How to test system down in XI? Kindly help!

Hi Experts,
    I have a JMS -> XI ->SAP R/3 scenario.
    If the remote SAP R/3 is down then I have to trigger an alert.
    In the runtime workbench, i have configured the alert in Alert Configuration.
    In this I have given the alert category, receiver service, interface and namespace.
    How do I test the system down scenario without actually making the system down?
I have tried to test it via runtime workbench test tool and stopping the receiver communication channel. But SXMB_MONI shows the message successfully processed.
   Why the XI message is not in error?
   How do I actually test this scenario?
   Kindly help me!
Thanks
Gopal

> 1. The report RSARFCEX to restart this message from
> SM58.
Correct.
> 2. Executing report RSQIWKEX restarts errored msg in
> SXMB_MONI.
It restarts the error messge from the Queue in SM58. If the message is deleivered successfully from Sm58, the message in MONI gets updated. It does not restart the message from MONI.
> 3. Msgs are processed in tRFC queues only in IDOC
> scenarios.
Ths blog has answers ,
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
<i>Further in asynchronous communication, the calls can be executed either by tRFC (Transactional RFC) or qRFC (Queue RFC). In tRFC, RFC calls are stored in database along with corresponding data under a unique transaction id (TID). However in tRFC, LUW (Logical Unit of Work) are executed independently of each other and the sequence specified by sending application is not maintained. And this particular requirement leads to qRFC communication wherein all LUWs are processed in the same sequence as determined by sending application.</i>
Not only Idoc's used by other Interfaces as well.
Regards
Bhavesh

Similar Messages

How to test System Alias

Hello,
How can I test a R3 system alias?
- System Landscape Cockpit did not bring any results.
- Support Desk >> SAP application requires transaction.
Is there an easier way?
Regards,
AAAttar

Thanks Senthil for the details,
We are on EP6 SP2 at this point. Standalone (DEV) portal installation, and SAP Dedicated system (not Load-Balanced, ie No message server). I've create a test system to SAP_BW, with WAS info. When I tried to test the system in Landscape Cockpit, (selected the test SAP_BW system and JCO) I got NO results. I hope I'm not missing a thing.
Few hours later, I created SAP role trasfer iview for testing, and this is what I got for this SAP_BW Alias:
[The installed version of the portal plug-in must be 6.0 or higher], pretty obvious!
For the other system I got, [Connect to SAP gateway failed Connect_PM GWHOST=http://FQN.com:3200, GWSERV=sapgw00, ASHOST=http://FQN.com:3200, SYSNR=00 LOCATION    CPIC (TCP/IP) on local host ERROR       hostname 'http://FQN.com:3200' unknown TIME        Sat Dec 4 17:03:39 2004 RELEASE     620 COMPONENT   NI (network interface) VERSION     36 RC          -2 MODULE      nixxi_r_mt.c LINE        2225 DETAIL      NiIHostToAddr COUNTER     6]
in my server: etc/services file:
sapdp00      3200/tcp        # SAP System Dispatcher Port
sapdp00s        4700/tcp        # SAP System Dispatcher Security Port
sapgw00      3300/tcp        # SAP System Gateway Central Instance Port
Regards,
AAAttar
Message was edited by: Aater Attar

What does Adapter engine pick from system landscape directory? Kindly help!

Hi experts,
What does Adapter engine pickup from system landscape directory? In other words, what data adapter engine need from SLD?
Kindly give examples.
Thanks
Gopal

Hi,
To add, Integration server picks the URL of the various Adapter Engines form SLD and caches it in AE Cache(You can view the Cached URL in SXI_Cache).
In SLD u can go to Content Maintanence and check the Adapter FrameWork Instance and get the URL for the AE's for Secure and non-secure communication.
Regards,
Sudharshan

How to test if remote R/3 system (Receiver) is down in case of Async RFC ?

Hi Experts,
How to test if remote R/3 system (Receiver) is down in case of Async RFC call? There is no BPM as well. I have configured an alert category and created a rule in runtime workbench's Alert Configuration for the specific inbound interface.
I have tried by stopping the channel and also by changing the server name in the communication channel but all in vail. XI still shows message successfully processed.
Kindly help me
Thanks
Gopal

Hi,
How to test system down in XI? Kindly help!
Have answered here as well.
Meanwhile, you would have an error in the receiver RFC adapter in Comm Channel Monitoring.
Maybe you change another RFC adapter rather than the one being used in the receiver agreement.
regards
Bhavesh

How to test exit EXIT_SAPLEINM_018

Hi Experts ,
I have made some changes for documentation.EXIT_SAPLEINM_018 which is related to any purchasing document
but i don't know how to test it.
can any one pls help me how to test it ?
answer will be rewarded
regards

Put session break-point in the enhancement, Run the transaction to test the functionality.
Regards
Vinod

My MacBook has been "moving to trash" 4 items for a LONG time now. I can't force quit this or stop it in any way. Does anyone know how I can get this to stop, I'm pretty sure its slowing my whole system down because it is constantly working on this.

