How to tell which codec

I have an .avi movie that Premiere imports only as audio and not video. This video plays also bad on Windows Media Player or Winamp (same problem, only audio), but plays well on e.g. All Player. So it is probably a problem with codec, which only All Player read..
So I have a question: how to recognize which codec is used? I thought avi is just avi, but found out on these forum that more people had this problem and the solution is always: bad codec. Is there a method/program that would allow me to check which codec was used for this particular video ? Unfortunately All Player does not show information about codec, only size and fps of the movie. So what I think about is a program that would open the clip and recognize which codec was used and display this information. Is there such a program? All I want to know (for now) is the name of the codec. Knowing the codec, it will perhaps be possible to re-code in some other program to a format suitable for Premiere..

Does it open with Quicktime? If so, in the Quicktime window, under the window menu or control + j, choose "show movie properties".
I've had this same problem (audio, no video) with files brought to my PC from a Mac that are encoded using the Apple Intermediate Codec.

Similar Messages

How to tell what codec has been used??

Hi
Just wondering how to tell what codec a particular video clip has been encoded in? I cannot see it anywhere in bridge. after fx dos it for some but not all clips.
cheers
angus

if you're using Loader to load the swfs, you could examine e.contentLoaderInfo.url to see which swf it is

HT201302 I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks

I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks!

If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account?

How to tell: Which version of camera raw do I have?

How to tell which version of camera raw I have? The only Google search I found answering this question refers to is 2 years old and seems to no longer apply. There is no File, Edit etc. menu on the new version of Camera Raw with (Photoshop/Bridge CS6). I do use Adobe Application Manager to do my updates telling me if a new version exists or not, nevertheless I would like to know.

The F key works as described for me in CS6-ACR7.4 with ACR as the window with focus. The same function is available using the double-arrow-window icon at the right of the Preview checkbox near the top right of the preview area.
When in full-screen mode there is no title bar, but when I press the F key or click the double-arrow, again, ACR becomes smaller and I can see the title bar that includes the ACR version and camera model. This is on Windows7-64-bit on a 1600x1050 monitor. Perhaps you’re ACR’s title bar is off the top of the screen so you can’t see it, or maybe ACR optimizes some things if you have a smallish display—do you?
A plug-in is a program that interfaces with another program but is not independently runnable application, itself, bit is independently updatable, so in this instance, Photoshop doesn’t need to be downloaded and installed every time Adobe adds support for a few more cameras.

How to tell which photos in iPhoto are HDR images.

Does anyone know how to tell which photos in iPhoto are HDR images. When I click on the Info button for the image it doesn't indicate if it was an HDR.
Does anyone have any information about this?
I'm using a new iPhone 5s with basically a new iMac.
Thanks,
Hagrid...

You can do a filter on your library with "File Status" is "Missing". The "File Status" query is not available by default, but you can add it by clicking the upper-right button in the filter window.
nathan

How to tell which JButton is clicked?

I have a layout with 3 panels. Each panel has an 'Add' button inside it. However, I can't work out how to tell which 'Add' button has been clicked by the user. Normally I would put code to select from the text on the button, but this time they are all the same. Any ideas how I can do it?
Thanks

