How to test if thermocouple is attached.
Hello, I am using the cRIO-9023, and the NI9213 module to read temperature from thermocouples. I give the user up to 16 thermometers allready programmed in labview to display the temperature. The issue I have is, I want to turn off the thermomiters if no thermocouple is plugged in. I called NI and they said there is no built in function to test this, so I have to check by comparing the value. for example if the units are set on fahrenheit, then if a thermocouple is not plugged in it reads at like 2500 degrees, so what I want to do is test if the type is fahrenheit, and if it is, then have my max temperature set to 2000 degrees. Then I can test IF temp ? 2000, turn off thermomiter.
How do I micic a programming statement like this:
If Type = Fahrenheit THEN maxTemp = 2000
ELSE IF Type = Celsius THEN maxTemp = 1500
Basicly I want a boolian to trigger an action of setting some indicator.
Also, if I set a indicator to dome value, how can I read it by another controll ?
I would like a way to do this without globial/local variables as my cRIO does not like them.
Thanks!
Solved!
Go to Solution.
Use a case structure or even select if you just have two possibilities.
Spoiler (Highlight to read)
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.
Similar Messages
-
How to send SMARTFORMS output as attachment through?
how to send SMARTFORMS output as attachment through e-mail?
after executing SMARTFORMS how to send that output via e-mail.
Help me.
thanks
surya.
Moderator Message: Please search for available information first
Edited by: kishan P on Nov 7, 2010 7:19 PMhi Vinod,
Can you please tell me how you have zipped the file.
I am having a text file in application server. I need to zip that file. Then the middleware moves it to Legacy system.
I used the following code. With this I am having the data in Binary format which my midleware cannot understand.
What I need on the whole is just to reduce the size of the file.
form ZIP_FILE .
DATA: lt_data TYPE TABLE OF x255,
lt_textdata TYPE TABLE OF x255.
DATA: ls_data LIKE LINE OF lt_data.
DATA: lv_dsn1(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEX.TXT'.
DATA: lv_dsn3(100) VALUE '/ECD/120/GIS/FTP/IB/DNBPAYDEXZIP.zip'.
*DATA: lv_dsn3(100) VALUE '/interfaces/SM5/test.zip'. " Contains sample1.xls and sample2.xls
DATA: lv_file_length TYPE i.
DATA: lv_content TYPE xstring.
DATA: lo_zip TYPE REF TO cl_abap_zip.
CREATE OBJECT lo_zip.
Read the data as a string
clear lv_content .
OPEN DATASET lv_dsn1 FOR INPUT IN BINARY MODE.
READ DATASET lv_dsn1 INTO lv_content .
CLOSE DATASET lv_dsn1.
lo_zip->add( name = 'sample.TXT' content = lv_content ).
lv_content = lo_zip->save( ).
*clear lv_content .
Conver the xstring content to binary
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
EXPORTING
buffer = lv_content
IMPORTING
output_length = lv_file_length
TABLES
binary_tab = lt_data.
OPEN DATASET lv_dsn3 FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT lt_textdata INTO ls_data.
TRANSFER ls_data TO lv_dsn3.
ENDLOOP.
CLOSE DATASET lv_dsn3.
IF sy-subrc EQ '0'.
MESSAGE s999(zfi_ap_gl) WITH text-t10.
ENDIF.
Can you please help.
Thanks Aravind -
How to test the extended controller and AM Object
I added a button in a OAF page and extended the CO and AM. When we click this button, an XML Publisher concurrent program should be called and the PO will be displayed in PDF format.
What is the best way to test this. Should I copy all the libraries from oracle/apps/... to my pc and attach or can I test without doing this. If so, what is the best approach.
I am new to this.
Thanks for your Help.
HPI got the code ready for with extended Co java file. How can test this. How to generate the class file. Once I gerenarate the class file, if I ftp the file to cust/oracle/apps/pos/changeorder/webui and in the personalization if I attach this CO and run the page and click the button will this call the new CO? Yes after FTP the Contorller class file to appropriate path and attach the extended controller through personalization New Controller will get called.
But DO REMEMBER TO BOUNCE THE APPACHE SERVER then only the extended Controller file get called.
here is the link having steps to bounce it for Apps 11i.
http://oracleanil.blogspot.com/2009/04/ncrimmessageproc.html
Please let me know if these steps are correct..
