How to test exit EXIT_SAPLEINM_018

Hi Experts ,
I have made some changes for documentation.EXIT_SAPLEINM_018 which is related to any purchasing document
but i don't know how to test it.
can any one pls help me how to test it ?
answer will be rewarded
regards

Put session break-point in the enhancement, Run the transaction to test the functionality.
Regards
Vinod

Similar Messages

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Is it possible to go back in time with Time Machine and reinstall Snow Leopard. Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

How to Test Mail's Trainable Filter?

In the Apple Support Discussions topic No Junk mailbox in Training mode? a question arose regarding how to test if the trainable filter (the filter that evaluates the "Message is Junk Mail" condition) is evaluated independently of the other conditional tests of the Junk Filter rule -- IOW, if some other test condition in the Junk Filter rule, like sender is not in the address book, evaluates to false, does the "Message is Junk Mail" test which follows it in the rule's list of conditions ever get evaluated?
A proposed test for this involved resending to yourself a message that Mail had previously marked as junk using the "Message > Send Again" function of Mail. It has been pointed out to me that this probably isn't a valid test because "Message > Send Again" doesn't send the original message in unaltered form (there are substantial changes in the header info regarding sender, path, etc.) & thus the filter may not consider the resent message as junk, even if it were to evaluate it.
So, for testing purposes, does anybody have a suggestion about how to resend (or fake resending) a received message to myself without altering its header info?

What matters is whether the Message is Junk
Mail condition would still evaluate to true
regardless.
That depends on what you are trying to determine & if the test produces decisive results.
For instance, consider tests with the standard Junk Filter automatic settings & no other rule involving "Message is Junk Mail" in the list. A test is performed in an attempt to determine if the filter's conditional tests are performed in the indicated order only until one evaluates to false.
"Send Again" should not cause the "Message is Junk Mail" test to be evaluated at all, since in this case the sender is oneself & the Junk Filter should exit as soon as the 'sender not in Address Book' test is evaluated.
Yet, when I try this with a message (correctly) marked as junk when originally received, the resent version is still marked as junk, & this happens not just on my on Mac but on the few others I have checked as well. I have tested with only a limited number of junk messages because on the other Macs the owners do not keep them for long & on my own I do not get that many (AOL is my primary account & has excellent spam filtering), so I would love to know if readers of this topic see similar results.
BTW, I should mention here what might be a potential hazard of using "Redirect" for testing with "real" spam: As I hope everybody knows by now, it is a bad idea to enable automatic loading of remote html images because doing so can alert spammers one's email address is valid. In one case, when I tried the "Redirect" method on my own Mac, AOL refused to accept the redirected message, possibly because of AOL's spam filters. At that point, Mail displayed the message, asking if I wanted to try sending it from another account, edit it, or what. Even though I have the option disabled, Mail loaded the original's remote html images along with its other content. I don't know if that is a design feature of Mail, a problem with just my Mac, particular to AOL, or what, but I want readers to be aware of it, just in case.
Anyway, for this reason I have since confined myself to testing with "Send Again," which seems safe in all cases, & mostly to testing only on my on Mac, just in case it is not.
Back to the "so what" aspects of this topic: It may be that the "Message is Junk Mail" test is sometimes treated differently from the other conditional tests in the Junk Filter in that it may be evaluated first or even if other tests before it evaluate to false. This makes some sense as a design feature in that even if the Junk Filter's automatic mode action isn't performed, it gives users more training opportunities. It may be a bug. It may just be something particular to my Mac. It may be something else, perhaps having to do with trusting junk headers, or something more subtle as yet unconsidered.
In any event, the point is holding all variables save one constant in any single "black box" test of a multi-variable system is a necessity for definitive results because variables may be interdependent. Because of this, the ability to resend to oneself the same message in unaltered form would be useful for a variety of tests, so I would still like to know if anyone has any ideas about how to do this.
iMac G5/2.0 GHz 17" ALS (Rev B) Mac OS X (10.4.7) 512 MB RAM, Kensington Trackball

How to test enhancement

hai,
i have written in the coding under the ehancement CATS0003
DATA :
w_fields     LIKE cats_comm,
w_sap_tcats LIKE tcats,
w_i_messages LIKE cats_mesg.
w_fields     = fields    .
w_sap_tcats = sap_tcats .
if fields-raufnr = '4000020'.
w_i_messages-msgid = 'Z001'.
w_i_messages-msgty = 'E'.
w_i_messages-msgv1 = 'can not use this network and acivity'.
APPEND w_i_messages TO i_messages.
ENDIF.
show me the procedure of how to test this coding in the transaction CAT2

