How to test the LCD screen with digitzer removed?

I cracked my ipod touch screen. Could not see the display anymore and removed the digitizer and bezel. I can't tell if the LCD is working or not. Is there a way to test it? When connect to computer, it says USB device not recognized.

Have you tried putting your monitor to sleep via system preferences (set to one minute, theres no instant option )?

Similar Messages

How to display the selection screen with icons as well as with text element

How to display the selection screen with icons as well as with texts (written in text elements) for PlantDate, OrderType,WareHouse..

Report zex33.
type-pools: icon.
selection-screen begin of line.
selection-screen comment 1(20) text_001.
parameters: p_werks type marc-werks.
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_002.
parameters: p_whouse(10).
selection-screen end of line.
selection-screen begin of line.
selection-screen comment 1(20) text_003.
parameters: p_auart like vbak-auart.
selection-screen end of line.
initialization.
write ICON_PLANT as icon to text_001.
concatenate text_001 text-001 into text_001 separated by space.
write ICON_WAREHOUSE as icon to text_002.
concatenate text_002 text-002 into text_002 separated by space.
write ICON_ORDER as icon to text_003.
concatenate text_003 text-003 into text_003 separated by space.

HT4085 how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

how to lock the tauch screen with some password or dots like android to prevent misuse. And also screen lock to prevent interruption while watching movie reading books etc.

You can set a passcode to be requied to unlock the iPad via Settings > General > Passcode Lock. In terms of locking the actual screen whilst using an app, then that isn't currently possible, but with iOS 6 in the Autumn there will be a new 'accessibility' feature (from here) which will allow you :
... to limit an iOS device to one app by disabling the Home button, as well as restrict touch input on certain areas of the screen

How to display the variable screen with report in the same page together

our customers want to design a web application use BEx
they want the variable screen can be displayed with the report result in the same web page together
so they can modify the variable filters any time and refresh the report with new variable filter
i have tried the navigation area,but it seems only use new filter to the data athough get,we can't change the filter we input in the variable screen.
is there any way to display these together?
even I can use BSP.

I think to display var screen with the report is not possible.(At least it will not be static). You need to refresh the report and choose the varibale at that time.
Other option could be to bring all the possible value in the report and provide your user with the filter value. But this will make your report slow as you may have to bring more data in the filter.
Thanks...
Shambhu

HT5866 my screen on my 5C have crack n I need to replace the lcd screen with digitizer is this possible?

I need to replace my crack 5C screen, any help

If you are in the US, some Apple stores have the ability to replace a screen, some do not. If they can, the cost is only $149. If they cannot, then without Apple Care + you would need to purchase an out of warranty replacement at a cost of $269. If you do have Apple Care +. you can make 2 total exchanges over the 2 year life of Apple Care + with a $69 deductible.

How to use the external screen with mac book closed?

how to keep my macbook on when the screen is folded down?

thanks! have to have both mouse and keyboard? can i just have either one? do they have to be apple mouse or keyboard? can i still have it running without any usb things connected? (ie when i am just using it to connect to a TV for movie)

How much time an LCD screen can stay on and displaying images?

Suppose I'm rendering on the new '27 iMac, how much time the LCD screen can stay on and displaying the same image? (Like the desktop, or a very slow progress bar).
And, if there is a difference, how much time it can stay simply on and showing differents images?
I have to use a screen saver? (but it consume some power to the rendering) If yes, after how much time? And what kind of screen saver, simply black screen or somethig animated?
I have to turn off the display only? (but this can conflict with some particular software...) If yes, after how much time?
Thanks.

Suppose I'm rendering on the new '27 iMac, how much time the LCD screen can stay on and displaying the same image? (Like the desktop, or a very slow progress bar).
And, if there is a difference, how much time it can stay simply on and showing differents images?
I have to use a screen saver? (but it consume some power to the rendering) If yes, after how much time? And what kind of screen saver, simply black screen or somethig animated?
I have to turn off the display only? (but this can conflict with some particular software...) If yes, after how much time?
Thanks.

How to fill the whole screen of my iMac with the photos included in an iDVD project. (iDVD v. 7.1.2)

How to fill the whole screen of my iMac with the photos I included in an iDVD project. (iDVD v. 7.1.2). I mean, during playing the burned dvd.
When I do "Enter Full Screen", the slide show fills the screen but the photo itself remains in the middle with a wide black border filling the rest.
Any cure for this ?