"Moving Items to Trash" has been up on my desktop for days now. I don't know who to get rid of this and believe its slowing my WHOLE system down. Does anyone know how I can get rid of this, cancel it, forece quit, or anything? HELP!

Try force quitting
Press Command + Option + Esc

How can I handle deploying multiple test systems on the same PC that have been developed using different versions of LabVIEW, TestStand, and/or Switch Executive?

The major issue here is that the test systems must be documented and validated before being released to the production floor. Given this if a test station has multiple test systems deployed on it that have been developed on various versions of LV, TS, and Switch exec how can I force the test system selected to use the correct versions of TS, LV, and Switch exec.? I understand that the solution would be to recomplie everything and bring them up to the latest version but that would then require re-validation according to the QA department. Any advice would be greatly appreciated.
It would be nice if theTS deployment was more like an LV executable... meaning when a LV executable is launched it always knows what LV runtime engine to use when there are multiple engines installed on a PC.

Hi,
Multiply versions of teststand can reside on the same system, but only one version can run at a time. They is a utility that has to be run to set the active version.
The SequenceFiles have a version number, and you will find an error will be generate if you try to Load the sequencefile in the wrong version of TestStand.
The labview VIs will only work providing the correct version of the RTE is also installed on your system, even a labview executabe requires the correct RTE to be installed, either as part of the executable installation or as a seperate installation, before the labview exe will work correctly.
I'm not fimilar with the Switch exec but I would expect that it will also require the correct lower level device drivers to be available for the version you are using.
Therefore, as you are indicating that some of your system are at a older version, its difficult to image how you could achive this, considering if you say you have different versions of the software(s). For a start, you may have the problem that newer code/ sequencefiles using additional functionatily not available in the older versions.
I would think your only solution would be to have different deployments covering the different versions you have, or at least bring all your test systems up to the same version of teststand.
Regards
Ray Farmer
Regards
Ray Farmer

How to setup a BW test system?

Hi
We are having R/3 and now we are planning to install BW. Now a few questions are coming to us like...
1. In what cases we need a test system? Can we bypass test system and have development and productive system only?
2. How to setup a test system? Should we reload data from R/3 test system or can it be sourced from BW Productive system (in order to get more historical data)?
3. Has anybody setup a test system and loaded data from BW Productive system before?
Any suggestions will be highly appreciated.
Regards,
Pundit

Hi Arjun,
It is depends on client, for eg:say if client follows Sixsigma processes, then give much importance on Quality. So in this scenario it becomes much clear to have Quality box, If for other clients who don't have much Quality processes in place. you can take up the Quality (test) in Development box itself.
And it also depends on data you want have test on. For some clients they move much of their historical data for testing purpose..
Also some clients mainatain all 3 boxes(Dev,QA & Prod.)in sink..so that it would be easy for any changes or whatsoever.
Hope this helps...
Best Regards,
DMK
*Assign points if it helps...

How do CVI7.0 runtime engine and TestStand3.0 runtime engine work in a test system?

I developed code modules from CVI 7.0, and test sequence from TestStand 3.0. Now I want to deploy all to a test system. Should I create distribution kits for CVI and TestStand, and install to a target PC? Do each kit include the RTE? How do the runtime engine work in a system?

hp7550,
I saw your post earlier entitled "what is a run-time engine?". It looks like this post is addressing the same issue.
To answer your questions, it is not necessary to create a distribution kit for your CVI code modules. You can simply install the CVI Run-time Engine, which you can find if you go to www.ni.com and click on the Drivers and Updates link on the left-hand side.
Then you will need to deploy your TestStand system using Tools >> Deploy TestStand System in the Sequence Editor. That tool will go out and gather all the CVI code modules your sequence calls - unless you are calling a DLL or something dynamically inside of a code module; in which case, you need to add that dynamically called DLL (or code module) to your TestStand workspace.
To install the TestStand Run-time Engine, make sure the Install TestStand Engine option is checked on the Installer Options tab of the deployment utility. You can customize what gets installed with the engine by clicking on the Engine Options.
For more information on deployment, see Chapter 14 of the TestStand Reference manual (Help >> Search the TestStand Bookshelf...).
To answer your last question a run-time engine simply gives you access to the compiled code that corresponds to the functions you used from the CVI or TestStand libraries during development.
I hope that helps.
Best Regards,
Matt P.
Applications Engineer
National Instruments

How to transport the DATABASE TABLE into the Test system ?

