How to test a generated report in my application by using web test written with Visual Studio 2012 Ultimate

Hello,
My application generates report in different formats, such as: Adobe, Excel, XML, CSV and HTML
I have a webtest that makes all preparations, then generates a report. 
In my application I have an option either to save the new generated report or open it.
When I try to open the new report, the web test doesn't see it and therefore not allows me to test it.
Please refer me to knowledge base or let me know how to resolve this type of issues.
Thanks.
qatm

Hi qatm,
Thank you for posting in MSDN forum.
Since this web performance test is used to verify the Http request/respond work correctly in VS, and the browser session is then displayed as a list of URLs in the Web Performance Test Editor.
However, as you said that you want to test a generated report in my application by using web performance test in VS2012 Ultimate. If the report is not as the Http format, so I think that it is not possible to test a generated report by using web performance
test.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • How do I use Qt and OpenGL with Visual Studio

    Hi! I mainly want to program in C++ and I want to use Qt and OpenGL with Visual Studio.
    I am currently revising C++ and later on i am going to start reading Qt and OpenGL. I have a background of
    Embedded firmware design(C and Assembly).
    The Visual Studio Version I have is 2013 ultimate. How do I use Qt and OpenGL with Visual Studio?
    Thanks
    Alexandros

    Hi ClassicalGuitar,
    The forum supports VS setup and installation. And your issue is not about the forum. I will move the thread to off-topic forum. Thanks for your understanding.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • SQL Reporting Services with Visual Studio 2012

    Hi
    I would like to know if there will be any release to improve on the placeholder feature in SQL reporting services. Currently, I have users who uses HTML editor to input data and tables. However, the table in html format cannot be read.
    I do understand that currently the placeholder feature can only have limited html tag recognised. However, is there any plan to improve it so that <table> tag can also be recognise?
    Or if there is any workaround to show the table format in the reports?
    Sorry but this is urgent as it is used for business application.
    Many thanks

    Hi DotNeTEngineeR,
    According to description, you want to display the content of table tag (<tag>) in a report. Right?
    In Reporting Services, it only has the supported HTML Tags below:
    Hyperlinks: <A HREF>
    Fonts: <FONT>
    Header, style and block elements: <H{n}>, <DIV>, <SPAN>,<P>, <DIV>, <LI>, <HN>
    Text format: <B>, <I>, <U>, <S>
    List handling: <OL>, <UL>, <LI>
    For your requirement, we suggest you use <div> to replace <table> tags in your embedded HTML. Please see the article below:
    Embedded HTML using <div> to replace <table> tags in ssrs 2008
    Reference:
    Importing HTML into a Report (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to compile forms and reports 6i in Application server 1.0.2.2.2.

    Hi all,
    i used oracle forms and reports 6i with oracle database 10g in client server architecture.
    now i want to make 3 tier, client-application server version 1.0.2.2.2-origin database serversystem on 3 separate machines.
    i have installed application server version 1.0.2.2.2.
    now i have my forms and reports 6i in application server computer.
    can any one please tell me how to compile forms and reports 6i in application server computer i.e do i have to write some extra code in forms and reports 6i in order to compile in application server computer successfully.
    waiting for an early reply.
    best regards
    fahad ejaz
    email:[email protected]

    ... another question would be why not upgrade those old Forms & Reports to the newest release 10.1.2.0.2 and use the latest Application Server to run them with?
    Release 6i and 1.0.2.2 is as you know desupported.
    Regards,
    Martin

  • Using Crystal Reports with Visual Studio 2008

    I have bin using visual studio 2008 for a while. I have just started using Crystal Report (which came with Visual studio) . I have an Access database connected with 3 tables, the first two table has two test fields and one index field, the third table has two text fields and two index field (of which one relates too one of the other tables).
    I have generated a crystal report on one of the tables using the wizard. I have then placed the crystalreportviewer in a form (as a test). When I run the resulting form, all I get is the column heading label but no fields being displayed. There is data in the table. All I need to know is how do is make sure that the reports are accessing the data in the table, through the datasets???.

    Hi,
    [Here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/webcontent/uuid/80774579-b086-2b10-db91-ed58c4dda375 [original link is broken]] is the specific samples for you or [here|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9043bbbc-ae66-2b10-ce96-b48f9e25a450]
    And [here|http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm] is the link for the dev library.
    Hope this will work!!
    Amit

  • Crystal Report X1 compatibility with Visual Studio 2008

    We are migrating an application running on .NET 1.0 to .NET 3.5. Previously Crystal report X1 was working fine with .NET 1.0 however now when it has been migrated to .NET 3.5, we are able to generate crystal report but print and export functionality is not working.
    Please confirm if Crystal report X1 is compatible with Visual studio 2008/.NET 3.5? We even updated Release 2 SP4 patch but that didn't solve the problem.
    If crystal report X1 is not compatible with Visual studio 2008, which version is compatible so that we can buy the license for the same?

