How to test the firewall is opened for a internal server

should I use
ping -t <IP of the internal server> 36<nr>?
Thanks! Points!

Hi Jennifer
try to execute the following command from the shell prompt
tracert -d <Ip address for the internal server>
try to note down the IP address where the packets are not transferring to other hops
ask your network person to resolve the IP to pass the packet to next hop
if your tracert session has been ended with all resolved IPs
then try to telnet <IP address for the Internal server> 36<nr>
if not, then Firewall has been blocking you, or Portal not yet configured proper.
REgards
Anwer Waseem

Similar Messages

How to get the NameTab Structure(X031L) for Dynamic internal table?

when we pass standard table to the FM 'DD_GET_NAMETAB' we will get the
nametab structure(x031l), like this i want to get the same structure for
dynamic internal table . how can I achieve this
please help me...

Hi,
try this method
REPORT zmaschl_create_data_dynamic .
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
 is_fcat LIKE LINE OF it_fcat.
DATA: it_fieldcat TYPE lvc_t_fcat,
 is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data.
DATA: new_line TYPE REF TO data.
FIELD-SYMBOLS: <l_table> TYPE ANY TABLE,
 <l_line> TYPE ANY,
 <l_field> TYPE ANY.
Build fieldcat
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE' EXPORTING i_structure_name = 'SYST' CHANGING ct_fieldcat = it_fcat[]. LOOP AT it_fcat INTO is_fcat WHERE NOT reptext_ddic IS initial. MOVE-CORRESPONDING is_fcat TO is_fieldcat. is_fieldcat-fieldname = is_fcat-fieldname. is_fieldcat-ref_field = is_fcat-fieldname. is_fieldcat-ref_table = is_fcat-ref_tabname. APPEND is_fieldcat TO it_fieldcat. ENDLOOP.
Create a new Table
CALL METHOD cl_alv_table_create=>create_dynamic_table EXPORTING it_fieldcatalog = it_fieldcat IMPORTING ep_table = new_table.
Create a new Line with the same structure of the table.
ASSIGN new_table->* TO <l_table>.CREATE DATA new_line LIKE LINE OF <l_table>.ASSIGN new_line->* TO <l_line>.
Test it...
 DO 30 TIMES.
 ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
 <l_field> = sy-index.
 INSERT <l_line> INTO TABLE <l_table>.
 ENDDO.
 LOOP AT <l_table> ASSIGNING <l_line>.
 ASSIGN COMPONENT 'SUBRC' OF STRUCTURE <l_line> TO <l_field>.
 WRITE <l_field>.
 ENDLOOP.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

How to test the rule if multiline container is passing to the task?

Hi Experts,
                  I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
Is it possible to test the rule independently if I use multiline container as import parameter in my rule? If so can anybody please tell me how to test the rule?
Thank You.
Srija.

Hi Pavan,
                 Thank you.
                 To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
Thank you.
Srija

How to create the change document functionality for a dependent objects?

May I please know how to create the change document functionality for a dependent objects?
I have done it follow the same process as for business process objects. But when i try to test it in BOBT, there is no records under "FIELD_CHANGE_WITH_FILTER". It seems the change hasn't been recorded.
If the way I did to create change document for dependent object is correct, please also kindly advise the possibilities for why there is no record during testing.
thanks in advance.

I also have some doubts about the business object.In this case,one abstract BO hase a subnode wihich is root extended.I added the change document for this node under the category "root_extended" and then tested the function in BOBT.I got some error message "can't find the root key".Shall i redefine the method /BOFU/IF_CDO_CREATION~IS_CDO_CREATION_ACTIVE so as to solve the problem?
Thx.

How to test the PMS/apprisal template

Hi experts,
We have completed the configuration of Apprisal templete.
With OOHAP_BASIC,PHAP_CATALOG_PA we have completed the process along with status and substatus,staus flow.
I struckup at this juncture.
How to test the entire process after the configuration.
Please advice.
Regards,
Sairam.

