How to test the replicatioin when we are upgrading to latest version

Hi,
We have 3 different servers for Australia, EMEA and North America in which oracle 8i(8.1.7.4) has been installed on all the servers.
Replication process has been set up on all the servers.
If we do any transactional operation on any of the servers that will get replicated in the remaining servers.
replication has been setup for few tables in the database.
Now I need to upgrade the database to 10g.
How the replication will get affected? Please advise me.
Regards,
RB

Are you planning to upgrade the databases 1 at a time? or do you plan to shut them all down and upgrade them all at the sametime?
if you do all at the sametime then you should be ok. If all databases are a 10g the replication should be fine and go on as it did in your 8.1.7.4 database.
If you do 1 at a time I would recommend testing, testing, testing. The reason is you are jumping from 8 to 10 in version. while the 10g client should be ok with this the 8i client might be an issue. Been a long time since I did anything with 8i but I am not sure I would trust the 8i client with a database link to 10g with replication until I tested it throughly just to be safe before I made any definate upgrade plans.

Similar Messages

  • How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.

    How do you save your photos in iPhoto and be able to find the photos when you are in different programs. When i try to find them I can only find the iPhotos not the individual photos.

    Use the media browser. In every open/attach window in tithe lower left hand corner under media ==> photos ==> iPhoto
    LN

  • How to calculate the salary of the employees when they are differentiated by monthly and hourly basis

    Hi all
    How to calculate the salary of the employees when they are differentiated by monthly and hourly basis
    How can we write the logic though sql
    Thanks in advance

    (case when pay_basis like 'HOURLY'
    then PROPOSED_SALARY_N*pay_annualization_factor
    when pay_basis like 'ANNUAL'
    then PROPOSED_SALARY_N*pay_annualization_factor
    end )
    I was actually trying to write the logic in this way but it was not calculating in correct format for hourly paid employees

  • How to test the PCI/PXI 4461

    when i receive a new card, how to test it?
    when i click the "self-test" in the Measurement & Automation Explorer,it shows that "the device has passed the self-test."
    is that means the card is ok?
    or i should make other test to confirm?what test should i do?

    You can also use the test panels in MAX to test each channel of input or output after they are terminated. This is a good verification that your signal conditioning, wiring, etc is working as expected before getting LV involved.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • How to test the adapters

    hi
    anybody can tell me how to test the adaptors?
    regards,
    krushi

    Adapter Monitoring:
    Steps:
    1. Go to RWB.
    2. In the Component Monitoring Select Adapter Engine
    3. Select the Adapter Monitoring Tab.
    Using this window u cam monitor
    >> Installed and Started Adapters
    >> Adapters with Error and
    >> All the Adapters
    Uses:
    >>The name of the server on which the selected Adapter Engine was deployed. This can be a server cluster consisting of several nodes.
    >>The namespace in which the adapters shipped by SAP are located. If you have created additional namespaces for your own developments or for third-party adapters, these are also displayed.
    >>A list of all the adapters available for the selected Adapter Engine. Adapters that are not installed and started, or not registered with the Adapter Framework are GRAYED out. You can select all the other adapters to display additional information. i.e U can see all the Adapters.
    If all the adapters are working then it will be displayed in GREEN.
    If not then it will be displayed in RED.
    If U are not using the adapters in ur scenarios then it will be GRAYED out.
    Remember to set the thread to solved when you have received a solution
    Use a Good Subject Line, One Question Per Posting - Award Points

  • How to test the select statement.

    Hi All,
    How to test the select statement.
    Is there any Oracle sqlplus  or toad kind of tool to  test the query.
    thanks
    siva

    Use SQL Trace (ST05) and choose 'Explain one SQL Request'. Enter your SQL command as it should be executed in the underlying database. e.g. if the db is Oracle, the statement should be entered as:
    SELECT matnr,werks,lvorm,dispo
    FROM marc
    WHERE mandt = :a AND
                 matnr = :b AND
                 werks = :c
    In the above :a, :b and :c are place holders for the actual comparison values. You dont have to enter those values. When you choose 'Explain' button, you will find the 'Execution Plan'. The important parameter which denotes the efficiency of the SQL statement is the 'Cost'. The cost should be as low as possible. The table access should be through INDEX UNIQUE SCAN. If you get a FULL TABLE SCAN and higher cost, you need to fine-tune your statement by modifying the where clause.
    If you dont know Oracle SQL statements, execute the program in trace mode and go to the trace and you will find the underlying SQL statements issued to the database.
    Regards
    Suresh Radhakrishnan

  • How to reload the screen when changing languages in JavaFX 2?

