How to track NDR message

Hello! When some our clients send us mails, the letters themself are not delivered, but clients receive no NDR.
I checked tracking log, and found that e-mails are rejected because of content filtering. How can I check whether NDR for rejected messages was generated and sent?

Please clarify, whether I take it right.
We have that configuration. Inbound external e-mails received by Linux relay (Exim), and relay then sends e-mails to Exchange. Outbound e-mails are sended directly from HUBs.
Suppose, external recipient sends the message, rejected by Exchange content filtering. Is that right, that NDR generating process must be performed on Linux relay in this case?

Similar Messages

How to track return message in file to proxy interface

I am using file to proxy scenerio, where i will get my file from FTP and updating it into a table , after updating i am calling a program to Run BDC, in my method for proxy, after that i dont how to track return message , anyone please tell me suggestion regarding for this
thanking you
Sridhar

Hi Sridhar,
What exactly you want to track????
my assumtion is the call will be of asyn mode, once the data reach the proxy method the XI job done and u can easly track that using monitoring.
Regards,
Phani

How to track Error message no.

Hi,
Could anyone please expalin how to track error messages using message no.
Urgent???????????????????
Reg,
CM

Hi,
You can not track just based on the Message number whether it is Error or Warning Message and where it is effecting.
But for this message number you will have Message class/Application Area Based on this Message class you can check on which area (Masterdata/Purchasing/Inv Mgmt/LIV) this message number is effecting.
Then in SE91 you can enter this Message class then system will show you which area it is related,what is the message number description.
Then in MM IMG Settings you can check message number for that Particular Area.--Define Attibutes for System messages in every area.
rgds
Chidanand

How to track error message when calling Transaction: va02

Hi all,
    As we all know, when we change an order through T-Code: VA02, system will update modified data to corresponding database. Meanwhile, if our operate is not legal or incorrect on T-code: VA02, system will call corresponding error messages to us.
    Now I want to know:
   1. how to track the error messages
   2. Is there any Tcode such as: SM21 that we can see the message logs after our operation?
Thanks.

Hi ,
message table for call transaction
DATA: BEGIN OF G_T_MSG OCCURS 0.
        INCLUDE STRUCTURE BDCMSGCOLL.
DATA: END OF G_T_MSG.
Exucute transaction via Call Transaction
CALL TRANSACTION 'FB01'
                 USING g_t_bdcdata
                 MODE g_l_mode
                 UPDATE 'S'
                 MESSAGES INTO g_t_msg          .
errors will be stpored in the table g_t_msg ..
Thanks .

MEASUREM_DOCUM_RFC_SINGLE_001 ( How to track Error message in BAPI_)

Hi Friends
For the crating Measure ment point i have use BAPI MEASUREM_DOCUM_RFC_SINGLE_001 But my problem is One order having 10 measuremntpoint. In that 6 creating successfull but four measurement point was error. But that BAPI no option to track error messages. Please let me know how to track message and any other way to fidn the messages.
Thanks in advance.
Prabu K

Hi,
define itab for collecting errors of type BAPIRET2.
After the FM check sy-subrc and append the errors to itab.
IF sy-subrc <> 0.
 ls_message-id = sy-msgid.
 ls_message-type = sy-msgty.
 ls_message-number = sy-msgno.
 ls_message-message_v1 = sy-msgv1.
 ls_message-message_v2 = sy-msgv2.
 ls_message-message_v3 = sy-msgv3.
 ls_message-message_v4 = sy-msgv4.
 APPEND ls_message to et_return.
 CLEAR ls_message.
ENDIF.
Regards
Praveen

HOW TO TRACK MESSAGE PARENTAL CONTROL

how to track app message like whatapp without my son found out

Ask the app developer if it's even possible. Probably not.