1. New OAWorkSpace
2. New Project
3. right click on project and click New class to generate the extended CO Class.Yes, It is right..
Thanks
--Anil
http://oracleanil.blogspot.com -
How to email report ouput as attachment
Hi,
Can anybody tell me how to email report ouput as attachment.
Regards,
Soumya.Hi
check this
Refer this link:
FORM send_mail_2 USING msgid msgno msgv1.
mailuser oder Gruppe like sy-uname default 'Ruckerk'.
DATA: express_hold_time LIKE sovaltime.
DATA: text LIKE sotxtinfo.
DATA: receiver LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
MESSAGE ZF100 (FTP an UDB fehlgeschlagen)
text-msgid = msgid.
text-msgno = msgno.
text-msgv1 = msgv1.
text-msgv2 = ' '.
text-msgv3 = ' '.
text-msgv4 = ' '.
express_hold_time
express_hold_time-days = 01.
express_hold_time-h_min_sec = 240000.
receiver
receiver-receiver = mreceivr.
Gruppe von Empfängern
receiver-rec_type = 'C'.
und Expressmeldung ausgeben
receiver-express = 'X'.
APPEND receiver.
CALL FUNCTION 'MESSAGE_SEND_AS_MAIL'
EXPORTING
msgid = text-msgid
msgno = text-msgno
msgv1 = text-msgv1
msgv2 = text-msgv2
msgv3 = text-msgv3
TABLES
receivers = receiver.
IF sy-subrc <> 0.
WRITE:/ 'hat nicht geklappt', 'SY-SUBRC =', sy-subrc.
ENDIF.
PERFORM print_error_report.
Fehlermeldung zum Abbrechen des Report's ausgeben.
MESSAGE e398 WITH 'Jobabbruch' msgv1.
ENDFORM. " SEND_MAIL_2
Another Program:
*& Report ZSENDEMAIL *
*& Example of sending external email via SAPCONNECT *
REPORT zsendemail .
PARAMETERS: psubject(40) type c default 'Hello',
p_email(40) type c default '[email protected]' .
data: it_packing_list like sopcklsti1 occurs 0 with header line,
it_contents like solisti1 occurs 0 with header line,
it_receivers like somlreci1 occurs 0 with header line,
it_attachment like solisti1 occurs 0 with header line,
gd_cnt type i,
gd_sent_all(1) type c,
gd_doc_data like sodocchgi1,
gd_error type sy-subrc.
data: it_message type standard table of SOLISTI1 initial size 0
with header line.
*START-OF-SELECTION.
START-OF-SELECTION.
Perform populate_message_table.
*Send email message, although is not sent from SAP until mail send
*program has been executed(rsconn01)
PERFORM send_email_message.
*Instructs mail send program for SAPCONNECT to send email(rsconn01)
perform initiate_mail_execute_program.
*& Form POPULATE_MESSAGE_TABLE
Adds text to email text table
form populate_message_table.
Append 'Email line 1' to it_message.
Append 'Email line 2' to it_message.
Append 'Email line 3' to it_message.
Append 'Email line 4' to it_message.
endform. " POPULATE_MESSAGE_TABLE
*& Form SEND_EMAIL_MESSAGE
Send email message
form send_email_message.
Fill the document data.
gd_doc_data-doc_size = 1.
Populate the subject/generic message attributes
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SAPRPT'.
gd_doc_data-obj_descr = psubject.
gd_doc_data-sensitivty = 'F'.
Describe the body of the message
clear it_packing_list.
refresh it_packing_list.
it_packing_list-transf_bin = space.
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
describe table it_message lines it_packing_list-body_num.
it_packing_list-doc_type = 'RAW'.
append it_packing_list.
Add the recipients email address
clear it_receivers.
refresh it_receivers.
it_receivers-receiver = p_email.
it_receivers-rec_type = 'U'.
it_receivers-com_type = 'INT'.
it_receivers-notif_del = 'X'.
it_receivers-notif_ndel = 'X'.
append it_receivers.
Call the FM to post the message to SAPMAIL
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
exporting
document_data = gd_doc_data
put_in_outbox = 'X'
importing
sent_to_all = gd_sent_all
tables
packing_list = it_packing_list
contents_txt = it_message
receivers = it_receivers
exceptions
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
others = 8.
Store function module return code
gd_error = sy-subrc.
