How to: time capsule 4G working without ethernet wire

HI,
I m a french user, i don t found an official french community... So i use it in english with my bad language :/ appologies for that!
I ll try to explained you my problem.
When i call the apple chat hotline to have more informations about TC, he saiid me that i could use it to boost my wifi signal by place TC where i would.
Exemple, dsl box in sofa room, and TC at second floor to boost wifi signal lowest.
GREAT! I buy it!
After trying many settings, i don t found the solve without ethernet wire behind DSL Box and Time Capsule....
Please some one could help me?
Many thanks best regards.

There is a setting in the time capsule to set it up to extend à wireless network. Use that. Also make sure it is in bridge mode, it schould not use THE built in dhcp server.
Jan

Similar Messages

Time capsule not working over ethernet cable

my time capsule is connected to a router (also transmitting a wireless network) using ethernet cable. I can connect to the time capsule using both mac and windows over wireless, and I have internet. However, there's no internet when using ethernet cable (I see the time capsule in my airport utility, and I have it on bridge mode. Still, no internet.)

How old is the TC? What model, A1xxx from the box or rubber mat?
Failure of the ethernet ports does happen on the Gen3 but it is pretty odd.
I would test with another ethernet cable.. check the connectivity leds go on when you plug the cable in. If not, it cannot work.. get another cable or try another port or device.
Make sure the ethernet is set to auto in the computer.
Tell me what IP gateway and dns address it is getting. We can work forward from there.

Time Capsule Stopped Working Without Warning

I purchased my iMac & Time Capsule (802.11n) back in 2006. Last Wednesday (17 Mar 2010) evening, and without any type of warning, the capsule stopped working. The little green light went out and I have not been able to get it running since. My DSL connection runs through the capsule to the computer. Thus, I have not been able to go online. I'm a family history researcher and I need my Mac for email, research, and family websites. I might also add that I'm NOT a computer nerd; I'm just an older lady with basic computer knowledge, and I need it to work.
I've had to dust off my old unreliable windows based pc, set it all up again, download updates to the Ya-Ya, set up another email addy ([email protected]) - just to be able to get online to find out what I can or should do with this problem.
Can anyone help me please?
Thanks! TJ

I also had a TC fail. However, I did the mod with the fan to keep it cool (http://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modems /apple-time-capsule-repair/apple-time-capsule-fan-mod), and then it failed a month later.
I changed the capacitors on the powersupply board of the TC with instructions from: http://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modems /apple-time-capsule-repair/apple-time-capsule-repair-type2
Now it is back up and running, will see how long it lasts.
BTW I went to MacMall in Santa Monica, CA and I was told since I did the fan mod, I lost any chance at a warranty repair/exchange.
My advice: try and get a new one from Apple before you do anything, and do not do the fan mod, it does not completely prevent the failure.... and then one is out of luck with regards to Applecare. Apparently, you can attach the TC to any Applecare/warranty that you have for an Apple CPU. So, if you are under warranty with any CPU, the age of the TC is not an issue (according to my readings).
Good luck....

Can't get time capsule to work via ethernet direct to mac

Hi All
I am having trouble setting up my time capsule direct to my mac via ethernet it works fine through my router backs up a treat via ethernet.
Can anyone help me through the process have looked online but they all set them up through their routers.
Cheers

If you reset the Time Capsule by holding in the reset button for 10 seconds and then releasing and allowing it to restart, then you need to connect an Ethernet cable from one of the LAN <-> ports on your wireless router to the WAN "O" port on the Time Capsule.
Then configure the Time Capsule to create a new wireless network. You don't have to use this new network....you can use your existing network if you want.
Then connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.

HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

How can I access the time capsule hard drive via ethernet?

I recently bought a new laptop, as my old one was sadly stolen. I'm trying to connect to my backed up time capsule hard drive via ethernet to retrieve my files, but it doesn't seem to work. Oddly enough I have no issues over wifi. When I switch from wifi to ethernet, it gives me an error message stating that the disk was not found in the network. I have a MacBook Air with an ethernet adapter if that makes any difference. I'm also running the latest OS X and firmware. Wifi is simply too slow for this restoration process, so any suggestions?
Could I possibly connect via USB? What kind of cable would that require? Is the ethernet issue a problem with my settings?
Help greatly appreciated

manzalawy7 wrote:
I'm trying to connect to my backed up time capsule hard drive via ethernet to retrieve my files, but it doesn't seem to work.
In the Network panel of System Preferences do you have an Ethernet connection item on the left? If not, authenticate if necessary by clicking on the lock, then click the plus sign at the bottom of that column and add an Ethernet item.
When I switch from wifi to ethernet, it gives me an error message stating that the disk was not found in the network.
How are you doing that switching? When you switch to Ethernet do you have connectivity to the Internet? If not, do you see a tiny green light on the Time Capsule next to the Ethernet socket you're using?
Could I possibly connect via USB?
No.

How to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?

Hi, I would be very grateful if someone could tell me how to disconnect internet connection in Time Capsule and reconnect without restarting the whole device?
The thing is that as I have a dynamic IP address, everytime I restart the internet connection my IP address changes. I sometimes need it to change, so I need to restart the connection. I don't know another way to restart the connection than restarting the whole Time Capsule.
Thanks!!
PD: the computer I use is Windows based, using the Airport Utility for Windows, but I also have a MacBook Pro I could use and an iPhone too.

