How to test if remote R/3 system (Receiver) is down in case of Async RFC ?

Hi Experts,
   How to test if remote R/3 system (Receiver) is down in case of Async RFC call? There is no BPM as well. I have configured an alert category and created a rule in runtime workbench's Alert Configuration for the specific inbound interface.
   I have tried by stopping the channel and also by changing the server name in the communication channel but all in vail. XI still shows message successfully processed.
  Kindly help me
Thanks
Gopal

Hi,
How to test system down in XI? Kindly help!
Have answered here as well.
Meanwhile, you would have an error in the receiver RFC adapter in Comm Channel Monitoring.
Maybe you change another RFC adapter rather than the one being used in the receiver agreement.
regards
Bhavesh

Similar Messages

  • How to test flash remoting?

    I am using cf 7.0.2.I want to use coldfusion remoting.
    Please let me know if I need install other software and how
    to make it work.
    I also need to know how to test the function.Thanks
    Mark

    mark416 wrote:
    > I am using cf 7.0.2.I want to use coldfusion remoting.
    >
    > Please let me know if I need install other software and
    how to make it work.
    >
    > I also need to know how to test the function.Thanks
    >
    > Mark
    flash remoting is built-in in CF7, and unless you need to
    enable
    integration of webs services, you do not need to change
    anything
    to test if fr is enabled, just go to
    http://localhost/flashservices/gateway
    - if you see a blank page in
    response you are good to go
    you will obviously need MM/Adobe Flash to make flash movies
    that
    get/post data with remoting... keep in mind, though, that
    flash
    remoting components were included with Flash only up to ver 8
    (Flash CS3
    does not have them at all, since it uses a different approach
    altogether; though you can still make it work with components
    for
    previous flash versions, it is a bit of a PIA...)
    i am sure others will add a lot to this (i am just a casual
    flash
    remoting coder/user - it is not my sharpest knife...)
    a few websites that helped me get going were:
    http://www.asfusion.com/blog/entry/remoting-for-coldfusion-flash-forms
    (and a lot of other pages in that blog + read comments too!)
    http://articles.techrepublic.com.com/5100-22-1050210.html#
    http://blog.vixiom.com/2007/04/17/actionscript-20-flash-remoting-with-flash-cs3/
    http://www.builderau.com.au/program/web/soa/Consuming-Web-services-in-Flash-MX/0,339024632 ,320282917,00.htm
    hth
    Azadi Saryev
    Sabai-dee.com
    http://www.sabai-dee.com

  • How do I make a re-installable system clone? Just in case!

    Hi everyone,
    So, I've got my copy of Leopard and am anxious to upgrade my trusty PowerBook, however, after reading some of the issues posted here I am also somewhat apprehensive.
    I would like to make a clone of my current system, which is running sweetly on 10.4.10 with a lot of other 3rd party apps that I fear may not be compatible with Leopard. This is the main reason I want to clone the system.
    I have a brand new 80GB Firewire drive ready for the event, but as I have never done this before I would greatly appreciate any and all advice on this topic please.
    What is the best software to use? I've heard of SilverKeeper and there is DeJaVu with Toast8. Are there anymore I should consider?
    Will I be able to use the clone as re-installable disc image to return my system to it's previous state? Would that work through the disc utility's 'restore' function or another process?
    Would I be better off to install Leopard onto the external F/W drive and run some software tests first?
    Reading all these problems has put me into a minor panic. I was so excited to buy Leopard, but now I am fearful of installing it.
    I'm looking forward to your responses.
    Thanks in advance.
    SR.

    Nope. I made a copy via Carbon Copy Cloner. I have it on my Firewire drive but have no way to get it back onto the boot drive. You can't copy over a running OS and I can't boot from the firewire drive for some reason (Kernal Panic). I don't get it. It is like the chicken or the egg. I am stuck. I do not want eopard anymore and can't get my cloned 10.4.10 back to my G5. It appears I need an image file. When I go that route, it allows me to clone the items on a drive, back to the same drive, but says "by clicking ok, you will delete the files on the drive and then create an image file on that drive". Sorry, but that makes NO SENSE.

  • How to test the volume on your iPhone receiver

    Summary: Using the iPod with speaker, you can far exceed the normal volume limits heard on iPhone receiver during phone calls.
    If you suspect that the receiver is faulty, this is one way to know if you can crank it up (even if your phone calls are still soft). Although this doesn't fix the problem... at least you know the receiver "works"
    Test it yourself:
    (1) Open iPod and start song (with sound on speaker)
    (2) Cover the speaker on lower left hand corner with finger
    (3) Put phone up to ear and increase volume using side volume controls. You'll notice how LOUD it gets in the receiver (much louder than an iPhone phone call gets)

    You sync them via iTunes.
    You canot copy them to the iPhone using Home Sharing.

  • How to test Windows 2012 R2 DHCP Failover without shutting down the service?

    How can I test the Win2012R2 DHCP Failover?
    There is a command or script, that i could use to test if DHCP failover is working properly?
    How to monitor the sync of the objects?
    How to make sure that it will do the job, if required?
    Or i have to really stop DHCP server main server and see the failover?