Hi Anitha,
1. I assume the enhancement u have used
   is correct one for the program in question.
2. U want to say that the main program
   is not an online report.
3. No problem.
   U must be executing it thru some TCODE.
4. Run that tcode.
   when some screen appears,
   type
   /h
   and press enter
   in the command text box(same where u type tcode)
5. This will put the program
   in DEBUGGING mode.
6. Now as u have already put a break-point,
   the program will come there afterwards
   whenever the user-exit gets triggered.
I hope it helps.
Regards,
Amit M.

How to test RAM and HDD (Hard Drive).

Introduction
HP machines have built-in Bios testers for RAM and HDD's.
To use them you need to enter Bios by pressing F10 on startup. They are placed under ' Diagnostics menu '.
Why I wrote this guide and complicate whole situation?
There are three reasons:
This testers are not so great and sometimes they do not detect problems which you may have with your hardware. It's recommended to use more advanced tester for RAM and manufacter diagnostic programs to test HDD's.
Not always you will be able to enter Bios. Sometimes corrupted hardware is blocking possibility to run it.
Advanced diagnostic softwares for hard drives allow to fix some problems.
Table of Contents:
A How to test RAM with Memtest86+.
B How to test HDD (Hard Drive).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Ad. A
There are few possibilities to run this program. In this guide I will present how to run it from:
CD
       and
USB Flash Drive.
First we need to burn Memtest86+ on a CD or prepare properly USB Flash drive with a special tool.
Here you will find Memtest86+ home page from which you will be able to download correct version of this software.
Solution 1. CD:
        Download ' Pre-Compiled Bootable ISO (.zip) ' and extract it with 7-Zip(free) or WinRar.
        Download CDBurnerXP from here. Install this program and run it.
        Choose ' Browse ISO image '.
        and point Memtest86+ iso file.
        Click ' Burn disc '.
        Wait until burning process will finish.
        Choose ' OK '.
        Exit from program.
Solution 2. USB Flash Drive:
         Download ' Auto-installer for USB Key (Win 9x/2k/xp/7) ' and extract it with 7-Zip(free) or WinRar.
         Connect USB Flash Drive to one of USB ports. Run ' Memtest86+ 4.10 USB Installer '.
         Click ' I Agree '.
         Select USB Flash Drive and check box to format it.
     Caution!
          Format process will erase all information from USB Flash Drive. If you have there something important then please backup this data first.
           Choose ' Create '.
           Wait until process will finish and click ' Next '.
           Exit from program by choosing ' Finish '.
How to run Memtest86+.
Leave USB Flash drive in USB port or CD in CD/DVD drive. Restart your system and on startup press F9 key repetitively:
After this step you will be able to select from which device you want to boot. Choose from the list ' USB Hard Drive ' if you have prepared USB Flash Drive (like on below photo) or ' Optical Disk Drive ' if you have prepared CD:
How to use Memtest86+ to test RAM?
Do at least 2 - 3 passes. In Errors column may show up only 0. If it's other number then you need to replace corrupted RAM stick.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

How do you exit an application :) very simple question

Hi Everyone
how do you exit an application.
For example let's say I had something like this
public class MyClass implements Runnable{
public static void main(String[] ar){
MyClass mc = new MyClass();
Thread t = new Thread(mc);
t.start();
public MyClass(){
get a file
but if the file is not found Exit the application
public void run(){
while(true){
// do something interesting that depends on the properties of that file
now I can make the try catch(FileNotFoundException e ) block in constructor . I can return from the constructor BUT public static main(String[] arg) will continue to execute and start the new thread .
So the application will enter the run() method and throw some errors.
I know i could simply set a variable in the catch block and test it to determine if the various methods will return but that doesn't seem reasonable --- anyone have a suggestion -- especially if I have lot's of classes and threads working at the same time
thanks
stev
In the catch block
}

thank you. both of those answers sound great.
it seems that I should actually understand the correct use of the constructor.
Perhaps the constructor should just be used to set variable names -- and not to perform so many actions like loading property files .
it seems like loading property files can better organized and implemented as a separate method which is called by the run method.
When the exception is thrown then i think i can more gracefully exit the application in the run method. And this solution can be used for classes that extend Thread and classes that call start() from the outside of the class
stev

Using iPad mail program I have a draft of an email. I attempted to "cancel" and "delete draft" but it is still on my screen even after shutting down and restarting. How do I exit so that I can use other mail functions?

