How to transfer a keynote file to USB stick

how to transfer a keynote file to USB stick

You can't transfer to USB stick.
Try email your files.

Similar Messages

I don't understand how to put the core files on usb stick

I read the instructions here http://wiki.archlinux.org/index.php/Ins … _USB_stick but I am not sure how to do this I tried this way ( using cmd prompt on winxp x64) dd if=C:\Documents and Settings\Administrator\My Documents\Torrents\archlinux-2008.06-core-x86_64.img=/dev/sd[F]
but I get an error saying that dd is an unrecognized command, I have also downloaded Flashnul but I am not sure how to use it if I type in anything I cannot execute it because as soon as I push the enter key Flashnul quits. so could someone explian to me how to do this please

jo3 wrote:
dd is a unix command.
I have not used flashnul in a while so IIRC first plug in your usb stick and type "flashnul -p" at a command prompt to get a list of devices. Then type "flashnul flash_device_number -L archlinux-2008.06-core-x86_64.img" to copy the img to the device.
HTH
-jo3
hank you for your reply.
Well Iguess flashnul isn't working properly because when I type in "flashnul -p" it just quits.
I installed Cygwin and have tried to install it that way but I was getting errors saying no such file or dir.
Well it ended up being that my usb stick was "f: I kept trying dd if=archlinux-2008.06-core-x86_64.img of=\\.\f:Kingston"and not "f: I kept trying dd if=archlinux-2008.06-core-x86_64.img of=\\.\f"
I am thinking that the The Cygwin Way
Make sure your cygwin installation contains the dd package.
Place your image file in your home directory, in my case it is:
C:\cygwin\home\John\
Run cygwin as administrator (required for cygwin to access hardware). To write to your USB drive use the following command:
dd if=image.img of=\\.\[x]:
where image.img is the path to the img file within the cygwin directory and \\.\[x]: is your USB device where x is the windows designated letter, in my case "\\.\d:".
Note: This will irrevocably delete all files on your USB stick, so make sure you don't have any important files on the stick before doing this.
should say that for noobs like me

How to transfer files from USB stick

How can you transfer files from USB stick to ipad2?

Buy a portable wi-fi router with file sharing such as MOCREO 5-in-1 Portable WiFi (not personaly vouching for this one it just happens to be the one I have and it cost less than the apple connection cables).
Plug your USB stick into the router
Connect your phone via wi-fi to the router.
Log into the routers built in file managment or use any FTP capable app to connect (GoodReader, ifiles, etc)
Transfer files.

How to transfer a pdf file to my kindle paperwhite?

How to transfer a pdf file to my kindle paperwhite?

You first need one or more apps on your iPad that support the types of file that you want to copy over to it, the iPad doesn't have a file system link a 'normal' computer, everything has to be stored within an app.
For PDFs there are free apps such as Apple's iBooks app and also Adobe Reader - and paid-for apps such as GoodReader (which also supports read-only of word and excel documents). For documents the options include Apple's Pages app for Word documents, Numbers for Excel spreadsheets and Keynote for Powerpoint. And from third-parties apps such as Documents To Go ('premium' version) and QuickOffice Pro HD. As to how you then get the file to your chosen app will depend upon what the app supports - different apps will have different ways of copying their content to/from a computer e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via your wifi network, email, dropbox etc.
For iBooks, which supports PDFs, you should be able to add the PDFs to your iTunes library via File > Add To Library, and they should go into the Books section of your library. You can then sync them to iBooks by connecting your iPad to your computer and selecting it on the left-hand side of your computer's iTunes (if you have iTunes on your computer then you can enable the left-hand sidebar via control-S), and on the right-hand side use the Books tab to select and sync them to the iBooks app.

How to transfer an xml file to NW Portal Knowledge Management from XI?

Hi all,
Anybody knows how to transfer an xml file to NW Portal Knowledge Management from XI?
What kind of adapter type I have to choose? And which procedures I have to do in KM Portal? Create a folder, what kind of folder and permissions?
Suggestions and ideas are appreciated.
Thanks in advance,
Ricardo.

