How to terminate product type 60A?

User created the contract with product type 60A. However, this conrtact was cancelled.
Could you please suggest, what function that normally use to terminate contract?
Best regards,
Osathee

Dear Osathee,
The normal process for a deal and its flows getting posted is:
1) You create contract
2) You then settle the contract.
2) You post the flows using TBB1.
Reversal of a deal actually means reversal of the deal to last status. Lets say your deal is in settled state, so reversal would bring it back to the contract state.
Now,  if you want to reverse this deal from settled state, follow the steps.
1) Reverse the deal to bring it to contract state.
2) If you had posted the flows, reverse them using TPM10.
Now, you will have a deal in contract state with no posted flows.
Now, just reverse the status of the deal using TX04 once more. This will cancel the deal. After this, you will only be able to view the deal.
Regards,
Jitesh

Similar Messages

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How to use BAPI function module for maintaing product type to material

    Hi,
    Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
    for maintaining the product type for the material using change number.
    Pts will be rewarded.
    Best Regards,
    Padhy

    Hi,
    Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
    for maintaining the product type for the material using change number.
    Pts will be rewarded.
    Best Regards,
    Padhy

  • Product type 04I - subledger flows - how do I post?

    Hi All
    I am able to set up a fixed interest bond after I set up the security class & the security account for it.  I see that the conditions specified in the class determines the subledger position indicator & te security account position indicator.  But I do not see these flows in the 04I instrument's cash flow tab.  I tried to post TBB1 & only the 0100 & 0870 flows are getting posted. 
    I tried TPM44 but it says accrual is not configured for the product type which is right as I do not see any accrual config for securities. 
    My main question then is how do I get the subledger position flows to post?  Second question is, is accrual relevant to securities?  If yes, how do I set that up?
    Thanks
    Regards
    Morgan

    Hi Morgan,
    --- question #1 - Posting of Securities flows.
    Short intro - in case of Securities, only Purchase/ Sale/ Issue/ Redemption flows are treated as transactional and therefore are visible in the tab 'Cash flows'. All the cash flows, relevant to certain Security Class, can be visible by selecting respective icon 'Position cash flows', where you have at least 2 choices: Security account class (only physical payment flows, like placement, nominal interests payments, repayment, etc.) and Valuation Area dependent flows (physical payment flows and also all kind of valuation flows, like interest accrual, FX valuation if relevant, etc.). For posting of so called transactional flows you should use TBB1, while for other flows, like (interest) payments and final repayments, you should use FWSO;
    --- question #2 - is accrual relevant to securities?
    it actually depends what kind of Position management procedure is used for certain Securities Product type. If you need to use interest accrual, you should:
    check if exist/ define relevant Update types: IMG -> ... Treasury and Risk Management -> Transaction Manager -> General Settings -> Organization -> Accounting -> Accrual/Deferral -> Update Types -> Define Update Types and Assign Usages;
    assign accrual relevant Update types per Product category/ product type: IMG -> ... Treasury and Risk Management -> Transaction Manager -> General Settings -> Organization -> Accounting -> Accrual/Deferral -> Update Types -> Assign Update Types for Accrual/Deferral.
    hope this will help you.
    Rgds,
    Renatas

  • Product type 56A/56B - How do we draw down principal amount?

    Hi All
    I created a credit facility using product type 56A & transaction type 200.  I have flow types 1204, 1205,1206 & 1207 associated to the facility. I created a total credit line of 25 million dollars in the profiles tab & created condition types 1204 & 1205 in charges tab.  Now I want to draw down 10 million of the 25 million available to me.  How do I do this?  If I try to pick 'List:Drawings' option in the profiles tab,I do not see any create button there.  SO I am guessing there is another tcode or something to draw down.  Please advise. 
    Thanks
    Regards
    Morgan

    Hi Renatas
    Thanks for the quick response.  I understand now.
    I have another question.  Can I control the product types that could use this credit facility?  I thought about hiding this option in field status for those product types that I do not want to use this with & show the facility field in the product types that I want to use facilities in.  Is this the only option?  The reason I ask is I see a rules tab in the facility & I tried to control it there but it does not seem to work I think.
    Regards
    Morgan

  • How to configure a new product type with a new operation deal?

    hello, All,
    I wonder to know if somebody knows, how to configure a new product type with a new operation deal with the amortization divided?, I mean in the SPRO, portfolio of securities with the characteristics mentioned.
    Hope you help me.
    Bests regards.

