How to track the history of supplier sites used for tax reporting (1099)

Hi,
Oracle financials doesn't allow two supplier sites setup as tax reportable sites (Unless one is inactive). Suppose if the supplier uses site1 for the year 2009 and site 2 for 2010 and now there is site3 setup as tax reportable. All three sites were setup in 2009 and all three sites are active. Supplier chosen different sites for each year as their tax reportable site.
How do we know which site oracle used to send 1099 for 2009 & 2010? How to track the history of supplier sites used for tax reporting (1099) in previous years?
Thanks in advance.
Regards,
Ram

Would the begin_date, end_date and status columns on HZ_PARTY_SITES_USES be any good? Our R12 installations is too new to have accumulated much data yet, but I would look in those columns first.

Similar Messages

  • HT5878 how to check the detail of font being used for reading the file received by an email

    I received word file as an attachment with email on my iphone. I want to check the detail on font being used for reading the word file received as attachment in an email.
    Thanks

    You don't need to copy the cert out of your configuration. OpenSSL has an "s_client" subcommand which can open an SSL connection and verify the cert for you. It even knows how to do STARTTLS. Something like this ought to do it:
    openssl s_client -starttls smtp -CAfile /path/to/ca/file -connect your.ironport:25
    The /path/to/ca/file is necessary to provide openssl with a cache of root CA certs. You could use -CApath instead of -CAfile if you have a hashed directory of root CA certs instead of a single file containing them all.
    You can also point this at your partner's SMTP server as well.

  • How to find the history from last 6 months for Editor lock flag in program?

    Hi,
    Whenever in a program if you set Editor lock flag or unset it will store in TRDIR table whether it is set or unset.
    I wanted to know the history for this flag from last 6 months when it was set and when it was unset.
    <removed by moderator>
    Thanks
    Edited by: Thomas Zloch on Dec 18, 2010 8:58 PM - priority lowered

    hello,
    I do not think it's possible to know, becasue SAP does not keep history of this kind of data...
    Thanks

  • How to change the parameter 'Default Servers To Use For Viewing And Modification' using java api dynamically.

    Hi,
    I need to change the Crystal Reports setting 'Default Servers To Use For Viewing And Modification' to a particular server.this i need to do using java api.
    could you pls provide me the sample code for this.
    Regards
    Srinivas

    The IReport interface extends IViewingServerGroupInfo interface, that allows you to specify the server group. 
    The choice selection for that interface is as follows:  0 = first available, 1 = prefer the selected server group, and 2 =  only use the selected server group.
    The server group selection is by the SI_ID for that server group InfoObject.
    Sincerely,
    Ted Ueda - Developer Support

  • How to get the exact sql developer which used for data migration?

    Hi all,
    Hope doing well,
    Sir i seen a link for data migration that is : http://www.oracle.com/technetwork/developer-tools/sql-developer/sql-server-connection-viewlet-swf-089886.html
    in this link when they are connecting to sql database so after clicking on new connection four tab is showing that is oracle, access, my sql, sql server.
    i downloaded latest version of sql developer which version is: 3.02.09.30 when i opened this i am not getting those option.
    and one more thing i am not getting miragation menu name in menu items.
    please help me.
    thanks and regards

