How to train endusers on the products we created ?

helo experts pls answer this question how to train the enduser on the products we created?

For the purpose of preparing enduser manuals the functional guys understand the requirements of the endusers as to who will be doing what transactions and accordingly the manuals are prepared and have them trained. Like if an enduser is going work on sales cycle then those corresponding activities are identified and someone who works on master data maintenance for the relevant information is prepared as to how that particular is to be carried out. The Business Process Master Lists are used for this purpose taken from the standard ASAP installation where it identifies the work by T.code as how what to enter, how to enter and transact the information.
Now the enduser would have information with regards to his working routine. These manuals are developed using PPT's or some software like MS visio or even a word.
basic user guide
http://help.sap.com/saphelp_nw04/helpdata/en/7b/7998403de08368e10000000a1550b0/frameset.htm
for portals roles:
http://help.sap.com/saphelp_nw04/helpdata/en/a5/4b0b40c6c01961e10000000a155106/frameset.htm
http://wiki.ehow.com/User_talk:Mandrakescreams
some Pdf's about BeX
http://help.sap.com/saphelp_nw04/helpdata/en/a5/4b0b40c6c01961e10000000a155106/frameset.htm
http://searchsap.techtarget.com/searchSAP/downloads/chapter-august.pdf

Similar Messages

HT201653 We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

We are a retail shop which has a copy of AppleCare Protection plan. The box is not sealed. How can I tell if the product has been registered or not.

Since the only thing needed in that box is the small piece of paper with the (very long) registration code on it (usually found inside the booklet), see if that is actually there and, if it is, call Apple at 800-275-2273 and ask to be transferred to the Applecare department. Here is the link to the Applecare plan - just in case you may need it, see the fax numbers listed under para. 9 (Cancellation).
http://www.apple.com/legal/sales-support/applecare/appmacnaen.html

HOW DO YOU CLAME ON THE PRODUCT WARRENTY ON A CRAKED IPOD SCREEN

how do you clame on the product warrenty on a cracked ipod 4g screen 9 months old?

john210497 wrote:
i slipped over and i cracked in my poket
Damage is not covered. As with any warranty - manufacturer defects are covered.

I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed?

I just bought and installed the Adobe Illustrator. I would like to know how long can I use the product before an extension is needed? And on how many computers can I install this product? Thanks.

What version exactly did you buy? If you bought CS6, then the license is perpetual and doesn't need any extension. If you bought CC, then you need to renew your plan every year. You can install each Adobe software on 2 machines with a single license for non-concurrent use.
Mylenium

How we can see when the condition records created.

Hi,
How we can see when the condition records created ( Valid from and Valid to ) ? And also how we can see the changes made in the Condition records?
Regards,
jyothi.

Hello,
you can display the condtion records in transaction VK13.
Here you have the posibillity to display the changes of the condtion records.
Please goto VK13
> Enter your selection criteria
> Enviroment
> changes
But you can also create a condtion list. and the you can display more than one condition record:
Please have a look at the transation V/LD - Pricing Report
For example: conditon list 14 for taxes.
Here you get an overview of tax condtions.
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points.

Lock the production order creating without material for order type zp01

Hi all,
Good morning.My client wants to lock the production order creating without material for order type zp01.He does not want to create production order without material.Its very urgent.Please guide me the settings if any.
Thanks and Regards
Sukumar

Hi Sukumar,
You can do by applying user exit.
Use PPCO0007 - Exit when saving production order.
Function module - EXIT_SAPLCOZV_001.
Include Program - ZXCO1U06
Write your Code:
*& Include ZXCO1U06
Regards,
Sankaran