    Hi Prasad,
    Thanks for the information, but the directions that you give me not be useful, I want that the UPDATE TYPE  appears in the position cash flow in the transaction deal in the option-->operative valuation area( 2nd option) or in the report TPM13, this for two treasury ledger dates.
    I mean that the update type "samxx" affect the accountant as amortization divided?, this transaction deal is a purchase.
    Thanks in advanced

  • Transfer material type DIEN in ECC system to CRM product type Service

    Hi Experts,
    I have a requirement to transfer material type DIEN in ECC system to CRM product type Service.
    How can we do this?

    Hi Viswanath,
       I dont think its possible to replicate material type DIEN from ECC to CRM Service Product.
       Service Products need to created in CRM, from here transfer to ERP. To transfer service product from CRM to ECC, you need to enable upload for Service Product in SPRO.
           Customer Relationship Management -->
                 Master Data -->
                        Products -->
                            Settings for Product Type -->
                                    Allow Upload for a Product Type.
       Now here select the check box for product type 02(service).
      To send product from CRM to ECC, open the product you need to send it to ECC in COMMPR01.
             Go To -> Transfer to ERP. Here give the ECCRFC Destination and mapping material type.
    //Bhanu

  • Defining New product type in CRM 5.0

    Hi Guys,
    Can anyone tell me how to define new Product Type for CRM(Standalone Products) like material, Service, warranty, financing .
    Thanks in advance
    amar

    Hi Kovela,
    I haven't come across any IMG activity which allows to create a new product type in CRM. Why do you want to have a separate product type. It is not so easy to create a product type because you also need to create additional attributes and set types. In general all existing product types are stored to table COMC_PR_TYPE. Also you need to maintain a separate structure (COMT_PROD_MAT_MAINTAIN_API) for each product type.
    Why don;t you enhance the existing product type by creating new attributes and set types as per your requirement.
    <b>Do not forget to reward if it helps,
    </b>
    Regards,
    Paul Kondaveeti

  • DISALLOW PRODUCT TYPE SERVICES

    We have implemented SRM5.0 Extended Classic Scenario and only want to allow procurement of product type "material".
    How do I remove Product type "services" from the Shopping cart and purchase order create screen in order to only have product type "material" as a selectable option?

    Hi,
      Which screen do you want to change the radio button?While creating the SC,you can modify the Product search screen so as not to display the Services else to change the radio button display you may have to modify the screen templates.
    BR,
    Disha.
    Pls reward points for useful answers.

  • Set type COMM_PR_UNIT is not allowed for product type

    Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
    Set type COMM_PR_UNIT is not allowed for product type
    What can I do? I think that is an ABAP problem
    Thanks in advance
    Rosa Rodríguez

    Rosa,
    This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
    Thanks,
    Jagadish

  • SAP Treasury - Product Type 01 A Investments

    Hi,
    I got following error. How to resolve this?
    Product type 01A not available in company code

    Dear Krishna,
    Setting for production type assignment to company code is missing. Please assign the product to company code in below path.
    Treasury and Risk Management-  Transaction Manager- Securities -Master Data-  Product Types- Define Company Code-Dependent Settings for the Product Type
    This is resolve your issue.
    Regards,
    Jain

  • How is the storage type for a component picked automatically in PO staging

    Hi
    The Process cycle is :
    Sales Order created MRP-Planned Order ---Production Order
    Problem : Transfer Requirement not created for Picking
    Now if I go to Co03--GOTOWM Pick list , For the component the storage type is notr updated automatically
    I compared with Materials for a TR was created & found that Storage type 100 was updated automatically
    Q:How is the storage type for a component picked automatically in PO staging (WM activated )

    Hi Rajesh
    Thanks for your inputs . Actually I forgot to mention that the client is not using Storage type in any of the material master data
    The problem was because the control cycle was not maintained for the combination of material /Plant & Supply Area
    Anyway thanks for your info .Appreciate your cooperation
    Arindam

