How to transfer asset?

Hi FI Experts,
I'm trying to transfer asset from one to another during LAE process. Could anybody help me?
Can I use any of the following FMs? If any of the following can be used, please`provide me the parameters details to be passed. 
LAFA_ASSETS_TRANSFER
LAFA_ASSETS_TRANSFER_PREPARE
LAFA_ASSETS_ON_TRANS_ACQUIRE
LAFA_ASSETS_ON_TRANS_RETIRE
LAFA_ASSETS_RETIRE_ON_TRANSFER
Regards,
Ravi

Hi,
You should use BAPI:
BAPI_ACC_***_TRANSFER_POST
Regards,
Eli

Similar Messages

  • How to Transfer Assets between Departments

    Hi,
    Will SAP System allow the creation of the corresponding accounting entries for the Transfers of Fixed Assets between departments.
    How to transfer the between departments,please give me the proceedure.
    Thanks
    Sap Guru

    Hi,
    Here is how you have to handle transfers between two departments that belong to the same company code. You have 2 scenarios here : a) both the departments belong to the same profit center and ofcourse different cost centers 2) both belong to different profit centers and different cost centers.
    1st scenario : Since they both belong to the same profit center, all you have to do is include a new cost center in the new validity period in the asset master data. SAP will automatically post the depreciation in the new cost center w.e.f the new validity period.
    2nd scenario : This is a Intra-company transfer ABUMN. You have to create a new asset (assuming you dont have one already created) for the new cost center and transfer from the old to the new. This will post the relevant Profit center entries automatically. Make sure you review the transfer variant which is usually 4.
    Thanks
    Jagdish

  • How transfer asset master balances

    how transfer asset master balances. please explain details process.

    Use ABUMN or
    ABT1N
    based on ur requirement.
    for documentation.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/17/1d3c3934f18443e10000000a114084/frameset.htm
    if open points please raise..
    Regards
    Anantha

  • How to transfer FA from one employee to Another employee

    Hi to all
    Anybody know that how to transfer fixed asset from one employe to another employee .plz post your reply in technical and functional aspect.
    Thanks
    Zulqarnain

    Hi,
    You can either transfer individual assets (Asset Workbench -> Assignments) or multiple assets (Mass Transactions -> Transfers)
    In case of Mass Transfers, you can enter search criteria and provide from and to employee names.
    - Mukul

  • How to transfer gl, vendor, customer balances from 1com code to 2 com code

    Hi sap guru's,
           Regarding one issue, please give me the solution it's urgent,
    My problem is My client will  having  11 com codes. out of those one company code is merge with another company code. so how to transfer all balances from one company code to another company code.
    is there any effect will haapen once balance upload. ie adjustments
    Thanks & regards,
    Maruthi.

    You create one account grp Uplaod accounts.In which you create 5 GL masters with follwing data
    Tax Catergory :*
    Line Item Display : Yes
    Open Item Display : Yes
    Sort: 0001(Gl), 012(Vend),031(Cust)018(Asst) etc
    FSG: g001
    Under that grp you need to create all 5 accounts . All are balancesheet Accounts
    GL Balance Upload Ac
    Customer Balance Upload Ac
    Vendor Master Uplaod Ac
    Asset Master Upload Ac
    Material Upload Ac
    You should take the trail balance of the company and chose all gl accounts with balances
    use LSMW uplaod GL balance upload f-02
    Example : Salareis Acc - 5000 Dr Balance
    Then entery will be
    Salaries Ac----
    Dr 5000
    To GL Uplaod Ac 5000
    Example : Rent Ac-2000 Cr Balance Ac
    Then the GL entry will be
    GL upload Ac----
    DR 2000
    TO Rent Ac 2000
    Example for Vendor upload Account F-43
    Vendor Cr Balnce- 5000 and client want ot upload line item wise
    ex line items are: 1000,2000,3000
    Vendor Upload Ac----
    Dr 50000
    To Vendor Ac 1000
    To Vendor Ac 2000
    To Vendor Ac 3000
    Same with the case of Customer F-22,
    Assets : For assets you need to use AS91 which will create asset master data and upload
    chandra

