How to trace Function Modules ?
Hi ,
Can anybody tell me how I can trace or find all the function modules called by a trancaction ?
I tried it using transaction ST05 but didn't got the expected result. Is there any other way to find it other than debugging the transaction ?
I want the same for transaction "VK12".
Thanks
Ashwa
Hi Ashwa,
Approach it in this way.
1) Goto the transaction VK12, first screen (Change Condition records).
2) Then in the command prompt enter <b>/h</b>, ie.. switch debugging on.
3)Hit Enter, will enter the debugging mode
4)Then in the MENU BAR goto Breakpoints>Breakpoints At>Statement
5)Enter <b>CALL</b> here
6)Save and execute (F8)
Now your debugger will stop at all CALL statements, and thus you can trace the FM's called.
Regards,
Arun Sambargi.
Similar Messages
-
How to create function module for getting customer name
Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna -
How to create function module in abap for VirtualProvider in bi
how to create function module in abap for VirtualProvider in bi ???????????????
can any one help me with simple example ?????????????????
Moderator message : Duplicate post locked. Read forum rules before posting.
Edited by: Vinod Kumar on Jun 15, 2011 4:40 PMHi ,
Thanks for replies about my question??.
If i am using the exit in my char relation ship how can i debugg that exit???
if i am using BPS0 how to do it???If i am using BPS_WB how to do it??
Case1.Variable (type Exit) I known how to do debugg this one in BPS0 but i'm not sure in BPS_WB??
Case2:Char Relation Ship(Type Exit) how to do in BPS0 and BPS_WB??.
Thanks. -
HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM
PLEASE ANYONE TELL ME, ABOUT HOW TO CALL FUNCTION MODULE INSIDE SMARTFORM. IT IS VERY URGENT!!!!!!!!!1
Hi,
Under Global Definitions, we have 'Form Routines' tab. Under this tab, u can have a dynamic subroutine call. With in FORM and ENDFORM, you can call the Function Module.With in the Program Lines editor, u can define the subroutine........PERFORM.
If helpful, reward points.
Rgds,
CK -
How to Use Function Module READ_TEXT
Hi
Anyone give me code or link or example for how to use function module READ_TEXT
and what are the parameters which we have to pass in module.
Regards.
MohsinHi,
refer the given below code.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT = SY-MANDT
id = 'KOPF'uF0E0 these details we will get thru transaction , where we enter these details.
language = 'EN'uF0E0 these details we will get thru transaction , where we enter these details.
name = TNAME "table name
object = 'AUFK' " these details we will get thru transaction , where we enter these details.
* ARCHIVE_HANDLE = 0
* LOCAL_CAT = ' '
IMPORTING
HEADER = HTEXT
tables
lines = LTEXT
* EXCEPTIONS
* ID = 1
* LANGUAGE = 2
* NAME = 3
* NOT_FOUND = 4
* OBJECT = 5
* REFERENCE_CHECK = 6
* WRONG_ACCESS_TO_ARCHIVE = 7
* OTHERS = 8
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks
Arun -
How to use functional module " DETERMINE_DUE_DATE"
Hi All,
Can anyone suggest how to use functional module " DETERMINE_DUE_DATE" as it is used in an FI transaction code "FBL5N" and i have to use it in my zprogram to capture the net due date..please suggest..
Regards,
Shanuhi,
CALL FUNCTION 'DETERMINE_DUE_DATE'
EXPORTING
I_FAEDE = LS_FAEDE
IMPORTING
E_FAEDE = LS_FAEDE
EXCEPTIONS
OTHERS = 1 -
How to assign function module with process code in IDOC ?
how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
helpful answer will be rewarded?Hi,
First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
Thats the way to assign function module with process code.
In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
Reward if helpful.
with regards,
Syed -
How to Debug Functional Module called via RFC?
Hi Experts,
Please, can someone explain to me how to debug functional module that is called via RFC? Thanks in advance.
Best Regards,
AleksandarHi Laxman,
First of all thank you very much for giving attention to my post. Ok, I am trying to debug function module in RM-CA (FICA), function module is called by CRM system (via RFC) and in addition all this chain is triggered by WebClient.