DrLaszloJamf: Do you have a simple example that you
could post? I thought all
ActionListeners/MouseListeners in the same class had
to be dealt with in the same place.I'll give you an example in a mo', but here's another solution if you really
want one ActionListener to listen to multiple sources: explicitly set the
button's actionCommand strings. This string defaults to the button's text,
but can be explicitly set to anything you want. This is useful, for obvious
reasons, if you are writing a multilingual app (I'm Canadian, so that's
part of the furniture).
import java.awt.event.*;
import javax.swing.*;
public class Example implements ActionListener {
    private static final String MUG_COMMAND = "mug";
    private static final String WUMP_COMMAND = "wump";
    public void actionPerformed(ActionEvent event) {
        String actionCommand = event.getActionCommand();
        if (MUG_COMMAND.equals(actionCommand))
            System.out.println("doing mug action");
        else if (WUMP_COMMAND.equals(actionCommand))
            System.out.println("doing wump action");
        else
            System.out.println("neither mug nor wump: " + actionCommand);
    public static void main(String[] args) {
        ActionListener app = new Example();
        JPanel contentPane = new JPanel();
        JButton button1 = new JButton("add");
        button1.setActionCommand(MUG_COMMAND);
        button1.addActionListener(app);
        contentPane.add(button1);
        JButton button2 = new JButton("add");
        button2.setActionCommand(WUMP_COMMAND);
        button2.addActionListener(app);
        contentPane.add(button2);
        JButton button3 = new JButton("add");
        button3.addActionListener(app);
        contentPane.add(button3);
        JFrame.setDefaultLookAndFeelDecorated(true);
        final JFrame f = new JFrame("Mugwump");
        f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        f.setContentPane(contentPane);
        f.pack();
        SwingUtilities.invokeLater(new Runnable(){
            public void run() {
                f.setLocationRelativeTo(null);
                f.setVisible(true);
}

How to tell which node a session connects to in 9i RAC

I have a 6 nodes 9i RAC database. While running a process, how to tell which node it is connecting to?

Hi,
SQL> select inst_id, sid, username from gv$session ;
inst_id is the instance number a session is running on.
select from the v$instance view to know to instance number you are actually connect to
SQL> select instance_number from v$instance ;
INSTANCE_NUMBER
1
note the the "g" before the view "v$session", that's for GLOBAL (all instances of the cluster) : check the views gv$parameter, etc...
Fred

How can I tell which codecs I actually need?

When trying to open some .avi files I get the message that Quicktime Pro cannot play the file, and it may require to download a codec which just may be available from the Quicktime website... so, off we go... and there's a list of maybe ten or twelve different links for codecs with no hints or tips whatsoever.
How do I tell which one I actually require?

These are the downloads and the settings you need in order to view/hear/play pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
Download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 11.1 for Mac from:
http://www.versiontracker.com/dyn/moreinfo/macosx/15540
Flip4Mac WMV Player from http://www.telestream.net/flip4mac-wmv/overview.htm (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
You should also ensure that you have downloaded and installed the correct version for your Mac of Security Update 2009-001 (and for Tiger only, 2009-002 and 003). (N.B. Security Updates require both a restart and a permission repair.)
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.
There is an additional 'fix' you could try if you are having problems with Flash and Quicktime, depending on which type of Mac you have:
On Intel Macs, make sure that you are not running Safari in Rosetta. You can check this, and change it, in the Get Info window.
On PPC Macs, go to the Hard Disk/Library/Internet Plug-Ins folder, and drag the file 'QuickTime Plugin.webplugin' to the desktop. Quit and restart Safari. If things have improved you can trash that file. If they haven't put it back, as the lack of this plug-in can cause QT content in some widgets to cease functioning.
And there is an additional kid on the block: SilverLight. Microsoft has created their own version of what a replacement for Flash could be. You can read more about it here:
http://silverlight.net/
So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4:
http://silverlight.net/GetStarted/
Recommendation: Close all applications before installing any of the above, repair permissions, reboot, and repair permissions again.

How to tell which maps are the latest?

I have Maps v3.01 loaded on my 6710 Navigator (came with free worldwide licence) and Map Loader v3.0.28 on my PC.
How do I tell which maps are loaded on my Nokia and what version/date the maps availalble on Map Loader are?
Map Loader does not state which maps are already on my phone, nor does it state the date or version of the maps which can be uploaded.
Obviously, I'd like to install newer versions of my country map if and when it is available, but how do I know which version is available and which I already have?
Ovi.com does not seem to be the answer either as all maps were downloaded using Map Loader.
Solved!
Go to Solution.

If you already have a free worldwide license and V 3.01 is working well for you then you are right to leave it for the moment. I hear of problems searching for addresses etc with V3.03. Can always update later when everything is sorted.
I believe if you delete all your maps and then use Ovi Suite to download new maps, Ovi Suite will at least tell you what maps you have on your phone. I haven;t tried it myself because I can't stand Ovi Suite.
Speed warning is available for Ireland but just like you I have to import the speed camera locations as landmarks. Hopefully, we will see these as new features in future updates.

