How to trace the EVENT's source which triggers the process chain

hello Friends,
I am currently involved in a new project, which does'nt have any documentation of the system. There is a process chain which is triggered by the event ( say..... "BI_START") and it gets triggered every day night,.......
But the problem I have is, I could'nt trace where this EVENT gets triggered....
Can you please advice me how to trace plz...... Thanks very much for your time.....
Thanks,

Check in SM37 or in the tables TBTCO or TBTCP with below selected fields.
JOBNAME = Background job name
SDLSTRTDT = Planned Start Date for Background Job
SDLSTRTTM = Planned start time for background Job
SDLUNAME = Initiator of job/step scheduling
PRDMINS = Duration period (in minutes) for a batch job
PRDHOURS = Duration period (in hours) for a batch job
PRDDAYS = Duration (in days) of DBA action
PRDWEEKS = Duration period (in weeks) for a batch job
PRDMONTHS = Duration period (in months) for a batch job
PERIODIC = Periodic jobs indicator ('X')
STATUS = State of Background Job, S = Released, F = Finished
AUTHCKMAN = Background client for authorization check
EVENTID = Background Processing Event
EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)

Similar Messages

How long CSS blocks flow, from source which detected as source DoS?

My application generates except normal flow, flow which CSS treats as DoS attack. Both flows have the same source.
I am afraid that, CSS can block proper flow.
So, I have question: how long CSS blocks flow, from source which detected as source DoS?
Krzysztof

I am not very sure of the lenghth of time that it blocks the flow from the source, if it is considered as a source of DoS attack, but the workaround would be to bypass the cache for that particular source, since you are already aware that it might cause a problem. You could use a bypass rule to do so. You can also use the flow timeout feature with the flow port[1|2|3|4|5|6|7|8|9|10] timeout command to configure a flow timeout value for a TCP or UDP port. I am not very sure if this feature would help in your situation, bypass seems to be a better option.

How do you get the Event folder date to match the media dates in FCPX

Modifying the clip date/time with the Modify command works fine ... but the Event itself still has the date the event was created, not the date of the media that it contains.
If tried using Touch on the Event folder but FCPX ignores it.
Any ideas on how to get the Event folder date to match the media dates (or set to any other date desired) so that Events sorted by date show the actual dates of the media that they contain?
Thanks
Jonathan

Here is the texture I've been manipulating all afternoon to try and achieve the looks i want.
and when I put this texture over the top of other images and select Multiply, and adjusted the opacity, this is what i get....
Now this kinda works?? but it still looks not as good on an asian person.
Thanks by the way to everyone for all the tips, I really really appriciate it and more suggestions for improvments are welcome!

How to get the number of page which exists the change bar ?

In FDK development, I want to find the number of page which exists the change bar.

zhaopeng,
You can get the page number by querying the FP_PageNum property of the FO_Page object:
pageNum = F_ApiGetInt(docId, pageId, FP_PageNum);
...or you can use FP_PageNumString if you are using string page numbers.
If you do not have the ID of the FO_Page object, you can get it from the paragraph ID using the following function, courtesy of Rick Quatro, posted to the Yahoo Framedev list. Send the paragraph (FO_Pgf) ID as oObj and it will return the page ID:
F_ObjHandleT GetPage(F_ObjHandleT oDoc, F_ObjHandleT oObj)
F_ObjHandleT oFrame = 0;
IntT iObjType;
F_ObjHandleT oRow, oCell;
while(oObj)
oFrame = oObj;
iObjType = F_ApiGetObjectType(oDoc, oObj);
switch(iObjType){
case FO_SubCol:
oObj = F_ApiGetId(oDoc, oObj, FP_ParentTextFrame);
break;
case FO_Tbl:
oRow = F_ApiGetId(oDoc, oObj, FP_FirstRowInTbl);
oCell = F_ApiGetId(oDoc, oRow, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Row:
oCell = F_ApiGetId(oDoc, oObj, FP_FirstCellInRow);
oObj = oCell;
break;
case FO_Cell:
// handle FO_Pgf case
case FO_Pgf:
// handle FO_AFrame case
case FO_AFrame:
oObj = F_ApiGetId(oDoc, oObj, FP_InTextFrame);
break;
// handle graphic object cases
case FO_TextLine:
case FO_TextFrame:
case FO_UnanchoredFrame:
case FO_Arc:
case FO_Ellipse:
case FO_Group:
case FO_Inset:
case FO_Line:
case FO_Math:
case FO_Polygon:
case FO_Polyline:
case FO_Rectangle:
case FO_RoundRect:
oObj = F_ApiGetId(oDoc, oObj, FP_FrameParent);
break;
default:
// prevents loop if unknown object type is found.
oObj = 0;
break;
if(oFrame){
// Use FP_PageFramePage to get the page identifier of the object.
return (F_ApiGetId(oDoc, oFrame, FP_PageFramePage));
else
return(0);
Russ

In downloading my Events from iPhoto on my Mac to my iPad Air, the Events arrive in the proper order but not showing the Key Photo. At the same time, the Events arrive in iPhoto on the iPad in totally random order but showing the Key Photo.Why?

In downloading my Events from iPhoto on my Mac to my Ipad Air, the Events arrive in Photos in the correct order but not showing the Key photo. At the same time, the Events arrive in iPhoto in a totally random order but with the Key phto showing. Why? of course and is there a way to shift the order in Iphoto and get a Key photo in Photos?