  • Urgent! How to change Asset Class in Asset Master Record

    EMERGENCY CALL!!!
    Hello,
    My customer has created asset with wrong asset class.
    Is there any chance to change asset class in master record, and if not please explain how to delete existing one and create new asset with right asset class.
    Note: the values are already posted to this asset
    Regards
    Amina

    1. Asset class cannot be changed anymore in asset master record.
    2. You cannot delete an asset which is already posted
    Solution for your problem:
    1. Create new asset with the right asset class.
    2. Do transfer asset using t-code : ABUMN from old asset (wrong asset class) to the new one (right asset class).
    Hope it helps

  • How to transfer main entities from instance A to instance B

    Hi community,
    Does anyone knows where to find a script to extract main entities (vendors/fixed assets/customers/items) from 11.5.10.2 to be imported to new fresh configured instance 11.5.10.2 using open interfaces?
    Thanks in advanced.
    Jaime Millan

    Hi Ganesh,
    According to your description, you want to know how to transfer the logins from one instance to another instance for SQL Server 2008 R2. To do this, besides dave’s post, you could also use
    'Copy Database Wizard' in SQL Server Management Studio, or the component
    'transfer Login task' in SQL Server Integration Services.
    Regards,
    Michelle Li

  • Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits?

    Where are the actual Aperture files located? Only in the application? I am transitioning to Lightroom and would like to only move some of the files. Advice appreciated. Also anyone know how to transfer in with edits? Using iMac, OS X, most recent Aperture and Lightroom 5.7 with plugin for Aperture.

    Define "the Aperture files".
    Read this concise guide.
    The files you imported into an Aperture Library can be exported (at any time, and repeatedly) using the command "File ▹ Export ▹ Originals".  Your Originals are never altered.  What went in is what comes out.
    Adjustments and changes to the metadata that you made since creating an Image in Aperture by importing a file are saved to a text file.  This file is combined, on-the-fly, with the Original to create the Image that you see in Aperture.  There is no file saved to disk that is the full-size Image.  Thumbnails are saved, and Previews are saved.  These are JPG files, almost always smaller than the Original.  They are not substitutes for the Image for the use you have.
    When you need a file of an Image to use in another program, you export the Image from Aperture.  "Export" means "Make me a file of this Image according to these file specs I'm providing".  The way to get files of your adjusted Images is simple:  create them by exporting.  Specify "Original size", and use a loss-less image-file format (e.g. TIFF 16-bit) if you want to retain as much visual information as possible.
    Search the Web for information about transitioning from Aperture to Lightroom.  Note that I say "transitioning".  You cannot move a database from one format to another without significant changes, and likely some loss of information.  Adobe provides a tool and some instructions.  I strongly recommend working out the process step-by-step, and then proceeding with first a few Images, then a bushel-ful, and stopping to use the first few, the the bushel-ful, before committing your entire collection to the process.
    As always, never use any computer file without having a back-up.
    We have seen mixed reports here of the success of the LR tool that creates a LR database from your Aperture database.
    If you want to carefully define the process, and test and refine it, use the excellent process-development, analysis, and execution program inShort.
    Sadly, there is not and can never be a good, thorough re-positioning of the digital assets in your Aperture Library to become digital assets in a LR database.  Just as a metaphor for any user contemplating transitioning to another digital asset manager:  that would be like digging up a house in one country, planting it in a hole in another country, and expecting to be able to use the toilet and the sinks, turn on the lights, cook dinner, and sleep soundly.
    HTH,
    Kirby.

  • How to Transfer Cost From an Internal Order to Another Internal Order

    Dear Sir,
    We had one Internal Order opened for Asset Under Commission (AUC) . We also had opened another Internal Order and cost were booked in this Internal Order also .
    Now , we want to transfer the complete cost from 2nd Internal Order to 1st Internal Order . During the Transfer , we want to maintain the same GLs (i.e in 2nd Order the GLs get credited and in 1st Order the same GLs must be Debited)
    Pl guide us , how to transfer the cost .
    Regards
    B Mittal

    You can do a regular FI posting debiting and crediting the same account, with a different internal order in each line item.

