How to telnet to Edge Switch

Dear Experts,
I'm going to try configure on how to telnet to Edge switch but still no result. My Network topology is below:
- 1 Core Switch 3560
- 3 Edge Switch 2960
I'm configured 4 VLAN:
+ Vlan 19: 10.19.10.0/24
+ Vlan 20: 10.20.10.0/24
+ Vlan 21: 10.21.10.0/24
+ Vlan 22: 10.22.10.0/24
On each Vlan, I was assigned Vlan interface IP.
I'm using VTP mode (Server and client) to trunking VLAN and Core SW is standing a VTP Server. I can telnet to Core SW using VLAN Interface IP.
The question is how can I configure to telnet to Edge SW?
Has somebody help me on this?
Thanks in advance!
JH

Hi,
From looking at your topology, the configuration should work. You should be able to telnet into the edge switches from anywhere in the network using the ip addresses of the vlan interfaces on each switch.
What exactly is the issue you're experiencing?
Are you able to ping the switch ip addresses?
Looking forward to hearing from you

Similar Messages

How to telnet to an edge switch?

We have a 6506 which have dot1q trunk links to 2950 edge switches....
my problem is that i need to be able to remotely access these 2950 switches using telnet.
Is it just a case of assigning each switch an ip address to vlan1 and also assigning an ip address to vlan1 on the 6506?
any help would be great
Cheers

Jonathan
I think you have pretty well described what you need to do. You assign an IP address to each 2950 for management purposes (all management addresses in the same subnet). By default that address is associated with VLAN 1. You also need to configure VLAN 1 on the 6506 with an IP address in the subnet that you are using on the 2950s. That way the 6506 can get to all the 2950s. You also need to provide appropriate routing so that devices in other parts of the network have routes to the subnet and the 6506 has routes to the other subnets in the network. You should then be able to telnet to any of the switches.
HTH
Rick

How to identify that a host is connected to which particular edge switch

Hello Guys
Can anybody explain how to identify that a host is connected to which particular edge switch and port in a Cisco SAN Fabric ??

Hi,
Hopefully you know the host PWWN.
If the edge switch is not in NPV mode, get the FCID from the output of "show fcns database"
The answer may also be as simple as finding this entry in the "show fcns database detail".
If not, once you have the fcid, the first byte of the fcid is the switch domain ID. With the combination of "show fcdomain domain-list vsan xx" "show fcs ie" you should be able to determine what you need.
If the edge switch is in NPV and registers as a NPV device ( Cisco switches do ), then the FCID will be assigned by the core switch upstream of that edge switch. You can see this from a "show flogi database". Find the PWWN here. There will likely be multiple entries for the port where the host is connected. Once you find the port where the NPV switch is attached. The first flogi entry on that port will be the switch WWN. Get the FCID for the switch and then find the entry for this FCID in the "show fcns database detail", this will give you the switch information.
Best regards,
Jim

How do I use Edge Web Fonts with Muse?

How do I use Edge Web Fonts with Muse - is it an update to load, a stand alone, how does it interface with Muse? I've updated to CC but have no info on this.

Hello,
Is there a reason why you want to use Edge Web Fonts with Adobe Muse?
Assuming you wish to improve typography of your web pages, you should know that Muse is fully integrated with Typekit. This allows you to access and apply over 500 web fonts from within Muse. Here's how you do it:
Select a text component within Muse, and click the Text drop-down.
Select Add Web Fonts option, to pop-open the Add Web Fonts dialog.
Browse and apply fonts per your design needs.
Muse also allows you to create paragraph styles that you can save and apply to chunks of text, a la InDesign. Watch this video for more information: http://tv.adobe.com/watch/muse-feature-tour/using-typekit-with-adobe-muse/
Also take a look at these help files to see if they help you:
http://helpx.adobe.com/muse/tutorials/typography-muse-part-1.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-2.html
http://helpx.adobe.com/muse/tutorials/typography-muse-part-3.html
Hope this helps!
Regards,
Suhas Yogin

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

How do I include 'Edge Web Fonts' into Edge Animate?