Hi
In iDVD Preferences - Turn off - TV-Safe area - and the Photos will fill the full area with just letterboxing or pillars as max.
Then "Save as a DiskImage" and test this and see if this plays better - before burning DVDs that's not as You want them.
Bengt W

How do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

how do i fix error code 6A00 on the LCD screen of my Canon PIXMA MP810

Hello drews,
To try and resolve the 6A00 error, we will want to ensure that no paper jams or obstructions exist in the printer. To do this, please follow the steps below:
ASF / Paper Output Slot
Turn off the printer.
Remove paper from the ASF.
Gently pull the jammed paper out.
If paper is visible from the ASF, use both hands to pull the paper out slowly.
If paper is visible from the paper output slot, use both hands to pull the paper out slowly.
If the paper tears and a piece of that remains inside the printer, open the scanning unit (printer cover) and remove the paper from inside the printer.
Note : Be careful not to touch the components inside the printer.
Turn on the printer and confirm that the Alarm light is off.
(If the jammed paper remains in the printer, the paper may be automatically ejected.)
Load paper back into the ASF.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Paper jams inside the printer
Turn off the printer and disconnect the power cord and USB cable.
Remove the jammed paper slowly using the following procedure.
Open the rear cover to check if the paper is jammed.
Pull out the cassette and check if the paper is jammed inside the cassette area.
Stand the printer with the rear side down, holding the document cover.
Press the tabs together and pull the green cover toward you.
Check if the paper is jammed.
(If you were not doing Duplex printing, you do not have to follow this procedure.)
Close the green cover and place the printer back to a normal position.
Reconnect the power cord and power on the printer. Confirm the Alarm light is off.
Load paper back into the ASF or cassette.
Press <OK> to clear the message and continue printing. If you are printing from an application software, follow the instructions displayed on your computer.
Top
Clearing credit card-sized paper jammed inside the printer
Credit card-sized and 4" x 6" sized paper must be loaded properly. If this media is not loaded properly, it will feed into the printer and will not exit. Credit card-sized paper should only be loaded in the ASF and in portrait orientation. 4" x 6" sized paper can be loaded in the ASF or cassette. But must be loaded portrait orientation.
If credit card-sized paper was loaded in landscape orientation in the ASF and did not eject (exit), please follow this procedure.
Turn off the printer.
Load the same paper type that is jammed inside the printer in portrait orientation.
Power on the printer.
The paper stock in the ASF will automatically feed the jammed paper from the printer.
To resume printing, load the paper in portrait orientation.
If 4" x 6" sized paper was loaded in landscape orientation in the cassette and did not eject (exit), please follow this procedure.
Turn off the printer.
Open the rear cover.
Fold in four a piece of letter-sized plain paper.
Push in the folded paper until it hits the jammed paper.
If the jammed paper is visible from inside the printer area, pull it out and proceed to step 7.
If the jammed paper cannot be pulled out, push in the folder paper from the rear so the jammed paper is in between the feed rollers.
Pull out the folded paper and close the rear cover.
Power on the printer and confirm that the Alarm light is off. The jammed paper should automatically eject.
To resume printing, load the paper in portrait orientation.
If you still experience the same error after performing the steps above, please turn off the printer, unplug the power cord from the back and leave it out for at least 10 minutes, then plug it back in and turn it back on. If the error persists, unfortunately, the printer will require servicing to resolve the issue. Please click on the Contact Us link below to obtain your servicing options.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
Please help
Marcelo

If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
Gray, Blue or White screen at boot, w/spinner/progress bar
Also take this time to backup your users files off the machine if possible.
Most commonly used backup methods
Sometime that won't work and you need to do more
..Step by Step to fix your Mac

How can you tell if you need to just replace the glass on an ipod 4g or the glass and the LCD screen?

i just broke my ipod touch 4g about a month ago and i think it is just the glass but i am not sure. It cracked and the glass started falling out of the top right corner and today, the white part started cracking. is this just part of the glass or is it part of the LCD screen? I want to figure this out because i dont want to order a repair kit with an LCD screen if i dont have to. thanks in advanced

On the 4G the outer glass and the LCD screen is one bonded unit.
iPod Touch Repair – iFixit

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Im having trouble getting my macbook pro to boot up after a fail safe boot, im getting as far as the grey screen with the apple loggo. so im trying to run a disk repair but is saying the disk is locked, how do i unlock disk??

Some clarification may help.
You say you cannot boot normally. It shows a gray screen with the Apple logo.
Did you say it will boot successfully in Safe Mode (boot, then hold down the Shift key)?
How did you boot the machine to run Disk Utility? (Which keyboard combinations)?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

My Macbook aliminium unibody from late 2008 will not boot. I reach the grey screen with the apple icon and the spinning grey gear. I used disk utility to boot it but it said integrity test failed. I don't know what to do can anyone please help?

Sounds like you may have a harddrive issue. You are probably going to need to get that changed out and then install the OS X again to get it going.

MBP won't reboot past the white screen with the grey apple. Why? How do I fix it?

MBP won't reboot past the white screen with the grey apple. Why? How can I fix it?

Which OS are you on.
try doing an SMC reset http://support.apple.com/kb/HT3964
How long do you wait until giving up??

Anyone know how to get to the security screen with a " Crashed" phone?

Getting the message "Restore Needed" but it says I can't connect with my Iphone because my phone has a security code. I can't get to the Security code screen on the phone. Anyone know how to get to the security screen with a " Crashed" phone?

Restore the phone on the same computer it was last synced to and it will not require the unlock code.
If you don't have access to that computer you will have to use Recovery mode, which will wipe all content. See: http://support.apple.com/kb/HT1808

How to test the LCD screen with digitzer removed?

Similar Messages

Maybe you are looking for