Hi
Can anyone tell me how XI sends messages to applications like J2EE. In REceiver comm channel, I think we specify about the target system like J2EE appl.
Aadapter Type: HTTP
               Receiver
Transport Protocol: HTTP1.0
Message Protocol:    XI payload in HTTP body
Adapter Engine:      Integration Server
Addressing Type:     URL address
Target host:         localhost
Service Number:      7001(Port number of Weblogic appl server--where my J2EE appl is deployed).
Path     : /Invoke/DisplayRes/
Authentication Type:Use Logon Data for SAP System
Content Type: text/xml
Username:   xiappluser
password:   xx
XML code:   UTF-8
I suppose XI sends msgs to http://localhost:7001/Invoke/DisplayRes/........
in this example if am correct?
Then I have given all tyhe necessary setting but my servlet is not able to display XML msg in browser?
This is my servlet code:
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
     PrintWriter out = response.getWriter();
     BufferedReader brin =new BufferedReader(new InputStreamReader(request.getInputStream()));
     String inputLine;
     StringBuffer sBuf = new StringBuffer();
        response.setContentType("text/xml");
     while ((inputLine = brin.readLine()) != null)
         sBuf.append(inputLine);
         out.println("hi");
            out.println(sBuf.toString());
         brin.close();
         out.flush();
What went wrong?
Help me, all helpful answers are highly rewarded.
Thanks

How to transfer a xml file?

Dear friends,
I have a question about how to transfer a xml file between server and client using axis or weblogic.
My application needs to send xml files instead of primitive data types and bean objects.
Is it possible to tranfer files between server and client?
thank you very much for your great help!
jayanandan.

hi,
There are two ways in which u can send an xml file.
1) U send it along with the body of the soap message.
2)u can send it as an attachment in the soap envelope. this method u can use for any type of files.
If u send it in soap body the it will take more time for the processing of the soap body.so attachment is the best way.
I case of any queries please feel free to post it in the forum
Regards
Sandy

How to transfer my PDF files from computer to iphone 5s

How to transfer my PDF files from my laptop to my iPhones 5 s and how to make folder to store those files?

The iphone does not have a file system to create a folder in, instead apps themselves are responsible for storing their files,
Use an app like ibooks or acrobat reader.
You can then transfer the files via itunes or email them and then use the open in... option and select your chosen app.
They will then be stored within that app.

How to access files in USB stick when installing from it?

I have prepared my installable USB stick (8G) from Arch 2009.02 ISO file, and copied some configuration files to the USB stick. Everything looks well.
After the Arch installation (not reboot yet), I want to access my configuration files on the stick, but I just cannot find them. Where has my USB stick been mounted to, and how can I read the files on it?
I am confused...:rolleyes:

lilsirecho wrote:To mount your USB stick you can mount it as root. Using sd(x) as an example, mkdir /mnt/sd(x) in /mnt...
Of course I tried this, but failed. Well, maybe what I said above is not explicit enough. I mean:
1. the USB stick is just the installable USB stick I used to install Arch;
2. not mounting the USB stick on the system I've installed, but just on the live arch linux OS that the installable USB stick introduced.
After all, I was booting from the USB stick, so it may have been mounted. In fact, I can find it by:
# cat /proc/mounts
In the output, my USB stick is /dev/sdb1, and the mounted directory is /bootxxx (not remembered, sorry), but I JUST cannot find this directory. So I was confused.
lilsirecho wrote:...Confused here that you used an .iso to generate a USB stick installer when the download archlinux-2009.02 is available in .img format for both i686 and X86_64...
Yes, I know there's an IMG file for USB stick. But I don't want to use it, because after I use "dd" command writing the IMG file to the USB stick, the stick became the same size (about 330Mb) as the IMG file. Then how can I copy some other files into this 8G USB stick?
So, I used archlinux-2009.02 ISO file. I prepared my USB stick by cfdisk, and formated it. I mounted the ISO file to some directory (using abc as an example), and copied all the files in abc to my USB stick, then installed grub on it. Finally, an installable 8G USB stick was made.
Last edited by cwjiof (2009-02-19 09:24:29)

How do I transfer music from iTunes to USB stick for auto

Hi there, trying to troubleshoot an automotive USB input. How do I transfer songs from iTunes to USB stick to play in vehicle?

Connect the usb stick to your computer.
Open itunes. Drag whatever you like to the usb stick.

How to Transfer a JAR file from PC to a Java enabbled mobile?

The project (creation of the JAR file) is developed in our local PC and transfer the JAR file to a mobile using Bluetooth. How to transfer the JAR file to a remote mobile?

