How to ?...:Tracing causes of a status getting inactive..

I have encounterd this problem. A billing request was created for a service order. The Staus PTBL should have been set . On further checking, a find that the staus was mande in active . Is there any way to find the source that made this PTBL status inactive?

Hi,
Lock the report to a new transport request from SE09/10 transaction and try to generate the same,
Hope this helps,
Rgds,

Similar Messages

How do I cause a form field to raise its blur event?

I have a web form that displays an editable pdf document. When a user clicks a button the form will get validated. If one of the fields being validated has the focus its value will not get updated when I need to do the validation. For example, if I am validating the First Name field and I type text in it and then click on a button (from the web) to cause validation, the document says the field is invalid because there is no data. If I hit tab on the field to focus a new field the validation works fine. How can I cause the field to get updated? I have tried to create an empty form field and focus to that first but that does not work.

Nope, I have a button on the website that the user clicks to send a validation request.

How can I change the asset status in the Fixed Assets Addon?

Hi All,
I installed SAP Fixed assets addon in our customer, and I have imported the fixed assets.
There are assets which book values are 0, but the asset status is active.
How can I change this assets status to inactive?
I
My SBO version is SBO 2007A SP1 Patch 05.
Thanks: Veronika

Dear All,
Thanks for your answers. I have managed to solve this problem.
Now I have another problem, but I will create a new message about it.
Thanks: Vera

How to turn off my phone app witout havin da phone cause it gone 2 get fixed

How to turn off my find my phone app witout havin my phone cause its gone 2 get fixed

Read here:
http://support.apple.com/kb/ph2702

I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

I had an App on MacBook Air which would cause my computer to be locked. I delted it and reinstalled the App again from the AppStore. Now I am being charged again for the same App. How can I correct this issue and get refund for the double billing?

You can't gift it, gifting can only be done from within the store, not from within your library.
Puchases are considered final but you can try the 'report a problem' link to contact iTunes Support and see if they will refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

HT1918 How do I change my acct to get rid of credit card info altogether and operate with none status?

How do I change my acct to get rid of credit card info altogether and operate with none status?

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

How to monitor OSD TS failure and get alert or report?

How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTech

Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon

How do I use Migration Assistant to get my Mail and Keychain settings from

How do I use Migration Assistant to get my Mail and Keychain settings from my Power Mac G5 2.3Ghz? I just purchased a new 2.5 MacBook Pro which will be delivered tomorrow, and I want to to know how to transfer Mail and Keychain?
Thank You in advance for your reading and replying.
Kindest Regards,
Sebastian

Rather than using Migration Assistant, which can cause trouble with the PPC to Intel change, simply boot the G5 in FireWire target disk mode and manually transfer the following:
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/com.apple.mail.plist
You might want to look over Kappy's helpful guide for migrating, which covers the full process for a manual migration (including the above files).
Hope this helps...

How do I select multiple files under "Get File Info"and lock or unlock all?

How do I select multiple files under "Get File Info"and lock or unlock them all? It seems to do it automatically when I have 10 or more selected. But how do I lock or unlock 5 or 6 files in one swoop? Thanks

Select the desired files then press OPTION and select Show Inspector from the Finder's File menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Have updated firefox and my e-mail at terra.es has disappeared .with no mail shown or history.how can i recover my mail or get back to original firefox. am on windows 7.

have updated firefox and my e-mail at terra.es has disappeared .with no mail shown or history.how can i recover my mail or get back to original firefox. am on windows 7.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]

How to turn back a kanban status ?

Hello !
I have a Kanban sequence with these status :
EMPTY --> PROCESS --> IN TRANSIT --> FULL
If, for any reason, I change a kanban from status PROCESS to IN TRANSIT incorrectly, how can I turn back the status to PROCESS ?
SAP always returns an error "The mandatory status FULL cannot be ignored" !
Thanks a lot.
Mauro.

I don't think that you can go back in the sequence. Just move ahead in the sequence to get to the desired status again. Of course, you may have to correct/reverse some undesired postings because of that.

I downloaded Montain Lion several times. I could not install. It said `could not be verified or corrupted'. How to solve this? Can I get a refund?

I downloaded Montain Lion several times. I could not install. It said `could not be verified or corrupted'. How to solve this? Can I get a refund?

On your profile, you say that you are using Mountain Lion. Is that correct? If you are using Mountain Lion, you don't have to download the Mountain Lion installer again.
Also, that error is usually caused by problems with your Internet connection or your hard disk, so first, open Disk Utility, select Macintosh HD in the sidebar and verify the disk. If it's OK, you have problems with your Internet connection, so contact with your ISP

Emp seperation report (How can I get inactive emp separately)

Hi.. Frdzs,
We have employee separation report in this my client requirement is he want to generate inacive (status) separately, regarding this I have taken STATUS as out field but through this I'm getting all status (acive, Inactive, etc).
So, pls let me know how can I get employees report status wise.
Awaiting for ur reply.
$Lakshmi

Hi,
Have you selected the Value 1 in the Employee Status field. Then definetly, you will get the Employee list who are all in the Inactive State.
Good Luck
Om
Reward it, if u feel helpful.

IPod frozen than working... how to check it's health status?

A friend of mine gave me a 20GB classic iPod, it was supposed to be broken, took it home, connected to the usb cable and the icon to get to service it showed up, nothing else to do, no way to access diagnostics, nothing nothing nothing.
Now, connected again to my old Dual MDD it mounted on the desktop and seems to work, what and how do I check its health status?
It would turn very useful for me to have this thing to work so much that I already thought, in case it was the disc, to change it but now how do I get to make sure it doesn't fail again?
Could it be a battery problem?
thanks all for your attention
Giovanni
<Edited by Host>

BTW, I did SMC and PRAM reset and it was the same in Lion when I bought the MBPR. It was working for days until I started noticing disconnect and reconnect iPhone 4S.

TS1424 i bought a book and itunes charged me three times for the same book, how do i submit a claim to get the money back and where do i find then form

i bought a book and itunes charged me three times for the same book, how do i submit a claim to get the money back and where do i find then form

Welcome to the Apple community.
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

How to ?...:Tracing causes of a status getting inactive..

Similar Messages

Maybe you are looking for