How to track a status of release w.r.t PR and rel. group and rrel.code?

Hi guys,
We have configured release strategy( Over all release stragey) for a particular PR type..
We have two issues..
1. We want to track the dates of different release status..Like when first level release and when second release happened and so on..From which table we can get this information..
2. We want to have release stragegy through work flow..The requirement is particular group PR should be go to one particular user for approval and once he approves later all PRs should go to one user for approval..
i.e. 1.Specific users PR should go to specific user for first level approval..Here mulity user for first level approval.
2. First level approval is over final approval should go to one specific user for final approval..Here only one user for approval.
Can anyone suggest something on this..
regards,
Sundar..

Hi,
For both of your requirement you have configure the WORKFLOW for release strategy for P.O (or) P.R.
Please consult your SAP ABAP team they will do the config for the W/F (Workflow)
In that only you have first release date and second release date. In std release of P.O this cannot be achieved.
G.Ganesh Kumar

Similar Messages

What is meant by article grouping and site grouping and how to define

what is meant by article grouping and site grouping and how to define in SAP.

Hi Charan,
Article Grouping in its broader sense means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
For more information refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
Some of the Txn codes -
WB50 - Site Group,Create Alloc,.table
Wb56 - Site Group, Alloc.table,Maintain Sites in Class
WB60 - Site Group,Create Promotions
WB64 - Site Group,Maintain SItes to Class
Wb80 - Create Site Group Other
For more information,refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Hope it helps
Rgds,
Aram K.
For more information refer to the link below

How to track repair status.

I sent in my newly purchased S230U for repair to a depot (flextronics?) located in Newmarket, Toronto, Canada. I was given the "case number" of A0XXFVH. Now, how do I track the status of the repair? EasyServ website does not recognize the case number. Can anyone help please!

Hi, trhbme1
I believe I can help you with this. Can you send me a private message containing your serial number and any other relevant information? With this, I can look up your machine and tell you the progress of the system thus far.
Thanks in advance,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

How to retire/archive/status a released workbench transport for an OSS note

My Question: Is there a best practice for the "retiring" or "archiving" or "statusing" of released workbench transports for OSS notes that have been imported into the quality environment, but should never be imported into the production environment?
For example an OSS note is applied and imported into QS1, but then a CRT Hotpack is applied as an entire patch upgrade, so that the prior individual transport is no longer needed. Best Business practice indicates to not delete a released transport, but unless there is a way to permanently segregate them from the remaining legitimately viable transports, there is always a risk that the "stale" code could inadvertently slip through thus overwriting good code.

Hello.
Well, you have confirmed what I suspected when I read the descriptions - wrong forum.
I chuckled and couldn't stop a broad smile from creeping across my face when I read your response though: "the old BASIS type questions". I knew we were a bit behind the times here; you have definitely confirmed this suspicion.
Thank you again. I'll try another search of the OSS notes or put in a customer message just for the heck of it.

How to export "Managed by" field of Distribution and Security groups and import with new values? (Exchange 2010, AD 2003)

My Active Directory environment is 2003 functional level and we have Exchange 2010.
I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
2010 can be used with "get-distribution" but as our AD environment is 2003 is this correct also?
Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
Not really sure that the best way to go about this is.
Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
existing managedby values with new ones. In some cases we have multiple users as the owners.
Appreciate any advice on how this can be best achieved. Thank you.

Hi,
We can use the following command in Exchange 2010 to export "Managed by" field of Distribution and Security groups:
Get-DistributionGroup | Select-object Name,@{label="ManagedBy";expression={[string]::join(“;”,$_.managedby)}},Primarysmtpaddress | Export-Csv
C:\export.csv
After you changed the Managed by field in export.csv and saved it as a new file named import.csv, we can run the following command to set with new value:
Import-Csv C:\import.csv | Foreach-Object{ Set-DistributionGroup –Identity $_.Name –ManagedBy $_.ManagedBy}
Hope it works.
Thanks,
Winnie Liang
TechNet Community Support

How to export "Managed by" field of Distribution and Security groups and import with new values?