Get it_receivers return code
loop at it_receivers.
endloop.
endform. " SEND_EMAIL_MESSAGE
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
form initiate_mail_execute_program.
wait up to 2 seconds.
if gd_error eq 0.
submit rsconn01 with mode = 'INT'
with output = 'X'
and return.
endif.
endform. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Anji -
Doubt about How to test the BAPI
Hi Experts,
I have one doubt. How to test one BAPI. I have BAPI_DOCUMENT_SAVEOBJECTLINKS
I am using this BAPI to attach the document to the material. I opened se37 .Here how to test the BAPI wether the BAPI is Suitable to attach the document or not. Please let me know . Its very urent.
Helpful answers may be reward points
Regards
KhannaHi,
First you have to create a new document using CV01N tcode. Here leave the document field as blank, document type value can be choosen from F4 help and document part and document version can be given as 0. Press enter and add the necessary values and save. It will then create a new document. Using that document go to SE37 and execute the BAPI. In the BAPI also you need to give the document no that is generated, and document type, document part and document version of the newly generated document. In the OBJECTLINKS table of the BAPI give the material number and other details. Please see the function module documentation of this BAPI also.
Please reward points if it helps.
Regards
Vimal -
How do I open a mime attachment on my iphone ?
How do I open a mime attachment on my iphone email?
You can't.
All attachments must be encoded before being sent and MIME 1.0 is the industry standard for message encoding.
When receiving a message with an attachment file type that cannot be recognized by the email client and/or by the computer/device used, MIME attachment will appear instead.
This can mean the attachment that was sent is a file type that cannot be accessed/viewed by the iPhone. I also see the same on occasion when a received message was forwarded by the sender and the message received by the sender contains an attachment that can be accessed/viewed by the iPhone but the original message that was forwarded was composed in HTML which can do screwy things with email on occasion - personally I wish HTML would be forbidden with the exchange of email - this along with forbidding the use of the AOL program to send email with attachments. -
How to test a simple PL SQL function from another PL SQL script
Hi,
I have created a function. Now i need to test that whether it is returning the correct values or not.
For that, i have written anothe pl sql script and trying to call this function. Im passing all the IN parameters in that function. I assume here that OUT parameters will provide me the result. Im trying to display the OUT parameter one by one to see my result.
I'm using toad as sql client here connected with oracle.
pl sql script:-
DECLARE
BEGIN
DBMS_OUTPUT.PUT_LINE('$$$$$$$ VINOD KUMAR NAIR $$$$$$$');
FETCH_ORDER_PRODUCT_DATA(320171302, 1006, 6999,
ODNumber OUT VARCHAR2, Line_Number OUT VARCHAR2,
ServiceID OUT VARCHAR2, BilltoNumber OUT VARCHAR2,
AnnualPrice OUT NUMBER, CoverageCode OUT VARCHAR2)
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ODNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | Line_Number );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ServiceID );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | BilltoNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | AnnualPrice );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | CoverageCode );
END;
Function:-
Program Name : SPOT_Order_Product_Data_For_CFS.sql
Description : Function to Validate parameters from CFS
By : Vinod Kumar
Date : 08/19/2011
Modification History
By When TAR Description
CREATE OR REPLACE FUNCTION FETCH_ORDER_PRODUCT_DATA(orderNumber IN VARCHAR2, customerNumber IN VARCHAR2,
productLine IN VARCHAR2, ODNumber OUT VARCHAR2,
Line_Number OUT VARCHAR2, ServiceID OUT VARCHAR2,
BilltoNumber OUT VARCHAR2, AnnualPrice OUT NUMBER,
CoverageCode OUT VARCHAR2)
RETURN VARCHAR2 IS
lv_err_msg VARCHAR2(100) := '';
lv_bucket_id VARCHAR2(14);
lv_bill_number VARCHAR2(30);
lv_anual_price NUMBER;
lv_coverage_code VARCHAR2(8);
lv_quote_num NUMBER(10) := NULL;
lv_line_num NUMBER(5) := 0;
lv_customer_number VARCHAR2(30) := customerNumber;
lv_product_id VARCHAR2(14) := productLine;
lv_count_quote NUMBER := 0;
lv_quote_status VARCHAR2(5);
lv_quote_version NUMBER(2):=0;
BEGIN
IF INSTR(orderNumber, '-') = 0 THEN