How do I include 'Edge Web Fonts' (not Google Web Fonts) into Edge Animate?

Have you tried to use google fonts? I have used them and they work for me.
When you add your font for example:
Copy paste:
<link href='http://fonts.googleapis.com/css?family=Finger+Paint' rel='stylesheet' type='text/css'>
and then for font family.
'Finger Paint', cursive;
then select addfont on the addfont screen

Can my macbook pro mid 2007 3.1 AA896ll/a handle a SSD and how do I make the switch. Can I do a clean install of Snow Leopard from an original cd

Here is my problem, I want to upgrade my macbook pro mid 2007 3.1 AA896ll/a to an Solid State Drive, a Crucial m4 256 gb, I want to know if the macbook will be able to handle it and how do I do the switch. also once I install the drive will I be able to boot from my Snow Leoard original cd and do a clean install. Thank you

Coming from a 5,400 RPM drive that's nearly filled up, fragmented and deoptimized to a fresh install of OS X on a SSD will of course be a improvement.
However fresh installing OS X on a new 5,400 RPM will also see a improvement, boot up in 30 seconds.
A fresh install of OS X on a new 7,200 RPM drive will also see a improvement, boot up in 25 seconds.
A fresh install of OS X on a new SSD will see the best improvement, boot up in 20 seconds on fast SATA connections.
OS X still requires time to setup and that takes about 20 seconds despite how fast your boot drive is, that's why sleep was created.
Things to consider: The higher cost of a SSD, the limiting capacity (hard drives hold way more up), the SATA I speed limitations (slows up on large file transfers), the difficulty to scrub the SSD of unwanted data (like you can a hard drive), and it's limited write capability. Also the smaller SSD's are faster than the larger ones.
SSD's are shock proof, which is their slight advantage over hard drives.
I see a 120GB SSD in a SATA I machine as being a waste, it's too small of a storage space (500GB+ is ideal), the SATA I connection is slow and other factors that make a 7,200 RPM drive a better option in that machine.
One can get a 750 GB 7,200 RPM hard drive for about the same price and still maximize their boot time in the process, also being able to scrub their drive of unwanted data easily.
SSD's can't be scrubbed, one has to fill 50% of the remaining space with many, very small files to overwrite the free space, then do another 50% again to defeat the Trim/wear leveling as SSD's write to less used location each time. If one fills a OS X boot drive up completely, it won't function or won't boot up.
If you do this fill routine regularly with software, then you prematurely wear out the SSD as it has limited writes. Why Disk Utility doesn't offer zero or 7x erase for SSD's.
If your in the 10% of Internet traffic that's going to adult sites, then the ability to scrub the caches and storage drive of embarrassing unwanted data is a necessity. Especially in the light of software and hardware that can read the SSD of deleted data.
Trick links and redirects on poisoned sites can firebomb your Mac with some pretty bad pictures and your hidden caches as well, especially if you don't like to pay.
IT personal have at their disposal free open source forensic software that basically aggregates all the past behavior done on the machine into a nice, easy to view format with times, dates and when and where content was downloaded from.
Since one has to give up their password for repair folks to recover data and fix the machine...
I think a SSD is less of a benefit over a 7,200 hard drive for that particular model of Mac for a mere few seconds faster boot time.

How do I uninstall Edge Reflow CC?

I recently downloaded the app because I was curious about using it. Now I'm having issues on my print files (end of file) and the stability of Photoshop CC when I do things like adding layer masks and vector masks. When I look at the dump for output it's indicating that I'm using an unsupported layer type due to Reflow.
How can I uninstall Edge Reflow CC? I have an uninstaller for Edge Animate CC, but not one for Edge Reflow CC.
Applications > Utilities > Adobe Installers
Mac OS X 10.8.5
Thanks for any (helpful) responses in advance.

