How to tell which maps are the latest?

I have Maps v3.01 loaded on my 6710 Navigator (came with free worldwide licence) and Map Loader v3.0.28 on my PC.
How do I tell which maps are loaded on my Nokia and what version/date the maps availalble on Map Loader are?
Map Loader does not state which maps are already on my phone, nor does it state the date or version of the maps which can be uploaded.
Obviously, I'd like to install newer versions of my country map if and when it is available, but how do I know which version is available and which I already have?
Ovi.com does not seem to be the answer either as all maps were downloaded using Map Loader.
Solved!
Go to Solution.

If you already have a free worldwide license and V 3.01 is working well for you then you are right to leave it for the moment. I hear of problems searching for addresses etc with V3.03. Can always update later when everything is sorted.
I believe if you delete all your maps and then use Ovi Suite to download new maps, Ovi Suite will at least tell you what maps you have on your phone. I haven;t tried it myself because I can't stand Ovi Suite.
Speed warning is available for Ireland but just like you I have to import the speed camera locations as landmarks. Hopefully, we will see these as new features in future updates.

Similar Messages

How to tell which items are in iTunes library on disc but not in program library?

I made a mistake the other night and I deleted some items from my iTunes library ... but NOT from disc.
These items are still in my 65 gig iTunes library on disc. Somewhere.
I'd like to re-add these songs. Is there any way to tell which songs in the iTunes library on disc are not in the iTunes program library?
I don't want to have to add all 65 gigs again and then remove all the duplicates
thanks!

You should try dragging some files already in the library into iTunes to see what happens. I just did, and the new iTunes 10.6 seems to be ignoring them. I then made a copy of a file already in the library, and I added both it and the original by dragging and dropping. Only the new file was added. There was no warning about duplicates in either test. So you may be able to drag your whole library back into iTunes.
For when you do want to determine what files on disk aren't in the iTunes library or vice versa, here's one way to do it (if there's an easier way, I'm all ears):
Export your library as a playlist to a text file.
Use a program that can recursively list all your files on disk as full paths and save its output to a text file.
Load the into a decent text editor. I use Notepad++. Then use a regexp search/replace to tidy up the files so that both consist of one fully qualified filename per line.
Sort the files.
Diff the files and examine the differences.
I can do both 4 and 5 in Notepad++.

How to tell which Indexes are not being used?

We are a large development shop and have many customers. Our database design is very generic so that it works for all of our customers. Each night we use an SSIS ETL process to bring down large amounts of data from the iSeries into SQL. One
particularily large customer takes a very long time and we are looking for ways to speed up thier data import and transformation. I would like to see which indexes he does not use and possibly remove them. Each night we fully repopulate hundreds of staging
and ods tables and incrementally delete and repopulate the days work for a handful of history type tables. Removing some indexes off of the large tables could make a big impact.
How can i tell which indexes the customer does not use?

> IDENTIFYING UNUSED INDEXES IN A SQL SERVER DATABASE
Just because an index is not being used does not necessarily mean it should be removed.
> Index This: All About SQL Server Indexes
sp_BlitzIndex
José Diz Belo Horizonte, MG - Brasil

How to tell what maps are loaded?

Please forgive me if this has been asked already:
I have an N95 8GB, over the past few days, I've been playing around with the Map Loader program, loading different things up and deleting them. But, I can't remember where I left it, and which maps I have and haven't loaded yet. Is there any way of telling what maps have been loaded onto the device already? Maybe using the Map Loader or via the phone itself?
Also, after I've loaded a few maps to the phone via map loader, is there any way to delete just some of the maps already loaded, but not all? When I was using the Map Loader, it didn't seem to give an option to delete some. It appears to be just a Delete All.
Thanks!
Kev

That is the annoying thing about Map Loader. You have to delete all maps to delete just one.
Anyway, it isn't all as bad as it sounds because Nokia Maps update their maps twice a year so you should reload your maps every 6 months to make sure you have the latest map anyway. So every 6 months I delete all maps and reload the ones I want.

How to tell which files are masters

I have a library that i imported with over 3000 pictures, but i dont know which ones are masters

Still trying to sort this out: Where does the User Manual define " image"?
From the Glossary;
image
An artifact that reproduces the likeness of some subject, usually a physical object or person, also known as a picture. See also image selection, photograph, picture, subject.
image selection
Refers to an image or group of images selected in the Browser or the Full Screen view filmstrip. A white rectangle surrounding an image indicates it is selected. See also Browser, Full Screen view, image.
These two entries appear to me to be inconsistent:
The first definition defines "image" as a real world object and does not state its relations to Aperture items.
The second entry uses the term "image" for items selected in the film strip. Here I see the interpretation that Kirby uses.
The term image (in Aperture "speak") seems to need clarification - being used for image versions and "pictures" at the same time.

How to tell which pages are linked to a template

How can you tell, from a template, all of the pages which it affects.
I have some "junk" templates that are from previous experiments which I am trying to remove, I wouldn't want them to be a part of something important.

