How to trace master data source (table-field)?

Hello All,
Please help, its Urgent!!
I have the following 4 characteristic requirement in BW from PM/PS module.
Master data source (format: table-field)
AFVV-FSAVD - early start date
AFVV-FSEDD - early finish date
AFVV-SSAVD - late start date
AFVV-SSEDD - late finish date
can anyone tell me the procedure, how to find them in R/3 n if there r any standard business content for the same?
Thanks in advance,
JP

Go to RSA5 Tcode in R/3, under SAP R/3 Application component, you can get PO/PS Components, and under that you can get PO-IO/PS-IO Components, here you can check all the vaialble master data datasources.
KJ!!!

Similar Messages

How to trace the data dictionary tables used in the standard transaction

Dear all,
Help me to trace the data dictionary tables used in the standard transaction "crm_dno_monitor". I need to find the tables where the data are stored.
or
Tell me generally how to find the tables used in the standard transaction.
Regards,
Prem

Hi,
Open the program of that standard transaction in object navigator or SE80..
Then click on the dictionary structures tab..
U can find the database tables used in this transaction..
\[removed by moderator\]
Regards,
Rakesh
Edited by: Jan Stallkamp on Jul 29, 2008 5:29 PM

How to rename a Data Source Table?

Hi all,
I need to rename my Data Source table. Is that possible?
Please help me.
Thanks,
Phani

Hi,
I guess you need to change DB Table name and apply that changes to ADF project,If i correct you have to synchronize relevant EOs.
(Right click on Relevant EO --> select Synchronize with Databases...)
http://jdeveloperfaq.blogspot.com/2010_02_01_archive.html

How to create master data source for Profit center group in source system

Profit center group information is available in SAP(T-code:kch3). But, I want to have this information in BW too.
Can anyone tell me how to create a datasource for Profit center group? And which SAP table is able to feed master data for this information?
Many thanks
rajatina.

HI ,
It looks lilke we need to use the FM like 'G_SET_LIST_SELECT' to get the Profit
Here ais note from the forums to get profit center group from table
From Table SETLEAF, Field SETCLASS = '0106'. Field SUBCLASS with controlling area. Profit center in Field VALFROM.
You will get Group name in Field SETNAME.
Regards,
Sathya

How to find active master data source in the bw system

Hi
Can anyone guide me how to find the active master data source in the bw system

Hi,
You can use the table ROOSOURCE. The field ROOSTYPE specifies the type of datasource whether Transaction or attributes or text. You could write an abap program to filter the table and give you only master data datasources.
Assign points if helpful
Regards.

How to compare table data and table field

Hi buddy,
    I have some question about how to compare table data and table field.
   1. I know there is one method:   CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS , it use in unit test to compare the table data(A and B) , you can loop table A into structure A1, then use this mehtod it can compare whether table B contain structure A1. but when I try to use this in main program it will dump.
          CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS(
                                                                                                    LINE    = A1
                                                                                                    TABLE = B ).
       Is there any method or FM can be used to compare the table data ?
    2. I also want to compare two table field , try to find out the different. How to realize this.
Thank you for your sincerely answer.

Hi Zongjie,
What`s the difference, if you using loop A into wa_A, read table B into wa_B with all field, then compare with wa_A and wa_B.
The question 2, seems no standard FM available here.
Loop A into wa_A.
   Loop B into wa_B.
       if wa_A-field1 eq wa_B-field1.
       endif.
        if wa_A-field2 eq wa_B-field2.
       endif.
   endloop.
endloop.
regards,
Archer

How to make Department field in cost centre master data a required field?

Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
Suresh

Hi Sursh
Create a transaction varinat through SHD0.
For the department field, activate the Requred check box field.
Then activate the variant.
Regards
SAP Student

Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.

Hi
Thanks for your reply.
That is Transaction data source. I want master data source.
Thanks,
Mannev.

Which Master data Source (Attr) is available for the field VBUK-GBSTK

Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.

Hi Mannev.
I don't think that you will find GBSTK in any master data source. It is however available in 2LIS_11_VASTH.
Hope it helps.
BR
Stefan

How to delete master data of materials from sap tables

how to delete master data of materials from sap tables...its needed now.
i know its not recommended but still we need to do this. give me the best possible approach.
regards,
suneetha

Hi,
I would suggest you not to write your own code to delete the entries.
BAPI_MATERIAL_DELETE, this would mark all materials selected for deletion. But still the material would exist in SAP.
Another solution: Delete a material manually and in another session execute the transaction SM04. This would display the tables which get locked when you do the operation, Then you can write your own code to delete the material numbers from all the related tables.
Regards
Subramanian

How to extract master data attribute from r/3 to bw give steps details

how to extract master data attribute from r/3 to bw give steps details screenshots

