How to temporarily suspend backups for a host?

We are running production OSB backups for a site with approximately 50 filesystems,
consisting of full, incremental, quarterly archive, and on-demand archive backups.
Our installation consists of
o administration master - obtool version 10.4.0.2.0 (64-bit OEL 5.8)
o media servers - obtool version 10.4.0.2 (64-bit OEL 5.8)
o SL8500 library - managed by ACSLS 8.1 with admin server attach point
Problem:
We recently lost a ZFS storage appliance storage pool due to pool corruption.
All backed-up filesystems were restored to another host pending a rebuild of
the corrupted ZFSSA.
Currently all backups are fail because they cannot communicate with the down
host. We want to suspend all attempts to back up the corrupted host pending
the rebuild. We have tried taking the host out of service via 'chhost -O'
but the scheduler launches backups that hang indefinitely with a session
status of 'awaiting resource availability'.
Is there any way to suspend backups of a host temporarily without having to
remove it from all the schedules it's in? Seems there should be but I've
been unable to find this in the docs.
Appreciate any help.
Thanks,
-pc

You can just comment it out of the dataset using a #
Then when you're ready to put it back, just uncomment it again.
Thanks
Rich

Similar Messages

  • OBIEE 11g - How to configure Virtual IP for servers hosting OBIEE 11g

    Hi,
    I have 2 Linux servers.
    I have installed OBIEE 11.1.1.6 on first server and did a scale out on second server.
    I don't have a Load Balancer.
    I want to configure Virtual IP for these hosts.
    Please advise how to do it.
    Thanks
    Nitin Aggarwal

    Refer to below lhks.
    http://www.rittmanmead.com/2008/12/obiee-high-availability-the-bi-server/
    http://www.rittmanmead.com/2009/02/obiee-high-availability-presentation-services-and-scheduler/
    Thanks
    Jay.

  • How to monitor Log Backups for MS SQL Server

    Hello all.
    We are running Solution Manager 7.1 on SP Stack 10 and have downloaded the latest template content.
    When configuring the templates for DB monitoring, we noticed that although there is a metric that monitors the age of the last DB backup, there is no such metric to monitor the age of the last successful Log backup, or even a metric to alert us on a failed backup / log backup.
    Has any of you ever had to create a custom metric to monitor either the age of the latest successful log backup for MS SQL Server, or a custom metric to alert on failed backups / log backups?
    If yes, could you provide some instructions on how to create such a metric?
    Thank you in advance for your answers.
    Phevos

    Divyanshu, thank you for your answer.
    I had a similar idea to check the DB log file for failed log backups. The problem is that when I opened the log file from the dbacockpit, I found no errors/warnings for the days that our log backups did not run or failed. Here is a small part of that log to show you what I mean. In this example, the log backup was not running from 25th of July until the 28th of July when we fixed the log backups again, after receiving a disk space warning (log disk drive was almost full):
    The last successful log backup is mentioned in the log: "20140724091524    Backup    Log was backed up"
    Then as the days go by, there is no backup failure entries whatsoever to look for them in the log:
    20140725000023    spid18s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140725000023    spid18s    AM (UTC). This is an informational message only; no user action is required.
    20140726000020    spid21s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140726000020    spid21s    AM (UTC). This is an informational message only; no user action is required.
    20140727000023    spid22s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140727000023    spid22s    AM (UTC). This is an informational message only; no user action is required.
    20140728000022    spid17s    This instance of SQL Server has been using a process ID of 1304 since 5/27/2014 11:50:00 PM (local) 5/28/2014 6:50:00
    20140728000022    spid17s    AM (UTC). This is an informational message only; no user action is required.
    Until finally on the 28th we restored the log backup functionality:
    20140728042814    Backup    Log was backed up. Database: XXX, creation date(time): 2010/12/22(16:45:29)
    So, I find it difficult to deduce an appropriate string to look for in the log, in order to generate an alert when my log backups are not working.
    Any suggestions? Am I looking at the wrong place perhaps?

  • How to schedule the backup for sqlserver2005/ECC5.0

    Dear all
      Our system inlude: ECC5.0,sqlserver2005,windows2003 server.I want to know that how can i implement the backup for the sap system ?
      If i use the DB13 to backup sap system ,i have to load/unload the tape manually.
      1) we use the tape library,how can i schedule the backup automatically?Maybe seems that no 3rd software can do the backup through DB13 basing sqlserver .
      2) If i want to backup automatically ,i have to backup the sqlserver directly and donnot use the DB13 ?what's the risk between them ?
    Thanks erveryone.

