How to test my built-in ethernet?
Hello,
Got a G4 MDD dual 1.25 and my question pertains to testing the on-board ethernet port. Is there a way to test this without having to plug something into it? All I want to do is make sure its working. While I am using airport, the built-in ethernet port says its not active.
Launch the Network utility in Apllications/Utilities/ and you should be able to see the Ethernet device...
yes, t does dissapear from the system preferences network pane when not in use : )
Similar Messages
-
Built-In Ethernet Port Doesn't Show Up In The Network Preference Pane
My ethernet port no longer shows up in the Network preferences pane under Network Status. The status Airport and the Internal Modem are still displayed though. Plugging in an ethernet cable causes my machine to crash; sometimes I get a message that I need to hold down the power button to reboot, and other times command line-like text is displayed on top of whatever was on screen.
The only change I've made to my system since last using a wired connection was installing Security Update 2006-001 on March 1st and OS X Update 10.4.5 on February 14th. After running the 10.4.5 updater, my machine initially refused to reboot. On the first attempt, it played the start up chime, but the screen remained black. The second time, the Apple logo appeared, but the spinning pinwheel never did. The third attempt was successful and my system appeared to be functioning normally.
How do I get my ethernet port to work again?Does "Built-in Ethernet" show up as a choice in the 'Show:" popup? If so, is it configured as you would expect? For instance, if "TCP/IP" is set to use DHCP, do you have an IP address, subnet mask, etc.? There is an "off" setting for TCP/IP; make sure that hasn't been selected somehow.
There is also an "Assist Me" button that will let you launch the diagnostics app. Does this also crash the Mac? If not, what are the results of its tests?
Also, you may want to do a permissions repair with Disk Utility if you haven't done this since applying the updates.
If you still get crashes, there may be a conflict with a log-in item, particularly if you have any third party ones. (Check that in the "Accounts" pref.) One way to diagnose things like that is by creating a new test account & logging into it. If the problems go away, you can assume a user cache, .plist, or login item is the problem.
If none of this turns up anything, you may need to reinstall the OS. Short of that, you can try downloading the 10.4.5 combo update & running it. It replaces more components than the "delta" update so it just might do the trick. Besides, if you end up having to reinstall the OS, having the combo version handy will save you the time of downloading & installing any incremental updates to get back to 10.4.5.
As always, backup all important files before applying any updates.
Good luck! -
Built-in ethernet port not working in unibody Mac Mini
Hi,
So ever since I acquired this new mac mini I haven't been able to get it to recognize any devices connected via ethernet. I obviously checked the cables and all is good there. I tried connecting it to another mac, and while the other machine was detecting a device (the mac mini) at the other end of the cable, the mac mini kept saying that the cable is unplugged or the device off.
After several days of having the issue I decided to remove the ethernet service from the network preference pane to set it up again but to my surprise, the built-in ethernet option was not available (I only got airport, firewire, bluetooth DUN, VPN, PPPoE and 6 to 4). At this point I tried removing the networkinterfaces.plist file form the system configuration folder in the system preferences folder to no avail. I then tried to zap the PRAM, NVRAM, reset the SMU, SMC and all that kind of things to get the port recognized by the system but no luck.
When I look at the system profile I get these weird results in Ethernet Cards:
pci14e4,4353:
Type: Other Network Controller
Bus: PCI
Vendor ID: 0x14e4
Device ID: 0x4353
Subsystem Vendor ID: 0x106b
Subsystem ID: 0x0093
Revision ID: 0x0001
Link Width: x1
BSD name: en0
Kext name: AppleAirPortBrcm43224.kext
Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AppleAirPortBrcm 43224.kext
Version: 425.16.2
Comparing it to other macs I have It should read "ethernet" rather than that strange pci name on top and the kext name shouldn't read airport but something like AppleIntel and in location it shouldn't direct to the IO80211Family.kext package but rather to the IONetworkingFamily.kext.
