How to test the layouts in multiple client environment

asap.

Thanks for your reply Mike.  Unfortunately, that OSS note seemed to be directed at an ABAP + Java Add-in install.  We have a Java only install.  We ended up installing the SCS on a shared cluster drive, which seems to be working and failing over correctly.  However, I am still not completely comfortable that this is the best way to install the SCS in a failover environment.

Similar Messages

  • How to test the connection between DSD backend and DSD connector

    Dear all,
    I am configuring the MDSD scenario .. and i want to insure that my customization is correct
    How to test the connection between DSD Backend and DSD connector ??

    Hi Viren,
    The problem is:
    We have a new BW system. The basis people asked me to check the connection between this BW system and the R/3. There is only one client for now(100). I have logged into 100 and tried executing RSA1 to check the connection, but it gave a message box saying "You can only work in Client 000". Then I have treid logging into 000(just to make sure) and tried executing RSA1. Even here I got a message saying "The SAP BW system must not be operated in client 000". Now, I am not sure of what is wrong in clien 100. I am not sure if I have to do some settings before I access RSA1 or any other BW transaction. Could you please help me in this.
    Also, I just checked the RFC destinations in BW. There is a destination created for our R/3 and I have noticed that they have given a remote UserID and password for remote login. I tried to check the Remote UserID in SU01 but there is no userID with that name. Could this be a problem?
    Thanks,
    RPK.

  • How to test the B2B scenario ?

    How to test the B2B scenario ?
    Because the client may not give permition to test, then i heard  one thing in RWB we can test the data, how and where we can test the data ?

    Venkat,
    Follow the below procedure.
    Go to RWB, choose Component Monitoring , click Click Display
    Expand Integration Server node -Click Integration Engine .
    In the bottom of the page go to TestMessage tab.
    In the Service/Interface/InterfaceNamespace enter the Sender Service & Outbound Interface details
    Enter your username & pwd and choose the qos.
    Paste the payload in the payload area.
    Now click SendMessage .
    Done!
    raj.

  • How does create a server with multiple Clients ?

    Any people can lead me .
    How does create a server with multiple Clients ?
    Thanks

    For a multithreaded server you will need a thread to listen and at least one thread per client. If the conversation is half duplex, one thread per client works very well, if it's full duplex you will find one thread to send and one to receive much easier to program.
    I posted a Simple Socket Server that uses 1+2*clients threads.

  • How to get the data from multiple nodes to one table

    Hi All,
    How to get the data from multiple nodes to one table.examples nodes are like  A B C D E relation also maintained
    Regards,
    Indra

    HI Indra,
    From Node A, get the values of the attributes as
    lo_NodeA->GET_STATIC_ATTRIBUTES(  IMPORTING STATIC_ATTRIBUTES = ls_attributesA  ).
    Similarily get all the node values from B, C, D and E.
    Finally append all your ls records to the table.
    Hope you are clear.
    BR,
    RAM.

  • How to test the payload in XI

    Hi all,
    could please explain how to test the payload in xi and with steps.
    Thanks in advance,
    Radhika

    Hi Radhika,
    You can test in three ways.
    1.)  In message mapping directly give the relevant data and then execute.  Here you can test whether the mapping is correct or not.
    2.)  In Integrstion Directory after completing and activating  the Configuration,  in tool you can find the Test Configuration tab. There you can give the sender and receiver details along with payload. Here you can test whether the Configuration is correct or not.
    3.)  In RWB in COmponent monitoring.  Select the Integration Engine Monitoring. Here give the sender and receiver details, Interface name, name space, Quality of service.
    Now give user name and pass word.
    Paste the payload from massage mapping and then press test tab.  Here yoyu can directly send the message from XI server to the receiver system.
    Ok,
    Jeevan

  • How to test the rule if multiline container is passing to the task?

    Hi Experts,
                      I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
    ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
    In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
    Is it possible to test the rule independently if I use multiline container as import parameter in my rule?  If so can anybody please tell me how to test the rule?
    Thank You.
    Srija.

    Hi Pavan,
                     Thank you.
                     To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
    I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
    Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
    Thank you.
    Srija

  • How to change the layout of a category view

    I don't know how to change the layout of a category. I want to put 3 image's behind each other followed by some text, like a table with 4 columns. Instead of puting then in 4 rows

    larsprevo
    The category 'view' of items/folders uses the default style of the content area it is defined in (shared categories use the default shared style). Edit the default style to change the font/color of the items/folders returned within the category 'view'. Unfortunately, you don't have the ability to control the layout(like folder regions) - they always display in rows.
    Added an enhancement request for a feature that would allow you to control the display of items/folders in a category/perspective: 1828423

  • How to create the above Fiscal period & Client Calender

    Hi All,
    I want to create Client Factory Calendar in BI System.
    Source is MS SQL DB(UD Connect) not ECC.
    I got the below information from the Business Group:
    For the moment we need to implement the Client Calendar. So periods should be according to Client Fiscal Periods. We do not need to implement public holidays, as they donu2019t affect periods.
    Client periods always contain complete weeks, starting Monday, finishing Sunday. Periods contain the following number of weeks: 5-4-4-5-4-4-5-4-4-5-4-4.
    Please calsri fy the below:
    >> Holiday calender is not required. but w/o holiday calender how we can define Factory calendor? Is it possible?
    >> How to define the fisacl periods?.
    >> When can we use these fiscal periods in the Factory Calender?.
    Please provide me step wise procedures..how to create the above Fiscal periods & Client Calender.
    Thanks in advance,
    Sri.