The situation is like this.
We are transfering the JAR file from the PC to the Mobile using Bluetooth.
Our J2ME project is already install on Nokia's 6600 and given to the salesman's on the field. Now i have updated my software and i want to upgrade the same on their mobiles. For this i can't call all the 2000 salesman's who are all over the country (India) to my place to get the latest software installed and configure.
If i have a GPRS like solution for transfering my file from my PC to the remote mobile. I would be better. If you know any this related to this kindly reply me.

How to make linux bootable off a usb stick on mac

Guys i was wondering how to make linux bootable off a usb stick on mac, since i dont have a optical drive in my mac, plus i need it for university

I have the same question, but parsed differently. What people have tried answering here is:
how to (make linux (bootable off a usb stick on mac))
What I'm trying to find is:
how to make ((linux bootable off a usb stick) on mac)
That is, I don't want to boot from the usb stick on my mac; I want to write an ISO to a usb stick that's plugged into my Macbook Pro (Mavericks), then carry the stick to a different machine (several discarded Windows boxes in fact), plug it in there, and watch it boot on that machine. I've done a bit of googling, but everything I find talks about making USB drives with content that can be booted on a Mac. What I'm wondering is if it's possible to write to use my Mac to write bootable USB gadgets that work on other machines that aren't running OSX software.
Anyone know if this is discussed anywhere? If not, what's the right forum to ask it on? And how do I ask it so that I don't get yet another explanation of how to make something that will boot on my Mac?
I have several linux ISOs waiting. Actually, I could do the job on one of several available linux boxes. But I'd like to do it on my portable laptop, which at the moment is this Macbook Pro.

HT4101 how to transfer pictures from ipad to usb memory card/usb stick

How can i transfer my pictures from ipad to any sd card or usb stick, i just bought an ipad camera connection kit.

The camera connection kit can only be used to import photo/video files form a camera, SD card or USB flash drive. You can't import other types of files. You can't export any type of files using the camera connection kit.
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
Copy Photos (& Videos) Between iOS Devices
http://tinyurl.com/cnz95bc
 Cheers, Tom

How can I make Keynote files read-only (eg: to share with students)?

I would like to share some keynote files with students, and I would like to set them up as read-only, so that the students can tap the screen, read my presentation, but not alter it. I've tried to set the files up as read-only on my iMac desktop, but when I load the file onto my iPad, it's still editable.
Any ideas re: how to make Keynote files read-only?
I've tried to export the files as PDF and load them into iBook, but some of Keynote's basic "build" functions won't work this way. Specifically, I have files set up with questions and answers (ie - a question appears, and you have to tap the screen to see the answer, but this "build" function seems to disappear when I get it to show up in iBook).
Any ideas how to make Keynote files read-only? I am happy to use another program, but I want the students to tap the screen in order to see the answer to a question.
Thanks!

as long as $PATH is set, you shouldn't need to reconnect them (i think). if you send the list of apps through | awk -F '/' '{print $NF}' | that'll strip the path
/edit: added the "(i think)" part
Last edited by brisbin33 (2009-06-02 21:33:06)

How to transfer itunes prog files & data to ext HD in Win XP & delete on C drive?

How do I transfer iTunes prog files & data to an external HD, delete the one on C drive, and work on the one in the ext HD? Am using Win XP.

See: Buegie, "How to transfe iTunes library from crashed-but-accessible HD" #1, 10:22pm Oct 23, 2005 CDT

Practical question: How to transfer ASM backup files?

Hi friends:
A practical question:
all dev, production database using ASM for storage, production db using RMAN did full backup. (everyday night, one copy redundancy)
For example, production database is down, then in short time, it is hard to repaire back online, then, I want to transfer ASM backup files(sets) to dev database, make dev as a quick temporary production db.
question: how can you find full backup sets (location) and how to trasnfer?
thanks a lot in advance.
Message was edited by:
jerrygreat

You can find backupsets by using the
list backupset
command
and you can transfer them using the
backup backupset command.
Both commands are fully documented in the RMAN documentation for 10g.
Please read it.
Obviously changing a dev database into a production one has little to do with proper backup and recovery procedures.
Sybrand Bakker
Senior Oracle DBA

How to transfer a keynote file to USB stick

Similar Messages

Maybe you are looking for