So I popped in the system install DVD and fired up System profiler and at that point I didn't even get an "ethernet cards" option in the left side pane. So this is leading me to believe that the hardware is not being recognized at all, so maybe it's damaged. I did replace the HDD with a bigger one and change the RAM modules to bigger ones but I don't think I could have damaged the hardware in these processes, also I don't see how this would affect the ethernet port as it's integrated to Motherboard and didn't messed with it at all (I was very careful, to say the least!).
The last thing to do is reinstalling the system but I don't think it'll help (after seeing that the ethernet port is not even being detected by the install OS) but I need to offload all the data from my internal disk and at the moment I don't have an spare drive to do it.
So, what's the recommendation? A field trip to an Apple Store? Closest one is like 3,000 km from where I am right now, so...
Well, thanks for any pointers, suggestions and help in general.I do not have any answers for you. Yes it appears to be reading what should be an ethernet card as an AirPort card. Have you played around with trying to install another version of Mac OS X other than the version that shipped with the Mac mini? Apple has long told us that we should not install a version of Mac OS X that was older than the shipping version. With the Mid 2010 Mac mini, the Restore DVD has the only version of Snow Leopard that will work with this Mac mini's specific hardware. At least until Apple releases 10.6.5. If you have installed other versions of Mac OS X, then erasing the HDD and installing the OS from the Restore DVD(s) that shipped with the mini may get you back to the point you need to be.
Unfortunately I think that you voided your Apple Warranty when you installed the different HDD. That was always a question in the past when folks wanted to open the former version of Mac minis and upgrade the RAM. But with the 2009 models folks started reporting here in the Apple Discussions that Apple was informing them that they had voided their warranty by opening their Mac mini. This new model made the RAM user upgradable, but the User Manual specifically states on page 43, 54 and 61 that there are no user serviceable parts in the Mid 2010 Mac mini except the memory.
Dah•veed -
Can't connect via Built-in ethernet
Can connect to internet via AirPort, but not by Built-in Ethernet. Network status says "The cable for the Built-in Ethernet is not plugged in". BUT it is and it is live because I have plugged it into another computer and it works fine. How do I check out the MAC hardware. Modem light for LAN Ethernet is on and blinks when cable is connected to the MAC. When I do the network diagnostics, there is a red light for the Built-in Ethernet.
Hi K8TW, and a warm welcome to the forums!
While you may get help or a solution here, It's quite acceptable to start a new topic of your own, certainly feel free to start a new topic to attract more helpers to your particular situation, here's a link if as is often the case, it's hard to find out where to do it...
http://discussions.apple.com/post!default.jspa?forumID=755
If you do you might include this info...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Network, then highlight Built-in Ethernet & paste this info...
Built-in Ethernet:
Type: Ethernet
Hardware: Ethernet
BSD Device Name: en0
IPv4 Addresses: 10.0.1.11
IPv4:
Addresses: 10.0.1.11
Configuration Method: Manual
Router: 10.0.1.12
Subnet Masks: 255.255.255.0
Proxies:
Proxy Configuration Method: Manual
ExcludeSimpleHostnames: 0
FTP Passive Mode: Yes
Auto Discovery Enabled: No
Ethernet:
MAC Address: 09:c6:cb:3f:ad:55
Media Options:
Media Subtype: autoselect -
Can't Use Built-in Ethernet-HELP!!!
I am trying to connect a slot loading 350 mhz imac to the internet through the built-in ethernet for a friend that needs it, but the network status pane (OSX.3 Panther) keeps saying the ethernet cable is not plugged in. I've tried several different Cat 5 ethernet cables and it still says this, so we can't connect to the isp (with cable modem). It also says the internal modem is not working, I get the red light next to it and the built-in ethernet buttons in Network status. I've tried direct connections to two different external cable modems, and three different ethernet cables, I think the problem is a software issue that needs correcting. I just got through with a clean install of OS 9.1 and OSX.3, but the network still does not recognize the ethernet cable as being plugged in.
