How to track the Log In time and IP when user login BIEE system.

i need to get the login user's logintime ,IP .please tell me how

Amol-
I doubt you can see the user who deleted the risk in the CC log file, but I am not sure about that. Anybody out there bold enough to test that in perhaps a Sandbox environment?
In my implementations, I have suggested to clients to have only ONE person or Controls Team with the CC Admin role (all authorizations). Nobody else should have full access into CC. You can tailor users' access by employing the proper CC actions in their user profile in the UME...
Ankur
GRC Consultant

Similar Messages

How to caculate the duty,fall time and rise time of signal

I am currently using Lv6.1, and have one NI GPIB-ENET/100 Controller, throught the oscillograph I want to caculate the duty of input signal, and it's fall time and rise time also, but, try it long time, I still no know how to do it, could you give me some tips? Examples is preferable.
Thanks.

Programming these oscilloscopes is very easy using gpib commands I use the tds5104 daily and have written many programs for it. the driver vi's are very easy to use. I personally would just let the scope do it.
Here is an example vi converted to 6.1
and for 7.0
Message Edited by jhoskins on 08-19-2005 08:08 PM
Joe.
"NOTHING IS EVER EASY"
Attachments:
simple_example_for_5104b.vi ‏38 KB
simple_example_for_5104b.vi ‏43 KB

How to break the link between photoshop and lightroom when saving a photo?

I've had an ongoing issue with saving copies of photos I import from LR to PS and back into LR. Any multiple copies I make get erased when they move back to LR. My solution has been to save a copy in an extra folder apart from Lightroom and import them in later. It's rough, but it works. But now I have a new demon.
I tweaked a photo in LR, made a copy to keep it safe, then sent the copy over to PH where I did some magic. I Saved As in that special other folder, closed the tab, got the usual box asking if I wanted to save the changes (of course I did), I went back to LR to see both the original and copy changed over to the PS version. I went back to PS, opened the .psd, unclicked the mask, clicked the checkbox, when back to LR and both the original and copy in LR had the mask removed.
I'm missing something here.
There m u s t be a way to break the link between PS and LR so that when I save a copy of a photo I made in LR the original and copy remain two separate photos. Does anyone know how?
Thanks,

I think I am a little confused. What you are describing seems more like a Project Server "Profile" issue, than a SharePoint to MS Project Sync.
If my guess is correct, then you just need to set the default profile to be something other than your computer.
If I am wrong, a screenshot of the error would be really helpful.
Cheers,
Prasanna Adavi, Project MVP
Blog:
Podcast:
Twitter:
LinkedIn:

How to change the size of portal destop title after user login

hi,guys
got a question,I want to change the title of desktop,but I found out this title been limited by portal.the size length is 20.
in pf_desktop_instance table,the instance_title size is 20,so I changed it to 200,but still fail.so...does any guys handled this issue before.
I am using dvt tool of oracle weblogic portal.
thank you so much.
regards
aris

I found the function from editTitle.js
     titleSave: function(newValue, oldValue) {
          var url = this.getUpdateUrl();
          this.oldValue = oldValue;
          var content = samples.dvt.Manager.getContentObject();
          content.title = newValue;
          alert(content.title);
          dojo.xhrPost({
               url:          url,
               mimetype:     "text/html",
               content:     content,
               load:          dojo.hitch(this, this.titleSaveLoad),
               error:          dojo.hitch(this, this.titleSaveError)
so,is that means this content truncate by dvt java code?
if yes.where can i get dvt sourecode.thank you.
if no,then how to fix this one.
thank you.

How to track the login time and logout times of clients

hai
please give me the solution
suppose there are 5 systems connected in LAN.
how to track the login time and logout times of clients
for a given time(may be one day or 1 hour) using any programming language.
please give me the solution

When the client logs in you write the client's ID and the current time to a database. Likewise when the client logs out. Assuming of course that you have a program that knows when those events occur.

I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??

I have enlarged icons on the log in screen and can not enter my login code. I have tried enough times that I am locked out and my iphone 5 has been disabled.How do I fix this??

Hey there byambar,
Welcome to Apple Support Communities.
It sounds like you’re describing two issues, the first issue is related to the Zoom accessibility feature and the second issue is related to the device being disabled.
Take a look at the article linked below to learn more about Zoom and the other accessibility features on your iPhone 5.
Use Accessibility features in iOS - Apple Support
This article will help you resolve the issue with your iPhone being disabled.
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Take care,
-Jason

HT3887 my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

my bluetooth says 'Not Available' how do i get it to work again. I have restarted the computer several times and have replaced the batteries in both the keyboard and mouse and yet it still is not working! please help

I have had the same problem. It was cured by turning computer off and/or restarting it. I am not sure if once was enough. I think shutting down must cut out whatever it is that blocks bluetooth. Good luck

I'm new to Mac, have had for approx. I put my iPhone and iPad and my wifes in iTunes and now when i start my system on. I now have a Guest user show up at the log on screen. Is this normal. And how can I take it off.   Tried the help and no luck

I'm new to Mac, have had for approx. I put my iPhone and iPad and my wifes in iTunes and now when i start my system on. I now have a Guest user show up at the log on screen. Is this normal. And how can I take it off.   Tried the help and no luck

Tatanka11 wrote:
I'm new to Mac,...
Then... You may find these Links of Interest and Value...
Show me how to set up my Mac.
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/     Switching from PC
http://www.apple.com/findouthow/mac/
Enjoy your Mac...

Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
Thank you.
Best Regards,
Gerald

Hi Gerald
This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
P.S Please do not post your e-mail address here.
Taylor

How to find the Last modified date and time of a package

Hi,
We need a clarification on how to find the Last modified date and time of a package in Oracle. We used the example below to explain our scenario,
Lets consider the following example
Let A, B be two packages.
Package A calls the package B. So A is dependent on B.
When A is compiled the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated.
Now there a modification in package B so it is compiled. There is no modification in package A.
Now when the package A is executed the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS gets updated but we did not make any change in Package A. Now we need to find last modified date and time of the package A . So we can not rely on the TIMESTAMP,LAST_DDL_TIME in USER_OBJECTS . Can u please tell us any other solution to get last modified date and time of the package A .
Regards,
Vijayanand.C

Here is an example:
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 10:57:32 2004-05-20:10:57:32 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 VALID
SQL> CREATE OR REPLACE PROCEDURE A AS
2 BEGIN
3 NULL;
4 NULL;
5 END;
6 /
Procedure created.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 10:59:04 2004-05-20:10:59:04 INVALID
SQL> EXEC B
PL/SQL procedure successfully completed.
SQL> SELECT OBJECT_NAME,CREATED,LAST_DDL_TIME,TIMESTAMP,STATUS FROM USER_OBJECTS
2 WHERE OBJECT_NAME = ANY('A','B');
OBJECT_NAM CREATED LAST_DDL_TIME TIMESTAMP STATUS
A 20-MAY-2004 10:57:32 20-MAY-2004 11:01:28 2004-05-20:11:01:28 VALID
B 20-MAY-2004 10:58:22 20-MAY-2004 11:01:53 2004-05-20:11:01:53 VALID
Note that the date under the column 'created' only changes when you really create or replace the procedure.
Hence you can use the column 'created' of 'user_objects'.

I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

I am new to Firefox; how do I set up for auto fill for the various forms that need the same info time and time again; thanks.

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode"
*Select : [X] "Remember search and form history"
See also:
*https://support.mozilla.org/kb/Form+autocomplete
<i>[locking thread due to the age]</i>
If you have further questions then please start a new thread.
*[[/questions/new start a new thread]]

How do you convert .AVI files for using in iMovie without losing the original clip time and date

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
paul

A number of songs in my i tunes libray have "not available" against them (in the column headed "Time") and won't play. How do I correct this?

A number of songs in my i tunes libray have "not available" against them (in the column headed "Time") and won't play. How do I correct this?

Hello enrique a.
Instead of trying to re-invent the wheel on this one, take a look at an article such as this one to help you take care of these exclamations. Basically, it means iTunes is unable to locate the file on your computer anymore.
http://ipod.about.com/od/itunesproblems/qt/Fixing-The-Itunes-Exclamation-Point.h tm
B-rock

HT1725 When I download a song from iTunes into my library, it often says it has downloaded, charges me for it, and on the song in my library shows the full playing time. However, when I play the song, at around halfway through it skips to the next song?

When I download a song from iTunes into my library, it often says it has downloaded, charges me for it, and on the song in my library shows the full playing time. However, when I play the song, at around halfway through it skips to the next song?
i'm just wondering:
a) why it does this
and b) how to stop it doing this, because it still charges me for the song :/

If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise, I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

How to track the flow of Sharepoint SSRS report requests to troubleshoot slowness

How to track the flow of requests of Integrated SSRS report links in Sharepoint.
We are using SSRS with Sharepoint for reporting purpose. The issue is some of the reports get generated fast and some other reports generation is very slow. When the sql query of these reports RDL file is executed, the records are shown fast.
Also even on clicking the "Add Subscription" link of "Manage Subscriptions" of a report is very slow for some reports, while it is fast for other reports.
I tried enabling SQL profiler to track the requests. I have checked profiler log for the SQL statements with exec sp_executesql. But they are not helpful.
Pls advice on how to track the request of flow of SSRS report request in sharepoint and how to troubleshoot the slowness in "Add Subscription" link, response of some reports.

Hi Pradeesh,
According to your description, my understanding is that you want to track SharePoint SSRS report requests to troubleshoot the performance.
Developer dashboard is very help full while troubleshooting the issues related to performance in SharePoint 2013. You can have a try.
About Developer dashboard, you can refer to the links:
http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
http://msdn.microsoft.com/en-us/library/office/ff512745(v=office.14).aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

How to track the Log In time and IP when user login BIEE system.

Similar Messages

Maybe you are looking for