    Hi Dipendra,
                         For running the Adobe application You need to configure some thing in both Java as well as in ABAP stack for that abobe form application to work. You need to do some configuration in the Visual administrator for Java & also in the ABAP stack sidi using your SAP user id line creating ADSUSER , ADS_AGENT    user id creation and roles assignment and RFC destination creation etc..          
    Just refer these documents for the installation and post-configuration of Adobe Document Service on NW2004s.
    https://websmp105.sap-ag.de/~sapdownload/011000358700003982082006E/InstallADSNW2004s_Jun06.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005526362005E/ADS_NW2004s_SPS12.pdf
    https://websmp105.sap-ag.de/~sapdownload/011000358700005299622006E/ADS_SizingNW2004sV2_1.pdf
    You can start by read the note 736902 to get the credentials for the ADS.
    Hope this answers your question.
    Thanks,
    Greetson

  • How to make a backup for my tabs?

    I need te reinstall windows and therefor i want to make a backup for my bookmarks. How can i do this?

    The [[Backing up your information]] article has instructions on how to backup your entire [https://support.mozilla.org/en-US/kb/Profiles Profile], which contains your settings, saved passwords, browsing history, and other data. If you just want to backup your bookmarks, the [[Backing up and restoring bookmarks]] article can help.

  • How to schedule offline backup for SAPDB or maxdb

    Hello,
    I have stand alone SAPDB server ( without SAp system) , I wanted to know how to schedule the OFFline backup for SAPDB.
    Can yo tell me the command to schedule the offline backup .
    Command should do like:
    1) bring the DB to admin mode.
    2) start offline backup .
    3) bring the db up after backup done
    Regards,

    Did you read the available documentation?
    > 1) bring the DB to admin mode.
    dbmcli -u control,<password> -d <database> db_admin
    > 2) start offline backup .
    dbmcli -u control,<password> -d <database> backup_start <medium>
    > 3) bring the db up after backup done
    dbmcli -u control,<password> -d <database> db_online
    Basically you can do the same when the database is online, all backups are consistent, there's no difference in "offline" or "online" backup as with other databases (e. g. Oracle).
    Markus

  • HT4623 How can i do backup for my ipad?

    could u tell me how can i backup for my ipad? And then i can't not download the latest version.my ipad is ipad4-128GB.

    TThere was a link to the backup article in the Updating your iOS device article that led you to this forum. Take a look at this.
    Back up and restore your iOS device with iCloud or iTunes
    And what do you mean by I "can't not" download? A double negative makes it confusing. What are you asking about?

  • How to open TM backup for other laptop on LaCie connected by USB to TC?

    My husband's laptop may be dead, and we need to access the TM backup for it from my laptop. I have tried following the instructions to "Browse Other Time Machine Disks" over the wireless network but something isn't working right since I don't even consistently see the sparse bundle for my own laptop, and the LaCie drive connected to the TC doesn't seem to be recognized at all.
    This is what we're working with:
    my laptop: MacBook Pro/10.5.8
    his laptop [possibly defunct]: iBook G4/10.5.?
    500G TC - my TM sparse bundle (plus other files);
    160G LaCie drive; 4 partitions, 1 about 85G, with his TM sparse bundle (plus other files).
    Backups were runninng wirelessly after initial creation over Ethernet.
    I've tried connecting the LaCie to my laptop directly via USB and Browsing for Other TM Disks, and still nothing. I checked permissions on the partitions, and they seem okay. Can I force it to mount his backup file somehow? All four partitions on the LaCie show up as Sharepoint folders under the Shared TC when I'm using the wireless network, but the LaCie isn't readable by Disk Utility unless I'm directly connected.
    Any help appreciated, as he needs files from the backup for his consulting work, of course. Thanks!

    Betsy F wrote:
    I've tried connecting the LaCie to my laptop directly via USB and Browsing for Other TM Disks, and still nothing. I checked permissions on the partitions, and they seem okay. Can I force it to mount his backup file somehow?
    Hi, and welcome to the forums.
    You should be able to mount the sparse bundle (either wirelessly or with the drive directly attached) by double-clicking it via the Finder. Then it should show up on your desktop and/or Finder sidebar, and in the Browse window.