My Active Directory environment is 2003 functional level and we have Exchange 2010.
I am trying to find out the best way to do a mass edit for the "Managed by" values of our security and distribution groups.
I know we can export the "managed by" field by csvde but I am not sure this is the correct way to do it. Also in the case that there are multiple users assigned to be managing a distribution group it only shows one value. Also powershell from Exchange
2010 can be used with "get-distribution" but as our AD envronment is 2003 is this correct also?
Finally once the data is exported to csv can it be edited to then reimport and udpate the existing group managed by fields with new values?
Not really sure that the best way to go about this is.
Summary - We have 2003 AD with Exchange 2010 and I am trying to export a list of all our Distribution/Security groups showing the group name and managedby values so we can edit and update the
existing managedby values with new ones.
Appreciate any advice on how this can be best achieved. Thank you.

Hi Barkley,
You can also refer to Official Scripting Guys forum to get a script solution:
http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG&filter=alltypes&sort=lastpostdesc
Best Regards,
Amy Wang

How to change Contract Status to Release from Held

Hello SRM Guru,
We are on SRM 5.0. In our production system we have some contract (GOA) which were not automatically trasnferring to backend when we release it (After approval). They are in held status only so we transfer them by FM BBP_pd_CTR_Transfer. But in SRM still the GOA status is held. Could you please suggets how (any table) can I schange contract (GOA) status from held to release manully.
Thanks,

Hi
You can manually change the status of contract from held to released status using FM 'CRM_STATUS_UPDATE'. Enter your status parameters in structure JEST_INS and execute the FM.
Regards,
Sanjeev

How can multiple addressees on an incoming email message be captured as a group and saved

either as a word doc or saved into my address book

Install [https://freeshell.de//~kaosmos/morecols-en.html MoreFunctionsForAddressBook] ([http://chrisramsden.vfast.co.uk/3_How_to_install_Add-ons_in_Thunderbird.html How to install]), then right-click an address in the Header Pane, select 'Save recipients addresses', and choose 'as contacts' or 'as list', to save to an address book or mailing list, respectively.

How to Track IP Address on audit

Hi,
Anyone can help me??In production database one generic account with DBA privs,performing DML activities.But we do know who is performing it.Can anyone knows how to track IP address with the Userid.

write a logon befroe[sic] trigger and capture the IP
I'd like to see a before logon trigger. I hear they are pretty rare. But my real question is this: how does the trigger know that you're going to logon? What if you change your mind at the last second but the trigger has already fired? Oops?

How to find system status for production orders?

How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guide

Hi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva

How to set the status for a customer plan to RELEASED.

Hello all,
I created a program for mass creation of customer plans. But after the creation of a plan, the status should be set to released, so that the user can go about creating the trade promotions for the customer plan. Can anybody tell me how to set the status of a customer plan to RELEASED.
Thanks,
Disha.

Hi Clemens,
I am not talking about doing it in the CRM_UI transaction..I created a program..which would create the customer plans based on the planning account data provided. I was succesfull in creating the plans, but I am not knowing how to release it, if only anybody can tell me about a Function module or method, which can help me do this, that would be great
Thanks,
Disha.

How processing status "In Release " is set in purchase requisitions

Hi Experts,
How processing status, iun release is set in item details (Status tab page) of purchase requisition, also is it possible that release status is "release completed" even requisition is not subject to release strategy.
how release active is set.
Thank you
Anand

Hi
The Stauses in the PR will be active opnly if you have the release strategy setup for the PR.
"In release" is set when the PR is created & is subjected to approval & in the approval process.
Relased is set when the PR is approved fianlly.
Thanks & Regards
Kishore

How to track Transport request released

hi Experts,
How to track Transport request released from one development system (D01)to another
development (D02).
is there any way we get know .
Amit

Hi,
       From SE09 & SE10 you track the transport requests, and even you can find the transport request details from the following database tables.
E070                             Change & Transport System: Header of Requests/Tasks
E070A                            Change & Transport System: Attributes of a Request
E070CREATE                       Change & Transport System: Creation Date of Request
E070DEP                          Change & Transport System: Dependencies of Requests
E071                             Change & Transport System: Object Entries of Requests/Tasks
E071C                            Change & Transport System: Client-Specific Lock Flag
E071E                            Lang. Transport: Positive List for Generic Object Selection
E071K                            Change & Transport System: Key Entries of Requests/Tasks
E071KC                           Change & Transport System: Key Entries of Requests/Tasks
E071KF                           Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071KFINI                        Change & Transport System: Nametab Info. on (CHAR)Key Fields
E071K_30                         Change & Transport System: Key Entries of Requests/Tasks
E07T                             Change & Transport System: Short Texts for Requests/Tasks

How to track Delivery and Read Receipts, to update the e-mail status?