    Hello Anurag,
    CR XI R1 is not supported for VS 2008.
    but for
    u2022 Visual Studio .NET 2002
    u2022 Visual Studio .NET 2003
    CR XI R2
    u2022 Visual Studio .NET 2002
    u2022 Visual Studio .NET 2003
    u2022 Visual Studio .NET 2005
    CR XI R3
    u2022 Visual Studio 2003
    u2022 Visual Studio 2005
    CR XI R3 Service Pack 1
    Microsoft .NET Framework
    u2022 .NET 1.1
    u2022 .NET 2.0
    u2022 .NET 3.0
    u2022 .NET 3.5
    Development Platforms
    u2022  Visual Studio 2003
    u2022  Visual Studio 2005
    u2022  Visual Studio 2008
    Hope this helps
    Falk

  • How to add new project developed in visual studio 2012 on tfs 2010

    Hi Friends,
    our development developed new project in visual studio 2012 .
    and we need to add it on tfs 2010 version .
    we added it on existing collection on tfs 2010.
    but itn't works properly .
     i want to know is it possible to add visual studio 2012 developed projects in tfs server 2010
    mastanvali shaik

    Thanks for Adrian's help.
    Hi Balaji,
    Based on your issue, I agree with Adrian's suggestion. Therefore, I suggest you can try Adrian's suggestion to refer the link of Cybermaxs' reply check your issue.
    In addition, I suggest you can use fiddler to check the header definition.
    For more information, I suggest you can refer the Shiv_P's reply in the following link.
    Reference:
    https://social.msdn.microsoft.com/Forums/en-US/9bb37eec-3467-4fcb-8537-648d04e91e2f/how-to-add-latest-chrome-browser-plugin-in-visual-studio-2010-ultimate-for-performance-testing?forum=vstest
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to debug ABAP Web services from Microsoft Visual Studio

    When developing .NET based Web services clients using Visual Studio that call Web services in SAP NetWeaver .NET developers would like to be able to debug inside SAP. In my blog <a href="/people/andre.fischer/blog/2007/02/07/how-to-debug-abap-web-services-from-microsoft-visual-studio to debug ABAP Web services from Microsoft Visual Studio</a> I would like to point .NET developers to the fact that SAP NetWeaver offers the option of external debugging to perform this task. Though the steps that have to be performed are described in the SAP Online Help I am sure that this option is not well known amongst the .NET developer community.

    Hello WilliamIV,
    >>How can I "configure" Visual Studio debugger to allow validation to work?
    Since I do not have a VS2012 environment, according to your provided link, I created a test demo with VS2013, however, both ways catch the validation error:
    If possible, you could have a try with VS2013 to see if it works or run the example on other machine with VS2012 to see if this is caused by the VS environment, in my side, I do not change any configuration, all are default.
    If I misunderstood this issue, please feel free to let me know.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Cannot preview SSRS report in Visual Studio 2012 - assembly does not allow partially trusted callers

    Hi,
    I have an SSRS report that works fine in Visual Studio 2008 BIDS.  This report references a .Net assembly namely:
    System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
    I use this assembly in some simple Code functions in the report. e.g.
    System.Web.HttpUtility.UrlEncode(inURL).ToString
    I have converted the SSRS project to 2012 and am trying to preview the report.  However, I get an error relating to: "That assembly does not allow partially trusted callers".  If i deploy the rdl to my local SSRS it renders fine, but
    how do I fix Visual Studio to preview the report without error? This is highly annoying.
    My Visual Studio version is:
    Microsoft Visual Studio Professional 2012
    Version 11.0.61030.00 Update 4
    Microsoft .NET Framework
    Version 4.5.51641
    SQL Server Reporting Services  
    Microsoft SQL Server Reporting Services Designers
    Version 11.0.3402.0
    Any help is appreciated on this one.
    Regards,
    MrHH

    Hi MrHappyHead,
    According to your description, you used custom assembly in the report, when you run the report in Visual Studio 2008, the report works fine. When you run the report in Visual Studio 2012, the error message occurred: "That assembly does not allow partially
    trusted callers".  But the report works fine after you deployed it to report manager.
    Only applications that are fully trusted by the runtime code access security system are allowed to access a shared managed code assembly that is not explicitly marked with the System.Security.AllowPartiallyTrustedCallers attribute. A partially trusted assembly
    (one that is registered in SQL Server with the SAFE or EXTERNAL_ACCESS permission set) that attempts to access a strong-name signed assembly without this attribute causes a System.Security.SecurityException to be thrown. To troubleshoot the problem, please
    refer to the following steps:
    Add namespace system.security to AssemblyInfo.cs file
    Add [assembly:allowpartiallytrustedcaller] to the file.
    Set trust level to "Full" in web.config file
    For more information, please refer to the following document:
    http://support.microsoft.com/kb/2869522/en-us
    If you have any more questions, please feel free to ask.
    Thanks,
    Wendy Fu

