How to Tranfer the care pack from a stolen ipad

Ine of our users has had their ipad stolen. Can anyone adivise on how i transfer the care pack agreement from the stolem ipad to a new on?

Sorry, but AppleCare cannot be transferred. You can cancel the plan and get at least a partial refund of the plan price, though, and then purchase a new plan for the new iPad. Instructions for cancelling the plan on the stolen unit can be found in the AppleCare terms and conditions:
http://www.apple.com/legal/applecare/appforipad.html
Regards.

Similar Messages

  • How to find the data loaded from r/3 to bw

    hi
    how to find the data loaded from r/3 to bw is correct . i am not able to find which feild in the query is connected to which feild in the r/3 . where i am geting the data from r/3 . is there any process to find which feild  and table the data is comming from . plz help
    thanks in advance to u all

    Hi Veda ... the mapping between R/3 fields and BW InfoObjects should take place in Transfer Rules. Other transformation could take place in Update Rule.
    So you could proceed this way: look at InfoProvider Data Model and see if the Query does perform any calculation (even with Virtual keyfigures / chars). Than go back to Update Rules and search for other calculation / transformation. At least there are Tranfer Rule and eventually DataSource / Extraction Enhancements.
    As you can easily get there are many points where you have to look for ... it's a quite complex work but very usefull.
    Once you will have identified all mappings / transfromation see if BW data matchs R/3 (considering calculations ...)
    Good job
    GFV

  • How to change the langage pack in the N958GB ?

    How to change the langage pack in the N958GB ?
    I bought this N95 8GB in greece and it has only greek/english
    How to put french/english ?

    You have taken the handset to a part of the world for which it was not intended.
    Your only option is to take the phone to a local Nokia Care Point, explain that you bought the phone in Greece and ask them to install a French language pack. They may charge you for this.
    Also note that your French language pack will be erased whenever you update the phone's firmware and possibly when you perform a reset as well.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • How to make the car just like in  the index of Flash cs5?

    I  am curious know how to make the car of the Flash cs5 index site ?
    Does it render from 3D model or we can create it from illustrator ?

    You need to make enough of an interface with JNI to let your app be a service... google a search on it and you'll find a generic JNI model to allow you to do what you want.

  • How to find hp care pack number hw/sw product number

    how to find hp care pack number and hw/sw product number pls advice
    This question was solved.
    View Solution.

    Contact HP directly.
    This is the HP Consumer Global support forum and not a sales unit of HP.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How to get the query values from the url in a servlet and pass them to jsp

    ok..this is the situation...
    all applications are routed through a login page...
    so if we have a url like www.abc.com/appA/login?param1=A&param2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
    so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanks

    ok..this is the situation...Sounds like you have a bad design on your hands.
    You're going to send passwords in a GET request as clear text? Nice security there.
    Why not start with basic security and work your way up?
    %

  • How to get the return values from a web page

    Hi all :
       how to get the return values from a web page ?  I mean how pass values betwen webflow and web page ?
    thank you very much
    Edited by: jingying Sony on Apr 15, 2010 6:15 AM
    Edited by: jingying Sony on Apr 15, 2010 6:18 AM

    Hi,
    What kind of web page do you have? Do you have possibility to for example make RFCs? Then you could trigger events (with parameters that could "return" the values) and the workflow could react to those events. For example your task can have terminating events.
    Regards,
    Karri