Hi Experts,
I am working on BI7, I had created Database table in BDV system using SE11. Tech_name is ZGLACC_TEMP. I had activated it. I had used this database table for the purpose of writing the start routine in the transformation. while I am transporting the transformations to the test system, It is showing as syntax error in ABAP program,
In BDV system there are no syntax errors. it is working fine,
So now I have to transport the database table to test system so that I can transport the transformations into Test system without any error.
Kindly anyone can give the answer , it will be appreciate and points will be assigned.
thanks
sekhar

Hi Sekhar,
Go to SE11, go into the change mode of your table and change the Object Directory entry (Goto -> Object Directory Entry) to some valid package (other than $tmp). Then it will ask for a transport request. Give a transport request and then I believe you know what to do with that transport.
Another thing to keep in mind ... transport all the data elements and domains you have created for this table. Change their Object Directory Entry and assign them to the same transport request.
Best regards,
Kazmi

How to instal/set UWL in order to test WF functionality also on test system

I am replacing colleague who is on hollydays.
I am pritty new in EP area. We have integrated ESS functionality with some approval workflows.
WF guy told me I have to maintain the UWL on test system as this one can not communicate with test backend system.
So far I created iviews with SAP transactions(and one with URL), page workset and a test role on an brand new system enironment consisting of an ides ecc on an freshly installed EP system.
On old test EP I am very confused (maybe because of ESS package). Other confusing thing is that on this EP system I can not add e.g an i.view(there I can not as "No templates to display. You are not assigned to any existing templates.").
So my question would be :
1.How to instal/set UWL (so that workflows can be tested on test environment i.e. old test system with ESS package in connection with backend
2.How could I get reed of "No templates to display. You are not assigned to any existing templates." message(espetially if this has any impact on qustion 1.)
Thank you in advance for your imout

few settings in java were wrong

Urgent:: How to transport customer exit from dev to test system?

Hi,
We have created a Customer exit in our development system in the $tmp package, and we want to transport it to our test system. Can you please tell us how to proceed on this. We are not able to change the package as our package is a development package and so does not start with Y or Z.
Best Regards,
Charu.

Your package is RSR right.. this is the package for the function group XRSR where in this user exit exists.
you need to have a separate development class either starting with Y or Z. If not, ask any developer or your sap basis team to create one for you. then you can assign this development class to your user exit.
To check this, go to SE38 - enter your program name ZXRSRU01, display, in the menu "goto", CHECK "object Directory entry", you should have this development class.
Hope this helps.
Shakeel.

How to deploy the application into Test system in NWDI

Hi ,all
i hava some problems about NWDI, Could you help me ?
I hava defined the test system in runtime system of NWDI .
As a general ,it must be deploy the application into test system for test before transport the CR, is it right?
if so , how can i do to deploy the application into test system before assembly?
regards.

Hi Zhijun,
Thank you for your repay.
You are welcome
After assembly , can i deploy the application into test system by CMS? mean that if it can be done not through CR?
Yes, you import the changes on the "Test" tab of the transport studio of the CMS webui. This will deploy the changes to Test (to the system you have specified in the runtime system configuration for this track)
and what is the benefit of Dev system and Con system
See the guide: http://help.sap.com/saphelp_nw70/helpdata/en/b6/e6b9fc9ec00f4ca4a0d3e0645e87b5/frameset.htm
Best Regards,
Ervin

How to configure Test System

Hello Guys,
I want to some guidelines to install and configure the SAP NWCE as Test System. Any link or documentation would be encouraged.
Regards,
Naeem

Hi Naeem,
The SCAfiles for the ESR comes along with the CE package, you need to deploy those SCA files on NWDS in order to access ESR which is a part of the CE installation process, though I undestand your point that it is not required unless you need ESR/SR. The NWDS accesses ESR and SR to deploy the EAR files for the service Interfaces created on ESR/SR on the Java server from where the services would be accessed in run time. I think you don't need the ESR/SR in the test system unless it would be used by the PI system as well (if you have one in your landscape), as NWDS accesses the ESR once to get the service interface and then deploy it on Java server. and the deploed EAR files can be transported to the Test environment. having said that, you should have ESR/SR in your landscape as you would like the DEV, QA, PRD systems in sync.
On your other question, NWDS accesses the ESR/SR to get the service interfaces and create ear files for the interfaces and deploy them on the Java server and used at runtime.
Hope it helps.

How to test the interfaces in XI ?

Hi ,
Our Xi system is being upgraded from 3.0 to 7.0. I was asked to test the interfaces once the upgradation is done. I am not sure how this testing is to be done and will there be aby test plan for this??
Can some one help me on this ??
Thanks in Advance,
Hemanthika

To test, you must have imported all your scenarios in to your new system.then couple of general tips,
1.testing can be done only after understanding the scenario.
For this, u refer to the integration scenario in ur design. so this shall give u an idea about all the systems involved in integration and how the data flowing is between them and what kind of systems they are?
2. For testdata, you might need of business or functional team as you cannot have any info on the file formats etc(depending on different scenarios invloved like R3, SOAP Databse etc)
these are only general tips. but u can refer to many of the trouble shooting guides already available blogs in sdn for any sought of inputs.But then, SDN is always there.
you can test/monitor ur results in RWB->component monitoring
also in sxmb_moni
thanks
kiran
Edited by: kiran dasari on Mar 17, 2008 4:44 PM

How to test system down in XI? Kindly help!

Similar Messages

Maybe you are looking for