I have user that can login on the CRM as well as on RM-CA (ECC 6.0) system, but those users are different (unfortunately I do not have administration permission so I cant change profiles of my users but I can ask for it). I can without any problem debug calls that come from WebClient, so setting an external break point in CRM system I can catch whatever I want but when process comes to point where actually call to back-end (RM-CA) takes place I simply cant get into functional module, that resides on RM-CA side. Actually what happens is that processing continues as was chosen NEXT STEP (F6).
To resume, two systems and two different users. Where XCM user should be created? (on RM-CA system or CRM). Should I change something in Menu option Utilities -> Settings -> ABAP Editor tab -> Debugging tab, in field users? If you need any additional info please tell me.
Thanks again for your support.
Aleksandar -
How to Add function modules to retrieve current month
how to Add function modules to retrieve current month from TVARV variables (currently we have functions to do close month).
Hi
Double click on the CODE for the line..
SET PF-STATUS 'XYZ'.
It will open the Menu Painter (SE41). Click on the Function Keys Tree Node and And assign the
Function Keys and Function codes for the Menu Items.
Hope this would help you.
Murthy -
How to Measure Function Module Performance?
Please can you tell me how I can measure the performance and trace the actions of a Function Module in R/3?
The function module in R/3 is run when a user calls a WebDynpro action from a WebDynpro screen within the SAP Portal.
I have tried running a trace on a user (ST05) but that only shows table actions (e.g. reads/fetch etc.). Also it does not appear in ST04 or ST03N. I would like to know how long the program actually takes to run.
Thanks.
PaulHi,
if I want to measure the runtime required to run some Abap, I use SE30. However i used it only for normal Dynpro application, not WebDynpro.
The detail level of the created trace can be configured. The aggregation level should be set to "Full" or "By call" at the beginning. Disabling aggregation leads to huge trace files.
You can select which statements should be traced. If you disable an option it's runtime is not lost but add to the traced action in the next level. If for example "Open SQL" is disabled, the time used by it is added into the net time of the method, function module of subroutine. Otherwise if "Open SQL" is enabled the net time of a function module does not include SQL time. SQL time is then listed separately.
Greetings -
How to debug Function Modules from ISA!!!
Hi Gurus,
How to debug the function modules from ISA.
For Ex:If i am in shopping cart or product catalog,e.t.c..i need to know which FM is calling from backend, how to debug the FMs/Bapis related to that from ISA side.
direct me to all the possible ways.
Regards,
Anil.Hello Anil,
There are a few things you need to look at when trying to debug .
1. The function module needed ( you can do a trace to see which one is called.)
2. The user that is been user With statefull and stateless connection the FM can be called by either the JCO user or the internet user. This will need to be considered when setting your external break point.
3. The server been used, You will need to check the XCM to see which server is been used ie are you using a group connect of a specific server , You need to make sure that you are setting the breakpoint on the server that is specified in the XCM.
Have a look at note [871907|https://service.sap.com/sap/support/notes/871907] the attachment to the note may help you a lot. .
Hope this helps.
Regards
Mark
Edited by: Mark Foley on Feb 11, 2009 11:10 AM -
How to release function module...
Hi All,
I have created one function module and activated that. How to release that function module?
But Release option is in deactive state...how can i release the FM....please let me know the resons for that.
thank you.hi,
change to edit mode and come to attribute tab then you release option will be activated and then you can release it
thanks
shivraj
Edited by: ShivrajSinha on Feb 8, 2010 11:14 AM -
How to call Function Module in Selection Screen
Hi All,
I have developed one HR Report (Qualification Overview Report: To display all active employees and their Qualifications along with their Proficiency).
Already it has 3 selection fields on selection screen and now I want one more field on selection screen like Qualification Id.
But when the end user press F4 it should display the Popup which comes in TCode: PA30 at the time of Creating Qualification.
I have debugged the Standard Code and searched the Function Module: 'RH_OBJID_REQUEST' which shows Popup which I wanted to show at Selection screen for newly added field.