Hi Sairam,
To test the PMS process, please follow the below steps :
1. Go to PHAP_CREATE_PA and select your template. Enter the details for appraisee, appraiser, reviewer ( if applicable ) and also the start date and end date. Save the document.
2. Go to PHAP_ADMIN_PA and select the template/appraisee id in the appraisee column in the selection screen and execute. Select your appraisal document and then select from Menu- Appraisal Document->Change Status and select your initial status and sub status.
Now you can login to Portal/R3 with the user and start testing. The substatus will move automatically based on your workflow. Once you complete a particular status say 'In Planning' you need to manually change the status again from PHAP_ADMIN_PA to 'In Review'.
Get back to me in case of any queries.
Regards,
Sachin

How to test the connection between DSD backend and DSD connector

Dear all,
I am configuring the MDSD scenario .. and i want to insure that my customization is correct
How to test the connection between DSD Backend and DSD connector ??

Hi Viren,
The problem is:
We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
Thanks,
RPK.

How to test the modified script (Global Dunning)

Hi all,
I have a requirement in SAP Script.
I had modified Global Dunning Letter F150_DUNN_01 and the print program is SAPF150D2.
Transaction code is F150.
How to test the script and what is the access path for checking print preview of the modified form.
Do i need to configure anything before testing.
Rewards to all.
Thanks & Regards,
Aarthi.

Hi
Your functional consultant will help you to trigger the output of this dunning output
or search in SPRO tcode
o in the related tcode F150
Reward points for useful Answers
Regards
Anji

How to test the data

Hi,,
The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
Can you please help me how to test the data? and prepare the unit test case.
1. Intra-plant movement of inventory between two plants with the same region Code - In India there are two plants in the state of Maharashtra.
Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002231 / ZU PO 4600000500
2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
NB PO# 6500002232 / ZU PO 4600000501
3. Intra-plant movement of inventory between two Parts plants.
Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
NB PO# 6500002233 / ZU PO 4600000502

Please go thorugh this ...
eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script.
By using eCATT we can do following operations,
·        Test transactions, reports, and scenarios
·        Call BAPIs and function modules
·        Test remote systems
·        Check authorizations (user profiles)
·        Test updates (database, applications, GUI)
·        Test the effect of changes to customizing settings
·        Check system messages
For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
To develop a test script in eCATT we need to follow the following steps,
1. Creating Test Scripts.
2. Creating Test Data Containers[16] .
3. Understanding System Data Containers[17] .
4. Executing Test Configurations.
There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
For details and the screenshots     please see the link
http://www.erpgenie.com/sap/ecatt/
Reward points if it is usefull ...
Girish

How to Test the individualmapping field and conditions...

Hi Frnds,
I done mapping from source to destination as per tech spec in my scenario based on some conditions
i used node functions also..
But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
Regards,
Raj

Hi
If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
Regards
Sami
Reward points if useful.

How to test the performed SAP SCRIPT

Hi friends can any one help for
how to test the performed SAP SCRIPT. What are the necessary codes or anything else for performing it

Praveen,
Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
Regards,
Vinod.

How to test the UDA or Attribute of an ancestor member

Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...

You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.

How to test the adapters

hi
anybody can tell me how to test the adaptors?
regards,
krushi

Adapter Monitoring:
Steps:
1. Go to RWB.
2. In the Component Monitoring Select Adapter Engine
3. Select the Adapter Monitoring Tab.
Using this window u cam monitor
>> Installed and Started Adapters
>> Adapters with Error and
>> All the Adapters
Uses:
>>The name of the server on which the selected Adapter Engine was deployed. This can be a server cluster consisting of several nodes.
>>The namespace in which the adapters shipped by SAP are located. If you have created additional namespaces for your own developments or for third-party adapters, these are also displayed.
>>A list of all the adapters available for the selected Adapter Engine. Adapters that are not installed and started, or not registered with the Adapter Framework are GRAYED out. You can select all the other adapters to display additional information. i.e U can see all the Adapters.
If all the adapters are working then it will be displayed in GREEN.
If not then it will be displayed in RED.
If U are not using the adapters in ur scenarios then it will be GRAYED out.
Remember to set the thread to solved when you have received a solution
Use a Good Subject Line, One Question Per Posting - Award Points

How to test the firewall is opened for a internal server

Similar Messages

Maybe you are looking for