How to: The Mix Effect of a vinyl record quick slow down to stop.

Here's an interesting question (to me anyway :))...
One of my Mixes is screaming out for an effect like this.
The same as if a DJ would take a vinyl record and slow it down to a stop.
Has anyone done this in Logic before? My first thought was to use a master tempo on a bus, and all tracks assigned to it.
I was toying around with this last night and it just wasn't right.
Any thoughts are much appreciated..
Adam

Also at the Arrange window you can click on View>Global Tracks and then View>Global Tracks components>tempo
There you can draw any tempo changes you want your track to have to speed it up or slow it down.
Hope this helps
powerbook G4   Mac OS X (10.4.5)   logic pro 7.1.1,FW410 m-audio

Similar Messages

  • Flash html5 - How can i make an internal movie clip slow down and stop when it get to a certain frame?

    I am creating an automotive braking system using flash and have a wheel turning. I want the wheel to slow down and stop after the brake pedal is pushed at a certain frame. I know I could do this with frame by frame animation but was hoping there was a short cut - javascript?? If not the slowing down portion then is there code for just making the internal movie clip (wheel turning) to stop when it gets to a frame.? Thanks

    you can use the ticker class to create a loop that you use to control the wheel's rotation or frame, TweenJS v0.6.0 API Documentation : Ticker

  • Newbie M5 question - How does the Censor effect blur only the inside of the circle?

    I'm brand new to Motion 5. I'm trying to understand how an effect like "Censor" applies the blur to only the inside of the circle. I opened the Censor effect in M5 and studied it, but the answer is just out of my grasp. Can someone explain it to me, or point me to an article that will help? Thanks.
    Dan

    In Motion, in the Censor effect project, if you turn off the Effect Source (lowest layer) you'll see the "circle" used to "limit" the effect.
    Actually, this is just an illusion:
    The original Effect Source (in FCPX, that's whatever clip this effect is applied to) is Cloned (the layer is called "Mask"): a clone is basically a "rasterized copy" of the original -- what I mean by that is that Clones not only copy original objects, but also all their filters and other layers/effects if you clone a group of objects -- reducing them all down to a single layer copy.  This copy can be treated just like any other object in Motion (with an interesting exception*): you can add masks and other filter effects and/or behaviors to create new actions while the original source of the clone is left intact.
    In this effect, there is a Circle Mask applied to the Clone, as well as three different Filters: Pixellate, Gaussian Blur, and Brightness. These three different filters are turned on and off separately by use of a "pop-up" rig so that only one of the filters is applied to the clone at a time.  The gear shaped objects are Behaviors, in this case Link behaviors that "link" to the Circle Blur filter properties that is attached to the Effect Source which control the location in the canvas and the scale of the mask (Radius to Scale-X and another to Scale-Y). The Circle Blur filter has Onscreen Controls of a center point and a "radius" and those property values can be shared to other objects in a project via these link behaviors. The Circle  Blur filter effect is turned off in this project because it *only* needed as a *source* for the onscreen control properties (and those can be turned on for use in FCPX [Publish OSC] whether the filter type is used or not.)  All of the visible action in this project is created by applying other filter effects to the Clone copy and masking the area so that the rest of the source is uneffected while this effect (Censor) is active in FCPX.
    The *interesting exception: Clones can be "retimed" -- even timed to go in reverse. No other object (other than actual video) can be made to do the same. What does this mean? It means that you can create, basically, an "in-project" video of other objects in animation (without exporting the animation first) and retime them to loop over and over, go in reverse, speed up, slow down, etc... Clones are a very useful tool in Motion (not to mention "light-weight").  Their only drawback: they *flatten* 3D animations, so you can't apply "more 3D" effects to them because they'll just look flattened on a plane if you do. So any time you feel you need to duplicate something, ask yourself if you would be better served by a clone instead.
    HTH

  • How's the After Effects CS5 (10.0.1) update working?

    Have you installed the After Effects CS5 (10.0.1) update? If not, why not? If so, let us know how it's going for you.
    Let us know what problems are fixed by this update for you. See this page for a long list of fixed items, added capabilities, and known issues.
    Please continue to report bugs and use the crash reporter to let us know of problems that persist (or new ones).

    My user experience with 10.0.1 is no different than 10.0.0:
    -My #1 recurring crasher is "blitpipe disengaged".
    -Multiprocessing is still broken: http://forums.adobe.com/thread/668541 & hhttp://forums.adobe.com/thread/721486

  • How is the After Effects CS5 (10.0.1) update working for you?