  • Crystal Report Dll problem with Visual Studio 2005

    I am using Crystal Reports with Visual Studio 2005. At one time there were two different version of Crystal Decision Dll in Global Assembly Cache (GAC). So I uninstalled both the versions and then only installed 10.2.3600.
    I am facing the following error when building my application in visual studio.
    The type 'CrystalDecisions.CrystalReports.Engine.ReportDocument' exists in both 'c:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\arms website\301a5b02\e03ad7d9\assembly\dl3\c30f5560\00f92427_3857ca01\CrystalDecisions.CrystalReports.Engine.DLL'
    and
    'c:\WINDOWS\assembly\GAC_MSIL\CrystalDecisions.CrystalReports.Engine\10.2.3600.0__692fbea5521e1304\CrystalDecisions.CrystalReports.Engine.dll'
    I have only installed it in .Net Framework. For some reason it appears in the temp folder. I cannot delete it and when I renamed it after the next compile it came back again.
    I would appreciate any help.

    Thanks for the tip.
    I installed CR XI R2 with SP2 and 2.1
    There are few reports in the system they use to run fine but now when I try to run them I get the following error:
    Failed to open the connection. Details: [Database Vendor Code: 4060 ] Failed to open the connection. C:\DOCUME1\SSheikh\LOCALS1\Temp\ZGA370 {71BFCD35-F652-48C8-896D-B93229A4D2C2}.rpt Details: [Database Vendor Code: 4060 ]
    I understand that these reports run ok independently and on production machine as well; however when I try to run them from my development machine I get the above error.
    I would appreciate help to resolve this. The code of the report is with report developer and I need to know what settings do I need to change where to be able to run the reports. Also I use my machine for deployment of application on the production server.
    Thanks.

  • Integrating Crystal Report 2008 Developer with Visual Studio 2008 Standard

    I have Crystal Reports 2008 Developer version 12.0.0.683 on my computer. I also have Visual Studio 2008 Standard. I know the standard edition of VS 2008 does not have the bundled crystal reports, but since I bought the full version of CR 2008 separately, I figure I should be able to use CR within VS 2008. The problem I am facing is integrating Crystal Reports with Visual Studio, so I can create reports from within visual studio.
    Crystal Reports was installed first and then Visual Studio. As per suggestions on this and other forums, I repaired my installation of Crystal Reports, but that did not help. I then ran Visual Studio integration manager, but when I run it, it only detects Visual Studio as the currently installed IDE, but does not detect CR 2008. I downloaded service pack 2 for CR, but have not installed it yet. I do not want to install it if it is not going to help. I would also like to avoid uninstalling my copy of CR if at all possible.
    I am a newbie at development in visual studio. Any help will be highly appreciated.
    Thanks,
    Rajib

    Don't want to go against what Jason said as it may be correct - if we go strictly by the documentation provided (sorry Jason, Dan says...). However, here is something to try;
    Uninstall CR. Look for any left overs; c:\program files\business objects\... and delete all of that.
    Look in the registry for HKLM\software\business objects and remove the business objects entry.
    Download CR 2008 from here:
    http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
    That is a trial version and I believe it is already at SP 1. Use your keycode to install. Once this is done, you should have the ability to use CR in .NET. I'd recommend you do apply sp 2 now also.
    Ludek
    Follow us on Twitter
    http://twitter.com/SAPCRNetSup

  • How to get web application to use Tuscany without conflicting with SAP SDO

    Hi,
    We are attempting to run a web application on SAP NetWeaver CE 7.1 SP1 which uses Tuscany SDO.  As it now stands We must use Tuscany because the web application will not run with the SAP SDO implementation provided by Netweaver. To ensure that Tuscany is loaded with priority, we have packaged the Tuscany JAR files and their dependencies as a heavy resource, as described here:
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60642a88-95fe-2b10-d387-a245d48fc257?overridelayout=true
    The final check showed that Tuscany was correctly deployed as a heavy resource and included the following JAR files:
    common-2.2.3.jar
    ecore-2.2.3.jar
    ecore-change-2.2.3.jar
    ecore-xmi-2.2.3.jar
    tuscany-sdo-impl-1.1.1.jar
    tuscany-sdo-lib-1.1.1.jar
    tuscany-sdo-tools-1.1.1.jar
    xsd-2.2.3.jar
    We also verified that the web application using Tuscany has a hard reference to the Tuscany heavy resource.
    However, when we try to run the web application, the following error is logged:  java.lang.LinkageError: Class commonj/sdo/DataGraph violates loader constraints
    The issue is definitely due to some kind of classloading conflict with the SAP SDO library, as the application runs normally when SAP SDO is manually removed from the classpath. Doing this on a production system is unfortunately not an option, though.
    So the question is: how to get web application to use Tuscany without conflicting with SAP SDO?