I am getting an exclamation point in front of all tracks and message itunes cant find original file. How do I resolve

I am getting an exclamation point in front of all tracks and message itunes cant find original file. How do I resolve

Hey waltee911,
It sounds like you're seeing something similar to this picture:
If that's the case, the following article has troubleshooting steps to solve the issue:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Welcome to Apple Support Communities!
Sincerely,
Delgadoh

How far can text messages be tracked with a court order?

how far can text messages be tracked with a court order?

Hi sherry1234,
Thanks for the excellent question. We are able to provide an average of 3-5 days of text messaging content with a court order.
Thanks,
NidiaA_VZW
Please follow us on Twitter @VZWSUPPORT

NDR message recived but the original email not available in the sent items

Dear All,
i'm using exchange 2010 and my client is outlook 2003.He sent one email inbound and its get error message that size of the message is exceeding the limit ,try to remove the attchements.etc...
i checked in outlook web access also,but not available.
But when i receive this error ,the user's original message was not showing either in the sent items or with the NDR message.
the generated message output is given below.
Generating server:
/O=domain/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=Mxxxxxxxxxe9
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=EXCHANGE ADMINISTRATIVE GROUP (FYDIBOHF23SPDLT)/CN=RECIPIENTS/CN=Axxxxxxxxxxxx1a
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=hxxf
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=txxxxA
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=pxxxJ
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=dxxxB
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=Exxxxxn
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
/O=domain/OU=First Administrative Group/cn=Recipients/cn=hxxxxxx9
#MSEXCH:MSExchangeIS:/DC=co/DC=com/DC=domain:EXDB2[523:0x000004DA:0x0000000D] #EX#
i have set email attachement limit as 10 MB.
please help me how can i find the message body of the original message from Exchange.
Best regards,
Najim.

Hi Najim,
Before we go further, I'd like to know if all the emails which fail to be delivered are missing in the sent items.
If yes, I recommend you check if there is any transport rule to make it.
If not, I recommend you try the messgae tracking log to monitor the missing emails. The undelivered emails may be stuck in the queues and you can use the commend get-queue to check it.
And here is a similar thread you can refer to:
http://social.technet.microsoft.com/Forums/en-US/20e7cd93-5954-496d-b26c-b52993a764cb/exchange-2010-sent-items-removed-for-ndr-emails?forum=exchange2010
Thanks,
Angela Shi
TechNet Community Support

Start Routine to load flat file - how to track filename in transformation

Hi,
Could you please help me to write a start routine to bring data from a flat file with a file name week45_c1_pri_2006, where the wekk name week-- changes per week. how to track the filename in the routine and how in data transfer process knows to load data from each flat file.
Message was edited by:
 Anima M

PROGRAM trans_routine.
 CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
 DATA:
 p_check_master_data_exist
 TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
 Available information: Refer to methods of
 interface 'if_rsbk_request_admintab_view'
 p_r_request
 TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
The bold area above where you get the requestid, here I am stuck.
The below code does not bring the correct requestid of PSA
CALL METHOD P_R_REQUEST->GET_REQUID30
 RECEIVING
 R_REQUID30 = IREQUID.
 CALL METHOD P_R_REQUEST->GET_REQUID
 RECEIVING
 R_REQUID = IREQUID.
 SELECT FILENAME INTO IFILENAME FROM rsseldone WHERE rnr = IREQUID AND lnr = ' 1'.
Hope this can give a better picture where I am currently stuck not able to get the PSA request id in the start routine of transformation to read the data and filename from there.
Thanks alot
Anima

Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
Thank you.
Best Regards,
Gerald

Hi Gerald
This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
P.S Please do not post your e-mail address here.
Taylor

How to track the Inbound child IDOcs in PI 7.4 Single stack

Hi Friends,
I would like to know the procedure of tracking the Inbound child IDocs in PI 7.4 Single stack.
Here is the detailed description.
Say we are getting the data from third party system and the message may have multiple IDOcs in it. The message has processed successfully from PI and reached to the target system(ERP). So, now my question is how to track the IDOc count with in that message.
Please suggest on the same.
Thanks in Advance,
Venkateswarlu.