Other things I've tried: zapping the PRAM, and resetting the nv-ram, but to no avail (as suggested by other posts I've come across). I ran Tech Tool 4 on it however,and the Network test PASSED.
Isn't there something I can do in Preferences or terminal so the network can see the built-in ethernet? I'd really appreciate any ideas or suggestions!
Thanks, ChuckYou can easily restore without updating to the latest OS - simply don't purchase it. You can restore from iTunes - on the Summary page, just click on Restore.
As to your WiFi problem (and that is what you most likely experiencing) tell us more about the network you are using, the hardware, who the heck your ISP is and so on. It may be as simple as whoever owns the network is blocking access to Apple sites.
I am assuming by built in sites, you are referring to the App Store, iTunes, etc. correct?
If your network indicates that you are logged in, tap Settings > WiFi. Does your network have a check mark next to it? If it does, tap the blue arrow (>) next to the name. Does your IP address start with 169.x or 192.x? -
Hi,,
The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
Can you please help me how to test the data? and prepare the unit test case.
1. Intra-plant movement of inventory between two plants with the same region Code - In India there are two plants in the state of Maharashtra.
Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002231 / ZU PO 4600000500
2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002232 / ZU PO 4600000501
3. Intra-plant movement of inventory between two Parts plants.
Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
NB PO# 6500002233 / ZU PO 4600000502Please go thorugh this ...
eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script.
By using eCATT we can do following operations,
· Test transactions, reports, and scenarios
· Call BAPIs and function modules
· Test remote systems
· Check authorizations (user profiles)
· Test updates (database, applications, GUI)
· Test the effect of changes to customizing settings
· Check system messages
For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
To develop a test script in eCATT we need to follow the following steps,
1. Creating Test Scripts.
2. Creating Test Data Containers[16] .
3. Understanding System Data Containers[17] .
4. Executing Test Configurations.
There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
For details and the screenshots please see the link
http://www.erpgenie.com/sap/ecatt/
Reward points if it is usefull ...
Girish -
Network assistant can't find my router. The led from the LAN on the router doesn't go on and I'm afraid the Ethernet card is not working anymore. Wireless is no problem.
I test the computer with the test software from apple and it gives no errors.
Maybe I overlook something, but for so far I know, the led should go on as soon you connect the cable.Turn off the computer, router, and cable/DSL modem. Wait at least one minute. Remove the router and connect the cable/DSL modem directly to your computer's Ethernet port. Turn on the cable/DSL modem and wait for the status lights to indicate communication with your ISP. Then turn on the computer. Verify your Network preferences are properly configured for the Built-In Ethernet port and is set to use DHCP. If the computer pulls a valid IP address and you have internet access then your computer's Ethernet port is working fine.
Turn everything off again. Wait at least one minute. Re-connect the router. Turn on the cable/DSL modem and wait until the status lights indicate communication with your ISP. Turn on the router and wait until its status light indicates communication with the modem. If no communication is established then you know the router is bad. If there is communication then turn on the computer. If there's no communication between the router and computer then the router is bad. -
I am using cf 7.0.2.I want to use coldfusion remoting.
Please let me know if I need install other software and how
to make it work.
I also need to know how to test the function.Thanks
Markmark416 wrote:
> I am using cf 7.0.2.I want to use coldfusion remoting.
>
> Please let me know if I need install other software and
how to make it work.
>
> I also need to know how to test the function.Thanks
>
> Mark
flash remoting is built-in in CF7, and unless you need to
enable
integration of webs services, you do not need to change
anything
to test if fr is enabled, just go to
http://localhost/flashservices/gateway
- if you see a blank page in
response you are good to go
you will obviously need MM/Adobe Flash to make flash movies
that
get/post data with remoting... keep in mind, though, that
flash
remoting components were included with Flash only up to ver 8
(Flash CS3
does not have them at all, since it uses a different approach
altogether; though you can still make it work with components
for
previous flash versions, it is a bit of a PIA...)
i am sure others will add a lot to this (i am just a casual
flash
remoting coder/user - it is not my sharpest knife...)
a few websites that helped me get going were:
http://www.asfusion.com/blog/entry/remoting-for-coldfusion-flash-forms
(and a lot of other pages in that blog + read comments too!)
http://articles.techrepublic.com.com/5100-22-1050210.html#
http://blog.vixiom.com/2007/04/17/actionscript-20-flash-remoting-with-flash-cs3/
http://www.builderau.com.au/program/web/soa/Consuming-Web-services-in-Flash-MX/0,339024632 ,320282917,00.htm
hth
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
How to test context or popup Menus for a Composite.