Using iPad mail program I have a draft of an email. I have attempted to "cancel" this and "delete draft" but the email stays on my screen. How can I exit this so that I can use other email functions?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

HT3597 How do you exit voice control on iPhone 4, with iOS7.1.1?

How do you exit voice control on iPhone 4, with iOS7.1.1?

capsjenwalker wrote:
How do I disable Voice Control all together on a 4?
Sorry, you can't. There is no setting to completely disable such.

How to test a simple PL SQL function from another PL SQL script

Hi,
I have created a function. Now i need to test that whether it is returning the correct values or not.
For that, i have written anothe pl sql script and trying to call this function. Im passing all the IN parameters in that function. I assume here that OUT parameters will provide me the result. Im trying to display the OUT parameter one by one to see my result.
I'm using toad as sql client here connected with oracle.
pl sql script:-
DECLARE
BEGIN
     DBMS_OUTPUT.PUT_LINE('$$$$$$$ VINOD KUMAR NAIR $$$$$$$');
     FETCH_ORDER_PRODUCT_DATA(320171302, 1006, 6999,
ODNumber OUT VARCHAR2, Line_Number OUT VARCHAR2,
ServiceID OUT VARCHAR2, BilltoNumber OUT VARCHAR2,
AnnualPrice OUT NUMBER, CoverageCode OUT VARCHAR2)
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ODNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | Line_Number );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ServiceID );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | BilltoNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | AnnualPrice );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | CoverageCode );
END;
Function:-
Program Name : SPOT_Order_Product_Data_For_CFS.sql
Description : Function to Validate parameters from CFS
By : Vinod Kumar
Date : 08/19/2011
Modification History
By When TAR Description
CREATE OR REPLACE FUNCTION FETCH_ORDER_PRODUCT_DATA(orderNumber IN VARCHAR2, customerNumber IN VARCHAR2,
productLine IN VARCHAR2, ODNumber OUT VARCHAR2,
Line_Number OUT VARCHAR2, ServiceID OUT VARCHAR2,
BilltoNumber OUT VARCHAR2, AnnualPrice OUT NUMBER,
CoverageCode OUT VARCHAR2)
RETURN VARCHAR2 IS
lv_err_msg VARCHAR2(100) := '';
lv_bucket_id VARCHAR2(14);
lv_bill_number VARCHAR2(30);
lv_anual_price NUMBER;
lv_coverage_code VARCHAR2(8);
lv_quote_num NUMBER(10) := NULL;
lv_line_num NUMBER(5) := 0;
lv_customer_number VARCHAR2(30) := customerNumber;
lv_product_id VARCHAR2(14) := productLine;
lv_count_quote NUMBER := 0;
lv_quote_status VARCHAR2(5);
lv_quote_version NUMBER(2):=0;
BEGIN
IF INSTR(orderNumber, '-') = 0 THEN
lv_quote_num := orderNumber;
ELSE
lv_quote_num := SPT_Delimiter(orderNumber, 1, '-');
lv_line_num := SPT_Delimiter(orderNumber, 2, '-');
END IF;
--Check status of the quote COM, APP
SELECT COUNT(*) INTO lv_count_quote FROM sot_order_header WHERE ORDER_NUMBER=lv_quote_num
AND ORDER_STATUS IN ('APP', 'COM') AND CUSTOMER_NUMBER = lv_customer_number;
IF lv_count_quote = 0 THEN
lv_err_msg := 'Invalid Order number';
RETURN lv_err_msg;
END IF;
-- Fetch the latest version on SPOT quote
SELECT MAX(VERSION_NUMBER) INTO lv_quote_version FROM SPT_QUOTE_HEADER WHERE QUOTE_NUMBER = lv_quote_num
AND CUSTOMER_NUMBER = lv_customer_number;
-- If quote is valid fetch the data in OUT parameters
IF lv_line_num = 0 THEN
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.LINE_NUMBER, b.BUCKET_ID,
b.ANNUAL_REF_RATE_USD, b.COVERAGE_CODE
INTO lv_bill_number,lv_line_num,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple PIDs existing in the SPOT order, please provide the SPOT order + line number as input data';
RETURN lv_err_msg;
END;
ELSE
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.BUCKET_ID, b.ANNUAL_REF_RATE_USD,
b.COVERAGE_CODE
INTO lv_bill_number,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id
AND b.LINE_NUMBER = lv_line_num;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
          lv_err_msg := 'Multiple SPOT lines exist with same parameter';
          RETURN lv_err_msg;
END;
END IF;
EXCEPTION
WHEN OTHERS THEN
lv_err_msg := '@@@ EXCEPTION THROWN @@@ '|| SUBSTR(SQLERRM,1,120);
RETURN lv_err_msg ;
END;
Don't look at the function, it might have errors but my primary concern is how to test this function. Once I start doing its testing then only i can understand any bugs(if any).
My pl sql is not so good. Im still learning. I don't understand IN and OUT parameters are.
I just know that IN parameters r those whick we pass in to the function wen we call it and OUT parameters are those through which we get the result.
Thanks in advance
Vinod Kumar Nair

