How to transfer an internal table from one FUNCTION to another

Hi,
   In Normal Enabled Function, I have created an External Parameter as
     ZTEMP LIKE ZSTR. (ZSTR is a structure).
   In Source Code, am using an Internal Table(ZINT) which is of the same structure type.
I have populated the internal table. Now I have to export these internal table values to another function.
I tried to assign the internal table to the exporting parameter. But this shows error as ZTEMP is not an internal table.
   So, How to transfer this??
   Give me sample Code.
Regards,
Kalai.
Message was edited by:
        Kalaivani Pachiappan

Hi Ramesh,
Thanks for ur reply. Actually I am a beginner. So I dint get u. Can u first clear me one doubt: If I give ZTEMP LIKE ZSTR as export parameter, will it create ZTEMP as a table with all fields as in ZSTR ( or ) ZTEMP itself as a structure???
Then How can I transfer the internal table using Import/Export?
Actually FUNCTION1 is giving some input to FUNCTION2. FUNCTION2processes and stores the result in Internal Table. Now I have to export these internal table contents to FUNCTION1.
How can I do this??
Thanks and Regards,
Kalai

Similar Messages

Transferring an Internal table from one Function Module to another

Hi,
I need to transfer an Internal Table from one FM to another. I've tried the statements IMPORT IT from Memory ID and EXPORT IT to Memory ID, but this is not working. I think the reason is different session or diff LUW, I can not use SET and GET Parametr syntax, as I will not be able to pass Internal Tables through it.
Can any1 please give a solution on this?
Cheers
Abhishek

I'd agree with April that the easiest way to pass data directly from FM1 to FM2 is via "tables", but what is your overall code structure i.e. are you going:
Program
Call Function FM1
back to Program
Call Function FM1
or are you going:
Program
Call Function FM1
Call Function FM2 from FM1
In either case, I would expect the export / import to be working fine, at least it seem to when I tried it using:
export lt_data from lt_data to memory id 'Z:1234'.
import lt_data to lt_data from memory id 'Z:1234'.
Jonathan

How do I move a table from one schema to another schema on Oracle XE?

How do I move a table from one schema to another schema on Oracle XE?

Hi,
I tried to use the insert/select statement that you had given, it did not work.
The error is ORA-00913: too many values.
But finally what I did was, I went into the system schema where the table was and generated the DDL through the utilities and afterwards I imported them into the schema that I am currently working on. It solved the problem!
However I am still curious to know why the insert/select statement did not work? Do you know any site/tutorial which gives a real time example?
Thank you
Skye

How do I move a table from one schema to another schema?

How do I move a table from one schema to another schema?

Grant access to the table from the source schema to destination schema.
GRANT SELECT ON <TABLE_NAME> TO <DESTINATION SCHEMA>A simple way would be to use CREATE Table with select syntax (in destination schema)
CREATE TABLE <TABLE_NAME> AS SELECT * FROM <SOURCE SCHEMA>.<TABLE_NAME><li>However, you would be in trouble when the table has index,constraints and triggers.
So you can better of grab the DDL statement of the table(and any additional components) andd then create the table in the destination schema.You can use SQL developer, Toad or Apex's Object browser for this.
After the table is created, Insert the records using SELECT.
INSERT INTO <TABLE_NAME> SELECT * FROM <SOURCE SCHEMA>.<TABLE_NAME>This question is discussed in great detail in this AskTom thread

How to transfer itunes purchased music from one account to another on same family computer

how to transfer itunes purchased music from one account to anither on same family computer?

Move it to the /Users/Shared/ folder.
(58475)

How to transfer a calendar items from one month to another

How can one transfer a calendar item from one month to another month by drag and drop.

Click it and hold, then drag. If you want to duplicate it, hold down the option/alt key while dragging.