Hello SWTBot gurus and fellow users,
Question: I'm wondering if it is possible and, if so, how to test a context (popup, right-click) Menu that is set for a Composite.
So far, I've only seen examples where the context Menu is for an item in a Tree. I've also tried using the built-in context Menu finders with no luck.
I have some sample code below for a simple Composite with a context Menu and SWTBot test code.
Thanks in advance for any pointers, clues, etc.
Jordan
Example: Here are a couple of test classes to demonstrate the problem.
The Composite being tested. A simple Composite with a context Menu set for it. The Menu is built using a JFace MenuManager.
import org.eclipse.jface.action.Action;
import org.eclipse.jface.action.MenuManager;
import org.eclipse.swt.SWT;
import org.eclipse.swt.layout.FillLayout;
import org.eclipse.swt.widgets.Composite;
public class TestComposite extends Composite {
public boolean menuItemClicked = false;
public TestComposite(Composite parent) {
super(parent, SWT.NONE);
setLayout(new FillLayout());
final MenuManager menuManager = new MenuManager();
menuManager.add(new Action("bleh") {
@Override
public void run() {
menuItemClicked = true;
System.out.println("bleh clicked...");
setMenu(menuManager.createContextMenu(this));
return;
The SWTBot test code.
import org.eclipse.swt.widgets.Display;
import org.eclipse.swt.widgets.Shell;
import org.eclipse.swtbot.swt.finder.SWTBotTestCase;
import org.eclipse.swtbot.swt.finder.junit.SWTBotJunit4ClassRunner;
import org.eclipse.swtbot.swt.finder.widgets.SWTBotShell;
import org.junit.Test;
import org.junit.runner.RunWith;
@RunWith(SWTBotJunit4ClassRunner.class)
public class TestCompositeTester extends SWTBotTestCase {
private Shell s;
private TestComposite c;
@Test
public void checkContextMenuItem() {
final Display display = Display.getDefault();
display.syncExec(new Runnable() {
@Override
public void run() {
s = new Shell(display);
c = new TestComposite(s);
SWTBotShell botShell = new SWTBotShell(s);
botShell.contextMenu("bleh").click();
assertTrue(c.menuItemClicked);
The failure trace when running the SWTBot test code.