    Hello,
    you have to keep in mind that this has ONLY effect for machines that request during the downtime a lease. So if your lease time is for example 8 hours a computer will ask after 4 hours for the renewal of the lease.
    Means there is no problem for running machines during the test. You just need a computer to start after the service is shutdown on the first DHCP server, should take only some minutes to check if the fail over works. Then you could already start the service
    again if you see the lease on the new server.
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • How do i share files with a remote mac running system 10.4

    I am trying to receive pictures on my iMac 27" from a remote Mac running system 10.4. How do we do this?

    Then BDAqua's answers are what you're looking for.
    There are other services, too - Sendspace for one, and an internet search should provide more.

  • How to run a remote windows dll files and the drivers of the system using j

    Dear Friends,
    I need some valuable info regd how to run a remote windows dll files and the drivers of the system using java
    reply regd thanking you

    Please don't make duplicate posts like this.

  • How to Test, Inbound idoc ,with out the Sender System, using a Text File

    Hi Guru's .
    we wanted to test BLAORD03 inbound idoc (Message Type BLAORD).with out the SENDER SYSTEM.
    on the same client.
    we wanted to test this idoc with text file from our local machine.
    Can anyone give us detail steps.like how to create  File layout
    with Segment name,and values for the fields.how to pass this file to the system.
    Thanks in advance.

    Hi Aparna.
    My requirement is to test the idoc with Inbound File.
    Generate a file with the data entered through segments through we19 ,and use the same file for processing through we16.
    when i am trying to do this syst complaing about
    Partner Profile not available, and some times
    port not available. and some  times with
    'No further processing defined'.
    but i maintained part profiles and port perfectly.
    Can you help me in testing with test 'File' port.

  • How to Connect to Remote ECC 5.0 System from EP ?

    Hi,
       We are using EP6.0 - located in India, and our client ECC5.0 System is in US. Can anyone please let me know the steps how to connect to Remote ECC 5.0 System?.
    Thanks in advance.
    Krishna Kumar J

    Hi,
    Finally we have successfully got connected the ECC 5.0 system which is located in the remote network thru VPN Connection using the same connecting procedure for the local R/3 System.
    Thanks & Regards
    Krishna Kumar

  • How to set synchronise to test or remote server

    I can't see which remote server will be synchronised in CS3.
    I have set up a site with a test and remote server.
    Local files are held locally, the test server is inhouse on an apache server, and the remote server is the actual webspace account.
    I can synchronise the local files to either the test or remote server, but its not clear which remote is currently set for the synchronisation. The way I;ve found so far is to select the remote or test view on the dropdown, and whichever was the last selected will synchronise with the local files. This will eventually lead to a wrong update!
    Is there a way to set or see which remote will be used to synchronise?
    Thanks
    LenW

    It is true that this is VERY badly documented, if at all.
    To summarize what many want to do (and for good reason):
    1) Developers PC. Running Dreamweaver and has the local site defined on it. No database, no server.
    2) Testing PC/Server. Running web and database servers on the local network. Typically Apache, MySQL and PHP
    3) Production Server. Out on the net somewhere.
    After this is all set up, here are the problems that one encounters:
    - When editing "normal" HTML it is fine. You edit, click test, and it saves and copies it to the test server and displays it. When done, do a "put" or "sync" and it goes to your remote site.
    - If you are editing some PHP or CSS that is not directly in the HTML page, you are screwed. Hit test, and it saves and displays your HTML page, but your new PHP or CSS code is STILL ON YOUR LOCAL MACHINE ONLY!
    - If you are constantly fine tuning PHP or CSS code, you might as well just keep a file manager window open and manually copy things around. DW just seems unable to do it.
    Of course if you want to put everything on your development PC (LAMP, XAMPP whatever), you don't hit these problems. But who wants all that crap running on your day to day machine? The testing server is a much more professional setup. And it gives you yet another free backup of your stuff. Trash an important HTML file? Just pull it back from testing server. No need to dig through backups.
    You can really never be sure what DW is going to synchronize. I only use it to PUT things to the remote production server, which seems to normally work fine. How to best keep the testing server in sync with your PC is not clear at all.
    I've seen a few suggestions, but Adobe really needs to document how to run DW in a professional fashion, not like a toy tool!
    Paul

  • I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

    I see "imac-54f9d5" under the "Shared" heading in my finder. I am not connected to any printers or other Mac devices. Is it possible that someone is remotely accessing my system? How can I figure out what this is?

    is it your imac?
    is it your your router's name?
    are you by any chance connected to another wifi router then your own because the other one was open and not password protected?

  • How does Max Find Remote Systems

    How does MAX find remote systems?
    I have written a UDP chriper as a way to solve this problem in the past, however, it seems that NI has allready solved this problem and I'd rather use what comes in the box. 
    Existing APIs or documentation would be great.
    ~Jon
    Certified LabVIEW Architect
    Solved!
    Go to Solution.

    There is a Find Systems VI on the Real-Time / RT Utilities / System Configuration palette that can find some things (like PXIs) on the network.
    BS

  • How to Test Mail's Trainable Filter?