HHi, thank you for the reply. I have checked my iPad and iPhone and neither has iCloud Photo Library (Beta) enabled. Turned off in both. Photostream is turned on.
i tried to sort it out by dragging all the photos to Events on the Mac and then deleting them from iCloud - (left hand side of iPhoto under the section 'Shared'). the photos now show up in Events. I did force quit but the issue remains. The message reads ' photos are bing imported to the library. Please wait for import to complete.'
i can't empty iPhoto trash either. The message read "Delete error. Please wait for import to complete.'
WHen I was moving the photos to the Events I always had a message about duplicates - to the effect that the photos already existed, did I want to import them? I clicked on Yes, import all duplicates. But when it showed the images - duplicates side by side - one showed the photo and the other was blank.
I really don't know what to do! And I don't know how to handle my iOS devices. Is it to do with the large number of photos? Any help, advice appreciated.

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this ang get my all imported folder back?

I have been using the apple IPad camera connection kit and my photos can be viewed in the events... But the all imported folder is no longer there and the last import folder is empty. Is there any way to resolve this and get my all imported folder back? as well as get my last import functioning normally?

Please please help me, if you know how.

HT5620 I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.

I want to change the email address to which all the reset security information (emails) go to. But I cannot see that email address in the list when I click on the 'Name, ID and Email Addresses' section.
How can I change it when I cannot view it on my account. I am not even sure how this got setup.

If you mean your rescue email address, it's in the Passwords and Security section, after you answer the two security questions.

HT5219 Do you need a Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

Do you need or is there a specific Thunderbolt 2 Cable to get the speed out of a Thunderbolt 2 Port? Or is there just one kind of Thunderbolt cable, and its the Thunderbolt 2 port which determines the speed?

Hi XChip73,
The links below will answer your questions about specific cable needs for Thunderbolt 2 and how the speed is determined.
Apple - Thunderbolt: Next-generation high-speed I/O technology.
Apple Thunderbolt cables and adapters - Apple Support
Cheers,
-Jason

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It

When I sign in to the Adobe Reader XI (which is the only option that I have to open a pdf document, I will sign in to the Adobe ID sign-in page. After I do this, the "Convert To" box goes "gray" and I am unable to convert the document I have selected. It was working great for the first week that I used it, but now it doesn't give me the converting option. I am very frustrated as I have done nothing to change anything, and I was thinking this was so great...now I am just pulling out my hair and do not have the option of calling anyone since no phone numbers are listed. I am VERY busy and do not have time to sit and wait over a half an hour to "chat", which I tried to do yesterday. All I want to do is very simply, convert pdfs to Word. I have paid for this and am not getting any help. I am not very savvy when it comes to Adobe this program and Adobe that program...I feel I am being scammed as I do not get simple answers for something that appeared was going to be simple. You can't even call customer service to talk to someone live to help walk you through.

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.

We developed a SSIS Package to pull the data From Oracle source to Sql Server 2012. Here we used ADO.Net source to pull the records from Source but getting the below error after pulling some 40K records.
[ADO NET Source [2]] Error: The ADO NET Source was unable to process the data. ORA-64203: Destination buffer too small to hold CLOB data after character set conversion.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED.
The PrimeOutput method on ADO NET Source returned error code 0xC02090F5.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component,
but the error is fatal and the pipeline stopped executing.
There may be error messages posted before this with more
information about the failure.
Anything that we can do to fix this?

Hi,
Tried both....
* Having schema type as Nvarchar(max). - Getting the same error.
* Instead of ADO.Net Source used OLEDB Source with driver as " Oracle Provide for OLE DB" Getting error as below.
[OLE DB Source [478]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure
code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the
failure.
Additional Info:
* Here the Source task is getting failed not the conversion or destination task.
Thanks,
Loganathan A.

When I connect my iPod touch to my computer, I have a list of Events on my iTunes/iPod/Photos. I want to erase these Events. However, the photos are NOT on my MacBook Air. When I check one of the Events and then hit Apply, the photos appear on my iPod.

When I connect my iPod touch to my computer, I have a list of Events on my iTunes-iPod-Photos. I want to erase these Events. However, the photos are NOT on my MacBook Air-iPhoto. When I check one of the Events and then hit Apply, the photos appear on my iPod. And one last thing: When I connect the iPod and open iPhoto, iPhoto tries to load New Photos (I think), but nothing happens. Any ideas?

Resolved.

I live in Saudi Arabia and intend to buy an iPhone 5 (unlocked version) from U.K. I want to know, would it be possible to claim warranty from the local network operator which is the official Apple iPhone seller i.e. Mobily. Would they repair/replace ?

I live in Saudi Arabia and intend to buy an iPhone 5 (unlocked version) from U.K. I want to know, would it be possible to claim warranty from the local network operator which is the official Apple iPhone seller i.e. Mobily. Would they repair/replace my iPhone 5 ?

You would need to return to U.K. for warranty service. The iPhone warranty is not international.

Where is the event options in iPhoto with the new iOS 7 update on iPad?

Where is the event options in iPhoto with the new iOS 7 update on iPad?

You mean iPhoto the app or the native iOS Photos app?
I have both in my iPad running iOS7 and iPhoto has the Events as usual.

When downloading from my PD 150 to the event window in my iMac the clips are out of order and split into many subclips ac iMac the clips in the

when downloading from my PD 150 to the event window in my iMovie the clips are out of order and split into many subclips. Very frustrating

Nevermind, somehow it's magically back in order.

I was on ios 6 beta version...then i restore my ipod to the 5.1.1, which is the latest version...now i m receiving the error in the icloud that "the last backup could not be completed"....so what i do....????

i was on ios 6 beta version...then i restore my ipod to the 5.1.1, which is the latest version...now i m receiving the error in the icloud that "the last backup could not be completed"....so what i do....????

You're obviously a developer. Repost your question in the developer's forum.

How to trace the EVENT's source which triggers the process chain

Similar Messages

Maybe you are looking for