ztable for Legacy system "ABC" means then send Legacy material number else send 01
In Table we will have the fields Legacy System Legacy Material No & Environment value is coming from Idoc itself( Ex: UK or US)
Regards

How to tell whether iPhone is unjailbroken or not?

Similar Messages

Maybe you are looking for