    I took a look at the "printerReady" example.  Looks like I may be able to use the InetPing (...) function to ping through a range of IP addresses looking for a response.
    Any ideas on how to find the MAC address associated with the IP addresses that respond?
    We may have multiple units responding and the MAC address will allow the operator to determing which unit to connect to.
    I'll try the InetPing to see how it works,
    Kirk

  • How do I use infopath 2013 with visual studio 2013 to modify forms with code?

    Dear all,
    I am using sharepoint online and infopath 2013, I wonder how do I edit infopath 2013 forms with visual studio? When I try to edit form code it says  I need visual studio 2012 and some other tools, I installed them and visual studio 2013, I wonder how
    do I get rid of the message and start coding? Can someone provide a detailed procedure of doing so? I am having trouble with creating multiple items with single infopath form with repeating table on sharepoint online. Thanks.
    Timothy

    Hi,
    According to your post, my understanding is that you want to create InfoPath form with code using Visual Studio.
    More information about develop InfoPath form with Visual Studio:
    http://msdn.microsoft.com/en-us/library/office/ee526362(v=office.15).aspx
    http://msdn.microsoft.com/en-us/library/office/aa942693.aspx  
    For the second question, I suggest you can create another post , it will be easier for others to focus on one question in one thread.
    Best regards

  • How can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

    how can i view multiple windows in safari? I used to do it with the 3 finger sliding, but that feature is gine now. please help

    Try a 2 finger Pinch to see the tabs.

  • How do I load an SSIS package created in Visual Studio 2012 Shell (Integrated) onto SQL Server 2012 using SQL Management Studio 2012

    I am fairly new to this whole process of working with the Microsoft development environment.  Here is what I have to work with:
    an NT server running Microsoft SQL 2012  - Microsoft SQL Server Standard (64-bit)  11.0.2100.60
    and on my laptop (all freebie downloads):
    SQL Server Management Studio 2012            ver 11.0.2100.60
    Visual Studio 2012 Express  for Desktop Development and
    Visual Studio 2012 Shell (Integrated)
    I was able to create an SSIS package in
    2012 Shell (Integrated).  It takes a flat file and imports it into an SQL database table.  It runs successfully from within the
    2012 Shell (Integrated) envrionment.
    But I am having trouble figuring out how to set this up on the 2012 SQL Server.  I see that one of my colleagues created an Integration Services Catalog,
    and using SQL Management Studio I was able to create a folder under that called DigLic.  But when I go to the Projects subfolder of DigLic and attempt to import my SSIS package, I get an error message:
    "To launch the Integration Services Deployment wizard, one of the components: Integration Services, Management Tools - Basic or Business Intelligence Development Studio has to be installed by the SQL Server
    2012 Standard, Enterprise, Developer, or Evaluation Edition.  To install a component, run SQL Server Setup and Select the component name"
    I realize that Express Versions of Visual Studio lack the full feature set of a professional version.  But am I wrong in assuming that owning a server version of SQL Server 2012 gives us license to a professional
    version of SQL Management Studio 2012?  If so, how would I go about getting this software component installed?  And I am not clear if this is something that needs to be installed on our SQL Server or if I simply need a professional version of SSMS
    loaded on my laptop.
    I work for a company that is fairly fractured in its repsonsibilities, so I would need to know exactly what to ask for if I need to track down any licenses that I might need and if I need to have any specific software installed on our SQL server or on my
    laptop.
    All helpt would be greatly appreciated.
    Thanks!

    Arthur,
    Thank you for your reply.  But at this point, one of my points of confusion is what software I have available to me.  I wish I had a useful central help desk to call up and just say, "Hey, load me up with all of the professional version(s) of Visual
    Studio.  But I do not know what we have license to.  And I kind of need to know what the options are, so that I can ask a specific question of our vast buracracy.
    For now, I have downloaded only free versions of Visual Studio client software.  Since my company does have servers running Microsoft SQL Server, I am going to assume that we have proper licensing for those servers.  But does that server license
    allow me to get any professional versions of the PC client software for the various Visual Studio(s) 2012?
    And if I get a professional version of Visual Studio 2012, does that do away with the three different flavors that I have right now?  I have 2012 versions of SQL Server Management Studio, Visual Studio Express, and Visual Studio Shell (Integrated).
    Your feedback is much appreciated.
    Thanks!

Maybe you are looking for