How to trace the change log for a program ? both local and release versions.

Hi experts,
I encounter a very strange problem.
I changed a program, created a new version TR, , there are three versions before my version which are all have been released.
but there is one sentence which is not added by me, could anyone tell me how to find the reason why the sentence in my version.
Any help would be apprecite!
BR,
Summer

Hi,
Not all the 3 TRs
Goto SE03, Click on Find Requests under Requests/Tasks section.
Give all the 3 requests names in Requests/Tasks, Give User name as *
See any sub tasks are there in the above requests by double clicking on each request.
Or
Goto SE03
Click on Search for Objects in Requests/Tasks under Objects in Requests
Select the first entry  R3TR PROG give the program name.
In below Request/Task Selection , check the status Released.
See what all Requests are displayed, who are all the persons who changed them.
Thanks & Regards
Bala Krishna

Similar Messages

  • How to see the change logs for billing document

    Dears,
    Could you please how to see the change logs for billing document.
    My client is using ECC 6.0 & if i use VF03 > Environment > changes > does not show the changes i had made.
    Thanks in advance
    Ranjan

    hello, friend.
    you should be able to see changes done after the initial creation and saving, by going thru Environment > Changes.  try it again, and this time make sure that changes were done to the billing document prior to posting to accounting.
    normally, when configuration of Billing is done correctly, there will be little or no instances of changing anything in the Billing document,  as saving the document after creation will post this to Accounting.  of course, inclusion of a posting block in the billing type will provide you the opportunity for changes. 
    regards.

  • How to check and delete the change logs for DSO

    Hello All,
    I have build a process chain that will delete the change logs for DSO prior to 7 days but when i executed it, the number of entries are still the same within DSO.
    Then i tried deleting directly from "Environment" menu from DSO maintainance but does not work. Can anyone please explain how to resolve this issue or the proper process of deleting the change logs. Appreciated.
    Thanks,
    M

    Hi
    Check out the below two articles
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/1058b68f-96c4-2d10-fbb1-de8757ca6a58?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a02ba9e7-bb6f-2c10-09b4-e86b9fcbad41?QuickLink=index&overridelayout=true
    Regards,
    Venkatesh

  • How to use the change log in ODS to track Delta change?

    People say that historical data (like Delta change) in ODS can be tracked in the Change Log.  How to use the change log to track historic data?
    Thanks

    Kevin
    See if it helps
    Every ODS object is represented on the database by three transparent tables:
    Active data: A table containing the active data (A table)
    Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
    <b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
    An exception is the transactional ODS object, which is only made up of the active data table.
    The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the table’s structure. They have the request ID, package ID and the record number as a key.
    Data base structure changes
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
    Hope this helps
    Thnaks
    Sat

  • Confition type FRC1- how to get the change log,

    Hi,
    When  the condition type FRC1 automatically gets deleted (deletion flag),. and we are not able to see the change log for the same.
    how the Conditions are deleted. Or if at all any one has deleted, how to get the change log,

    Check in
    m/06
    go to utilities
    change log
    If not found  consult BASIS consultant

  • How to see the changes made for iPad in iTunes on my iPad?

    How to see the changes made for iPad in iTunes on my iPad? I've been transferring some pdf-files and changed the name on them in iTunes under the index books for my iPad device, but the changes do not show in iBooks-PDF. What to do?

    Yes I tried syncing a lot of times, but the changes still wouldn't show, so I did as you said by beginning from the start by adding the PDF's once again.
    Thanks for your help, it works now :-)

  • Configure the Change Log for the activity

    Hi to all,
    I would like to know if it is possible to configure the "change log" for the activity.
    Thanks in advanced,
    Matte

    Carlos,
    Can you be more specific on the term 'Configure'.  Change log is automatically generated by SBO.  The only thing you can change is the numbers of Historical instances of the log
    Administration > System Initialization > General Settings.......Services Tab...History or Log Settings.  Be default it is 99 instances.
    Suda

  • How to update the change log table?

    Hi
    I am doing some manipulation on the ODS records and writing few new records directly into the active table of my ODS. how do i update the change log table so that i can do a delta from my ODS to further data targets??
    i see the fields REQUEST, DATAPAKID, PARTNO and RECORD in the change log table. what values should these fields have for my new records??
    Regards
    Sujai

    Hi,
    Please try this option. In stead of writing directly into DSO, do it in another Custom Z DSO. From there, do the FULL load to your previous DSO. This will ensure that the data consistence through the system. Also, do not forget to delete the data from Custom Z DSO once you successfully loaded the data.
    Thanks,
    Saru
    Edited by: P. Saravana Kumar on Apr 1, 2009 6:23 PM

  • How do we chcek change Logs for any stndrd transaction

    Hi gurus,
    Are there any tables to check change Logs for any SAp standard t-code ?
    Thanks
    Kylie

    ALex ,
    For eg :if its a t-code related to Purchasing : then Purchase Order and it's corresponding item level details are retrieved.
    But i m thinking in a different way: i need to check LOGS of a t-code which might have a transport request
    following such a transport request i can get the USER details who migrtaed the changes of t-code (for eg:ME23n)
    from SAP QA to SAP PROD.
    Thanx
    Kylie
    Edited by: kylietisha on May 31, 2010 8:15 AM

  • How to tace the change no for a certain BOM?