Importing internal table from one program to another program

Hi everybody,
i have one small doubt.
i am using submit statement and passing the values from this program to another program selection screen. in that program logic is written.In that program one internal table values are being exported to the memory id of that program. now i have to import that internal table values into my program by using import statement. i am using the following syntax
import itab from menory id 'program name'.
but i am getting an error saying program name is unknown.
what is the exat syntax for this .
thanking you,
giri.

hi,
check these statements.
IMPORT - Get data
Variants:
1. IMPORT obj1 ... objn FROM DATA BUFFER f.
2. IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
2. IMPORT obj1 ... objn FROM MEMORY.
3. IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
4. IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
5. IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
6. IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
7. IMPORT obj1 ... objn FROM LOGFILE ID key.
8. IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
9. IMPORT (itab) FROM ... .
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For more details, see Storing Cluster Tables.
Variant 1
IMPORT obj1 ... objn FROM DATA BUFFER f.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters.
Effect
Imports the data objects obj1 ... objn from the data buffer declared. The data buffer must be of type XSTRING . The data objects obj1 ... objn can be fields, structures, complex structures, or tables. The system imports all the data that has been stored in the data buffer f using the EXPORT ... TO DATA BUFFER statement and is listed here. It also checks that the structure used in the IMPORT statement matches the one in the EXPORT statement.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. The contents of all the objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end
of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is
relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a
runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular
character cannot be converted when the character set is converted.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
Not all character-type fields are converted. To convert
a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters.
Moreover, you cannot use this addition in conjunction with the additions 3, 4, 5, 6, or 7.
Addition 9
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the
character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 2
IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See No implicit field names in cluster.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from the specified internal table itab. The first column in the internal table must be of the predefined type INT2 and the second must be type X. To define the first column you must refer to a data element in the ABAP Dictionary that has the predefined type INT2.
All data that was stored in the internal table itab using EXPORT ... TO INTERNAL TABLE and listed, is imported. The system checks that the EXPORT and IMPORT structures match.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the specified data cluster were imported, the rest remain unchanged (it is possible that no data object was imported).
SY-SUBRC = 4:
The data objects could not be imported.
The contents of all listed objects remain unchanged
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
Places the object in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to add new fields to the ends
of structures, even to substructures and internal tables (the additional fields are filled with initial value during the IMPORT). It also allows you to increase the size of existing fields (C, N, X, P, I1, and I2) and to map Char fields to STRING type fields or byte fields to XSTRING type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
field or omit the last component on the highest level (till Release 4.6 this was possible without specifying an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the page order is
relevant, that is any substructures match. With this addition, the system also ignores alignment changes arising from the Unicode conversion (for example, due to subsequent insertion of named includes).
This addition rules out any subsequent structural enhancements (addition 3) or structural shortening (addition 4) because with this addition it is the structural limits and include limits that are to be ignored.
As from Release 6.10, the include information will also be stored in the dataset, so that it is possible to also check whether the includes match, that is substructures and includes (named or unnamed) are treated the same. When importing data that was exported in a Release lower than 6.10, the includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition has the effect that an error in the
character set conversion does not cause a runtime error. The system uses "#" as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The system uses the specified replacement character if a
character cannot be converted during a character set conversion. If this addition is not specified, the system uses "#" as a replacement character.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
No character type fields are converted. For this you
must create a field or structure that is identical to the exported field or exported structure, except that all character type fields must be replaced with hexadecimal fields.
This addition, which is only allowed in programs with a set Unicode flag, allows you to import binary data disguised as single byte characters. This addition cannot be used in conjunction with additions 3, 4, 5, 6, and 7.
Addition 9
... CODE PAGE INTO f1
Effect
The codepage of the exported data is stored in the
character-type field f1 (for example, to be able to analyze the data imported with the addition IN CHAR-TO-HEX MODE).
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 (for example, to be able analyze the data imported using the addition IN CHAR-TO-HEX MODE). The field f2 must be of type ABAP_ENDIAN, defined in type group ABAP. You must therefore include the type group ABAP in the ABAP program with a TYPE-POOLS statement.
Variant 3
IMPORT obj1 ... objn FROM MEMORY.
Extras:
1. ... = f (for each object to be imported) 2. ... TO f (for each object to be imported)
3. ... ID key
4. ... ACCEPTING PADDING
5. ... ACCEPTING TRUNCATION
6. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See You Must Enter Identification and Cannot Use Implicit Field Names inClusters
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures or tables) from a data cluster in the ABAP memory (see EXPORT). Reads in all data without an ID that was exported to memory with "EXPORT ... TO MEMORY.". In contrast to the variant IMPORT FROM DATABASE, it does not check that the structure matches in EXPORT and IMPORT.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because the ABAP memory was empty.