Hi,
I got bit confused, How can I came to know that my e-mail has been successfully sent or not without opening my inbox.
Am sending 50,000 mails per day by using java mail sending program, while sending I am enabled Delivery and Read receipt and I saved message-id in database and I got that receipt back to my inbox.
Then I am reading my Inbox using another java program based on message-id concept, And also I need to parse the body of the mail to update the reason if any message failed.
Here my Inbox received more than 1 lac mails per day as receipts. Because am sending 50,000 mails, So, I got 2 receipt mails for 1 mail, totally 50,000*2=1lac mails in Inbox. My problem is, my reading Inbox java program not able read all 1lac mails at one day. It just reading 5,000 mails per day. When my next day mail sending process started, again i am getting another 1 lac receipts.
Since I am not able to read and delete the receipts completely, mail counts in my inbox getting accumulated. So, I got stuck, How can I do this?
If anybody have any other ideas please share with me.
Already I surfed on net lot, but I can`t find solution for this concept.
Thanks in advance.

Hi EJP,
step 2: Taking total inbox length using message.length
The message count is available via Folder.getMessageCount*().//ok I will try this one.*
step 3: In for loop, for(i=0; i < = n; i+){+ //--here we are getting mails one by one
That should be i < n, not i <= n. *//here I was wrongly specified, I used i<n only.*
step 5: In that mail body we are searching our own unique keyword(which we set for our unique mail reference)
Searching how?
In order to find the keyword, we are getting entire text/plain mail body using below method,
//To get body plain/text body part start here
     public static void getTextPlainBodyPart(Part p) throws Exception {
          if (p.isMimeType("text/plain")) {
               if (!(showStructure) && !(saveAttachments)){
                   lstr = (String)p.getContent();
          }else if (p.isMimeType("multipart/*")) {
             Multipart mp = (Multipart)p.getContent();
             level++;
              int count = mp.getCount();
              for (int i = 0; i < count; i++){
             getTextPlainBodyPart(mp.getBodyPart(i));
              level--;
//To get body plain/text body part end hereAbove method will return entire body of the mail in one string variable, Eg: String mailBody;(*mailBody variable contains entire body)*
Then using mailBody variable we are searching our own keyword(which we set for our unique mail reference while sending mail) using below technique,
if(lstr.indexOf("!$*#*$") != -1 && lstr.lastIndexOf("$*#*$!") != -1){
KeyWord = lstr.substring(lstr.indexOf("!$*#*$")+3,lstr.lastIndexOf("$*#*$!"));
//to get reason alone
if(lstr.contains("Reason:")){
     Pattern p = Pattern.compile("Reason:\\s([^\\n])*");
Matcher m = p.matcher(lstr);
boolean result = m.find();
     while(result) {
        reason = m.group();
         result = m.find();
//System.out.println("Reason:>>>>"+reason);
}else{
     reason = "";
}After getting that keyword in KeyWord variable,
then we are updating our database using that KeyWord,(here we are using KeyWord variable in where condition in update query)
Note:_ KeyWord is nothing but, we were stored all our unique keyword against every mails while sending.So, If when get that keyword while reading the receipts,then we can update our table using that same keyword.
guide how can I do this effieciently. And if you any other new concept please share with me.
Thanks in advance..
Edited by: EJP on 17/03/2011 16:54: added code tags. Please use them. Code is 100% illegible otherwise.

How to track signon in a query? XMLP-Doku?

Hello,
can anyone give me a brief example how to track signon in a query to limit data in the standalone version of XMLP? Unfortunatly the user manual (PDF) doesn't describe that. The threads in this forum which tell this quit short didn't work to me.
Is there any other important manual or book about XMLP except the PDF user manual?
Thanks in advance
Ralf Kanis

We wanted to trap the sign-on but oracle has the following response. I heard you can modify the xdo file but this solution is not a long term solution.
Following is the reply from the development:
There is a bug in XMLP 5.6.2 which prevents dynamically passing username in sql, and would be fixed in the next release. Also it req
uires editing report file manually as the UI does not support this username bind
ing in 5.6.2.

How to track a status of release w.r.t PR and rel. group and rrel.code?

Similar Messages

Maybe you are looking for