  • Intercompany transfer asset with NBV 1 and zero

    Can SAP R/3 system do the transaction intercompany transfer asset with
    NBV 1 and zero value?
    Beside, can SAP R/3 system perform creation of asset with NBV 0 and 1?

    Firstly, had try to create the new asset by T-code AS01 but i need to provide the depreciation period with zero value as the asset is fully depreciated with zero life depreciation. However, system do not allow for input zero depreciation period in the new asset. Kind advice, any configuration need to been set ?
    Secondly, I had try using the ABT1N to do the transfer of asset however it prompt me for entering the intercompany account need to setup? Kindly advise using ABT1N do we need to setup the intercompany clearing account? What are the double entry inccur/impact by using ABT1N to transfer asset?
    For your information, due to the lack of knowledge using ABT1N. We had try to do the manual retirement of asset and manual creation asset and posting the asset using t-code F-02 as mention prevouis question.
    I hope to know how to solve in both method to rectify the problem more effectively.

  • How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunesb

    how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunes......

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • How to transfer file from application server to presentation server in background?

    Hi Experts,
    How to transfer file from application server to presentation server in background?
    Thanks in advance
    Namita

    Thanks Raman and Challa,
    We want to move file from application server to Shared folder, not on local machine. We checked FM which you guys have provided but those are not able to read file from application server.
    We need this program to run in background so that we can use this in daily process chain.
    Appreciate your inputs on this.
    Thanks,
    Namita

  • I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.

    I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.

    kellyfromdanville wrote:
    I am new to Apple!
    Ah, new to routers too.
    Perhaps it's best to have a local computer support person come set you up?
    To explain everything would require writing a book here.
    But this is what you want basically.
    Router, new Wireless N, firmware updated.
    1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
    (guest password to max password length of any iDevices)
    2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
    3: Guest access on devices and computers only.  Passwords written down and stored.
    4: OpenDNS preferred but not mandatory.
    If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
    What your doing now is running the bare bones unsecure router which can be used harmfully against you.
    Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution.

  • Report for track the assets history only for transfer assets through ABUMN

    Hi experts,
    I am transferring the some value from one asset to another asset through ABUMN, is there any report to see the this kind of transfer assets
    useful answers duly rewarded

    Hi,
    You can view the intra-company transfer report S_ALR_87012054.
    Thanks
    Jagdish

  • I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. How can I do this to ensure all videos and music transfer over and not just purchases?

    I am going to buy a Mac desktop and want to know how to transfer all my purchases and uploaded music from my PC. I originally started using iTunes on my PC so it has everything I have ever purchased or uploaded from my own collection of music.
    How can I do this to ensure all videos and music transfer over and not just purchases? Do they do it at the Apple Store or at Best Buy? help!

    Move iTunes Library from PC to MAC
    http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
    Also, See here if you need to...  iTunes to an External Drive
    http://support.apple.com/kb/HT1751

Maybe you are looking for

  • T42 extension monitor won't work

    Hi, hoping somebody can help. Bought a seconhand T42 thinkpad that already had windows 7 (originally XP) . Had blue screen problems so computer repair chap did something with the video card driver and now it works fine but i cannot display an extensi

  • Query mode in forms

    Hi, (anyone please help me out) I have two blocks namely recmast and recdet blocks. Recmast block deals with mater table for customer receipts and recdet block deals with corresponding invoices that are applied against the money receipt for a custome

  • Canonical Form on XML Message

    Is there a way of producing a canonical form of an XML message from Java? Also, does anyone know of a good tutorial about canonical form. I have tried reading the W3C paper on it and found it completely illegible. Thanks in advance, Adrian

  • Relating two Relational Models using Keys

    Is there a possibility to relate two different relational models containing tables in each. for e.g. i have a relational model1 with table 1 and in another relational model2 i have another table 1. The table 1 in RM 1 contains a primary key which is

  • Using php/mysql for calculations

    Hi guys, Im experimenting with calculations on a site but im not sure whats the right way to go about it. the result im looking for is this,, Im setting up a personality test on the website where the questions he answers should classify him into one