    I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
    Here is the start method to show the stage.
        @Override
        public void start(Stage stage) throws Exception
            this.stage = stage;
            Locale locale = Locale.getDefault();
            ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
            scene = new Scene(root);
            stage.setScene(scene);
            stage.show();
    here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
        public void refresh(ResourceBundle rb)
              //change the language here
    1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
    this.btnLabel.setText(rb.getString(key.test));
    2. I don't want to reload the scene,like following:
        public void refresh(ResourceBundle rb)
             try
                loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
                root = (Parent)loader.load();
                scene.setRoot(root);
                FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
                controller.setMain(this);
            catch(Exception err)
                err.printStackTrace();
    So do we have a solution to just set the resourceBundle and reload the scene easier?
    Thanks and best regards!

    Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
    Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
    Why don't you want to use option 2?
    Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that).  If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change.  Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

  • How to test the rule if multiline container is passing to the task?

    Hi Experts,
                      I am working on leave workflow. I have to get the approvers based on no of days of leave and leave type. I am getting these details in ITEMS_TAB internal table. I am passing this table to a rule. Now my problem is when I tried to simulate the rule I am not getting any input screen to enter the data.
    ITEMS_TAB is an internal table type of   "PTREQ_ITEMS_WF_TAB_FLAT".
    In the rule I have created a container by selecting the radiobutton "ABAP Dict. Data Type" and entered the above reference parameter is it right way?
    Is it possible to test the rule independently if I use multiline container as import parameter in my rule?  If so can anybody please tell me how to test the rule?
    Thank You.
    Srija.

    Hi Pavan,
                     Thank you.
                     To copy the values I am not getting any input screen to input the values. I observed one thing that the type that I am referring in the Rule is a deep structure. Is this is the reason that I am not getting the input screen to enter the values?
    I tested by creating aother rule by taking a field for that rule I am getting the input screen to simulate the Rule.
    Can you please suggest if the rule will not work then what I have to do? without the rule how can I get the agents?
    Thank you.
    Srija

  • How to test the data

    Hi,,
    The below test data is for SD report which do the monthly batch transfer from Annexure to F-form
    Can you please help me how to test the data? and prepare the unit test case.
    1. Intra-plant movement of inventory between two plants with the same region Code -  In India there are two plants in the state of Maharashtra.
    Plant 8600 (Vendor 10999346) -> Plant 8601 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002231 / ZU PO 4600000500
    2. Intra-plant movement of inventory from Plant 8650 - Goa to one Depot Plant
    Plant 8613 (Vendor 10999359) -> Plant 8618 - MM# 1003623 / 1013515 / 5214135 / 8788143
    NB PO# 6500002232 / ZU PO 4600000501
    3. Intra-plant movement of inventory between two Parts plants.
    Plant 8650 (Vendor 10999344) -> Plant 8601 - MM# 4908281 / 4908323 / 4908968 / 4922001
    NB PO# 6500002233 / ZU PO 4600000502