  • How to get the complete data from Webdynpro using a RFC

    hi guys,
    A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
    I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
    And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
    I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
    FUNCTION ZSEND_MAIL_ATTACHMENT.
    ""Local Interface:
    *"  IMPORTING
    *"     VALUE(OUT_PLACE_LEVEL) TYPE  XSTRING OPTIONAL
    *"     VALUE(BIN_DATA) TYPE  INDX_CLUST OPTIONAL
    *"  TABLES
    *"      IT_MESSAGE STRUCTURE  SOLISTI1
    Data Declaration
      DATA: gd_cnt TYPE i,
          gd_sent_all(1) TYPE c,
          gd_error TYPE sy-subrc,
          tab_lines LIKE sy-tabix.
    Structure Declaration
      DATA : BEGIN OF it_file OCCURS 0,
              row(255),
             END OF it_file.
      DATA : BEGIN OF i_split OCCURS 0,
      row(50),
      END OF i_split.
    Internal Table Declaration
      data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
      DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
      DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
      data : wa_receiver like table of SOMLRECI1 with header line.
      data : it_receiver like table of SOMLRECI1 with header line.
      data : v_bin_data like SOLISTI1 occurs 0 with header line.
      DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
    *data bin_data1 like table of solix with header line.
      REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
      CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
      DATA V_SUBJECT(255) VALUE 'HI'.
      gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name = 'SENDFILE'.
      gd_doc_data-obj_descr = v_subject.
      gd_doc_data-sensitivty = 'O'.
      APPEND GD_DOC_DATA.
    Appending The Internal Table it_packing_list
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      it_packing_list-doc_type = 'RAW'.
      it_packing_list-body_num = tab_lines.
      APPEND it_packing_list.
    *CALL FUNCTION 'GUI_UPLOAD'
    *EXPORTING
    *filename = V_FILE_PATH
    *filetype = 'BIN'
    *TABLES
    *data_tab = BIN_DATA.
      move bin_data to v_bin_data.
      append v_bin_data.
    *move soli to bin_data.
      LOOP AT V_BIN_DATA into objbin.
    MOVE v_bin_data TO objbin-line.
        APPEND objbin.
      ENDLOOP.
      CLEAR it_packing_list.
      DESCRIBE TABLE objbin LINES tab_lines.
      it_packing_list-transf_bin = 'X'.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 1.
      it_packing_list-body_start = 1.
      it_packing_list-doc_type = 'PDF'.
      it_packing_list-body_num = tab_lines.
      it_packing_list-doc_size = tab_lines * 255.
      APPEND it_packing_list.
    data file(255) value '/tmp/bali.txt'.
    *Appending The Internal Table it_receivers
    close dataset '/tmp/bali.txt'.
    open dataset '/tmp/bali.txt' for output in text mode encoding default.
    if sy-subrc = 0.
    loop at objbin.
    transfer objbin to '/tmp/bali.txt'.
    endloop.
    else.
    write 'hi'.
    close dataset '/tmp/bali.txt'.
    endif.
      it_receiver-receiver = '[email protected]'.
      it_receiver-rec_type = 'U'.
      it_receiver-com_type = 'INT'.
    APPEND wa_receiver.
    move wa_receiver[] to it_receiver[].
      append it_receiver.
    *Move wa_receiver[] to it_receivers[].
    Clear it_receivers.
    if i_OUT_PLACE_LEVEL NE 0.
    loop at it_receivers into wa_receiver.
       loop at it_receivers into wa_receiver.
    **Function Module To Post The Message To Externa Mail
         CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
           EXPORTING
             document_data              = gd_doc_data
             put_in_outbox              = 'X'
             commit_work                = 'X'
           TABLES
             packing_list               = it_packing_list
             CONTENTS_TXT               = objbin
             receivers                  = it_receivers
           EXCEPTIONS
             too_many_receivers         = 1
             document_not_sent          = 2
             document_type_not_exist    = 3
             operation_no_authorization = 4
             parameter_error            = 5
             x_error                    = 6
             enqueue_error              = 7
             OTHERS                     = 8.
         clear wa_receiver.
    ENDFUNCTION.

