How to track multiple documents across different sites

What I am trying to do seems relatively simple yet I can't seem to find a way to do it.
I have found methods to track documents relative to me and recently modified documents within a specific site.
Basically I want to take document A from the Developer site, document B from the HR site and Document C from the Architecture site and display them in a webpart on a different site that will let me see when they have been modified and by who. It seems that
you can display whole libraries in a webpart from another sites but not select documents from multiple libraries.
I have tried making copies to display in a webpart but it doesn't show you when the original has been modified. I need the originals to remain yet display there status in a webpart on a different site.
Any advise or direction would be greatly appreciated.
Thanks!

Hi,
According to your post, my understanding is that you wanted to display libraries in different sites.
You can save the library web part to file, then upload the file to a different site.
When you modify the library files, in the different site the web part would also update.
http://www.microsofttechnology.net/2013/04/sharepoint-2010-display-list-or-library.html
More references:
https://listrollup.codeplex.com/
https://store.bamboosolutions.com/sharepoint-Cross-Site-Display-Web-Part.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Similar Messages

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

Can anybody explain how to print multiple copies of different documents at the same time as at the moment I have to open each individually and press print

is this a windows in bootcamp question ?

How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

How can i share documents with different users on the same mac?

How can i share documents with different users on the same mac?

Shared how? The other users can read the documents or you all can read and write the documents?
The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
The second is a bit trickier.

How do I use the same track multiple times in different playlists? I want to rename it multiple times.

Hi, I am an entertainer that want rename a track a music a number of different ways so it will come up in playlist that work alphabeticly.
for instance:
Good Song I want to change to:
A Good Song
B Good Song
C Good Song
D Good Song
So I can place them in different playlist and keep the order straight.
Todd

You can't give a single track multiple sets of properties, but if you want four copies of a song with different metadata then find the original and copy/paste it three times into the Automatically Add to iTunes folder, then edit the properties of each in turn.
tt2

Multiple Domain Controllers, different sites, checking status for replication

Good day,
How can you see what DC has the current "master" or most up to date version? If I have 3 DCs and 3 different sites, and I add a new user at one of the sites, then that site has the newest master. How can I check what version of the Global Catalog / ADUC version / revision they each have?
Is there a CMD / Powershell script to do so?
This topic first appeared in the Spiceworks Community

New Delhi: When you fall ill or want to seek medical advice, who do you turn to? Your family doctor or the neighbourhood medico, of course. But, experts say, you may now have another option: social media.
WhatsApp, Twitter and Facebook, among others, are helping doctors to reach out to patients, guide them for treatments, provide counselling post-surgery and create close-knit support communities, as more Indians join social media platforms.
"We are frequently using WhatsApp, Skype and Viber to reach out to patients. Currently, we have over 180 patients connected via WhatsApp and over 30 through Skype who are receiving online rehabilitation training," says Dr H.S. Chhabra, medical director and chief of spine service at the Indian Spinal Injuries Centre in New Delhi...Read More
Read More

How to scan multiple documents to pdf on HP6600

How do I scan multiple documents into a pdf file?

Hi,
Please refer link below to know how to scan.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=35674&tmp_task=useCategory&cc=us&dlc...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

How to Watermark multiple images with different dimensions in Photoshop ?

Is there any way that I can place a watermark on the right bottom of multiple images, no matter what dimension the images are? I have tried using Photoshop Scripts > image processor, but it works only for images of same dimension. I want to put watermark on multiple images of different dimensions. This is the output i got.
For the first image the watermark got placed correctly, but for the second image watermark got distracted. As you can clearly see the dimensions are different. Please suggest me some solution.

Open an image to watermark. We must have this open before we start recording an action or else it will keep opening this image and watermarking it over and over again.
In Photoshop go to Windows >> Actions
At the bottom of the Actions Palette you will see a little folder icon, click on it and create a new folder to hold you action in.
Once you have a folder to hold your action we need to hit the Create New Action button (next to the new folder Icon we just used.)
Give our new action a name and set a function key (if required.)
If the record button is not already depressed which it should be by default, hit it now to start recording our action. (located near the folder icon again but this time to the left)
Now that our action is recording go to File >> Place
When the dialog box comes up navigate to your previously created watermark file.
Hit the Place button
Position the watermark as you would normally have it (default is dead center) and hit enter.
Go to File >> Save as,navigate to where you want your watermarked images to finish up and hit save. DO NOT CHANGE THE FILE NAME if you do when you play the batch it will name all the files it saves the same over-writing each other.
Close the image we just watermarked.
when a save dialog comes up do not save the image.
On the Actions Palette hit stop recording.
Our Action is now recorded.
To process an entire folder of images we go to File >> Automate >> Batch
Select the folder in which your images are currently
Select the folder you wish to save the watermarked copies too.
Hit OK
Photoshop is now watermarking all the Images in the selected folder for you.