    The After Effects CS5 (10.0.1) update is available. It fixes a lot of crashes, errors, and other problems, and it adds some capabilities for RED (R3D) footage and the Apply Color LUT effect.
    After you've installed the update, let us know how it's working for you.

    Todd,
    I installed it over the weekend after seeing it mentioned in my RSS feed and have been using it heavily for a few days. The updater launched from within AE did not find the update. I had to go to the download page that was linked to in the feed. Installed from that download with no problem on Windows 7.
    AE 10.0.1. has crashed on me twice over the weekend. Both times I was scrubbing through a composition that uses a pretty intense plug-in (Video Gogh). I would submit a bug report to Adobe or the plug-in developer, but the problem has not been repeatable. Also, an AE composition dynamically linked to PPro may have made PPro crash. I wish I could give more details on that but I was, as usual, trying to do too many things at one time.
    Other than that, everything went smoothly during many hours of compositing in AE.

  • How can I add effects to voice while recording

    Hey
                  Ok logic pros and users   heres and important question ....     I have my vocalist comming over and he likes a bit of effect on his voice that gives him the sound like it would be recorded  I recorded him last time on a tascam mk-2  with effects like reverb and some guitar effects which really enhanced his voice.  He s using a compression mic  so i do have to watch passing gas while hes recording because it will pick it up lol
                  What can I do on the audo track while setting up his voice to enhance his singing to the point that it will sound extremely good and not bland ..    What I am trying to say he sounds like jeff tate  and I want a tate voice like the album while hes recording i gives him an uplift and higher range
                                                                      Thanks

    well, it should go without saying... there's no magic bullet here. Either someone can sing or they can't. The first step to them sounding good is their own ability.
    Beyond that, a good quality microphone into a decent mic pre-amp is important.
    Ok, so, after stating the obvious... (which I'm amazed at how many people STILL think software will make them a good musician....)
    For monitoring, you could start with any channel strip setting in the vocal category. Most will be over the top, in terms of what you need, but it'll get you started. You'll have to watch latency though. Depending on your audio interface, and how well the drivers were written, will determine if there's noticeable delay in the singers headphones. But a little reverb or delay inserted right on the channel strip will let him hear the FX as he sings.
    If you want to actually print these FX to tape, you will need to record through an input object.

  • When downloading CS 5.5 from the direct link it eventually slows down and stops.  How am I supposed to download the file?

    I am trying to download CS 5.5 on to my new laptop since my old one died.  I am using the direct link found Download CS5.5 products.  It starts off fine but it slows down and eventually stops.  How am I supposed to download the entire file?  I am using Chrome on Windows 8.1 if it makes any difference.

    Adding to What Anand has mentioned, please make sure that any online active Defence system should be turned off ( For eg, Kaspersky, Norton or AVG ). Also, if you are behind a corporate network, please try a different network and check again.

  • HT2479 How can I get a clip to fast forward or slow down?

    I tried to fast forward a clip and it said it wasn't an option. I tried to do it with the instant replay and the slow motion and it didn't work as well. . How can I fix this?

    Hi Katefrommass,
    The article below will explain how to use the speed effects in iMovie '11.
    Click on the link below to see more details and screenshots. 
    iMovie '11: Slow down or speed up video
    http://support.apple.com/kb/PH2239
    I hope this information helps ....
    Have a great day!
    - Judy

  • I downloaded the Apple update yesterday and my computer has slowed down plus I can't move emails to my different mailboxes.

    Why has my computer slowed down?  I downloaded the update yesterday and since then the color wheel keeps circling and I can't download or move emails to my different mailboxes.  There is no consistent patern in which emails can be transferred.  There is a consistent patern with the color wheel coming on while I am typing and stoping the recording of the keys.

    Please download, install and run Etrecheck.
    Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
    http://www.etresoft.com/etrecheck
    Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

  • How will the Cloud effect use of files on Networked drives?

    Currently I have LR on my desktop and my laptop. I cannot work on my files via my laptop and have the work show up when I use my PC. I have imported the files to LR from the same location on both of my machines but the file updates are specific to the machine I use. I had tried to move all files to a ntework drive and that doesn't work either. The only way to do it is to unplug the drive from one computer and move it to the next. Will the CC subscription eliminate this un integrated use of LR?

    Hi Steve,
    Working with Catalogs is not changing with CC subscription. Lightroom will still be available as a boxed product as well.
    The current support for networked catalogs has not changed (not supported due to the many many different network configurations possible).
    As far as working on the same catalog between laptop and desktop, you'll want to put your catalog on your external drive along with your images and previews.
    More info on that process here
    Hope this helps,
    Regards

  • The spinning beach ball - why has my MacBook slowed down SO much?