    Hi,
    To connect to non-Oracle databases from SQL*Developer youneed to download the relevant JDBC driver.
    This is detailed in the documentation in the User Guide -
    http://docs.oracle.com/cd/E35137_01/appdev.32/e35117.pdf
    in the section -
    Database: Third Party JDBC Drivers
    The Third Party JDBC Drivers pane specifies drivers to be used for connections to third-party (non-Oracle) databases, such as IBM DB2, MySQL, Microsoft SQL Server, or Sybase Adaptive Server. (You do not need to add a driver for connections to Microsoft Access databases.) To add a driver, click Add Entry and select the path for the driver:
    ■For IBM DB2: the db2jcc.jar and db2jcc_license_cu.jar files, which are available from IBM
    ■For MySQL: a file with a name similar to mysql-connector-java-5.0.4-bin.jar, in a directory under the one into which you unzipped the download for the MySQL driver
    ■For Microsoft SQL Server or Sybase Adaptive Server: jtds-1.2.jar, which is included in the jtds-1.2-dist.zip download
    ■For Teradata: tdgssconfig.jar and terajdbc4.jar, which are included (along with a readme.txt file) in the TeraJDBC__indep_indep.12.00.00.110.zip or TeraJDBC__indep_indep.12.00.00.110.tar download
    To find a specific third-party JDBC driver, see the appropriate website (for example, http://www.mysql.com for the MySQL Connector/J JDBC driver for MySQL, http://jtds.sourceforge.net/ for the jTDS driver for Microsoft SQL Server and Sybase Adaptive Server, or search at http://www.teradata.com/ for the JDBC driver for Teradata). For MySQL, use the MySQL 5.0 driver, not 5.1 or later, with SQL Developer release 1.5.
    You must specify a third-party JDBC driver or install a driver using the Check for Updates feature before you can create a database connection to a third-party database of that associated type. (See the tabs for creating connections to third-party databases in the Create/Edit/Select Database Connection dialog box.)
    Regards,
    Mike

  • How to track the corresponding CWIP and Asset after settlement in reports

    Dear gurus,
    We are trying to develop a single report which would have commitments, actual costs, Auc amounts and Final Asset postings w.r.t a project or WBS element.
    What is the table where we can find AuC amount and CWIP number for given WBS elements. Similarly where can we find the Final Asset number corresponding to the WBS element.
    Is there any way we can work around the settlement rules.. Is there any table where the settlement rules are saved??
    Pls guide..
    Thank you
    KAP

    Prafulla wrote:
    we are mentaining few envs where all the envs get refreshed from the same baseload.But due to some reasons in a particular QA env after some time of the db refresh due to some test script execution or from the application, some data are getting deleted .Is there any method to trace the time and the content of the change and send an alert automatically without using trigger, I mean is there any audit method so that we can enble and check and also send the alert.And if possible ,Can any one let me know the details how to send mail from Oracle.
    Code instrumentation?
    As for e-mail - come on! This forum is littered with questions and answers about sending e-mail from Oracle. How about using the search button?

  • How to restrict the user to change ALV layout for Standard Report Output

    Dear All,
    How can i restict the Users to change Output layout of Standard ALV reports,
    kindly suggest to solve the issue.
    Regards,
    Niranjan.G

    Hi NIranjan,
    In the ALV function module , the i_save can have the below paramater values.
    You can add based on your requirement.
    I_SAVE = SPACE Layouts cannot be saved.
    I_SAVE = 'U' Only user-defined layouts can be saved.
    I_SAVE = 'X' Only global layouts can be saved.
    I_SAVE = 'A' Both user-defined and global layouts can be saved.
    Check the Authorization Object - S_ALV_LAYO  in SUIM (Objects by Complex Search)
    Activity -23.
    Edited by: Raj on Jul 13, 2010 3:05 PM

  • How many processors the TimesTen on Exalytics can use for 1 query operation?

    Dear
    I'm analyzing the deployment scenario Exalytics (2T, 40 processors) in cluster - two machines.
    After reading the threads on this forum and some of the documentation available for my login Oracle Partner.
    A doubt is:
    When you run SQL against TimesTen.
    To search for and return the data - for OBIEE Server, the TimesTen will use as many processors in this single operation?
    Thanks
    MMB

    Currently TimesTen (11.2.2) does not support parallel query so a single query will use only one CPU core, though it will still be very fast due to the in-memory nature of TimesTen. And you can run 40 such queries concurrently without overloading the machine.
    Support for parallel query is in our roadmap for a future release.
    Chris

  • How to find function module's and tables used for the particulat screen or TCODE?