Hi
Go through the below process to extract Master Data Attribute from R/3
Hi,
Maintaining Generic DataSources
Use
Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
Procedure
Creating Generic DataSources
1. Select the DataSource type and specify a technical name.
2. Choose Create.
The screen for creating a generic DataSource appears.
3. Choose the application component to which you want to assign the DataSource.
4. Enter the descriptive texts. You can choose any text.
5. Select the datasets from which you want to fill the generic DataSource.
a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
Notes on Extraction Using SAP Query
After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
For more information about maintaining the InfoSet, see the System Administration documentation.
c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
The data must be transferred by the function module in an interface table E_T_DATA.
Interface Description and Extraction Process
For information about the function library, see the ABAP Workbench: Tools documentation.
d. With texts you also have the option of extracting from fixed values for domains.
6. Maintain the settings for delta transfer, as required.
7. Choose Save.
When performing extraction, note SAP Query: Assigning to a User Group.
Note when extracting from a transparent table or view:
If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
A screen appears on which you can edit the fields of the extraction structure.
8. Edit the DataSource:
○ Selection
When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
○ Hide field
You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
○ Inversion
Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by 1).
○ Field only known in exit
You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
9. Choose DataSource ® Generate.
The DataSource is saved in the source system.
Maintaining Generic DataSources
● Change DataSource
To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
● Delta DataSource
On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
NR

Data Source Tables in SAP BW 3.5

Hello Experts,
I am working on scenario where I need some information regarding data source present in 3.5 version.
I have checked RSDT table but it contains data for data sources present in 7.0 version only.
Please provide list of tables used for data soource and other objects for SAP BW 3.5 version.
Thanks in Advance.
Regards,
Sachin Motgi

Hi Sachin,
Please find the below Data Source tables for BW 3.5
RSTRANFIELD: Mapping of Rule Parameters, Structure Fields
ROOSOURCE: Info about Data Sources and to see how a datasource is extracting the data
RSOLTPSOURCE: list of DataSources by source system
ROOSPRMS : To set the data packet size forData Source
RODELTAM : Record mode
RSDCUBET RSDODSOT RSDIPROIOBJT RSQISETT: for Texts
RSDCUBE: InfoCube
RSDODSO: DSO
RSQISET: INFOSET
RSDDSTAT: Statistics BW data for aggregate selection and query accounting
Hope it helps.
Regards,
Raghu

How to load master data and hierarchies from R/3 systems

HI all,
how to load master data and hierarchies from R/3 systems.
Please explain the steps.
Thanks,
cheta.

HI,
Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
Generally, the control parameters for data transfer from a source system are maintained in extractor
customizing. In extractor customizing, you can access the corresponding source system in the source
system tree of the SAP BW Administrator Workbench by using the context menu.
To display or change the settings for data transfer at source system level, choose Business
Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
limits can be followed.
In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
DataSources. You can determine the size of the data packet, the number of parallel processes for
data transfer and the frequency with which the status IDocs are sent, for every possible update
method for a DataSource.
To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
In this way you can, for example, update transaction data in larger data packets in the PSA. If you
want to update master data in dialog mode, smaller packets ensure faster processing.
Hope this info helps.
Thanks,Ramoji.

Master Data source for sales district or Region in CRM

Dear All,
Please let me know the Master Data source for sales district or Region in CRM.
Thanks
Regards,
Sai

Hi Tiest,
Thanx for responding.
U r right, our clint is upgrading from 4.6 to ECC.
So as per the clients requirements, we are maintaining all the configs for Services in CRM.
Services Data which was in 4.6 is being pulled put on flat files which needs to be loaded in CRM. So middleware would not be able to do this.
What I am looking os some standard upload program.
LSMW recording does not work.
This I-Doc "CRMXIF_COND_REC_SLIM_SAVE_M", i am able to load a single record. But I am not able to find , how to make this function for multiple entries.
IN standard we for loading master data thru I-docs, we map the values to the standard fields which are available in that I-Doc.
But in this particular i-doc, there is a common field for which I need to define the field name and a field value..
Till now, I am only able to define just one field name and a field value.
I want this to word for mutliple entries.
Hope u get my point.
Thanx

How 2 upload Master Data 4 a Info Object in BI 7.

Hi,
I have to load Master Data to a Info Object in BI 7 ( Like Diret Update in 3.5 )
How 2 upload Master Data 4 a Info Object in BI 7.
Dont suggest me to " Insert Characteristic as Data Target".
Points assured.
Thank you.

hi...chk these steps..
Uploading of master data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. Alternatively monitor icon can be used.
hope this helps..

How to trace master data source (table-field)?

Similar Messages

Maybe you are looking for