How to merge multiple documents via command line (Adobe Acrobat Pro 9.3.2)?

I'm searching solutions to merge multiple documents (all stored in one folder) via command line or batch file to a single PDF-File...
Is there a way to do this?
Finaly I want to control this from a application written in MS-Access. So, perhaps there are some features already integrated in Access to do this?
Thanks for answer!

If you have some programming experience you could probably do this using VBA from within MS Access to control Acrobat via OLE.
Lots of examples on the Web.
Hope this helps

Berkeley DB - dbxml command line - how to delete multiple documents

Hello
is there a way to delete/remove multiple documents through dbxml command line?
I'm trying to delete old documents, that was created before Oct 1st
my query returns 717k documents in the result-set, is there a way to delete all of them at once ?
thanks in advance
- Y

Hi,
Please post this question in the Berkeley DB XML forum [url http://forums.oracle.com/forums/forum.jspa?forumID=274] here
Regards,
Alex Gorrod
Oracle Berkeley DB

How to Query Multiple Fields from different Tables using Toplink Expression

Hi,
I am trying to prepare an Oracle Toplink Expression to qurey the multiple columns of different tables. the query as following. Please can anyone help?
SELECT CYCLE.CYCLE_ID,
CYCLE.ASPCUSTOMER_ID,
CYCLE.FACILITYHEADER_ID,
CYCLE.ADDUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME ADDUSERNAME,
CYCLE.ADDDATE,
CYCLE.LASTUPDATEUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME LASTUPDATEUSERNAME,
CYCLE.LASTUPDATEDATE,
CYCLE.CYCLENAME,
CYCLE.CYCLENUMBER,
CYCLE.DESCRIPTION
FROM CYCLE,ASPUSER ASP
WHERE CYCLE.ADDUSER = ASP.ASPUSER_ID
and then i want to send that expression to readAllObjects method as a parameter
Expression exp = (..............this is the required qurey expression...................)
Vector employees = session.readAllObjects(getClass(), exp);
thanks,

You havent given any information on the mapping between Cycle and Asp. I presume there is a one to one mapping between them. Also it appears there is no "WHERE" clause to limit the number of cycles being retrieved. If that is the case then I presume you want to load all cycles in the system.
Thats just a clientSession.readAllObjects(Cycle.class). If you have indirection turned on the Asp should get loaded when you do a cycle.getAsp().
I presume that SQL you posted loads all the columns of CYCLE and ASP. If you are interested in a subset of CYCLE or ASP then you should do a ReportQuery or partial object read.
Hi,
I am trying to prepare an Oracle Toplink Expression
to qurey the multiple columns of different tables.
the query as following. Please can anyone help?
SELECT CYCLE.CYCLE_ID,
CYCLE.ASPCUSTOMER_ID,
CYCLE.FACILITYHEADER_ID,
CYCLE.ADDUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME ADDUSERNAME,
CYCLE.ADDDATE,
CYCLE.LASTUPDATEUSER,
ASP.FIRSTNAME || ' ' || ASP.LASTNAME
LASTUPDATEUSERNAME,
CYCLE.LASTUPDATEDATE,
CYCLE.CYCLENAME,
CYCLE.CYCLENUMBER,
CYCLE.DESCRIPTION
FROM CYCLE,ASPUSER ASP
WHERE CYCLE.ADDUSER = ASP.ASPUSER_ID
and then i want to send that expression to
readAllObjects method as a parameter
Expression exp = (..............this is the required
qurey expression...................)
Vector employees = session.readAllObjects(getClass(),
exp);
thanks,

How to read multiple documents from a system directory?

Hi,
I'm trying to read multiple documents from a specific folder that contains pdfs, jpgs... the only activity I found is the Read Document, but this activity does not have the option to read all docs under my folder!.
so any one can tell me if there is another activity can do it or is there any good solution to loop on the folder and read all the docs? any script will be helpful.
Thanks
Hussam

Hi,
After many hours of searching and readings, I found a solution, I do not know if it is the best, but anyhow this is my solution:
By using a service operation called "Find" from a service named "FileUtilsService", this operation will return a list of strings with the names of all files and/or directories under the path you want.
Then by using the "Read Document" I was able to get one file and store it in a dcoumnet variable, and by using a simple looping technique I got all the files I want.
hope this will help others
Hussam