20100511 wrote:
I wondered how I could test the output of the function from within TOAD?I usually create the following function in my developer schema:
create or replace function BoolToChar( b boolean ) return varchar2 is
begin
if b then
    return( 'TRUE' );
else
    return( 'FALSE' );
end if;
end;To test a function like yours, the following will do in SQL*Plus/TOAD/etc:
begin
DBMS_OUTPUT.put_line(
    BoolToChar( XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) )
end;
I'm probably doing 101 things wrong here, but thought I'd ask anyway and risk being shouted at.Shout at? You reckon? I thought people risked being beaten with a lead pipe, or pelted with beer cans and stale pretzels - which makes being shouted at a really safe and viable alternative. {noformat};-){noformat}

How can I exit from full-screen View?

On the View menu, I clicked "Full screen View", but then I couldn't find any way back to normal view. I had to Force-Quit Firefox to escape.
How do you exit from Full Screen View?
(I tried Esc, Ctrl-C, and many other key combinations)
Thanks, PeterR

Try F11.

How to test the migrated workflows in SharePoint 2013

Hi, we are migrated the portal from SharePoint (Moss) 2007 to SharePoint 2013 using Doc Ave tool.
Now my concern is how to test all (OOTB and SharePoint Designer) workflows are working properly in SharePoint 2013.
How to approach? Any ideas/help will be appreciated.

Hi Ashok,
Have the business users that use them or the folks that created them test them in the DEV environment prior to the PRD migration...
-Ivan

How to test domain controller on upgraded Win Server 2008 R2

The windows team recently upgraded the development environment for the domain controller from 2003 to Windows 2008 R2 and I am to test the Idm functionality on this upgraded version. Our current configuration is that the DC and Idm gateway runs on different machines. To test this new DC, i want to install the idm gateway on that server and run some onboarding and termination test cases just to make sure if the AD connection is working on the upgraded DC. But i am getting ’Input/output error’ when i try to install the service and from the documentation it says 'The most common cause of this is that you do not have rights to work with this service.'. The server admin tried installing the gateway with his id as well and it failed. He tested installing in on the 2003 version of DC and it worked, so its not a matter of permission (i think..)...
Does anyone have any better idea on how to test an upgrade of a DC from version 2003 to 2008 R2? Any help in this matter is appreciated. We are running Idm 8.1 on a Windows platform and an upgrade to OW 8.1.1. Patch 2 is also in the works..
Thanks in advance.

I may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it.

How to test the payload in XI

Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
Radhika

Hi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan

How to test the rule if multiline container is passing to the task?

Hi Experts,
                  I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.

Hi Pavan,
                 Thank you.
                 To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija

How to test a plug_in without Adobe Reader Integration Key?

I havge a project to create a plug_in for acrobat reader with Adobe Acrobat 8.1 SDK. I also apply for the Adobe Reader Integration Key, but I have not it by now. But deadline of the project is coming, is there any one who can tell me how to test the plug_in without Adobe Reader Integration Key?
I also have another question, does the plug_in I make with Adobe Acrobat 8.1 SDK can be compatible for all the version of Acrobat reader, such as 7.0, 8.0 and so on? Thank you.

You test the plug-in, as well you can, using Acrobat. You also build
it using the preprocessor options to build a Reader plug-in, so you
don't accidentally use an API not in Reader.
If you are saying, is there w way around the Integration key for
testing in Reader, the answer is no.
Different Reader keys and tools are needed for each version of Reader.
You will probably not get a key for an old version of Reader.
Aandi Inston

How to test exit EXIT_SAPLEINM_018

Similar Messages

Maybe you are looking for