The utility in windows is very like Mac so the screenshots are from Mac as I don't have windows available now.
How this works depends on the setup of the TC.. which you did not tell us.. you cannot change anything if you do not have the TC as the main router in the network.
So on the internet tab you need to share a public IP address.
On the next tab where you set IP address.
Click the renew IP address.
It might work.. and it might not.. the problem is you are not disconnecting the network.. sometimes the hard disconnection is required before the address will renew..
What about unplugging the WAN port.. then click renew the IP which will fail.. then plug the wan back in again.
In the end it is easier and faster to power cycle the TC.

How is Time Capsule controlled through lion (without airport)?

how is Time Capsule controlled through lion (without airport)?

You can do some limited setup from iOS devices..
You can connect via ethernet from any computer.

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

I just upgraded from my 2008 MacBook to a new Macbook Pro. How do I get my time capsule to work on my new MacBook? I did data migration, but the time capsule did not pick it up. Any ideas?

If you migrated all the info from time machine to your new MBP. The TM will usually ask to connect to the old backups.. sorry I am not sure is this what you want to do.. Personally I think you start a fresh backup.
BTW Time Capsule does not do anything.. it is a dumb hard disk in a box.. it is TM that does everything.
Look at B5 and B6 here about connecting to your backup.
http://pondini.org/TM/Troubleshooting.html

Time Capsule not work with appletalk printers connected via ethernet?

I have seen no definitive answers to this problem posted here or on support forum. Some have suggested (but Apple refuses to confirm) that Time Capsule does not support AppleTalk devices (particularly printers) connected via Ethernet to Time Capsule. Even the "Genius Bar" guys can't tell you for sure, but this is what they suspect also.
I am a 25 year Macintosh user. I have conducted numerous experiments on this problem. What follows is my analysis and work around.
I have found no way to connect AppleTalk printers to Time Capsule by an Ethernet network connected to the back of the Time Capsule. It just doesn't work. Forget all the posts about what to try. Especially forget about resetting your printer settings. Waste of time. This leads me to conclude that those who suspect that Time Capsule does not support AppleTalk printers connected on an Ethernet network are absolutely correct. It is a hardware or software deficiency. I do not know why Apple won't just publish this in their technical specs. It would save us users a lot of time and frustration.
Now the work around. The only thing that I have found that will work is to set up an Airport Extreme to extend the wireless network created with the Time Capsule. Plug your ethernet network into the Airport Extreme, NOT into the Time Capsule. I presume (but have not tested) that this works with an Airport Express as well. I did this with my old Airport Extreme that I had left over after buying my new Time Capsule. Now the printers show up again and print fine.
Please let me know what your results are if you try this.

The problem is caused by an interaction between the Airport Extreme Update 2008-004 and the TC 7.3 firmware. I swapped out my TC for my AirPort Extreme (which sat on a shelf unused since I bought the TC). It has version 6.xx of the firmware. Immediately I could see my printer when I wirelessly connect with my MBPro and can print from it. I put the TC back and then did an Archive and Install of 7.5 on my MBPro. I did every software update except the Airport Extreme Update 2008-004. I could see my printer and print to it! After cloning my HD, I then applied the 2008-004 update to 7.5.5. That broke the wireless printing again! I tried TC firmware 7.3, 7.3.1, and 7.3.2 but not go. It is clear that my computer is trying to communicate with the printer (lots of flashing lights on my LAN switch) but no successful handshaking. I restored my hard drive from the clone and I now I can print again. Final word: if you want to print from a wireless computer connection to an AppleTalk printer connected to TC's LAN do not apply the 2008-004 update to your computer. Apple: please fix this problem.

How can I make sure time capsule is working?

How can I check time capsule to make sure it is backing up?

Suppose time capsule is working and I delete some pictures. Will I just need to remember what date I deleted pictures and just keep that date in mind to know pictures from a certain time only live on the time capsule?
This is a very good way to lose your images.
Time Machine keeps track of the changes on your Mac. If you delete files on your Mac, Time Machine will "backup" that change....and at some point it will delete the files from the Time Capsule......you just don't know when this might occur.
It might occur within the next day or so, or at some point in the future. You cannot predict this.
But, even if the files stay on the Time Capsule for a few weeks......these are your only copies of your images. You have no backups in the event of a problem with the Time Capsule.

Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following: The backup

Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.

If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how.

My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for 10 secs. I just cannot work out what else to do?

My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.

The ethernet says self assigned IP 169.254.67.6
Then the ethernet is not getting an IP from the TC.. there is no connection.
I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
Thanks
In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
To get access to the TC you need this led to be green.. is it?
If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
How old and what model is the TC?
The A number from the rubber mat will tell us the model.

Time capsule doesnt work with telia bredband no wifi

Time capsule doesnt work with telia bredband no wifi. Time capsule and its wifi worked in the beginning, but now it doesnt. I have tried everything without success.

There is no question.. so if it is a statement of resignation.. then if under warranty and faulty Apple will fix it/replace it.. if not dead you will be given it back.
Are you using Lion? If so did you download 5.6 airport utility?
Plug the TC into a computer by ethernet.. hold in reset for 10sec.. and then redo the setup.
Give TC and wireless short names and no spaces and no special characters.. lock the wireless to manual a/n-b/g and fix the channels.
Then if it doesn't work most likely faulty. Otherwise it is just setup is wrong.

How to: time capsule 4G working without ethernet wire

Similar Messages

Maybe you are looking for