    In the Apple Support Discussions topic No Junk mailbox in Training mode? a question arose regarding how to test if the trainable filter (the filter that evaluates the "Message is Junk Mail" condition) is evaluated independently of the other conditional tests of the Junk Filter rule -- IOW, if some other test condition in the Junk Filter rule, like sender is not in the address book, evaluates to false, does the "Message is Junk Mail" test which follows it in the rule's list of conditions ever get evaluated?
    A proposed test for this involved resending to yourself a message that Mail had previously marked as junk using the "Message > Send Again" function of Mail. It has been pointed out to me that this probably isn't a valid test because "Message > Send Again" doesn't send the original message in unaltered form (there are substantial changes in the header info regarding sender, path, etc.) & thus the filter may not consider the resent message as junk, even if it were to evaluate it.
    So, for testing purposes, does anybody have a suggestion about how to resend (or fake resending) a received message to myself without altering its header info?

    What matters is whether the Message is Junk
    Mail condition would still evaluate to true
    regardless.
    That depends on what you are trying to determine & if the test produces decisive results.
    For instance, consider tests with the standard Junk Filter automatic settings & no other rule involving "Message is Junk Mail" in the list. A test is performed in an attempt to determine if the filter's conditional tests are performed in the indicated order only until one evaluates to false.
    "Send Again" should not cause the "Message is Junk Mail" test to be evaluated at all, since in this case the sender is oneself & the Junk Filter should exit as soon as the 'sender not in Address Book' test is evaluated.
    Yet, when I try this with a message (correctly) marked as junk when originally received, the resent version is still marked as junk, & this happens not just on my on Mac but on the few others I have checked as well. I have tested with only a limited number of junk messages because on the other Macs the owners do not keep them for long & on my own I do not get that many (AOL is my primary account & has excellent spam filtering), so I would love to know if readers of this topic see similar results.
    BTW, I should mention here what might be a potential hazard of using "Redirect" for testing with "real" spam: As I hope everybody knows by now, it is a bad idea to enable automatic loading of remote html images because doing so can alert spammers one's email address is valid. In one case, when I tried the "Redirect" method on my own Mac, AOL refused to accept the redirected message, possibly because of AOL's spam filters. At that point, Mail displayed the message, asking if I wanted to try sending it from another account, edit it, or what. Even though I have the option disabled, Mail loaded the original's remote html images along with its other content. I don't know if that is a design feature of Mail, a problem with just my Mac, particular to AOL, or what, but I want readers to be aware of it, just in case.
    Anyway, for this reason I have since confined myself to testing with "Send Again," which seems safe in all cases, & mostly to testing only on my on Mac, just in case it is not.
    Back to the "so what" aspects of this topic: It may be that the "Message is Junk Mail" test is sometimes treated differently from the other conditional tests in the Junk Filter in that it may be evaluated first or even if other tests before it evaluate to false. This makes some sense as a design feature in that even if the Junk Filter's automatic mode action isn't performed, it gives users more training opportunities. It may be a bug. It may just be something particular to my Mac. It may be something else, perhaps having to do with trusting junk headers, or something more subtle as yet unconsidered.
    In any event, the point is holding all variables save one constant in any single "black box" test of a multi-variable system is a necessity for definitive results because variables may be interdependent. Because of this, the ability to resend to oneself the same message in unaltered form would be useful for a variety of tests, so I would still like to know if anyone has any ideas about how to do this.
    iMac G5/2.0 GHz 17" ALS (Rev B)   Mac OS X (10.4.7)   512 MB RAM, Kensington Trackball

  • How to test the connection between DSD backend and DSD connector

    Dear all,
    I am configuring the MDSD scenario .. and i want to insure that my customization is correct
    How to test the connection between DSD Backend and DSD connector ??

    Hi Viren,
    The problem is:
    We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
    Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
    Thanks,
    RPK.

  • How to test the data

    Hi,,
    The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
    Can you please help me how to test the data? and prepare the unit test case.
    1. Intra-plant movement of inventory between two plants with the same region Code -  In India there are two plants in the state of Maharashtra.
    Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002231 / ZU PO 4600000500
    2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
    Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002232 / ZU PO 4600000501
    3. Intra-plant movement of inventory between two Parts plants.
    Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
    NB PO# 6500002233 / ZU PO 4600000502

    Please  go thorugh this  ...
    eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script. 
    By using eCATT we can do following operations,
    ·        Test transactions, reports, and scenarios
    ·        Call BAPIs and function modules
    ·        Test remote systems
    ·        Check authorizations (user profiles)
    ·        Test updates (database, applications, GUI)
    ·        Test the effect of changes to customizing settings
    ·        Check system messages
    For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
    Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
    To develop a test script in eCATT we need to follow the following steps,
    1. Creating Test Scripts.
    2. Creating Test Data Containers[16] .
    3. Understanding System Data Containers[17] .
    4. Executing Test Configurations.
    There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
    For  details  and the screenshots     please  see the  link
    http://www.erpgenie.com/sap/ecatt/
    Reward  points if it is  usefull ...
    Girish

Maybe you are looking for