The contents of all objects remain unchanged.
Note
You should always use the addition 3 (... ID key) with the statement. Otherwise, the effect of the variant is not certain (EXPORT statements in different parts of a program overwrite each other in the ABAP memory), since it exists only for reasons of compatibility with R/2.
Additional methods for selecting and deleting data clusters in the ABAP memory are provided by the system class CL_ABAP_EXPIMP_MEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... ID key
Effect
Imports only data stored in ABAP memory under the ID key.
Notes
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Addition 4
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 5
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR field, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 6
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO MEMORY, DELETE FROM MEMORY, FREE MEMORY
Variant 4
IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (after itab(ar) or ID key )
5. ... ACCEPTING PADDING
6. ... ACCEPTING TRUNCATION
7. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters and You Cannot Use Table Work Areas.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from shared memory. The data objects are read using the ID key from the area ar in the table itab - c.f. EXPORT TO SHARED MEMORY). You must use itab to specify a database table although the system reads from a memory table with the appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. You may have used the wrong ID. The contents of all the objects remain unchanged.
Notes
The table dbtab named according to SHARED MEMORY must be declared using TABLES (except in addition 2).
The structure of fields (field symbols and internal tables) to be imported must match the structure of the objects exported in the dataset. The objects must be imported under the same names as those under which they were exported. Otherwise, they will not be imported.
The key length consists of: the client (3 digits, but only if tab is client-specific); area (2 characters); ID; and line number (4 bytes). It must not exceed 64 bytes - that is, the ID must not be longer than 55 characters, if the table is client- specific.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the shared memory are provided by the system class CL_ABAP_EXPIMP_SHMEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... CLIENT g (before ID key)
Effect
The data is imported from client g (provided the import/export table is tab client-specific). The client, g must be a character-type data object (but not a string).
Addition 4
... TO wa (after itab(ar) or ID key)
Effect
You need to use this addition if user data fields have been stored in the application buffer and are to be read from there. The work area wa is used instead of the table work area. The target area must correspond to the structure of the called table tab.
Addition 5
... ACCEPTING PADDING
Effect
This addition allows you to: append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 6
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 7
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 4 (enlarge structure) or addition 5 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO SHARED MEMORY, DELETE FROM SHARED MEMORY
Variant 5
IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (last addition or after itab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See Cannot Use Implicit Fieldnames in Clusters und Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields or
tables) from the cross-transaction application buffer. The data objects are read in the application buffer using the ID key of the area ar of the buffer area for the table itab (see EXPORT TO SHARED BUFFER). You must use dbtab to specify a database table although the system reads from a memory table with an appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this means that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table from the application buffer with the structure INDX:
TYPES: BEGIN OF ITAB3_LINE,
 CONT(4),
 END OF ITAB3_LINE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
 F1(4),
 F2(8) TYPE P DECIMALS 0,
 ITAB3 TYPE STANDARD TABLE OF ITAB3_LINE,
 INDX_WA TYPE INDX.
Import data.
IMPORT F1 = F1 F2 = F2 ITAB3 = ITAB3
 FROM SHARED BUFFER INDX(ST) ID INDXKEY TO INDX_WA.
After import, the data fields INDX-AEDAT and
INDX-USERA in front of CLUSTR are filled with
the values in the fields before the EXPORT
statement.
Notes
You must declare the table dbtab, named after DATABASE using a TABLES statement.
The structure of the fields, structures, and internal tables to be imported must match the structure of the objects exported to the dataset. Moreover, the objects must be imported with the same name used to export them. Otherwise, the import is not performed.
The maximum total key length is 64 bytes. It must include: a client if the table is client-specific (3 characters); an area (2 characters); identification; and line counter (4 bytes). This means that the number of characters available for the identification of a client-specific table is 55 characters.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the cross-transaction application buffer are provided by the system class CL_ABAP_EXPIMP_SHBUF.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in the field f
Addition 3
... CLIENT g (after dbtab(ar))
Effect
Takes the data from the client g (if the import/export table dbtab is client-specific). The client g must be a character-type data object (but not a string).
Addition 4
... TO wa (as the last addition or after itab(ar))
Effect
You need to use this addition if you want to save user data fields in the application buffer and then read them from there later. The system uses a work area wa instead of a table work area. The target area must have the same structure as the table tab.
Example
DATA: INDX_WA TYPE INDX,
 F1.
IMPORT F1 = F1 FROM SHARED BUFFER INDX(AR)
 CLIENT '001' ID 'TEST'
 TO INDX_WA.
WRITE: / 'AEDAT:', INDX_WA-AEDAT,
 / 'USERA:', INDX_WA-USERA,
 / 'PGMID:', INDX_WA-PGMID.
Variant 6
IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... CLIENT g (before ID key )
4. ... USING form
5. ... TO wa (last addition or after dbtab(ar))
6. ... MAJOR-ID id1 (instead of ID key)
7. ... MINOR-ID id2 (with MAJOR-ID id1 )
8. ... ACCEPTING PADDING
9. ... ACCEPTING TRUNCATION
10. ... IGNORING STRUCTURE BOUNDARIES
11. ... IGNORING CONVERSION ERRORS
12. ... REPLACEMENT CHARACTER c
13. ... IN CHAR-TO-HEX MODE
14. ... CODE PAGE INTO f1
15. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Fieldnames in Clusters and Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures, or tables) from the data cluster with ID key in area ar of the database table dbtab (see EXPORT TO DATABASE).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that not data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table:
TYPES: BEGIN OF TAB3_TYPE,
 CONT(4),
 END OF TAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD,
 F1(4), F2 TYPE P,
 TAB3 TYPE STANDARD TABLE OF TAB3_TYPE WITH
 NON-UNIQUE DEFAULT KEY,
 WA_INDX TYPE INDX.
INDXKEY = 'INDXKEY'.
IMPORT F1 = F1
 F2 = F2
 TAB3 = TAB3 FROM DATABASE INDX(ST) ID INDXKEY
 TO WA_INDX.
Notes
You must declare the table dbtab, named after DATABASE, using the TABLES statement (except in addition 5).
The structure of fields, field strings and internal tables to be imported must match the structure of the objects exported to the dataset. In addition, the objects must be imported under the same name used to export them. If this is not the case, either a runtime error occurs or no import takes place.
Exception: You can lengthen or shorten the last field if it is of type CHAR, or add/omit CHAR fields at the end of the structure.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the database table specified are provided by the system class CL_ABAP_EXPIMP_DB.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... CLIENT g (before the ID key)
Effect
Data is taken from the client g (in client-specific import/export databases only). Client g must be a character-type data object (but not a string).
Example
DATA: F1,
 WA_INDX TYPE INDX.
IMPORT F1 = F1 FROM DATABASE INDX(AR) CLIENT '002' ID 'TEST'
 TO WA_INDX.
Addition 4
... USING form
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Effect
Does not read the data from the database. Instead, calls the FORM routine form for each record read from the database without this addition. This routine can take the data key of the data to be retrieved from the database table work area and write the retrieved data to this work area. The name of the routine has the format <name of database table>_<name of form>; it has one parameter which describes the operation (READ, UPDATE or INSERT). The routine must set the field SY-SUBRC in order to show whether the function was successfully performed.
Addition 5
... TO wa (after key or after dbtab(ar))
Effect
You need to use this addition if you want to save user data fields in the cluster database and then read from there. The system uses the work area wa instead of a table work area. The target area entered must have the same structure as the table dbtab.
Example
DATA WA LIKE INDX.
DATA F1.
IMPORT F1 = F1 FROM DATABASE INDX(AR)
 CLIENT '002' ID 'TEST'
 TO WA.
WRITE: / 'AEDAT:', WA-AEDAT,
 / 'USERA:', WA-USERA,
 / 'PGMID:', WA-PGMID.
Addition 6
... MAJOR-ID id1 (instead of the ID key).
Addition 7
... MINOR-ID id2 (with MAJOR-ID id1)
This addition is not allowed in an ABAP Objects context. See Cannot Use Generic Identification.
Effect
Searches for a record the first part of whose ID (length of id1) matches id1 and whose second part - if MINOR-ID id2 is also declared - is greater than or equal to id2.
Addition 8
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 9
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 10
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 8 (enlarge structure) or addition 9 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 11
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 12
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular character cannot be converted when the character set is converted. If you do not use this addition, '#' is used as a replacement character.
This addition can only be used in conjunction with addition 11.
Addition 13
... IN CHAR-TO-HEX MODE
Effect
All character-type fields are not converted. To convert a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters. Moreover, you cannot use this addition in conjunction with the additions 8, 9, 10, 11, and 12.
Addition 14
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 15
... ENDIAN INTO f2
Effect
The byte order(LITTLE or BIG) of the exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 7
IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
This variant is not allowed in an ABAP Objects context. See Cannot Use Clusters in Files
Note
This variant is no longer supported and cannot be used.
Variant 8
IMPORT obj1 ... objn FROM LOGFILE ID key.
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Extras:
1. ... = f (for each field f to be imported) 2. ... TO f (for each field f to be imported)
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Field Names in Clusters
Effect
Imports data objects (fields, field strings or internal tables) from the update data. You must specify the update key assigned by the system (with current request number) as the key.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. An incorrect ID may have been used.
The contents of all objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Variant 9
IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... CLIENT g (after dbtab(ar)) 2. ... TO wa (last addition or after dbtab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Table Work Areas.
Effect
Imports an object directory stored under the specified ID with EXPORT TO DATABASE into the table itab. The internal table itab may not have the type HASHED TABLE or ANY TABLE.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The directory was successfully imported.
SY-SUBRC = 4:
The directory could not be imported, probably because an incorrect ID was used.
The internal table itab must have the same structure as the Dictionary structure CDIR (INCLUDE STRUCTURE).
Addition 1
... CLIENT g (before ID key)
Effect
Takes data from the client g (only with client-specific import/export databases). Client g must be a character-type data object (but not a string).
Addition 2
... TO wa (last addition or after dbtab(ar))
Effect
Uses the work area wa instead of the table work area. When you use this addition, you do not need to declare the table dbtab, named after DATABASE using a TABLES statement. The work area entered must have the same structure as the table dbtab.
Example
Directory of a cluster consisting of two fields and an internal table:
TYPES: BEGIN OF TAB3_LINE,
 CONT(4),
 END OF TAB3_LINE,
 BEGIN OF DIRTAB_LINE.
 INCLUDE STRUCTURE CDIR.
TYPES END OF DIRTAB_LINE.
DATA: INDXKEY LIKE INDX-SRTFD,
 F1(4),
 F2(8) TYPE P decimals 0,
 TAB3 TYPE STANDARD TABLE OF TAB3_LINE,
 DIRTAB TYPE STANDARD TABLE OF DIRTAB_LINE,
 INDX_WA TYPE INDX.
INDXKEY = 'INDXKEY'.
EXPORT F1 = F1
 F2 = F2
 TAB3 = TAB3
 TO DATABASE INDX(ST) ID INDXKEY " TAB3 has 17 entries
 FROM INDX_WA.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE INDX(ST) ID INDXKEY
 TO INDX_WA.
Then, the table DIRTAB contains the following:
NAME OTYPE FTYPE TFILL FLENG
F1 F C 0 4
F2 F P 0 8
TAB3 T C 17 4
The meaning of the individual fields is as follows:
NAME:
Name of stored object
OTYPE:
Object type (F: Field, R: Field string / Dictionary struc