    Hello Nation,
    I would like to know how to find the  function modules and tables used for the particular screen or TCODE or program.
    Example : I would like know the function module used in the program RDBGFT?
                     How can i find that?
    Thanks in advance ,Awaiting your reply.

    Make use of Find function  with the keyword "CALL FUNCTION".
    Make use of the same find function with the keyword "Select" to know the database tables used.
    Regards,
    Philip.

  • How to view the History of a Crystal Reports iView in EP6?

    How to view the History of a Crystal Reports iView in EP6?
    Our Crystal reports are viewed via Crystal Enterprise and are both BW and non-BW Crystal reports.
    I have looked at the three supplied iViews from Business Objects (alert, folder and thumbnail) but I have only been able to access the last instance or run on demand a CR.
    Our users would prefer to see a listing of the past runs of the report and choose which report to view.  What parameters need set in the EP6 iView to see the history of a report?

    Hi Heather,
    it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
    the link to our developer library :
    http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
    hope this helps
    Ingo

  • How to track the flow of data from R/2 to BI ?

    Hi Experts,
    Question: How to track the flow of data from R/3 to BI ?
    I want to load master data from R/3 to BI. In BI, i create an infopackage to load data from R/3. Under processing tab i set it as "PSA and then in the InfoObject (package by package)". Its a Full update.
    Now, i start the update to InfoObject. The load goes on well.
    Now, i want to track the flow of data from the master data table in R/3 to Datasource in R/3 then Extractors and then in the PSA in BI and then till the InfoObject. That is the complete flow of data from source table (in R/3) to Target table (in BI).
    Please help me know how this can be done. (For example lets take cost element master data)
    Regards,
    Suraj S Nair

    Hi,
    Data flow :
    BW :
    When u right click on the Master Data Info object -> Select Data flow.Then  it will  show u the details like DS name,IS (If 3.x)
    Once u know the DS then you need to find out the source tables for the R/3 DS.This information will get using ROOSOURCE or ROOSFIELD tables  or help.sap.com.
    My suggestion better to search in Help site for DS source tables.
    DS Tables :
    The following link will provide you the source tables for some of the LO DS.
    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    Regards
    Ram.
    Edited by: Ramakanth Deepak Gandepalli on Dec 22, 2009 9:29 AM

  • How to retain the history of previous burden rates

    Hi All
    In Projects Is there a way to retain the history of previous burden rates, My client wants to be able to report on burden rate changes.
    In Projects in the Burden Schedules, we have the ability to change rates within a Burden Schedule Version (as opposed to creating a new version). I would lilke to know that when we change rates and compile the new rates, that there is a permanent record of the old rates. The table where the inputted rates are stored is PA_IND_COST_MULTIPLIERS and I think compiled rates are storing in PA_COMPILED_MULTIPLIERS.
    The question is will the history of previous Burden rates be retained as well, if so would be possible to get the old raw cost and burdened cost values. Please advice me how to proceed.
    Apps version R12.1.2
    Thanks in advance for any feedback.
    Regards
    Krishna

    Hi
    If the old rates/multipliers were used for costing then you got CDLs on the expenditure items, using those old values. On the CDL you can find the ID of the complied ind rate.
    After you update the rate and compile, the next costing process will run and reverse old cdls creating additional cdls with the new rates. So if you look at an expenditure item you can track the multiple CDL's which used the various historic burden rates.
    The historic multiplied rates are kept in a table.
    Dina

  • How to see the history of the commands ran in the Airwave CLI (bash) and also in the DB (psql)

    Q: How to check the old commands (history of commands) ran in the Airwave CLI and also in the DB (pgsql) ?
    A: Any commands we ran on the Airwave CLI or in the DB they are logged in a file in /root directory.
    we could log in to the Airwave CLI and execute the below commands to see the history in the files below:
    # cd /root
    # ls  -al
    This above command will print out a list of files, among those are the below two files:
    .bash_history  (If we open the file either with cat or less, we will see the list of commands which we executed on the Airwave CLI)
    .psql_history  (This file will have all the sql commands executed in Airwave DB)
    These files will have the history from the installation, unless, if any user manaully edits or deletes the file. 