So I have to define new field like 'Qualification Id' and want to attach above Function Module so that it will cater my requirement.
If anybody has worked on this type of requirement then please let me know.
Thanks,
Jay.Hi Raymond,
I have written following code:
s_quali is used in selection screen for Qualification Id.
SELECT-OPTIONS : s_quali FOR hrp1000-objid NO INTERVALS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_quali-low.
CALL FUNCTION 'RH_OBJID_REQUEST'
EXPORTING
plvar = '01'
otype = 'Q'
seark = '*'
seark_begda = '18000101'
seark_endda = '99991231'
set_mode = 'X'
TABLES
sel_objects = git_objects.
LOOP AT git_objects INTO wa_objects. " Logic is to fill up the Selection screen field
s_quali-low = wa_objects-objid.
APPEND s_quali TO s_quali.
CLEAR : s_quali, wa_objects.
ENDLOOP.
Now problem is that, its not populating all values in selection screen which I select from Popup screen (Choose Qualification).
I checked that the first value in the internal Table is over written by second records in the internal table
For e.g.: If I select 001,002,003,004 from Popup screen then I am able to see only 002,003,004 in the Multiple selection view of that field though it is available in the internal table s_quali (because I am filling up the table using Loop-Endloop)
Please advise me how to overcome this issue. (How to fill up selection screen)
Thanks,
Jay. -
How to call function module in R/3 from an BSP Page
Hi Experts,
I am new to ABAP and BSP as well.
I am creating an BSP page through which I want to call an function module in R/3 which will fetch a file from the application server and place into an internal table.
I have identified the function module.
My questions are:
Since I am going to have an web interface where on a button click the file should be uploaded to the intrernal table.So how do I call the function module.
Can I use JSP and ABAP together in an BSP page.
Thanks
AnkitHello Ankit,
Please check the following link:
http://help.sap.com/saphelp_47x200/helpdata/en/bd/ac1e3a0088e042e10000000a11402f/frameset.htm
I think it will answer all your queries.
Regards,
Siddhesh -
How to create function module to update z tables?
Hi,
I am new to ABAP. I checked the forum but did not find relevant solutions.
I have 2 z tables - ZFLIGHT and ZCUSTOMER. I have a few entries in each table.
I want to write a report to update the entries in the table using function modules. For that I have created a function module - zflight_fm and also a function group- zflight_fg and assigned the function group to the Fm. I do not know how to proceed further, what to put as import, export parameters, tables, changing etc. Further I want exceptions to handle the successful update of the entries.
Thanks and regards,
SmruthiSteps:
1) Changing --->a) Zflight TYPE ZFLIGHT(DDIC Ref) OR Zflight TYPE ANY TABLE
b) ZCustomer TYPE ZFLIGHT(DDIC Ref) OR ZCustomer TYPE ANY TABLE
2) Execptions:
a) Upload_failed_Flight
b) Upload_Failed_Customer
3) Exporting ---> a) Information what rows are uploaded
Source Code:
Insert Zflight from Zflight(changing parameter).
If insert failed
RAISE Upload_failed_Flight.
endif.
Insert ZCustomer from ZCustomer(changing parameter).
If insert failed
RAISE Upload_failed_Customer.
endif.
Regards,
Gurpreet
Maybe you are looking for
-
Hi there, am running OSX 10.9.5 Mavericks and for some weeks now, I noticed following very annoying issue: a flash drive plugged into the keyboard's left port is ejected - prompting a warning that the drive was not ejected properly - when I press cer
-
Having problems conecting wireless router to wii
How do you do it?
-
Plan to upgrade phone and plan how do the verizon max plan works
When I try to upgrade on line, when I get to the plan option the Verizon max plan is not there!
-
Music Stream Interrupts - Extremely annoying.
I am having problems streaming music to my 2 airports. It keeps being interrupted every few seconds. Windows XP PC with 1 GB of RAM and a 3GHZ Pentium Processor 6.3 firmware for both airport expresses Itunes 6.0.4.2 The error happens regardless of wh
-
Hi Please tell me what are roles involved for MM senior level consultant?? in which are the are he should be expert?? and what will be the day today activites??