    Please  go thorugh this  ...
    eCATT stands for extended Computer Aided Test Tool (eCATT) which is built is testing tool to test SAP system. By using testing tool we can test the entire business process, and we can also use this tool with a third party testing tool (I am not covering this topic). Execution of every test script ends with a log, which explains the results of the test script. 
    By using eCATT we can do following operations,
    ·        Test transactions, reports, and scenarios
    ·        Call BAPIs and function modules
    ·        Test remote systems
    ·        Check authorizations (user profiles)
    ·        Test updates (database, applications, GUI)
    ·        Test the effect of changes to customizing settings
    ·        Check system messages
    For more information go to: eCATT::Extended Computer Aided Test Tool (sdn.com)
    Here I am discussing fundamentals about eCATT in detail. You can find very good documentation in sdn.com.
    To develop a test script in eCATT we need to follow the following steps,
    1. Creating Test Scripts.
    2. Creating Test Data Containers[16] .
    3. Understanding System Data Containers[17] .
    4. Executing Test Configurations.
    There is a very good web blog on eCATT in sdn.com which explains eCATT with necessary screen shots. To read document click here Blog on eCATT in sdn.com
    For  details  and the screenshots     please  see the  link
    http://www.erpgenie.com/sap/ecatt/
    Reward  points if it is  usefull ...
    Girish

  • How to Test the individualmapping field and conditions...

    Hi Frnds,
    I done mapping from source to destination as per tech spec in my scenario based on some conditions
    i used node functions also..
    But my question is how to test the every mapping filed , condition is correct or not, what i used node function working properly or not...
    Regards,
    Raj

    Hi
    If you want to check mapping for individual mapping then in design go to test tab and put your data there and then come again on Design tab and click on any target field fro which you want to check mapping then right click on target field in mpping area and click on Display queue and check whether it is expected output for that particular field mapping.
    Regards
    Sami
    Reward points if useful.

  • How to test the performed  SAP SCRIPT

    Hi friends can any one help for
    how to test the performed  SAP SCRIPT. What are the necessary codes or anything else for performing it

    Praveen,
    Can you be much clear with your query? What do you mean by performing? Do you mean how to execute it ?
    Regards,
    Vinod.

  • How to test the UDA or Attribute of an ancestor member

    Hi everybody !I would like to know how to test the UDA or attribute (I can use both) of the ancestor (or the parent of the parent) of the current member please ?(the current member is on level 0 et the ancestor is on level 2).I tryed some syntax but any result :(Thanks very much for your help... JaspePS : Sorry for my "bad" english, i'm french...

    You can try using this IF conditional statement:if (@count (skipnone, (@uda (dimName, myUDA) and @ancest (@currmbr (dimName), -2))) == 1)where:dimName is the dimension of the level 0 member you are testingmyUDA is the UDA you are testingWhat this does is it counts the number of members that meet two criteria. First, it must have the UDA you specify and, second, it must be an ancestor of the current member at a specified level.If the current member has a level 2 ancestor with the UDA, it should return one member.

  • How to test the process chains

    hi sap gurus,
    Can anybody tell me how to test the Process chains before i load real time data,i run process chains every morning 6.15 am,before that i want to test every process is linked to another.
    thanks in advance.

    Hi,
    Scheduling the process is the only way to check whether it is running fine or not. The process chains should be checked first in the Dev server and then in the QA server before transported to Prod.
    You can also check the process chain using the "check" button to see if the processes are in the proper sequence or not.
    There is a "log" button to keep track of the progress of the chain
    suresh

  • How to test the RFC to Flat File scenario

    Hi,
    How to test the RFC to Flat File scenario
    regards,
    kiran

    Hi,
    After running the RFC it's going Dump.
    this is the error message i got.
    "Error analysis                                                                     
    An error occurred when executing a Remote Function Call.                     
    "CPI-C error CM_RESOURCE_FAILURE_NO_RETRY"                                                
    Status of connection.... "CODE=CM_RESOURCE_FAILURE_NO_RETRY -1 -1 SAPCODE=666
    CONV="                                                                      
    Internal error code.... "RFC_IO5"                                                           
    There is an error in the communication system. To clarify                    
    and resolve the error, contact your system administrator.                     "

  • How to test the OID IT Resource connection

    Hi,
    I am trying to test the connectivity of the OID IT Resource in OIM. Could somebody help me in knowing how to test the connectivity of the resource.
    Regards,
    Nitin