I said dump, I meant log. I didn't get a screenshot of the message. It said something to the effect of Generator had and error and close Photoshop. When I tried to save my files I received unexpected end of file encountered upon reopening the files upon restarting Photoshop. The first time I received a message was on creation of a layer mask from a vector path. The second time was in a different file, I was converting the vector path to a vector mask. Luckily I saved the original file. It's just a jpg. I was eventually able to edit the file (3 attempts).
[1;31mUnknown layer type, something is wrong with the document
[0mHandling an unknown change by deleting all generated files and resetting the state
Getting document info with these params: {"documentId":78,"flags":{"compInfo":true,"imageInfo":true,"layerInfo":true,"expandSmartO bjects":false,"getTextStyles":true,"selectedLayers":false,"getCompSettings":true}}
Photoshop message: {"id":16,"body":{"version":"1.0.0","timeStamp":1383789844.116,"id":78,"file":"/Volumes/cl ients/client/Images/industrial/hpu/G-18-T.jpg","bounds":{"top":0,"left":0,"bottom":1015,"r ight":2035},"selection":[0],"resolution":300,"globalLight":{"angle":120,"altitude":30},"ge neratorSettings":false,"layers":[{"id":4,"index":0,"type":"layer","name":"Layer 0","bounds":{"top":58,"left":54,"bottom":942,"right":1988},"visible":true,"clipped":false ,"mask":{"bounds":{"top":58,"left":54,"bottom":942,"right":1988}},"pixels":true,"generator Settings":false}]}}
Received complete document: {
    "version": "1.0.0",
    "timeStamp": 1383789844.116,
    "id": 78,
    "file": "/Volumes/clients/client/Images/industrial/hpu/G-18-T.jpg",
Also
Resetting state for document 78
Document path changed from "/Volumes/clients/client/Images/industrial/hpu/G-18-T.jpg" to "/Volumes/clients/client/Images/industrial/hpu/G-18-T.jpg"
Scheduling change to layer 4 of 78
Creating layer context for layer 4
Photoshop message: {"id":16,"body":"[ActionDescriptor]"}
[1;31mUncaught exception on Wed Nov 06 2013 21:04:04 GMT-0500 (EST):
Error trace: TypeError: Cannot read property 'name' of undefined
    at startLayerUpdate (/Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/Generator/assets.generate/main.js:1001:70)
    at /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/Generator/assets.generate/main.js:980:21
    at runPendingUpdates (/Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/Generator/assets.generate/main.js:956:38)
    at null._onTimeout (/Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/Generator/assets.generate/main.js:982:17)
    at Timer.listOnTimeout [as ontimeout] (timers.js:110:15)

How do i add Edge animate .oam files to Fixed Layouts Epubs in Indesign cc 2014?

How do i add Edge animate .oam files to Fixed Layouts Epubs in Indesign?

Hi,
There is a bug on iOS7 which does not let edge animate work correctly here. This issue will happen on iPad and not on Mac OS.
There is a similar thread that explains in detail this issue you are facing:
https://forums.adobe.com/thread/1513879
Regards,
Pooja

How do I import Edge into muse?

How do I import Edge into muse?

Hi,
Please refer to the following link http://helpx.adobe.com/en/muse/tutorials/inserting-edge-content-muse-website.html
Regards,
Aish

How do you put edge animation in Magento?

How do you put edge animation in Magento please?

Provide the name of the program you are using so a Moderator may move this message to the correct program forum
This Cloud forum is not about help with program problems... a program would be Photoshop or Lighroom or Muse or ???

How do you upload Edge Animate on Adobe CDN?

How do you upload Edge Animate on Adobe CDN?