How to tell which Indexes are not being used?

We are a large development shop and have many customers. Our database design is very generic so that it works for all of our customers. Each night we use an SSIS ETL process to bring down large amounts of data from the iSeries into SQL. One
particularily large customer takes a very long time and we are looking for ways to speed up thier data import and transformation. I would like to see which indexes he does not use and possibly remove them. Each night we fully repopulate hundreds of staging
and ods tables and incrementally delete and repopulate the days work for a handful of history type tables. Removing some indexes off of the large tables could make a big impact.
How can i tell which indexes the customer does not use?

> IDENTIFYING UNUSED INDEXES IN A SQL SERVER DATABASE
Just because an index is not being used does not necessarily mean it should be removed.
> Index This: All About SQL Server Indexes
sp_BlitzIndex
José Diz Belo Horizonte, MG - Brasil

"dtutil", how to tell which configuration file for packages using after deployment?

Hello All,
Trying to achieve this feature,
Using DOS command to automatic my deployment process--glad I found dtutil. However, it doesnt give you any chance to identify which configuration file to be used by SSIS packages after deployment.
Deployment Method: file deployment
Configuration sued: XML file and SQL Table. IN XML file, it tells which DB connection for packages to look up the configuration table.
Who can share some thoughts on this?
Derek

It is NOT about sequence.
It is about how to point which configuration file to be used by deployed packages as during the "dtutil.exe"
deployment, you dont have chance to identify which physical location confg files to be used.
Derek
That you do only at the time of execution of packages. By default it uses configuration settings created at design time within the package. If you want to override it, you can use \Configfile switch of dtexec for that. You can also set explicit values for
properties using /SET switch
http://technet.microsoft.com/en-us/library/ms162810(v=sql.105).aspx
See this to understand how configs are applied in runtime
http://technet.microsoft.com/en-us/library/ms141682(v=sql.105).aspx
and this to understand behaviour difference in ssis 2008
http://technet.microsoft.com/en-us/library/bb500430(v=sql.105).aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to tell which version boot camp?

It's such a simple question - *How can I tell which version of Boot Camp my machine is running right now?* - but the answer is oh so elusive...
Get Info on the partition doesn't tell me, About This Mac More Info neither (unless I don't know where to look and somebody can set me straight.) Running through searches at Apple and similar, including forums using (eventually) only the word "version" hasn't helped to figure out how either, nor has Google with a bit more than "version" obviously, else I'd be at it still. And the version on the Boot Camp Assistant.app in Utilities doesn't seem to jibe with anything, much.
Answer?

Thank you. That helps.
Do you know if that's truly the version of Boot Camp itself, or merely the version of the Boot Camp Control panel? Apple doesn't seem to address this anywhere that I can find, but over time I've noticed the different pieces, like the Boot Camp Drivers "bundle" and, in this instance, features like the Boot Camp Control Panel do indeed have different versions. As an example (and for my confusion) on my system the Bootcamp.exe file is version 3.0.0.1 and the product version is 3.0, but "About Boot Camp" from the icon says 3.1 and the Drivers Update 2.1... In the Properties for BootCamp.msi under Comments it says 3.0.0 (and also present is a revision number which doesn't fit its {}.) All this in Windows, of course. In OS X (10.6.4 Snow Leopard) the Boot Camp Assistant.app is version 3.0.1. So, to summarize, I seem to have versions 3.0 and 3.1 concurrently - I'm less worried about the Windows drivers. Those can be updated independently, and I don't use iSight in Windows anyway.

How to tell which version of 1130AP

The Aironet 1130AG Series is available in:
A lightweight version
An autonomous version that can be field-upgraded to lightweight operation
A single-band 802.11g version for use in regulatory domains that do not
allow 802.11a/5 GHz operation
Is this firmware/software only, or is the hardware different.
How do I tell which one I have?
Thanks.