lv_quote_num := orderNumber;
ELSE
lv_quote_num := SPT_Delimiter(orderNumber, 1, '-');
lv_line_num := SPT_Delimiter(orderNumber, 2, '-');
END IF;
--Check status of the quote COM, APP
SELECT COUNT(*) INTO lv_count_quote FROM sot_order_header WHERE ORDER_NUMBER=lv_quote_num
AND ORDER_STATUS IN ('APP', 'COM') AND CUSTOMER_NUMBER = lv_customer_number;
IF lv_count_quote = 0 THEN
lv_err_msg := 'Invalid Order number';
RETURN lv_err_msg;
END IF;
-- Fetch the latest version on SPOT quote
SELECT MAX(VERSION_NUMBER) INTO lv_quote_version FROM SPT_QUOTE_HEADER WHERE QUOTE_NUMBER = lv_quote_num
AND CUSTOMER_NUMBER = lv_customer_number;
-- If quote is valid fetch the data in OUT parameters
IF lv_line_num = 0 THEN
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.LINE_NUMBER, b.BUCKET_ID,
b.ANNUAL_REF_RATE_USD, b.COVERAGE_CODE
INTO lv_bill_number,lv_line_num,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple PIDs existing in the SPOT order, please provide the SPOT order + line number as input data';
RETURN lv_err_msg;
END;
ELSE
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.BUCKET_ID, b.ANNUAL_REF_RATE_USD,
b.COVERAGE_CODE
INTO lv_bill_number,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id
AND b.LINE_NUMBER = lv_line_num;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple SPOT lines exist with same parameter';
RETURN lv_err_msg;
END;
END IF;
EXCEPTION
WHEN OTHERS THEN
lv_err_msg := '@@@ EXCEPTION THROWN @@@ '|| SUBSTR(SQLERRM,1,120);
RETURN lv_err_msg ;
END;
Don't look at the function, it might have errors but my primary concern is how to test this function. Once I start doing its testing then only i can understand any bugs(if any).
My pl sql is not so good. Im still learning. I don't understand IN and OUT parameters are.
I just know that IN parameters r those whick we pass in to the function wen we call it and OUT parameters are those through which we get the result.
Thanks in advance
Vinod Kumar Nair20100511 wrote:
I wondered how I could test the output of the function from within TOAD?I usually create the following function in my developer schema:
create or replace function BoolToChar( b boolean ) return varchar2 is
begin
if b then
return( 'TRUE' );
else
return( 'FALSE' );
end if;
end;To test a function like yours, the following will do in SQL*Plus/TOAD/etc:
begin
DBMS_OUTPUT.put_line(
BoolToChar( XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) )
end;
I'm probably doing 101 things wrong here, but thought I'd ask anyway and risk being shouted at.Shout at? You reckon? I thought people risked being beaten with a lead pipe, or pelted with beer cans and stale pretzels - which makes being shouted at a really safe and viable alternative. {noformat};-){noformat} -
Since upgrading to Mavericks, 10.9.1, pictures that come attached to emails no longer display. There is only a blank space that after about 1 minute, has a small box with a question mark. Double clicking on the box will open the image in a separate window. It's very slow and tedious for multiple images. How can I go back to attached and displayed images? If I click on "Forward", the images appear instantly in the email to be forwarded.
Scott,
My problem seemed to fix itself. Or, by shutting down the computer one night, instead of putting it to sleep, may have reset something. Since updating to Mavericks, I always (or usually) let the computer sleep overnight or anytime I'm walking away from it. A few days ago, I was updating notes for my kids about how to find all my stuff and how to turn on my computer, so I wanted to rewrite the start-up procedures for the iMac, just in case they ever need to. Well, I shut it down one night so the following morning, I could write down each step. Lo and behold, the images, etc. are all there again! Solved, but I'm not sure why.
Tom -
How can I print only the attachment without the email content
How can I print only the attachment without the email content. Every time I send to print, It prints the email itself with the attachment- can I cancel that?
Hello Riklama,
When you first open the attachment (e.g. on your phone) than you can mail only that attachment. Works fine with my husbands blackberry.
Elsy -
How to test the migrated workflows in SharePoint 2013
Hi, we are migrated the portal from SharePoint (Moss) 2007 to SharePoint 2013 using Doc Ave tool.
Now my concern is how to test all (OOTB and SharePoint Designer) workflows are working properly in SharePoint 2013.