org.eclipse.swtbot.swt.finder.widgets.TimeoutException: Timeout after: 5000 ms.: Could not find context menu with text: bleh
at org.eclipse.swtbot.swt.finder.SWTBotFactory.waitUntil(SWTBotFactory.java:437)
at org.eclipse.swtbot.swt.finder.SWTBotFactory.waitUntil(SWTBotFactory.java:411)
at org.eclipse.swtbot.swt.finder.SWTBotFactory.waitUntil(SWTBotFactory.java:399)
at org.eclipse.swtbot.swt.finder.widgets.AbstractSWTBot.contextMenu(AbstractSWTBot.java:442)
at org.eclipse.swtbot.swt.finder.widgets.AbstractSWTBot.contextMenu(AbstractSWTBot.java:423)
at sandbox.plugin.TestCompositeTester.checkContextMenuItem(TestCompositeTester.java:29)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:50)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:12)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:47)
at org.junit.internal.runners.statements.InvokeMethod.evaluate(InvokeMethod.java:17)
at org.junit.runners.ParentRunner.runLeaf(ParentRunner.java:325)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:78)
at org.junit.runners.BlockJUnit4ClassRunner.runChild(BlockJUnit4ClassRunner.java:57)
at org.junit.runners.ParentRunner$3.run(ParentRunner.java:290)
at org.junit.runners.ParentRunner$1.schedule(ParentRunner.java:71)
at org.junit.runners.ParentRunner.runChildren(ParentRunner.java:288)
at org.junit.runners.ParentRunner.access$000(ParentRunner.java:58)
at org.junit.runners.ParentRunner$2.evaluate(ParentRunner.java:268)
at org.junit.runners.ParentRunner.run(ParentRunner.java:363)
at org.eclipse.swtbot.swt.finder.junit.SWTBotJunit4ClassRunner.run(SWTBotJunit4ClassRunner.java:54)
at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:86)
at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:459)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:675)
at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:382)
at org.eclipse.swtbot.eclipse.core.RemotePluginTestRunner.main(RemotePluginTestRunner.java:64)
at org.eclipse.swtbot.eclipse.core.UITestApplication.runTests(UITestApplication.java:117)
at org.eclipse.e4.ui.internal.workbench.swt.E4Testable$1.run(E4Testable.java:73)
at java.lang.Thread.run(Unknown Source)Your DBA should be able to help you..........
-
Built in Ethernet not being recongnized
I have a Mac Pro Tower 2.66 version 1.1, 2006 model and the built in Ethernet in not being seen by the system. I have tried multiple things to get it to work but I'm about positive it's a logic board issue. I tried tons of tips, throwing away Network.plist files and others suggestions but still it's not showing up. I also put in a new ethernet card and it still wouldn't show up. I installed a new system on a clean drive and booted from it and it has the same issues so I don't see it being a preference. System profiler shows no ethernet at all on the computer.
So my issues aren't that I can't connect to the internet because I installed a Airport card after the issue started so I at least have access to my network. My problem is that the Mac App Store looks like it requires you to have a ethernet card which has a MAC Address built into the ethernet card and that is how it recognizes the computer. iTunes works fine because it must have some other identification method but I can't get the Mac App Store, iCloud or iTunes Match to work. It won't recognize my Apple id on the Mac App Store or iCloud, but iTunes recognize may Apple id and it works fine and it also works on all of my iDevices.
So here is the delema I can't update Apps that I bought on the Mac App Store, nor can I download new apps and some of the Apps I bought won't work because it can't identify my computer with the Apple id to show I purcased the App.
I have talked to tech support and all they do is tell me to scan the Apple Support Communities which I have and many web searches too. I have seen that this model Mac Pro must be prone to having issues with built in Ethernet failing, but I haven't found a work around to log into the App Store. So I am hoping someone knows a way to get around the Ethernet MAC Address issue, maybe trick the system into thinking it has a ethernet card or just a different way for the App Store to identify the computer.
Thanks for any help,rkem, Welcome to the discussion area!
Not sure why you posted here in the iMac G4 discussion area.
Since your issue is with a MacBook, you should post in the appropriate MacBook discussion area. -
How to test RAM and HDD (Hard Drive).
Introduction
HP machines have built-in Bios testers for RAM and HDD's.
To use them you need to enter Bios by pressing F10 on startup. They are placed under ' Diagnostics menu '.
Why I wrote this guide and complicate whole situation?
There are three reasons:
This testers are not so great and sometimes they do not detect problems which you may have with your hardware. It's recommended to use more advanced tester for RAM and manufacter diagnostic programs to test HDD's.
Not always you will be able to enter Bios. Sometimes corrupted hardware is blocking possibility to run it.
Advanced diagnostic softwares for hard drives allow to fix some problems.
Table of Contents:
A How to test RAM with Memtest86+.
B How to test HDD (Hard Drive).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **Ad. A
There are few possibilities to run this program. In this guide I will present how to run it from:
CD
and
USB Flash Drive.
First we need to burn Memtest86+ on a CD or prepare properly USB Flash drive with a special tool.
Here you will find Memtest86+ home page from which you will be able to download correct version of this software.