A lightweight version
An autonomous version that can be field-upgraded to lightweight operation
Software.
Do a "dir flash:"
If the IOS is "K9W7" then it's autonomous. If it's "K9W8" or "rcv" then it's LWAP.

How to tell which version of ipad I have?

I would like to know which version of the ipad I have and how to tell if its ipad2 or ipad3 ? I offten get this question but not sure how to properly answr it.

Here's the various iPad model numbers and order numbers. The model numbers are on the back of the iPad
Apple iPad Wi-Fi (Original) 16, 32, 64 GB
The wi-fi only iPad configurations are assigned model number A1219.
MB292LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MB293LL/A and the 64 GB configuration is assigned MB294LL/A.
Apple iPad Wi-Fi/3G/GPS (Original) 16, 32, 64 GB
The Wi-Fi/3G/A-GPS iPad configurations are assigned model number A1337.
MC349LL/A is the order number for the 16 GB configuration. The 32 GB configuration is assigned MC496LL/A and the 64 GB configuration is assigned MC497LL/A.
Apple iPad 2 (Wi-Fi Only) 16, 32, 64 GB
The wi-fi only iPad 2 configurations are assigned model number A1395.
MC769LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC770LL/A and the 64 GB configuration in black is assigned MC916LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC979LL/A, MC980LL/A, and MC981LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC954LL/A and MC989LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/GSM/GPS AT&T) 16, 32, 64 GB
The Wi-Fi/GSM/GPS iPad 2 configurations are assigned model number A1396.
MC773LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC774LL/A and the 64 GB configuration in black is assigned MC775LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC982LL/A, MC983LL/A, and MC984LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC957LL/A and MC992LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 2 (Wi-Fi/CDMA/GPS Verizon) 16, 32, 64 GB
The Wi-Fi/CDMA/GPS iPad 2 configurations are assigned model number A1397.
MC755LL/A is the original order number for the 16 GB configuration in black. The 32 GB configuration in black is assigned MC763LL/A and the 64 GB configuration in black is assigned MC764LL/A. The original 16 GB, 32 GB and 64 GB configurations in white are assigned MC985LL/A, MC986LL/A, and MC987LL/A, respectively. On March 7, 2012, Apple discontinued the 32 GB and 64 GB configurations and assigned new order numbers of MC755LL/A and MC985LL/A for the black and white 16 GB configurations, respectively.
Apple iPad 3rd Gen (Wi-Fi Only) 16, 32, 64 GB
The Wi-Fi Only iPad 3 configurations are assigned model number A1416
MC705LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC706LL/A and MC707LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD328LL/A, MD329LL/A, and MD330LL/A, respectively.
Apple iPad 3rd Gen (Wi-Fi/4G LTE AT&T/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE AT&T/GPS iPad 3 configurations are assigned model number A1430
MD366LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MD367LL/A and MD368LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD369LL/A, MD370LL/A and MD371LL/A, respectively
Apple iPad 3rd Gen (Wi-Fi/4G LTE Verizon/GPS) 16, 32, 64 GB
The Wi-Fi/4G LTE Verizon/GPS iPad 3 configurations are assigned model number A1403
MC733LL/A refers to the 16 GB configuration in black. The 32 GB and 64 GB configurations in black are MC744LL/A and MC756LL/A, respectively. The 16 GB, 32 GB and 64 GB configurations in white are MD363LL/A, MD364LL/A, and MD365LL/A, respectively.
 Cheers, Tom

How to tell which device in-app purchases were made from?

When looking at account purchase history, how can I tell which device purchases were made from for in-app purchases?

Hey HeardItHere,
You can view your purchase history by checking iTunes. It will include in-app purchases. You can find out how to do so here:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Also, you'll receive an invoice by email each time your credit card is charged. An invoice is sent approximately every $20 or 12 hours, whichever occurs first.
Sincerely,
Delgadoh

How to tell which codec

Similar Messages

Maybe you are looking for