Hi Hareesh,
Thanks for your inputs. According to the link IDOC Status, Tracking in SAP PI/PO Single Stack I am thinking the required funcionality is not there in PO 7.4, but still i would like to have little more clarity before moving further.
I will explain what what was happening in PI 7.11 so that you can understand what i am looking for in PO 7.4.
We will get the data from third party system in xml format, we had to search for the messages based on interface name and time range within SXMB_MONI. After getting the result(say the output is 100 messages), we will download the values of "Outbound Reference" field(which is a key to find the child messages for messages resulting in an Interface Collection). Below is the snap of Outbound Reference field for your reference.
Now we will go to the table IDXRCVPOR in SE16(within PI) and put the values of Outbound Reference field in Text 24 and execute. Here we will get all the child messages.
Now please let me know if this kind of scenario is possible in PO 7.4.
Thanks,
Venkat.

Tracking failed messages in BAM

HI ,
We have simple file transfer application in Biztalk 2009(receive port and send port).we want to track following key points in BAM like :
Status:whether file transfer is successful or not at the destination system.(Sendport is of FTP)
Status message : error message in case of failure at send port while delivering the file.
how can get the above fields in the BAM .We are using the tracking profile editor to track these data.
Manish

The problem is that BAM only shows instances that has not failed. So in case something fails, BAM will not be written to the Activity until it has eventually succeeded (which might be never).
So if you need BAM to track failed messages, you will need to enable "Routing for failed messages" on the Send Port and then choose elements from the ErrorReport Namespace in the Tracking Profile Editor.
Another option could be to correlate/continue from the Receive Port to the Send Port, then you would know that all Activities that has the Receive Events written but not the Send must have failed (but of course this will not give you any indication of what
the error was).
I used to think that this was a limitation in BAM, but from a BI perspective it actually makes sense: Statistics/BI should only be dealing with things that has succeeded, whereas IT-operation should be dealing with errors, you might say!
Morten la Cour

How to track harm process

Hi, all!
our sysadmin discovered that from my computer is sending spam. Antivirus programms can't find the virus. Ofcouse, it seems it is not virus, but the working process. Maybe someone have any idea how to track this process?
Thanks in advance.

As the others have indicated, it is extremely unlikely that your Mac is infected with anything that is causing it to send spam e-mail. There is no known currently active Mac malware that behaves that way. See my Mac Malware Guide for, among other things, a catalog of all currently-known Mac malware.
You don't provide much in the way of details... who is this "sysadmin" and how did they determine that your machine was responsible? How did this sysadmin determine that making a connection on port 25 equated to sending spam? (It is quite normal for Mail, and other e-mail clients, to make connections on port 25 when sending e-mail messages.)

Gr/ir wrong posting account-how to track error

Dear Expert,
For some PO, there were wrong posting in IR.After checked in OBYC and material master, user has already maintained the valuation class and the customizing also correct.
How this could be happened since the customizing and val.class already correct?
How to track the caused of error then?
Please advice.
Thank you.

Hi Susmitha,
You need to develop a small report for this. SAP stores the delivery information of email in SOST table.
The emails are stored in this table with message type (msgty) 'S' or 'I'.
If the emails are delivered the message no. (msgno) in this table becomes '711' or '701' or '73'. For all other message number it indicates the message is not delivered.
However the table is updated after a certain time limit (half an hour to two hours normally) to get the delivery status of the email. So you need to run the report after a certain time to get the actual delivery status of email. There may be few cases where the delivery status may be update after 24 hours also if performance is slow of the system. But normally this does happen in a normal condition. But this is the table where you can identify the delivery status of the email.
When you are sending email using FM SO_DOCUMENT_SEND_API1, SAP generates an uniques object number for each email. It can be found in the importing parameter of the FM in field new_object_id+5(12). You need to store this object number so that you can search with this in SOST table to get the delivery status.
Hope it helps.
Thanks,
Nirmalya

How to track NDR message

Similar Messages

Maybe you are looking for