How to approach? Any ideas/help will be appreciated.Hi Ashok,
Have the business users that use them or the folks that created them test them in the DEV environment prior to the PRD migration...
-Ivan -
How to test domain controller on upgraded Win Server 2008 R2
The windows team recently upgraded the development environment for the domain controller from 2003 to Windows 2008 R2 and I am to test the Idm functionality on this upgraded version. Our current configuration is that the DC and Idm gateway runs on different machines. To test this new DC, i want to install the idm gateway on that server and run some onboarding and termination test cases just to make sure if the AD connection is working on the upgraded DC. But i am getting ’Input/output error’ when i try to install the service and from the documentation it says 'The most common cause of this is that you do not have rights to work with this service.'. The server admin tried installing the gateway with his id as well and it failed. He tested installing in on the 2003 version of DC and it worked, so its not a matter of permission (i think..)...
Does anyone have any better idea on how to test an upgrade of a DC from version 2003 to 2008 R2? Any help in this matter is appreciated. We are running Idm 8.1 on a Windows platform and an upgrade to OW 8.1.1. Patch 2 is also in the works..
Thanks in advance.I may have found a workaround. Can you try to change the "compatibility mode" in 2008 R2 to "Windows XP SP3" and see if it will install?
Admittedly I have not done this myself so I'm not entirely sure where or how it's done, but I have confirmation it resolves the issue from others who have faced it. -
Hi all,
could please explain how to test the payload in xi and with steps.
Thanks in advance,
RadhikaHi Radhika,
You can test in three ways.
1.) In message mapping directly give the relevant data and then execute. Here you can test whether the mapping is correct or not.
2.) In Integrstion Directory after completing and activating the Configuration, in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
3.) In RWB in COmponent monitoring. Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
Now give user name and pass word.
Paste the payload from massage mapping and then press test tab. Here yoyu can directly send the message from XI server to the receiver system.
Ok,
Jeevan -
How to test the rule if multiline container is passing to the task?
Hi Experts,
I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.Hi Pavan,
Thank you.
To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija -
How to test a plug_in without Adobe Reader Integration Key?
I havge a project to create a plug_in for acrobat reader with Adobe Acrobat 8.1 SDK. I also apply for the Adobe Reader Integration Key, but I have not it by now. But deadline of the project is coming, is there any one who can tell me how to test the plug_in without Adobe Reader Integration Key?
I also have another question, does the plug_in I make with Adobe Acrobat 8.1 SDK can be compatible for all the version of Acrobat reader, such as 7.0, 8.0 and so on? Thank you.You test the plug-in, as well you can, using Acrobat. You also build
it using the preprocessor options to build a Reader plug-in, so you
don't accidentally use an API not in Reader.
If you are saying, is there w way around the Integration key for
testing in Reader, the answer is no.
Different Reader keys and tools are needed for each version of Reader.
You will probably not get a key for an old version of Reader.
Aandi Inston -
How Do I Open a PDF attachment in IOS 8 mail app?
Hi all,
I am curious how do I open a pdf attachment in IOS 8 mail app?Hi,
My friend has what you stated = a square with and arrow coming out the top and works as expected
BUT I don't
what happens to me - is the small muti page opens and does NOT show a pdf ICON - BUT DOES show only the first page and I DO NOT GET = a square with and arrow coming out the top TO CLICK ON!
So it seems the normal behavior is not happening - how can I fix this - to see ALL pages and or open pdf in another pdf app?
Maybe you are looking for
-
HT3597 How do you exit voice control on iPhone 4, with iOS7.1.1?
How do you exit voice control on iPhone 4, with iOS7.1.1?
-
Since updating to ios7, there is a huge delay in whatever I type! Please help!
-
Accessing my nokia 5800xm (xbox 360)
i used to b a ericsson fan but recently bought this phone n love it, i used to play music from my sony ericsson thru my xbox 360, but i am unable to do so with my nokia 5800xm via usb cable (even after selecting all the usb option available)...can an
-
I bought more cloud storage as the ipad was full. But when I tried to download a TV episode, I got a message that my Ipad was full, even though the icloud is showing plenty of space. What to do?
-
Enhanced field was not visible in DataSource
Hi , I Enhanced one field to DataSource, But it is not visible in that datasource. T he procedure which i followed is: RSA6 -> Select DataSource -> Click on "Enhance Exctract Structure" -> It will show Append Structure -> Continue -> Add filed -> Act