    My MacBook has become terribly slow. I get the spinning beachball almost every time I hit a key now, and I am just about ready to throw everything out the window. Mainly I use my laptop for internet browsing (Safari only), iTunes and iPhoto. I do have third party stuff on my computer such as the software for my Nike Fuelband, and Jawbone Updater for my Jambox. I have Java too, which I probaby don't need. Oh I also have some card games - but those sorts of things I get from the App Store. I don't muck around with settings or anything, because I don't know anything about that! I just USE my laptop. So having said that, I don't know why I would have the spinning beachball as my new sidekick....
    I have followed instructions I found on another discussion (https://discussions.apple.com/thread/5303293?start=0&tstart=0) to test my MacBook. My results are good news I think: Logging in as a guest account, everything runs like I would hope - iTunes opens up quickly, same with iPhoto, and when I look up sites on Safari they load up quickly. I then started in safe mode, and logged in as myself. Excusing the "stuttering" of the graphics and such, I would say that in safe mode things moved along much more quickly. I got the beachball in safe mode but not every time I tried opening something, and only briefly when it did appear.
    My question is, where do I go from here? How do I "clean up" or fix my MacBook so that it runs like it used to? Like I say, I think it must be good news that in those test scenarios my MacBook performs much more like the good old days. Does this suggest that my own account just has crap on it that needs to go? And if so, the big question is, how on earth would I go about identifying the source(s) of the problem and then getting rid of them?
    I have searched some on the forums here but I'm at a bit of a loss because I don't really even know what to search for! As I say, I am a complete user only! I do follow instructions pretty well though, so if anyone could point me to the right help page or give me further advice, I would be oh-so-grateful!
    cheers,
    Lydia

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It changes nothing, and therefore will not, in itself, solve your problem.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as certain other aspects of the configuration that may have a bearing on the problem. Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac. 
    These steps are to be taken while booted in “normal” mode, not in safe mode, if possible. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so. 
    Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable text output, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
    The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways: 
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) 
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. 
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid. 
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign. 
    Step 1 
    Triple-click anywhere in the line of text below on this page to select it:
    P=/usr/libexec/PlistBuddy; E () { [ "$o" ] && echo $'\n'$1: && echo "$o"; }; F () { o=$($P -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); E "$1"; }; { o=$(kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'); E "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); E "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); E "Inserted libraries"; o=$(crontab -l); E "User cron tasks"; o=$(cat /e*/lau*); E "Global launchd configuration"; o=$(cat ~/.lau*); E "Per-user launchd configuration"; F "Global login items" /L*/P*/loginwindow.plist Path; F "Per-user login items" L*/P*/com.apple.loginitems.plist Path; F "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l); [ "$o" == 0 ] || printf "\nRestricted user files: %s\n" $o; cd; o=$(find -L /S*/L*/E* {,/}L*/{Ad,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do $P -c 'Print :CFBundleIdentifier' "$d/Info.plist" | egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" && echo ${d%/Contents}; done); E "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); E "Unsigned shared libraries"; for d in {,/}L*/{La,Priv,Sta}* L*/Fonts; do o=$(ls -A "$d"); E "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
    Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. No typing is involved in this step.
    Step 2 
    Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
    E () { [ "$o" ] && echo $'\n'$1: && echo "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'); E "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); E "Login hook"; o=$(sudo crontab -l); E "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}'); E "Log check"; } 2> /dev/null | pbcopy; echo $'\nStep 2 done'
    This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    You can then quit Terminal.
    To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
    Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
    Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
    Remember, Steps 1 and 2 are all copy-and-paste — no typing is involved, apart from your password. Also remember to post the output.

  • When more than two tabs are open (no matter the content), FireFox (3.6 and 4.0) slows down and the CPU usage value on the Task Manager shoots up to 100%.

    The Memory usage also shoots up to about 475k MB. This has happened over two computers, the first being a stock Dell Inspiron 1620 with Windows XP and this one being a stock HP G72 with Windows 7. I used a data transfer cable to transfer all settings from the first computer to this computer. The problem persisted through 2 updates (3.5>3.6>4.0). The only FF add-ons I have downloaded are NoScript and AdBlocker; I also have several unused toolbars downloaded from various other applications (Yahoo, Norton, and AVG) and frequently use the Google toolbar, which in an unrelated matter stopped saving my searches or suggesting searches while typing at the 4.0 upgrade. If you need any more information, I'd be happy to post it.