How to mirroring/replicating a table from one database to another database?

I am having a table in 10g Database.
I want to mirror this table in 9i Database.
How to do this?

1) Just to clarify, it is quite possible to use Streams between a 9i and 10g database (note for future reference that specifying actual database versions, i.e. 9.2.0.4 or 10.2.0.4 rather than marketing labels is generally helpful because there may be differences between different 9i and 10g releases)
2) Are you setting up one-way replication? Or will changes be made on both databases, implying the need for multi-master replication?
3) Why doesn't the table have a primary key? Could you declare a primary key? If not, you'd have to use the ROWID (i.e. specify WITH ROWID when creating the materialized view log and the materialized view) which tends to cause maintenance issues down the line. It really doesn't make sense to replicate a table without a primary key-- it really doesn't make sense to design a table without a primary key the vast majority of the time.
Justin

How to transfer an Imovie project from one Mac to another?

I don't see any way to save it onto a disc or flash drive to get it to the other computer.
Thanks for the help,
Charlie

You have tocopy the entire iPhoto library intact as a single entity - projects are only logical things - entires in the iPhoto database
LN

How do you transfer your itunes account from one mac to another

hi guys just wondering how to transfer my itunes library from one mac to another. i have a connecter cord but one of the computers isnt reading it. any help?

Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

How do I transfer a paid app from one iPad to another?

I am not sure where is the best place to post this question, but here it is anyway:
The school I work in has 37 iPads split between 2 mobile carts. For a variety of reasons, the staff wands the iPads divided up by classroom. No problem. The problem is that they would like the paid apps on the ipads moved around so the grade level apps wind up in the appropriate classrooms. This is logical.
My problem is I have no real idea how to free up iPads from one iPad so that they are available for transfer to another ipad. I use Apple Configurator to acquire paid apps from the Volume Purchasing Program and download/install them initially to iPads.
One knowledgeable individual gave me this advice:
"If you placed the apps on the ipad using Apple Configurator, then you should be able to attach the initial iPad to AC, unsupervise the iPad, and the apps' licences should be available for redistribution. Then connect iPad #2 to AC, turn Supervision on in AC, then add the specific app to iPad #2."
- - - - That sounded too good to be true. I tried it and found out that that process does not free up app licences (at lest when I tried it). What I think is the problem is that I don't know Apple products and iOS well enough and missed steps. (I am from the Netware/Microsoft AD/Windows computing environment.)
Could someone help an old grunt out and possibly provide a detailled set of steps how to transfer paid app licences from one iPad to another? I appreciate any help. Thanks
iPad 2, iOS 8.1.3

Hi Technician7,
It is true that you can "return" app licenses to Apple Configurator and redistribute that license to another iPad. The key is that both iPads must be "Supervised" in order to return the app license. See this from Apple:
Removing apps from devices
If you use Apple Configurator to remove a redeemed VPP app from a supervised device, Apple Configurator marks the corresponding redemption code as available. It can be reassigned to a different device supervised by this copy of Apple Configurator for this Mac only. It is not available for redemption by other Macs or iOS devices.
If you unsupervise a supervised device, all apps will be removed from the device and the redemption codes used to install those apps will be marked available for reassignment. If you simply remove a device record from Apple Configurator, the redemption codes for any apps on that device will not be available for reassignment.
I hope this answers your question!
~Joe

Passing Tables from one method to another method.

Hi All,
I'm creating a Web-Dynpro program in which I wouild like to passing an internal table from one method to another method within the same View.
Is this possible? And if so, how can I set it up.
Thank you.
Paul

Hi Paul ,
I hope u wud be clear with passing table from one method to another now .U may also wish to see this WIKI
Link: [Passing table parameters|https://wiki.sdn.sap.com/wiki/display/WDABAP/Passingtableparameterfromoneviewtoanotherview+locally]
I hope it wud help u .
regards,
amit

Passing internal table from one program to other without using IMPORT

Hi Experts,
I need to pass an internal table from one program to other. However i cannot use IMPORT/EXPORT due to some reason. Any idea how this can be done?
Warm regards,
Harshad.

hi,
for passing itab from one program to another u can use
IN FIRST PROGRAM WRITE ,
perform pass_data(SECOND_PROGRAM_NAME) using ITAB.
in both the program declare itab with same structure.
if u want to do some changes in that itab and if u want it back in first program then write as
perform pass_data(SECOND_PROGRAM_NAME) using ITAB changing itab.

How do i transfer my itunes library from one macbook to another?

hi,how do i transfer my itunes library from one macbook to another?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.
Also... have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html

How do I transfer my checked songs from one computer to another - tried exporting library playlist etc but no luck! Please help! I have 26,000 songs - 17,000 are selected and I can't run down the list on my new computer and re-check 17,000 songs! Thanks!

How do I transfer my checked songs from one computer to another - tried exporting library playlist etc but no luck! Please help! I have 26,000 songs - 17,000 are selected and I can't run down the list on my new computer and re-check 17,000 songs! Thanks!

Make a smart playlist of your whole library but only checked songs - #4 on http://support.apple.com/kb/ht1801
Highlight all files in that playlist, then drag to the other drive. This isn't preserving any playlists or whatever, just copying files from one drive to another.
You might want to delete the smart playlist this once you are done because it will probably gobble up resources with that many files.

How to transfer an internal table from one FUNCTION to another

Similar Messages

Maybe you are looking for