Hi Darrell,
I'm using an exciting new software package called www.webflow.com and I asked the following question in a forum:
Hi,
How would you add this Edge Animate to Webflow? Is it possible?http://html.adobe.com/edge/animate/showcase/interactive-marquee/11
The files are available here: http://html.adobe.com/edge/animate/showcase.html6
Edge Animate gives you a few different option for publishing:
The drop down that you see in the image next to "Chrome Frame Installer" has three options:
Now Prompt
iFrame Prompt
Overlay Prompt
These are the files saved when only "Publish content as static HTML" is checked. See "Publish Settings" image:
Is it possible to add this animation to a Webflow site?
If yes, any suggestions on how would be greatly appreciated.
Thanks,
Todd
Here's Sergie's reply:
Hi @TStanwood, it's possible, but the only way to do it is if you host your files on Adobe CDN or if you host it on your own server and then display an iframe with the index file in Webflow.
That's the way to do it before we allow for hosting of non-image files on Webflow.
After you have them hosted on your own server you can follow these instructions found on the Adobe forums:http://forums.adobe.com/thread/1166851
You'll have to add this to your head code:

    <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/chrome-frame/1/CFInstall.min.js"></script>
    <script type="text/javascript" charset="utf-8" src="Bannerad_edgePreload.js"></script>
    <style>
        .edgeLoad-EDGE-160548878 { visibility:hidden; }
    </style>

Replace Bannerad_edgePreload.js with the link to your server and the edge js file.
And in the Webflow add a div block with the class EDGE-160548878 and id stage and the .js file should inject your html animation file into this div block.
<div id="Stage" class="EDGE-160548878">
</div>
I don't have a server to upload the files to. I really don't even know what any of this means.
I'm wondering how and where I can upload the Edge Animate files to and then link to it by following the instructions above.
Any help would be appreciated.
Thanks,
Todd

How do you connect edge inspect with chrome !?

how do you connect edge inspect to chrome

If you install the Chrome extension then Edge Inspect will syncronize with whichever page is in the current tab.
=Ryan
[email protected]

How do I use a switch with a null variable?

Here is my current situation...
I have a form that will take the inputted information in the field "LEDIR" and divide it by the information in field "AMMO". I get errors when the form is first loaded because the field "AMMO" is blank and causes a "Divide by 0" problem.   I tried to solve the problem with a switch, but an not sure how to create a "null" switch case. Here is what I have.. any ideas as to how I can set the second case so it returns a "0" for a null AMMO field?
var InvR = this.getField("LEDIR").valueAsString;
var AmmoPk = this.getField("AMMO").valueAsString;
switch (Ammo)
case "0":
   event.value = 0;
   break;
case "[what do i put here?] ":
   event.value = 0;
   break;
default:
   event.value = (Math.floor(InvR/AmmoPk))
any ideas as to how I can set the second case so it returns a "0" when the AMMO field is empty?

You can even stack the 'case' to create and 'OR' type of selection:
var InvR = this.getField("LEDIR").valueAsString;
var AmmoPk = this.getField("AMMO").valueAsString;
switch (Ammo) {
case "0":
case "":
   event.value = 0;
   break;
default:
   event.value = (Math.floor(InvR/AmmoPk))
But it is just as easy to use:
var InvR = Number(this.getField("LEDIR").value);
var AmmoPk = Number(this.getField("AMMO").value);
event.value = "";
if(AmmoPk != 0) {
event.value = (Math.floor(InvR/AmmoPk))

How to stop multiple auto-switching to address bar every time I open a new tab and try to type something anywhere outside of address bar?

How to stop multiple auto-switching to address bar every time I open a new tab and try to type something anywhere outside of address bar? Like something just wants me to use that embedded search when u type something not-web-address in address bar and hit enter. And the most ridiculous thing is that it happens repeatedly on like every second, like I just move down from address bar and start typing again, but then again it switches me to address bar, and 3, 4 times like that. And the result is also that I can't see the address of that page.
I think its has something to do with my AVG antivirus, because this started the same time some AVG Nation started to appear in every new tab i open (and thats also irritating me, I read about it here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I dont want to lose all my settings) but when i type something in address bar and hit enter it opens the search results in Google.
Please try to help me, I like Firefox but I must switch to Chrome until I fix this problem.
Thanks in advance

First, please update to Firefox 32. 22 is no longer support nor is it secure. Then let us know if you still have this problem. [[Update Firefox to the latest version]]

How to telnet to Edge Switch

Similar Messages

Maybe you are looking for