How to use BAPI_GOODSMVT_CREATE against the Production Order

Hi Friends,
I need ur help very urgently,
I am using the BAPI_GOODSMVT_CREATE (movement code '03') for goods return against the production order (movement type '262').
everything working fine, ie it gets updated in IM/WM.
but when we check in the CO03 transaction for the production order, the qty withdrwan not gets updated in the component overview. still showing the old value. But when we used regular SAP transaction MB1A, it gets updated in CO03 (qty withdrwan in the component overview).
How to solve this issue using this BAPI.
I have attached the code, plese help me is there any other parameter to set for this BAPI.
Thanks in advance.
Shankar
Code:
*Header Structure
st_gm_code-gm_code = '03'. "
st_gm_header-pstng_date = st_gm_header-doc_date = sy-datum.
SORT itab BY aufnr matnr j_3asized.
LOOP AT itab.
itab_afs_gm_itemx-material = itab-matnr.
itab_afs_gm_itemx-plant = itab-werks.
itab_afs_gm_itemx-stge_loc = itab-lgort.
itab_afs_gm_itemx-batch = itab-new_charg .
itab_afs_gm_itemx-stock_cat = itab-j_4kscat.
itab_afs_gm_itemx-stck_type = 'F'.
itab_afs_gm_itemx-move_type = '262'.
itab_afs_gm_itemx-entry_qnt = itab-j_3aerfmg .
itab_afs_gm_itemx-grid_value = itab-j_3asized.
itab_afs_gm_itemx-orderid = itab-aufnr.
itab_afs_gm_itemx-move_reas = itab-move_reas.
APPEND itab_afs_gm_itemx .
SELECT SINGLE etenr
INTO etenr
FROM j_3abdsi WHERE aufnr = itab-aufnr
AND matnr = itab-matnr.
gr_afs-matdoc_itm = '0100'.
gr_afs-sched_line_sku = etenr.
gr_afs-stock_cat = itab-j_4kscat.
gr_afs-grid_value = itab-j_3asized.
APPEND gr_afs.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = st_gm_header
goodsmvt_code = st_gm_code
IMPORTING
goodsmvt_headret = st_gm_headret
materialdocument = mat_doc
matdocumentyear = doc_year
TABLES
goodsmvt_item = itab_afs_gm_itemx
return = bapi_return
afs_goodsmvt_sku = gr_afs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

Hi Friends,
I need ur help very urgently,
I am using the BAPI_GOODSMVT_CREATE (movement code '03') for goods return against the production order (movement type '262').
everything working fine, ie it gets updated in IM/WM.
but when we check in the CO03 transaction for the production order, the qty withdrwan not gets updated in the component overview. still showing the old value. But when we used regular SAP transaction MB1A, it gets updated in CO03 (qty withdrwan in the component overview).
How to solve this issue using this BAPI.
I have attached the code, plese help me is there any other parameter to set for this BAPI.
Thanks in advance.
Shankar
Code:
*Header Structure
st_gm_code-gm_code = '03'. "
st_gm_header-pstng_date = st_gm_header-doc_date = sy-datum.
SORT itab BY aufnr matnr j_3asized.
LOOP AT itab.
itab_afs_gm_itemx-material = itab-matnr.
itab_afs_gm_itemx-plant = itab-werks.
itab_afs_gm_itemx-stge_loc = itab-lgort.
itab_afs_gm_itemx-batch = itab-new_charg .
itab_afs_gm_itemx-stock_cat = itab-j_4kscat.
itab_afs_gm_itemx-stck_type = 'F'.
itab_afs_gm_itemx-move_type = '262'.
itab_afs_gm_itemx-entry_qnt = itab-j_3aerfmg .
itab_afs_gm_itemx-grid_value = itab-j_3asized.
itab_afs_gm_itemx-orderid = itab-aufnr.
itab_afs_gm_itemx-move_reas = itab-move_reas.
APPEND itab_afs_gm_itemx .
SELECT SINGLE etenr
INTO etenr
FROM j_3abdsi WHERE aufnr = itab-aufnr
AND matnr = itab-matnr.
gr_afs-matdoc_itm = '0100'.
gr_afs-sched_line_sku = etenr.
gr_afs-stock_cat = itab-j_4kscat.
gr_afs-grid_value = itab-j_3asized.
APPEND gr_afs.
ENDLOOP.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = st_gm_header
goodsmvt_code = st_gm_code
IMPORTING
goodsmvt_headret = st_gm_headret
materialdocument = mat_doc
matdocumentyear = doc_year
TABLES
goodsmvt_item = itab_afs_gm_itemx
return = bapi_return
afs_goodsmvt_sku = gr_afs.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'

My CD doesn't work how can I re-install the product after formatting the PC , I do have the product key.

Hi,
I have formatted my PC , then when I tried to re-install the Adobe x standard , I noticed that the CD is damaged , I do have the product key so how can I retrieve the installation.
Regards,

Download the installer from Download Acrobat products | Standard, Pro | XI, X
If you need more help, you better ask in the Acrobat forum (this is the Acrobat.com forum).

How to chose or change the production folder thumbnails ?

There is a way to assigne a specific thumbnails for a production folder ?