  • How link LC (Prod Type 56A) with a loan to display as utilization in TM_60

    Hi,
    I have a  Letter of Credit  and I already created a facility (Product Type 56A) by 1 mill usd, then I need to utilized this LC with a loan  Interest rate instrument (55A) transaction type 200 by 300,000 usd.
    Then I executed the transaction TM_60, But the colum Utilization is cero.
    How I could link the Credit line (Product type 56A) with the Interest rate instrument (55A) to see the Utilization in the report in transaction TM_60?
    Could anybody help me please?
    Thanks,
    Adriana

    The steps are:
    1.- In transaction ftr_create I created the Bilateral Facility with product type 56A, in tab Profiles I Created a new credit line.
    2.- In transaction ftr_create I created Interest rate instrument with product type 55A, in tab Administr. in the file Facility I need to select the button created and assignment the number of the transaction of the facility that I created in the step 1.
    3.-I executed the report TM_60
    Thanks,
    Adriana

  • Loans Management - Withholding Tax on Interest - Product type 33A

    Dear Experts,
    I´m trying to config the withholding tax on interest per product type 33A General Loan Given.  Do you know which is the correct flow type to use and how to config and link it  in order to set the base amount related to the interest calculated amount?
    In my design is always a quarterly calculation for Intercompany loans and, in special case, I need to apply the WHT to the calculated amount of the interest.
    Example:
    Interest invoice : Flow Type 0110 A_Interest debit pos. rec.
    01     Customer Affiliate         1000
    50     P&L Interest                 1000
    Interest invoice with 10% WHT
    01     Customer Affiliate           900
    40     WHT 10%                       10
    50     P&L Interest                 1000
    Thanks in advance for any helpful advice you could provide me.
    Best regards
    Paolo

    Hi Feng,
    are you sure it will work also for SAP Banking Loans Management? I read the attached documentation of WHT for India and every call-out is related to TRM.
    May you please confirm me which flow type of loans management is covering this sub-process?
    Thanks and regards
    Paolo

  • Can We sell product type Warranty in the Webshop??

    Hi Gurus,
    Business requirement is to sell Warranty products (product type: Warranty) in web shop. ie Extended warranty product.
    As per my knowledge, webshop supports the sales of product type Material and Services.
    How can we address this??
    Regards,
    Srinivas

    Hi Srini,
    You are right. CRM ISA webshop supports sales and service products in the same product catalog. But you can't combine sales and service products on the same order. In other words you can't create a sales order with service products from webshop.
    Please refer to the below help link for more information :
    http://help.sap.com/saphelp_crm50/helpdata/en/bb/942d14c27e6944a1897f9c68e4fb56/content.htm
    Do not forget to reward the useful answers
    Regards,
    Paul Kondaveeti

Maybe you are looking for

  • How do I convert a DV video file to an AIFF file?

    Can anyone recommend a good tool for converting a raw DV file that I recorded from a DV camcorder into iMovie 11 to an AIFF audio file? I was able to convert to an mp3 file with FLV Crunch but it is does not allow me to go directly to AIFF. I would a

  • Could not find binding output for operation getMessage

    Hi, I am getting a error while involking a service which is implemented using Axis2. The error is "[email protected]1 : Could not find binding output for operation getMessage". Please help me in solving the problem. The WSDL of the service looks like

  • Receiving mail in Outlook Express 5

    I have an IBOOK OS 9.2 from 2001, with Outlook Express 5, which Microsoft no longer supports. Cannot send or receive mail currently. I think mail may be blocked by receipt of an email with 4 photo images. How can this be fixed?

  • XMP output for multiple files

    Is it possible to generate separate xmp files containing metadata from several images without having to open each one manually?  I'd think it could be done using something like a Ps action run via Bridge, but doesn't look like that's possible. Thanks

  • LR3 to LR4:  Windows 7 Title Bar

    Recently upgraded LR3 to LR4 on two machines.  On one computer Lightroom 4 catalog...shows in the Windows title bar.  On the other computer Lightroom 3 catalog-shows in the Windows title bar.  Is there something that I missed when performing the upgr