Solution 1. CD:
Download ' Pre-Compiled Bootable ISO (.zip) ' and extract it with 7-Zip(free) or WinRar.
Download CDBurnerXP from here. Install this program and run it.
Choose ' Browse ISO image '.
and point Memtest86+ iso file.
Click ' Burn disc '.
Wait until burning process will finish.
Choose ' OK '.
Exit from program.
Solution 2. USB Flash Drive:
Download ' Auto-installer for USB Key (Win 9x/2k/xp/7) ' and extract it with 7-Zip(free) or WinRar.
Connect USB Flash Drive to one of USB ports. Run ' Memtest86+ 4.10 USB Installer '.
Click ' I Agree '.
Select USB Flash Drive and check box to format it.
Caution!
Format process will erase all information from USB Flash Drive. If you have there something important then please backup this data first.
Choose ' Create '.
Wait until process will finish and click ' Next '.
Exit from program by choosing ' Finish '.
How to run Memtest86+.
Leave USB Flash drive in USB port or CD in CD/DVD drive. Restart your system and on startup press F9 key repetitively:
After this step you will be able to select from which device you want to boot. Choose from the list ' USB Hard Drive ' if you have prepared USB Flash Drive (like on below photo) or ' Optical Disk Drive ' if you have prepared CD:
How to use Memtest86+ to test RAM?
Do at least 2 - 3 passes. In Errors column may show up only 0. If it's other number then you need to replace corrupted RAM stick.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
Although I seem to have come up with a solution regarding very slow file transfers by ethernet between this G4 and another, I'm once again having the same issue with this machine and another MDD. (both using 10.4.11)
I connect the two macs with an ethernet cable
On the machine I want to copy files to, I go to the Go Menu/Connect to...
I select the network volume, mount it and then drag the file to the hard drive...
It starts copying, but very slowly - 1 GB would take 2-3 hours !
I followed some online help and configured the Network so that Appletalk is on
I'm Using DHCP with IP address and subnet mask indicated in fields
Location is Automatic
In Sharing - Personal File Sharing is on and checked (when restarting, the Internet tab Share your connection from: pop up selection reverts to AirPort)
In Internet - Share connection from Built In Ethernet is selected.
For what it's worth, Built-in Ethernet status under Network Status has a yellow button, not green, like AirPort. Shouldn't it be green? how?
I'm totally in the dark - why can't Apple make this simpler?
Any help very much appreciated...No, it just gets worse - I tried to follow that - as well as the support doc advice - then I get a pull down in Network saying changes have been made by another application - keeps doing that until I have to quit Sys. prefs. Going to the Sharing and the Internet tab, I select share your connection from airport, and it stops doing it...but I'm still getting snailpace file exchange . Am I the only Mac user on the planet with this problem - feels like it...am now spending 3 or 4th hour trying to solve...going around in circles?
BD: I made a New Location, as directed...and on both computers, too...changing configurations is scary because I didn't write down what I had before...and everything could get mixed up now. 11 years with Macs and I still have what seem like Problems 101.
Internet Sharing is off.
Don't know what 100 BaseTX or Gige - or where to find out.
Seems as if my only recourse is to dump files to an external hd and reload into 2nd computer...drat! Don't want to have to rely on that alone - or target disc mode...
After I tried to set a new location it didn't seem to get me anywhere - so I set Location to Automatic - since the KB article said that would automatically find the right path to built-in ethernet (I think, though I'm probably misunderstanding) Also, I getting into that downward spiral where everything seems to get increasingly hopeless...not rational, but real nonetheless. Any help appreciated, though you've given me a lot of your time and patience already...
Oh, another thing - I tried reversing the situation - attempting to access files from the one I tried to get files to at first - to the one I was trying to get files from - I'm able to connect, but it won't open up - only spinning ball and 'connecting' box...and then after 5 mns, it disconnects. Problem there too now...see what I mean?