Hi
There is a way to generate a specific clip for the Thumb nail of a project, that is very simple. The only trick is that you have to do it when you first put something into the project. I.e. Get at still pic of what you would like the thumb nail to be and add this first to the production folder. This is only a work around and yes it would be good if this thumb nail could be changed after the project is created. It is however possible to find this thumbnail in the "Proxies.bundle" using show contents and change it. But I would be careful to create a thumbnail of the same specs as the original. Whilst I have discovered the thumb nail source file, I have not tried it myself. To fix my thumb nails I created a new projects with the same name and dragged in the desire pic first then dragged across the rest of the original media.

How do you get past the product distribution list error on iMovie to download updates?

I am trying to set up a number of new computers at a school. They came with iLife already installed but when I try to do the updates I can not update IMovie because of an error that says the product has not been registered on the product distribution list. What do I need to do on all of these new computers so I can update iLife when needed?

They came with iLife already installed
Updates can only be installed from the same Apple ID that was used for the original purchase of the apps.

How can I give me the access to create a developer key in the market?

Hi!
I'm new in the basis area and I don't have access to create a developer key. A consultant need a developer key.
How can I give me the access in the market place to create it?
Thanks!

Hi
You need to get the access key from SAP.
Refer to the procedure of obtaining access keys from SAP in BASIS.
Security
Regards,
Raj

How can find what are the customers are created in my earlier version.

Hi all,I am trying to find out how can I check the what are the customers are created in my earlier version of sap (i.e 4.7B)
My client Upgrade d the 5.0 in 2007. Now my client asking, list of WDs which are created in the 4.7B.

Hi,
You know when the SAP went live with the new version.
In t.code SE16, enter table name KNA1.
In the field created on put value of new SAP version go-live date and select a < symbol by double clicking the field. Then click on execute button, the system will provide the customer master created before the new version go-live date.
Regards,

How can i test if the frame is created

hi,
i am using ADFBC Swing.
i have created an MDI Frame and 2 internals frames.
in the MDI frame i put a button and i want when i press it i do a test.
if the internal frame1 is created i unload it and i create the 2.
else if the second is created i do nothing
thanks

nothing.
All sales are final

How do I check if the function I created successfuly is working?

create or replace function salary_practice(department_id in number, salary in number)
return number
as
begin
if department_id = 100
then return salary + 1000 ;
elsif department_id = 30
then return salary + 1500;
elsif department_id = 90
then return salary + 2000;
else
return salary + 500;
end if;
end;
FUNCTION SALARY_PRACTICE compiled
But how do I run a query to get the result? Thanks in advance.
Here's what what I've tried to do. None of them gives me the result.
select salary_practice from hr.employees;
select salary_practice from dual;
select salary_practice(salary) from hr.employees;
select department_id, salary_practice(salary) from hr.employees;

992256 wrote:
create or replace function salary_practice(department_id in number, salary in number)
return number
as
begin
if department_id = 100
then return salary + 1000 ;
elsif department_id = 30
then return salary + 1500;
elsif department_id = 90
then return salary + 2000;
else
return salary + 500;
end if;
end;
FUNCTION SALARY_PRACTICE compiled
But how do I run a query to get the result? Thanks in advance.
Here's what what I've tried to do. None of them gives me the result.
select salary_practice from hr.employees;
select salary_practice from dual;
select salary_practice(salary) from hr.employees;
select department_id, salary_practice(salary) from hr.employees;SELECT SALARY_PRACTICE(10,5000) FROM DUAL;

How to inactivate categories in the BP eventgroup CREATE in PCUI?

Hi all,
I need your help.
At the application CRMM_ACCOUNT in PCUI CRM 5.0 we need to inactivate the categories PERSON and GROUP for one userrole. The other roles should be able to choose all three entries PERSON, ORGANIZATION and GROUP.
Our first idea was to delete the two obsolete entries in the method FILL_EVENTGROUP of our own MAC ZCL_PCUI_ACC_ACCMOD. But that doesn't work because the event CREATE gets the wrong index (1 for PERSON instead of 2 for ORGANIZATION) by the method FILL_DYNAMIC_EVENT in class CL_CRM_BSP_FRAME_PATTERN.
In debugging mode we saw, that we need to fill the value INACTIVE into the field GT_TOOLBAR_STRUCT-MENU-BLVIEW of the first and third entry to get the desired result. But we have no idea how to get this without modifying the SAP standard.
Any ideas or other ways to get the desired result?
Thanks
Martin

Martin,
From what I understand the PERSON, ORGANIZATION, GROUP is something you can't restrict without a system modification. Those attributes only influence the form of address and don't have any other influence on the business partner.
If you look at transaction BP, you will see that there are no "exits" surrounding this functionality at all either.
Take care,
Stephen

How to train endusers on the products we created ?

Similar Messages

Maybe you are looking for