    You have to convert your long string to a table of shorter strings.
    There may be other ways, but one possibility is to use a loop to process you string.
    while (there is something left)
       put the next e.g. 1024 characters in a new row of your table
    endwhile
    If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
    Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

  • How to get the job logs from sm35 by using the queue id and session name?

    hi all,
    can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
    FYI..
    i want to read this job log and i want to send it to an email id.
    -> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module  job_close.
    but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
    thanks in advance,
    koushik

    Hi Bharath,
    If you want to download it to the local file then you can follow the instructions in the below link.
    How to download Batch Input Session Log?
    Regards,
    Sachin

  • How to delete the duplicate data  from PSA Table

    Dear All,
    How to delete the duplicate data  from PSA Table, I have the purchase cube and I am getting the data from Item data source.
    In PSA table, I found the some cancellation records for that particular records quantity  would be negative for the same record value would be positive.
    Due to this reason the quantity is updated to target but the values would summarized and got  the summarized value  of all normal and cancellation .
    Please let me know the solution how to delete the data while updating to the target.
    Thanks
    Regards,
    Sai

    Hi,
    in deleting the records in PSA table difficult and how many you will the delete.
    you can achieve the different ways.
    1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
    2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
    3.you can restrict the cancellation records at query level.
    Thanks,
    Phani.

  • How can i disable the credit card from that stolen acc and register to my new account

    Hello everywone i have a big problem.. Somewone stole my apple id and changed everything (email , secret question). In that account was my credit card registered. how can i disable the credit card from that stolen acc and register to my new account ?? thanks for help

    Is it an IMAP or POP account?
    For POP accounts, you can select remove from server under the advanced tab of the account.
    Apple support article with information on receiving a message more than once:
    Mail Problems

  • How to remove the credit card from the Apple id?

    how to remove the credit card from the Apple id?
    plz ITS urgently

    If the option to select "None" isn't appearing when you attempt to edit your payment information, then there is likely a billing issue with your last iTunes Store purchase(iTunes didn't receive payment from your credit card company for that order). Before you can remove your credit card, you have to pay for the unpaid order. You can call your credit card company and troubleshoot the billing issue with them, or try another card, or if you live in a country that supports iTunes Gift Cards, you can redeem one of those to pay for the order. Once you have done that, you should be able to remove your credit card info as outlined in http://support.apple.com/kb/ht1918

  • How to delete the Hierarchy data from Infoobjects.

    How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
    When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

    Hi
    Go to SE11 and enter the hierarchy table name.
    /BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
    Thanks
    TG

  • How to upload the master data from legacy to SAP

    Hi Frends,
    how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
    please clarify me
    Regards
    Sap Guru

    Hi ,
    use LSMW  or BDC for uploading Master & transaction data.
    This work is done by the Respective Functional team.
    Chandra

  • How to get the current week from sysdate?

    Hi sir,
    i want to know how to get the current week from sysdate?
    thanks

    Hi Nicolas
    It seems you like to check my post and also make commend ;) thanks for your attention
    Have you ever read the posts above and given solutions ?Yes, I did
    Have you read the docs ? Yes, I checked
    What's the added value here ?Did youYou shared doc with solution(long one), I shared short one which point same solution(Check what Joel posted)..So what is benefit, As you can guess oracle docs are sometimes become so complicated as specialy for beginner...(At least it was like that for me and Belive me somedocs are still sooo complicated even for oracle coworkers ) But for you I dont know ;)
    => Why writting the PS in bold ?Why.. Let me think... Ohh Maybe I am looking some questions(many) and even user get answer they should not changed status so I am reading some posts and try to get problem and loosing time..
    So I am putting that PS wiht BOLD because I dont wanna lose time my friend ;) Because While I am trying to help ppl here In same time I am trying to giving support to my customer prod systems. Which mean time is very important for me...
    Hope my answer could satisfy you..
    One important PS for you.. You may not like my posts (or someone) but my friend I become tired to read&answer and make commend to on your comment which is about my posts.
    I am not newbie in forum(At least I fell like that) and I belive I know how I should make post..
    Thank you
    Regards
    Helios

Maybe you are looking for