Do a simple search on source code in your entire site for the name of the Template file. You will get a Results panel showing every instance of that filename...specifically each page that uses that Template will be on that list.
Ctrl > F > [Find in:] Entire Current Local Site > [Search:] Source Code > [Find:] filename.dwt [Enter/Return]
Beth

Change Data Capture How to Tell which you are running Sync or Asyn

Hi ,
I am taking over a new system that has change data capture running, but Im really confused how this is running. Most of the CDC is set up using Sync(triggers), but I have about 5 tables that DO NOT have system generated triggers on them. I know Streams is NOT running/configured. I know Capture is not running/configured (because nothing in DBA_CAPTURE table). I can tell that these 5 tables are still getting updated in the change table schema. I can not figure out how the 5 tables that DO NOT have triggers on them are updating the change data set tables.
I had thought the the 5 tables, must be configured with HOTLOG, but when I look at the CHANGE_SETS table they all (including these 5 tables) are set to CHANGE SOURCE NAME = SYNC SOUCE. I would expected that to be HOTLOG_SOURCE. So I "assume" they aren't set up using Asnc. hot log mode. So maybe the other Async modes are used, but not pushed to another database? Is that possible?
Any other ideas on how to figure out how the CDC is set up for these 5 tables?
thanks for your help.

Thanks for the reply, but I think I must have not stated the problem clearly. I dont WANT to set the source I want to figure out how this CDC is working. I see ALL the sources are currently set to SYNC_SOURCE. Almost all of the tables are set up with system triggers on them, but 5 dont have system triggers, yet the source says SYNC_SOURCE. I did validate that the change tables are getting updated for these tables. my question is how are they getting updated? I "assume" since they dont have system triggers ont eh table they aren't synchoronus cdc (like the other tables are). yet the source says SYNC_SOURCE. What am I missing? How can I tell if the redo log is populating those changes tables? Im pretty sure it is (Becuase there aren't triggers or jobs running), but Im curious if there is a way to tell for sure.
Thanks,

How can i tell which device made the itune purchased

hi every one i just want to know how to tell which device made the purchased in itune thanks.

Not much you can do...unless the bill indicates the class of device, such as iPad, so you can narrow it down.
If all have access to the same accounts using the same credit cards and do not have to identify themselves, there just isn't much you can do to tell who did the download.

Which maps are loaded on my phone?

I'm using Nokia Map Loader to install maps on my phone for the various countries I travel to, but how can I tell which maps are already present on the phone?
I can't see any way to determine if a particular map is already installed, or whether it's the latest version. It seems the only way to be sure you have the latest map is to download and install it again. The maps for some countries are over 100MB in size, so it would be nice to avoid doing that if it's not necessary.
Chris

Unfortunately it isn't possible to tell what maps you already have with the current version of Map Loader.
However, there is no harm in regularly downloading map data, even if you already have it as the maps are regularly updated. I actually make it a point to regularly download all the maps I refularly use. The new maps will just overwrite the old and I am guaranteed the latest maps.

How to know you've got the latest firmware?

I know that the firmware (Boot ROM) and SMC versions can be found in System Profiler, but how do you know they are the latest versions available?
Looking at the possible firmware updates on Support/Downloads they don't seem to include a version, just release date.

I believe the latest version of the SMC firmware is 1.2f10. If you download an updater and try to apply it, it will only proceed if the firmware image contained in the update is later than the one on your machine.

HT4914 How can you tell which songs are downloaded from the cloud on an ipad

How can you tell which songs are downloaded on the iPad from the cloud?

I know ipad albums are more like tagging photos rather than putting them in folders. I just have a nagging feeling I missed some pics and I have too many to try to go figure out one by one. I don't look at my photos from the camera roll, only from albums I tagged just because I imported photos from different sources and the dates and order is really messed up. I just want to know that I am viewing all the photos from like this vacation or that event and there's none I missed that are only in the camera roll.

How to tell which photos in iPhoto are HDR images.

Does anyone know how to tell which photos in iPhoto are HDR images. When I click on the Info button for the image it doesn't indicate if it was an HDR.
Does anyone have any information about this?
I'm using a new iPhone 5s with basically a new iMac.
Thanks,
Hagrid...

You can do a filter on your library with "File Status" is "Missing". The "File Status" query is not available by default, but you can add it by clicking the upper-right button in the filter window.
nathan

Map Loader should tell me which maps are already i...

Hi!
I've tries many ways, but haven't found a way for Map Loader to tell me which maps are ALREADY in my device. Which means that every time I go to a country, I have to try to remember if I had already uploaded that map to my device... or not.
Is there a way to figure out easily what maps are already present in my phone? And while we're at it, what voices?
Also, as a natural consequence, I'd like to be able to remove voices or maps individually.
This seems like basic functions that TomTom has had for, well... forever.
Gilles.

But there's no similar for maps. Even with latest Ovi Maps.
Hi ggravier
Ironically in Nokia Maploader for Mac which is a stripped down version there is a download history which although not perfect does give you some idea!
Happy to have helped forum in a small way with a Support Ratio = 37.0

HT201302 I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks

I am trying to upload pictures from my phone to my computer and I'm getting an error message that a photo is corrupted so it can't download. I don't know how to tell which of the photos is corrupted so that I can delete it and try again? Thanks!

If this is an iCloud account the Outbox only appears when sending an email, so if it is still trying I suppose it should be showing now (not sure though, hard to replicate this)
What type of email account?

How can I download apps on my old ipod touch? It tells me I need iPhone3.0 software, but iTunes tells me I have the latest available (software 2.2.1) for my iPod.

How can I download apps on my old ipod touch? It tells me I need iPhone3.0 software, but iTunes tells me I have the latest available (software 2.2.1) for my iPod.

Purchasing iOS 3.1 Software Update for iPod touch (1st generation)

How to tell which maps are the latest?

Similar Messages

Maybe you are looking for