  • How can i take Backup for my WLC 5508

    Plz help me to take backup for WLC 5508
    Sent from Cisco Technical Support Android App

    Check here:
    http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_managing_ctrlr.html#wp1196069

  • How to create a backup for VISTA?

    I bought my computer one year ago. there was no CD/DVD included for the Vista operation system.
    Now my external heard drive died, I can't recover the information, where I had the backup.
    It wasn't me who did the backup the first time, so can I do a new backup? How do I do it and which program is best to use?
    Thanks for the help!

    Hello
    The whole story is not described well and we don't know what do you mean exactly.
    The question is: why you write about external HDD?
    External HDD has nothing to do with recovery image.
    Recovery image can be created if recovery image is originally placed on second partition in folder caller HDDRecovery. If the image is not on the right place Toshiba recovery disc creator cannot find it and recovery DVD cannot be created. I presume this is exactly what happens with your notebook so I think you will not be able to create recovery disc.
    You have two options now:
    # To order original recovery disc by Toshiba - https://backupmedia.toshiba.eu/landing.aspx
    # install Vista using Microsoft installation disc. All necessary drivers, tools and utilities you must install alone. you can find them on Toshiba support page - http://eu.computers.toshiba-europe.com

  • How to find domain name for the host

    I have found the hostname but I am not able to find the domain name , how can I do that?? From the forums I was able to understand why the BSP Application was not displaying but unable to execute the same as I was unaware of the domain name.
    Thanks in advance.
    Regards,
    Narayani

    Hi Narayani,
    What about doing something like this?
    data: urls type tihttpurls2,wa type IHTTPURLS2, host type string.
    call method cl_http_server=>get_extension_info
    EXPORTING
    extension_class = 'cl_http_ext_bsp'
    IMPORTING
    urls = urls.
    concatenate sy-sysid '.' into host.
    translate host to lower case.
    loop at urls into wa.
    replace host in wa-host with ''.
    endloop.
    The idea is that you get all the possible URLs and then delete the host part of it. Then you get the domain.
    Eddy

  • How to create an backup for Satellite L20-100?

    My Satellite L20-100 crashed & it took me 24 hours to recover (using factory supplied product recovery CD) & to reinstall other software & updates.
    Now I am scared it may crash again & I have 11GB of software applications. I had a function on my Windows XP console startup > programs > accessories > system tools > create backup (or recovery) disk before it crashed, but it is not present anymore.
    ANY THOUGHTS? URGENT PLZ!

    I recommend you to use very good third part software called NORTON GHOST. I use it for a years. You can create own recovery DVD and use it anytime when there is some problem.
    I do the same thing. This self created image is saved on partition D. if I want to have clean installation I simply start GHOST and the partition C will be overwritten.
    If you need more info please let me know.

  • How do I configure Apache for Virtual Hosts?

    This is whatI've done so far: I have a static IP. I have a registered domain name that points to this IP. I've made my sites in iWeb. Set up my computer for Personal Web Sharing. I've used Smultron to edit the httpd.conf files per this tutorial : http://www.macminicolo.net/videos/ServerVideo6.mov. Still no luck. I can't access the site from the internet.
    Can anyone shed some light ?

    Hi Joe,
    Se if this helps...
    http://mark-kirby.co.uk/2008/setting-up-virtual-hosts-on-os-x-leopard/

  • How can I disable backup for managed app with profile manager?

    I use Server App 3.1.2 to manage iOS devices with profile manager.
    Is it possible to exclude managed app's backup from users iCloud or iTunes backup?
    thanks
    Paolo

    Hi,
    Please use the following link (under "Manage Print Apps" to cancel/remove it:
      http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&cc=us&dlc=en&lc=en&product=5058336&tmp...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Make equalizer backup for Xfi Xtrememusi

    Im using Xfi XtremeMusic sound card and i was wondering where and how can i make backup for my settings. I tried with regedit search for something but i cant find something usefull. I also tried serach in install directory but no success.
    Id like to have backup file for equalizer and game mode settings, but if it can be done then id like to have backup for all the settings.
    TY

    Maybe you figured it out already but, IIRC, X-Fi stores some settings data into file named as PCI_BUSXXXX-X-XXXXXXXX-XXXX.dat (where x's are numbers)?
    Path for this file is C:\Documents and Settings\All Users\Application Data\Creative\CADI\Preset
    jutapa

Maybe you are looking for