Would it help if I listed what settings are presently on both computers? Then perhaps you could advise as to what needs to be reset....thanks -
How to test a simple PL SQL function from another PL SQL script
Hi,
I have created a function. Now i need to test that whether it is returning the correct values or not.
For that, i have written anothe pl sql script and trying to call this function. Im passing all the IN parameters in that function. I assume here that OUT parameters will provide me the result. Im trying to display the OUT parameter one by one to see my result.
I'm using toad as sql client here connected with oracle.
pl sql script:-
DECLARE
BEGIN
DBMS_OUTPUT.PUT_LINE('$$$$$$$ VINOD KUMAR NAIR $$$$$$$');
FETCH_ORDER_PRODUCT_DATA(320171302, 1006, 6999,
ODNumber OUT VARCHAR2, Line_Number OUT VARCHAR2,
ServiceID OUT VARCHAR2, BilltoNumber OUT VARCHAR2,
AnnualPrice OUT NUMBER, CoverageCode OUT VARCHAR2)
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ODNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | Line_Number );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | ServiceID );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | BilltoNumber );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | AnnualPrice );
DBMS_OUTPUT.PUT_LINE('HERE IS THE RESULT ' | CoverageCode );
END;
Function:-
Program Name : SPOT_Order_Product_Data_For_CFS.sql
Description : Function to Validate parameters from CFS
By : Vinod Kumar
Date : 08/19/2011
Modification History
By When TAR Description
CREATE OR REPLACE FUNCTION FETCH_ORDER_PRODUCT_DATA(orderNumber IN VARCHAR2, customerNumber IN VARCHAR2,
productLine IN VARCHAR2, ODNumber OUT VARCHAR2,
Line_Number OUT VARCHAR2, ServiceID OUT VARCHAR2,
BilltoNumber OUT VARCHAR2, AnnualPrice OUT NUMBER,
CoverageCode OUT VARCHAR2)
RETURN VARCHAR2 IS
lv_err_msg VARCHAR2(100) := '';
lv_bucket_id VARCHAR2(14);
lv_bill_number VARCHAR2(30);
lv_anual_price NUMBER;
lv_coverage_code VARCHAR2(8);
lv_quote_num NUMBER(10) := NULL;
lv_line_num NUMBER(5) := 0;
lv_customer_number VARCHAR2(30) := customerNumber;
lv_product_id VARCHAR2(14) := productLine;
lv_count_quote NUMBER := 0;
lv_quote_status VARCHAR2(5);
lv_quote_version NUMBER(2):=0;
BEGIN
IF INSTR(orderNumber, '-') = 0 THEN
lv_quote_num := orderNumber;
ELSE
lv_quote_num := SPT_Delimiter(orderNumber, 1, '-');
lv_line_num := SPT_Delimiter(orderNumber, 2, '-');
END IF;
--Check status of the quote COM, APP
SELECT COUNT(*) INTO lv_count_quote FROM sot_order_header WHERE ORDER_NUMBER=lv_quote_num
AND ORDER_STATUS IN ('APP', 'COM') AND CUSTOMER_NUMBER = lv_customer_number;
IF lv_count_quote = 0 THEN
lv_err_msg := 'Invalid Order number';
RETURN lv_err_msg;
END IF;
-- Fetch the latest version on SPOT quote
SELECT MAX(VERSION_NUMBER) INTO lv_quote_version FROM SPT_QUOTE_HEADER WHERE QUOTE_NUMBER = lv_quote_num
AND CUSTOMER_NUMBER = lv_customer_number;
-- If quote is valid fetch the data in OUT parameters
IF lv_line_num = 0 THEN
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.LINE_NUMBER, b.BUCKET_ID,
b.ANNUAL_REF_RATE_USD, b.COVERAGE_CODE
INTO lv_bill_number,lv_line_num,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple PIDs existing in the SPOT order, please provide the SPOT order + line number as input data';
RETURN lv_err_msg;
END;
ELSE
BEGIN
SELECT a.CUSTOMER_BILLTO_NUMBER,
b.BUCKET_ID, b.ANNUAL_REF_RATE_USD,
b.COVERAGE_CODE
INTO lv_bill_number,lv_bucket_id,lv_anual_price,lv_coverage_code
FROM SPT_QUOTE_HEADER a, SPT_QUOTE_LINE b