    Hi Heather,
    it is correct that there is no sample iView that shows the History of Crystal Reports that are stored in Crystal Enterprise but there a sample codes on our web site and there are sample codes as part of the SDK documentation that show how to call the history and you should be able to take the code and create your own Java or ASP iView based on that.
    the link to our developer library :
    http://www.businessobjects.com/products/dev_zone/default.asp?intcmp=products12
    hope this helps
    Ingo

  • How to track the flow of Sharepoint SSRS report requests to troubleshoot slowness

    How to track the flow of requests of Integrated SSRS report links in Sharepoint.
    We are using SSRS with Sharepoint for reporting purpose. The issue is some of the reports get generated fast and some other reports generation is very slow. When the sql query of these reports RDL file is executed, the records are shown fast.
    Also even on clicking the "Add Subscription" link of "Manage Subscriptions" of a report is very slow for some reports, while it is fast for other reports.
    I tried enabling SQL profiler to track the requests.  I have checked profiler log for the SQL statements with exec sp_executesql. But they are not helpful.
    Pls advice on how to track the request of flow of SSRS report request in sharepoint and how to troubleshoot the slowness in  "Add Subscription" link, response of some reports.

    Hi Pradeesh,
    According to your description, my understanding is that you want to track SharePoint SSRS report requests to troubleshoot the performance.
    Developer dashboard is very help full while troubleshooting the issues related to performance in SharePoint 2013.  You can have a try.
    About Developer dashboard, you can refer to the links:
    http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
    http://msdn.microsoft.com/en-us/library/office/ff512745(v=office.14).aspx
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • How to get the number of decimal places configured for a site column

    Hi,
    I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
    The column conatins a value, but when retrieved programatically is displayed as 5.00000000  instead of 5.00.
    I am retrieving this column using listitem.Properties[field.InternalName].
    I need to trim the decimals based on  number of decimal places configured for the site column.
    How to get the number of decimal places configured for a site column?
    Thanks in advance,
    dhijit

    Get the field as SPFieldNumber and then check DisplayFormat which returns
    SPNumberFormatTypes
    SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
    SPNumberFormatTypes numFormatType = numberField.DisplayFormat;

Maybe you are looking for

  • How to find nearest point on polyline

    Hi, I have to find the nearest point to my standing point on a polyline. I have Oracle Locator installed, but my data is not in a locator format. Is it possible to do this by using Locator's functionality by for example puting the polyline and standi

  • 10.8.2   Mac Pro 2009   4 Apple Monitors = doesn't keep the display order and configuration. Please Help me!!

    Guys i have a Mac Pro 2009 with 4 monitors attached. Since i upgrade to 10.8, then to 10.8.1 and now to 10.8.2 my Mac Pro every time it starts, cannot remember the order and appearance of my displays so ihave to reorder them every single time. Can so

  • My MG8120 won't print wirelessly from my MacBook running OS 10.9.5. Works fine with HP printers.

    My MG8120 won't print wirelessly from my MacBook running OS 10.9.5 (Mavericks).  It works fine with all of the other HP printers in the office.  Another user has the same problem with her PC running Windows 7.  And she, too, has no problems printing

  • Alternate unit of measurement

    Hi Our client wants to use alternate unit of measurement from Square Feet to PCS. The conversion factor is not constant, we have aggreed to use an average conversion factor. Stock posting will be done in square feet and PCS will be used in reporting

  • Create a loop with Caustics?

    I'm looking to create a looping underwater effect using the Caustics generator, although I am not entirely sure how to do it. I've played around with the timing etc... but I would like to think that there is a better way to accomplish this.