    Try a new Profile in Firefox 4 and see how it is. <br />
    http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  • The 10.5.1 to 10.5.5 slow down

    Hello everyone I haven't been here in a while.
    The computer: Mac Mini Late 2005 pre Intel
    The issue: When i upgraded to 10.5.1 i was happy because my computer was faster in Leopard than it was in Tiger but after a few updates its now gotten really slow especially at startup which can take up to 10 minutes. I have fixed permissions, no effect. I have tried OnyX but it didn't really help but i tried that several months ago so things might have changed since then. Does anyone know what i need to do to get my startup time down? Btw where did my Startup Window go? xD

    for some reason it is giving me a hard time answering this as solved.
    So lets recap:
    What needed to be fixed:
    1. (org.postfix.master) Failed to count the number of files in "/var/spool/postfix/maildrop": No such file or directory
    sudo mkdir /var/spool/postfix
    <password>
    sudo postfix stop
    sudo postfix start
    com.apple.kdcmond40 Couldn't open log file /var/log/krb5kdc/kdc.log: No such file or directory
    sudo mkdir /var/log/krb5kdc
    <password>
    Clean out the cache

  • Does the most recent OS X v10.6 update slow down your computer?

    When I first upgraded to Snow Leopard, it felt like Christmas: I got disk space back and my Mac seemed faster and more responsive.
    But after I installed the latest updates (I believe it was OS X v10.6.2 and a firmware upgrade), things have not been so rosy:
    - there is a noticeable delay when I modify the volume via keyboard keys, this used to instantaneous, now it's like a 1 second lag
    - switching applications takes longer, balking at the animation of switching between spaces
    - apps in Fusion jam up much more frequently
    As far as I can tell, my usage patterns haven't changed at all, and I really did start noticing it from my first use of new updates.
    Is anyone else experiencing something similar? I'm not too sure how to diagnose and fix this. It's too bad, because I was really enjoying the performance improvements from Snow Leopard, and now the responsiveness benefit seems gone.

    perropicante wrote:
    When I first upgraded to Snow Leopard, it felt like Christmas: I got disk space back and my Mac seemed faster and more responsive.
    But after I installed the latest updates (I believe it was OS X v10.6.2 and a >firmware upgrade), things have not been so rosy:
    Here are some fixes for general slowness that have worked for others. Ignore any you already have tried and any you don't want to try. Try the possible fixes in the order you prefer.
    1. If you are running iAntivirus, then uninstall it.
    2. Try [resetting your PRAM/NVRAM|http://support.apple.com/kb/HT1379?viewlocale=en_US]. If everything isn't fixed, then follow the [steps here including resetting your SMC if necessary|http://support.apple.com/kb/HT1543].
    3. Look in User > Library > StartupItems and in System > Library > StartupItems. Move whatever you find in them to the desktop to see if your problem is resolved. You can move whatever you want back one at a time to test which, if any, is your problem.
    4. Use [Preferential Treatment|http://www.versiontracker.com/dyn/moreinfo/macosx/22790] to repair your user preferences.
    5.
    a. Create a new user
    b. Test apps to see that they work with no crashing.
    c. Drag your data and other needed things (e.g., mail) (not your whole home folder) into their proper places in your new user home folder. Use [this guide|http://discussions.apple.com/message.jspa?messageID=6185507] to know what to drag.
    d. Re-enter your app preferences if you are going to keep using the new user.
    e. If you want to use the old user name, then delete the old account; recreate it; and move everything back to the original locations.
    f. You will need to fix the permissions, app settings, etc.
    6. Go back to 10.6. You can do so simply by reinstalling Snow over Snow as in doing an upgrade install.
    7. Reinstall .6.1 and .6.2 using [only the combo updater|http://support.apple.com/kb/DL959].

  • With the new 3.6.4. update, the video playback on streaming websites is choppy, slows down and/or stops.

    I watched the videos on stream last few months on Firefox 3.6.3 and starting today they became choppy.
    == This happened ==
    Every time Firefox opened
    == I updated to version 3.6.4.

    Ken, you're have the 10.0 r45 version for the Flash plugin. Please make sure your Flash plugin is up to date: [http://www.mozilla.com/en-US/plugincheck/]
    If you're having issues with 3.6.4 and the Flash plugin, please take a look at [[The Adobe Flash plugin has crashed]] and increase the timeout as indicated.

Maybe you are looking for