WHERE a.QUOTE_NUMBER = lv_quote_num
AND a.CUSTOMER_NUMBER = lv_customer_number
AND a.VERSION_NUMBER = lv_quote_version
AND a.QUOTE_NUMBER = b.QUOTE_NUMBER
AND a.VERSION_NUMBER = b.VERSION_NUMBER
AND b.PRODUCT_ID = lv_product_id
AND b.LINE_NUMBER = lv_line_num;
ODNumber := lv_quote_num;
BilltoNumber := lv_bill_number;
Line_Number := lv_line_num;
ServiceID := lv_bucket_id;
AnnualPrice := lv_anual_price;
CoverageCode := lv_coverage_code;
RETURN '';
EXCEPTION WHEN OTHERS THEN
lv_err_msg := 'Multiple SPOT lines exist with same parameter';
RETURN lv_err_msg;
END;
END IF;
EXCEPTION
WHEN OTHERS THEN
lv_err_msg := '@@@ EXCEPTION THROWN @@@ '|| SUBSTR(SQLERRM,1,120);
RETURN lv_err_msg ;
END;
Don't look at the function, it might have errors but my primary concern is how to test this function. Once I start doing its testing then only i can understand any bugs(if any).
My pl sql is not so good. Im still learning. I don't understand IN and OUT parameters are.
I just know that IN parameters r those whick we pass in to the function wen we call it and OUT parameters are those through which we get the result.
Thanks in advance
Vinod Kumar Nair20100511 wrote:
I wondered how I could test the output of the function from within TOAD?I usually create the following function in my developer schema:
create or replace function BoolToChar( b boolean ) return varchar2 is
begin
if b then
return( 'TRUE' );
else
return( 'FALSE' );
end if;
end;To test a function like yours, the following will do in SQL*Plus/TOAD/etc:
begin
DBMS_OUTPUT.put_line(
BoolToChar( XCCC_PO_APPROVALLIST_S1.does_cpa_exist(1017934) )
end;
I'm probably doing 101 things wrong here, but thought I'd ask anyway and risk being shouted at.Shout at? You reckon? I thought people risked being beaten with a lead pipe, or pelted with beer cans and stale pretzels - which makes being shouted at a really safe and viable alternative. {noformat};-){noformat} -
How to test the migrated workflows in SharePoint 2013
Hi, we are migrated the portal from SharePoint (Moss) 2007 to SharePoint 2013 using Doc Ave tool.
Now my concern is how to test all (OOTB and SharePoint Designer) workflows are working properly in SharePoint 2013.
How to approach? Any ideas/help will be appreciated.Hi Ashok,
Have the business users that use them or the folks that created them test them in the DEV environment prior to the PRD migration...
-Ivan -
How do I get built in apps like the App Store back
How do I get built in apps like the App Store back
Note: Pre-Installed iOS Apps cannot be Deleted
Check in Restrictions... Settings > General > Restrictions
Understanding Restrictions > http://support.apple.com/kb/HT4213
2) Check in All Folders and on All Pages/Screens...
3) If no joy... Settings > General > Reset > Reset Home Screen
Maybe you are looking for
-
Transfer video from a non digital camcorder
Wondering if there is any way to transfer video from my Hi8 camcorder to the Mac?
-
How can I increase subtitle font size in Apple TV?
I'm watching HD movies through Netflix and the subtitle font is very small. I need to increase the size. How?
-
Photoshop CC is a Memory Hog ... I have 4GB and PS CC is the only thing open my ram drops to like 895mb free...
-
Is it possible to create a custom web app for online quotes?
is it possible to create a custom web app for online quotes? Any advise greatly appreciated.
-
Downloaded a file from safari on iphone 4 and now can't find it
Help please?