    I have a BOM(bill of material).and from time to time,engineer like to change the BOM by using "Change Number" ,so it is clear in the menu of T.C cs03, you can find the "change no.",but this T.C is only down to the second lower level and not down to the lowest level,
    For me, I want to export the whole BOM out and with change no. attached,then I can trace all change no. for this BOM
    Any advices are welcome
    helai

    Dear helai,
    Your question is not clear,can you please clearly explain what are you looking in using Change number?
    1.Using a Change number you can make BOM changes at single level in CS02.
    2.Same Change number can be used for making various material's BOM changes.
    3.If it's a Change number with release key,once if the release key is set for the change number ,then that
    change number cannot be used for making any BOM changes.
    4.Before setting the release key you can use the same change number for various BOM corrections.
    5.For reports check using T codes CC04,CC05,CC07.
    Please check & revert back if you need any further assistance.
    Regards
    Mangalraj.S

  • How to trace the changes done through transaction R3AC3

    Hello SAPheads
    Is there any table are any transaction through which i can trace the changes done through r3ac1,  r3ac3 , r3ac5 ?
    Thank you
    Somasundaram Ganesh

    did u find anything on this. If yes, plz share d same.

  • How to see the changed output for purchase order

    Hi..
    I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
    Edited by: Meena 303 on May 1, 2008 6:24 PM

    Hi
      In ME22N go to message -
    > select old message -
    >click change OutPut button -
    > Save
    then see print priview  through ME9F or ME22N it sself.
    regards
    Sachin

  • How to track the session Logs ( SM35) in program

    Hi,
    I want to track the SM35 logs in my program. Using log information i want to move the filure records, Success records and warning  records spearately in my internal tabel.
    Based on that iinforamtion i want to analysis the records again for upload......Please help me.
    Thanks & regards
    Santhosh

    The actual requirment is, i want to get back the error records in my program.....My program is running in back end once the session is over i need to get the error files back to my program. That file i want to store in comman folder....
    after the session complet i want to get the error records in my program.....any bapi or functional module or methods is available for get the log information.....
    Help me....Please....
    santhosh

  • How to trace the changes made by other user in portal

    Hi All,
    Actually i have a requirement like, some body has done some changes in Development server how to trace those chnages in portals or Visual Admin (who is the user and what are all the objects that got changed) .
    Actually our development system , Quality and Production systems are working fine till yesterday but when we logon to the dev, qua, prd systems today there are some changes and some of the things are not working client was asking us whether we have done some canges if not who has done the changes.
    Is there any place where all these changes can be recorded (likes who is the user and changes ....) or traced like log files or any thing else
    Can any one help me out in this regard.
    Thanks & Regards,
    Ramesh.

    Hi ,
    As you told some changes identified. so navigate to corresponnding portal obejcts and find modified and last changed by similar properties in the property editor object.
    portal activity reports gives how many users visted specific pcd object but not who visited. You can use pcd filter to compare properties.
    Regards,
    Koti Reddy

  • How to stop the changes made for the BP in CRM not to update in R/3

    Hello Gurus''
    we are in need of help......i have an issue...the issue is
    Wht ever the changes we do in crm , need to be not updated in r/3 ....for example if we change the the language for the BP 100 in CRM, it should not update in R/3
    Where as in our case the data is updateing in R/3
    Here by requesting you all to help me out how to stop the updaation of some changes  which are made in CRM , that should not be in R/3
    Point will be given......
    Regards
    sreeram Raghu

    Hello
    Thanks for ur reply.........
    We have the following business process
    We create BP with role prospect in CRM, once the prospect is ready to buy the product we conver the prospet in to customer and thesame  customer is replicated in R/3 fro sales.
    What i am looking at is for the customer we created in CRM if we change any data that should be updated in r/3..it may be nay like name address ...language....etc.....
    can u help me out...as u told me to unassig/delete the subcription:All Business partner(MESG) under that we have --
    >publication>All BP(MESG)->Replication object-->Bupa_Main
    >Sites-->SQ1_300
    If we do this process does the issue will fix or else we need to do soem thing more...
    Thanks in advance
    Regards
    Sreeram Raghu
    +91-99 94 94 82 72

Maybe you are looking for

  • "pwpolicy" -- does it not work on newly created accounts?

    Simple question... I wanted to set up "pwpolicy" to force user accounts to have a "minChars" setting for their passwords. However, this only seems to kick in when users change their passwords -- not when the password are originally set for a newly cr

  • Need help installing PhotoShop 7 on new PC

    Error message "scratch disk full"won't let me install it. It is NOT full...it's a brand new 2T hard drive. I don't want to have to partition the hard drive. Any other way around this?

  • Mac Pro runs very slow, any apps, accessing finder spinning ball

    For the past 3-4 months my Mac Pro is slowing down to about 2 to 3 times slower This is across the board no mater if it is an application or opening a finder window I made a new volume and a new install , no 3rd party apps just what was on the disk a

  • How do I set CUP to display the different request types user-interface?

    How do set CUP to default into the initial Request Access screen with request links? The one that lists different request types for end-user to click on the link of the preferred request type? I am running GRC 5.3  and when I click on CUP from the la

  • 32-bit specific JRE offline install error

    I originally posted this for silent installs, but it turns out this is a general error. This has been occurring since 24 and is still not fixed in 27. Google searches have been futile. Again I have no access to image hosting sites, so here is a link