    Hi Suren,
    I am not using any Ldap browser. I am using Oracle Directory Manager.
    I tried giving the following value in my searchfilter (objectclass=top)(cn=HPOONIA).
    But I am getting the following errors :
    Parameter Variables passed into com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): Login Variables are:: are sServerName = 129.146.14.92, sPortNo = 389, sPrincipalDN = cn=orcladmin,cn=Users,dc=csc,dc=com, sProviderURL = ldap://129.146.14.92:389,
    INFO,09 Apr 2010 04:40:09,317,[XL_INTG.OID], Parameter Variables passed into com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): Login Variables are:: are sServerName = 129.146.14.92, sPortNo = 389, sPrincipalDN = cn=orcladmin,cn=Users,dc=csc,dc=com, sProviderURL = ldap://129.146.14.92:389,
    DEBUG,09 Apr 2010 04:40:09,318,[XL_INTG.OID], Parameter Variables passed into com.thortech.xl.integration.OID.util.tcUtilLDAPOperations:tcUtilLDAPOperations(): Login Variables are:: for isSSLEnabled = false
    DEBUG,09 Apr 2010 04:40:09,318,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : tcUtilLDAPOperations():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : processChange():: STARTED
    DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: STARTED
    DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: STARTED
    DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : checkEmpty():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,322,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : getSearchAttributes():: STARTED
    DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : getFieldMappings():: STARTED
    DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : getSearchAttributes():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : connectToAvailableOID():: STARTED
    DEBUG,09 Apr 2010 04:40:09,323,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : hashTableEnv():: STARTED
    DEBUG,09 Apr 2010 04:40:09,335,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : hashTableEnv():: FINISHED
    INFO,09 Apr 2010 04:40:09,335,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : connectToAvailableOID() : SSL option is not selected in ITResource
    DEBUG,09 Apr 2010 04:40:09,348,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : connectToAvailableOID():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,348,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : doReconSearch():: STARTED
    DEBUG,09 Apr 2010 04:40:09,349,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : isPagingSupport():: STARTED
    DEBUG,09 Apr 2010 04:40:09,353,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : isPagingSupport():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,353,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch():: STARTED
    DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : Parameter Variables passed are: pSearchBase = [cn=Users,dc=csc,dc=com], pFilterExpression = [(&(objectclass=top)(cn=HPOONIA)(modifyTimestamp>=19000101010001Z))], pIsRelative = [true], pAttrNames = [[Ljava.lang.String;@3250b1]
    INFO,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : Parameter Variables passed are: pSearchBase = [cn=Users,dc=csc,dc=com], pFilterExpression = [(&(objectclass=top)(cn=HPOONIA)(modifyTimestamp>=19000101010001Z))], pIsRelative = [true], pAttrNames = [[Ljava.lang.String;@3250b1]
    DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : javax.naming.directory.SearchControls@14fa707search controls**********************
    DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : count limit**********************
    DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : subtree scope**********************
    DEBUG,09 Apr 2010 04:40:09,354,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : setting returning attributes if NOT NULL**********************
    DEBUG,09 Apr 2010 04:40:09,370,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : DID NOT FIND ANY RECORDS after Modified Time Stamp
    DEBUG,09 Apr 2010 04:40:09,370,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : parseControls():: STARTED
    DEBUG,09 Apr 2010 04:40:09,370,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : getControlInstance():: STARTED
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : getControlInstance():: FINISHED
    INFO,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : parseControls() : >>Next Page
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : parseControls():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : cookie: [B@5eef81
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : cookie length : 0
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch() : Total No Of Records are reconciled are = 0
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: STARTED
    DEBUG,09 Apr 2010 04:40:09,376,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP() : Closing initial directory context
    DEBUG,09 Apr 2010 04:40:09,380,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : pagingReconSearch():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : doReconSearch():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: STARTED
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP() : Closing initial directory context
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.util.tcUtilLDAPOperations : disconnectFromLDAP():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : processChange():: FINISHED
    DEBUG,09 Apr 2010 04:40:09,381,[XL_INTG.OID],com.thortech.xl.integration.OID.schedule.tasks.tcTskOIDUserReconciliation : execute():: FINISHED
    Please help.
    Regards,
    Nitin

Maybe you are looking for