DAG in exchange server 2010 across different sites

hello ;
I want to know the best way to implement DAG for exchange server 2010 across 2 sites in the same domain ,
I have 2 exchanger server in one site in DAG ,with 300 gb database size
but I want to implement exchange server 2010 in a new site within the same domain and this will be my 3rd exchange server and will be a member on my existing DAG in the head office
the new site is linked to my head office using ipvpn connection which is 6 mb , and ADC is there in the new site,
what is the best way to implement the new exchange server in the new site to join the existing DAG .
is there is any problem related to DAG in this scenario ?
what is the best way to implement this scenario ?
Thanks

Hi,
For each AD site, it is recommended to have at least there Exchange roles: CAS, HUB, and MBX roles.
Do you plan to have active users in this new site?
If there are active users in this new site, you can deploy a Three-Member DAG in two AD sites. However, it is recommended to deploy two DAGs in two AD sites and you should have at least two DAG members each AD site. This scenario, two witness servers in
separate site is necessary.
If the new site is only for DR purpose, you can install this new Exchange server and add it to DAG. After that, add database copy to this new server.
Besides that, here are two articles which may help you for your reference.
Database Availability Group Design Examples
http://technet.microsoft.com/en-us/library/dd979781(v=exchg.141).aspx
Understanding Database Availability Groups
http://technet.microsoft.com/en-us/library/dd979799(v=exchg.141).aspx
Hope this helps.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

How to retrive latest items from different site collection using content search web part

I have a web application that contains two site collections(team site + enterprise wiki), with the following URLs:-
-http://applicationname/teamsite
-http://applicationname/enterprisewik
Now I need to display the latest 10 wiki pages that are inside the enterprise wiki site collection (according to the modified date) inside the team site. So I read that using Content search web part allows for cross-site content query.
So I added a new content search web part , inside my team site, and I click on “change query” button. But I am not sure how I can reference the enterprise wiki site collection's library and to specify that I need to get the latest 10 wiki pages using the
content search web part's query dialog box? Can anyone advice please ?
Thanks

Edit the webpart and click change query in search criteria. click on switch to advanced mode and enter your path:
(path:"http://applicationname/teamsite" OR path:"http://applicationname/enterprisewik")
you can specify sorting by created date and click ok. in number of items to show, type 10. this should fulfill your requirement.
For further reading, here are some links:
http://office.microsoft.com/en-001/office365-sharepoint-online-enterprise-help/configure-a-content-search-web-part-in-sharepoint-HA104119042.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2013/04/30/stage-9-configure-the-
query-in-a-content-search-web-part-on-a-category-page.aspx
http://blogs.technet.com/b/tothesharepoint/archive/2013/05/23/stage-10-configure-the-query-in-a-content-search-web-part-on-a-catalog-item-page.aspx
kashif

How to update multiple columns from different tables using cursor.

Hi,
i have two tables test1 and test2. i want to udpate the column(DEPT_DSCR) of both the tables TEST1 and TEST2 using select for update and current of...using cursor.
I have a code written as follows :
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
     LOOP
          FETCH C1 INTO v_mydept1,v_mydept2;
          EXIT WHEN C1%NOTFOUND;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
          UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
     END LOOP;
     COMMIT;
END;
The above code when run says that it runs successfully. But it does not updates the desired columns[DEPT_DSCR].
It only works when we want to update single or multiple columns of same table...i.e. by providing these columns after "FOR UPDATE OF"
I am not sure what is the exact problem when we want to update multiple columns of different tables.
Can anyone help me on this ?

oops my mistake.....typo mistake...it should have been as follows --
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
Now here is the upated PL/SQL code where we are trying to update columns of different tables --
DECLARE
v_mydept1 TEST1.DEPT_CD%TYPE;
v_mydept2 TEST2.DEPT_CD%TYPE;
CURSOR C1 IS SELECT TEST1.DEPT_CD,TEST2.DEPT_CD FROM TEST1,TEST2 WHERE TEST1.DEPT_CD = TEST2.DEPT_CD AND TEST1.DEPT_CD = 'AA' FOR UPDATE OF TEST1.DEPT_DSCR,TEST2.DEPT_DSCR;
BEGIN
OPEN C1;
LOOP
FETCH C1 INTO v_mydept1,v_mydept2;
EXIT WHEN C1%NOTFOUND;
UPDATE TEST1 SET DEPT_DSCR = 'PLSQL1' WHERE CURRENT OF C1;
UPDATE TEST2 SET DEPT_DSCR = 'PLSQL2' WHERE CURRENT OF C1;
END LOOP;
COMMIT;
END;
Please let us know why it is not updating by using using CURRENT OF

How to track multiple documents across different sites

Similar Messages

Maybe you are looking for