    hi siri.
    please go though these links
    calendar
    difference b/n Factory Calendar and Public Holiday Calendar
    hope this will help u.
    thanks

  • How to test the PMS/apprisal template

    Hi experts,
    We have completed the configuration of Apprisal templete.
    With OOHAP_BASIC,PHAP_CATALOG_PA we have completed the process along with status and substatus,staus flow.
    I struckup at this juncture.
    How to test the entire process after the configuration.
    Please advice.
    Regards,
    Sairam.

    Hi Sairam,
    To test the PMS process, please follow the below steps :
    1. Go to PHAP_CREATE_PA and select your template. Enter the details for appraisee, appraiser, reviewer ( if applicable ) and also the start date and end date. Save the document.
    2. Go to PHAP_ADMIN_PA and select the template/appraisee id in the appraisee column in the selection screen and execute. Select your appraisal document and then select from Menu- Appraisal Document->Change Status and select your initial status and sub status.
    Now you can login to Portal/R3 with the user and start testing. The substatus will move automatically based on your workflow. Once you complete a particular status say 'In Planning' you need to manually change the status again from PHAP_ADMIN_PA to 'In Review'.
    Get back to me in case of any queries.
    Regards,
    Sachin

  • How to test the modified script (Global Dunning)

    Hi all,
    I have a requirement in SAP Script.
    I had modified Global Dunning Letter F150_DUNN_01 and the print program is SAPF150D2.
    Transaction code is F150.
    How to test the script and what is the access path for checking print preview of the modified form.
    Do i need to configure anything before testing.
    Rewards to all.
    Thanks & Regards,
    Aarthi.

    Hi
    Your functional consultant will help you to trigger the output of this dunning output
    or search in SPRO tcode
    o in the related tcode F150
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to test the data

    Hi,,
    The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
    Can you please help me how to test the data? and prepare the unit test case.
    1. Intra-plant movement of inventory between two plants with the same region Code -  In India there are two plants in the state of Maharashtra.
    Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002231 / ZU PO 4600000500
    2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
    Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002232 / ZU PO 4600000501
    3. Intra-plant movement of inventory between two Parts plants.
    Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
    NB PO# 6500002233 / ZU PO 4600000502

    Please  go thorugh this  ...
    eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script. 
    By using eCATT we can do following operations,
    ·        Test transactions, reports, and scenarios
    ·        Call BAPIs and function modules
    ·        Test remote systems
    ·        Check authorizations (user profiles)
    ·        Test updates (database, applications, GUI)
    ·        Test the effect of changes to customizing settings
    ·        Check system messages
    For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
    Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
    To develop a test script in eCATT we need to follow the following steps,
    1. Creating Test Scripts.
    2. Creating Test Data Containers[16] .
    3. Understanding System Data Containers[17] .
    4. Executing Test Configurations.
    There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
    For  details  and the screenshots     please  see the  link
    http://www.erpgenie.com/sap/ecatt/
    Reward  points if it is  usefull ...
    Girish

  • How to Test the individualmapping field and conditions...

    Hi Frnds,
    I done mapping from source to destination as per tech spec in my scenario based on some conditions
    i used node functions also..
    But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
    Regards,
    Raj

    Hi
    If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
    Regards
    Sami
    Reward points if useful.

  • How to test the performed  SAP SCRIPT

    Hi friends can any one help for
    how to test the performed  SAP SCRIPT. What are the necessary codes or anything else for performing it

    Praveen,
    Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
    Regards,
    Vinod.

  • How to test the UDA or Attribute of an ancestor member

    Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...

    You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.

Maybe you are looking for

  • Unable To Open Financial Reporting Reports In PDF In EPM Workspace in 11.1.2.2

    Hi All,                We have FR 11.1.2.2 running on AIX and we recently apply a patch 11.1.2.2.303 to this FR 11.1.2.2. As a pre-req we have also apply the patches for HSS and workspace. Now after applying the patch we cannot open the reports in PD

  • Doubt in using SO_NEW_DOCUMENT_ATT_SEND_API1

    Im haveing a problem in this same FM. I want to send via e.mail the file attach of service object . I use the fm SO_DOCUMENT_READ_API1 to to read file. The problem is that I can not get the FM, I think I wrong to set some information, since sending i

  • Dualview on 2 external displays Satellite P100

    I just bought a Satellite P100 to replace my desktop computer expecting that since it has two external monitor outputs I could drive two external monitors simultaneously using DualView. It would appear that I can have either: Internal display + DVI c

  • Create a button in one component and use it in other component

    Hello, I have a problem(is not the first time but I don't have very clear that problem and I'm asking again). I'm creating a button in one component doing that Comp1: public var btn=Button; override public function main(args:IParams):void{      var b

  • Problem in starting eclipse

    At first I thought I messed up eclipse, so I deleted everything, re-installed eclipse and re-installed nitox. Everything worked fine until this morning. When I booted by system, and started eclipse I got the following errors: Errors during build. Err