How to transfer backup from another external drive

Have a LaCie making clicking sounds ...about to go. Should I transfer my docs to a disk before buying the Time Capsule ? How do you transfer info to the Time Capsule?

Transfer any documents you have immediately back to your Mac.. if they are not just backups..
If you don't have space then yes, get another external drive.
The TC is for TM backups.. if you mix backups and data on it, can lead to issues.. also the TC is not designed to store files.. we recommend against it.
The info is here though.
http://pondini.org/TM/TCQ3.html
The TC is just a network drive if you copy to it, just standard copy and paste via finder.

Similar Messages

Cannot transfer Time Machine backups from one external drive to another

Since I bought my 13 inch MacBook Pro in September 2014 I've been keeping Time Machine backups on an external 1TB Lacie Rugged. This is partitioned into three and one of the partitions contains my iPhoto library.
Last weekend I left my MBP disconnected from the power source but with the external hard drive still plugged in. Long story short - the battery level fell below the minimum needed to operate so it turned itself off and 'disconnected' the external hard drive. This resulted in a corrupted iPhoto library which is no longer accessible.
In order to restore my iPhoto Library from another backup I needed to buy a second external hard drive. Yesterday I bought a 2TB Lacie Rugged which I've now partitioned into 5.
I want to move my Time Machine backups from the 1TB Lacie Rugged to a partition on the 2TB Lacie Rugged (to take advantage of the new Lacie's Thunderbolt connection).
I read the Apple article -
HT202380: Time Machine: How to transfer backups from the current backup drive to a new backup drive
and followed the instructions precisely. About 2 hours into the transfer I came back to my MacBook Pro and saw a message saying that it was not possible to complete the transfer because I did not have the correct permissions. The only option was to click the OK button which stopped the transfer.
Can anyone advise what I should do next?
Cheers
Tricia

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

How do I transfer files from an external drive to my IPad air

How do I transfer files from an external drive to my new IPad air with wifi?

Does your hard drive have an app? there needs to be some soft of app to facilitate the data transfer.

How I can backup from another Hard disk through my Macbook air?

How I can backup datas from another external storage disk by using My Macbook Air?

How I can backup from another hard disk through my Macbook air in Time Capsule?

How do I boot from an external drive?

I've just Carbon Cloned my 60GB drive to a firewire external drive. I'm about to replace the 60GB with a 160GB drive and the CCC instructions say boot from the external drive I'd just created once the new disk is installed. Then CCC the cloned drive back to the new hard drive.
So, how do I boot from an external drive? Do I have load anything to the new drive? Will the macbook detect the external drive and boot from that? Or what??????
Thanks
Dick

Thanks DWB. Being the rash impetuous guy I am I didn't wait for replies and just switched on the macbook after installing the new disk (which was so easy it was unbelievable - had to go and buy a a little torx bit though) to see what would happen.
Blow me down with a feather if it didn't just boot off the external drive all by itself :-O It did come up with the disk was unverified and I could see it in FINDER and I was prseented with a screen to ERASE/RESTORE etc.
When I went to CCC the external drive back to the new hard drive it didn't give show me the new hard drive so I guessed I'd have to do something to format (?) the hard drive.
I don't know if I did the right thing but I went to disk utilities and chose ERASE in the vague hope it would maybe format the disk in some way.
Seems to work now and the CCC replaced the system perfectly as far as I can see.
Basically very impressive all round. Piece of proverbial to replace the disk and CCC made life so easy.
Thanks again.
Cheers
Dick

Transfer Time Machine backup from one external drive to another

Surely this has been covered, but I can't find it.
If you have your time machine backup on an external drive and get a new (larger) external drive, what is the best way to transfer the backup from one drive to the other (and define the new drive as the backup drive)? Straight copy ? Then to define the new drive, rename old drive to something else and name new drive the backup name?

I haven't tried this yet but a few other methods are described at http://www.macosxhints.com/article.php?story=20071128055047339

Can I transfer data from one external drive to another using my MacAir as a platform?

I am trying to transfer about 94 Gigs of data from one external drive (Touro) to another (Seagate) using my Mac Air which only has about 14 Gigs of available space. How best can I accomplish this operation?

Niel - I know that I must be a real dunce on this. I tried opening the additional window on finder and then dragging and dropping from the Touro drive to the other open finder window for the Seagate drive. Again, it bounced back. What is NTFS? And how do I find if either or both of the drives are formatted in that manner?
Again, thanks for you help on this.
JC
PS I just got the info on the Seagate that it is Windows NTFS formatted. What do I do now? Is Paragon something I can download off the Internet? Why, since I formatted the Seagate to run on my Mac Air would there still be a problem? The packaging on the Seagate says it is compatible with Mac OS systems. jc

Restoring backup from an external drive

Hi,
My pictures (originals) were stored in an external drive, library in the default location and the preference "copy items to the iphoto library" off.
Yesterday my external drive just stopped working now iphoto can't show me any picture anymore!!
I backup this external drive into another daily, so I have a copy of all originals (same structure) in another external drive.
How can I instruct iphoto to redirect to this other drive the smoothest way possible?
Thanks,
jp

Welcome to the Apple Discussions.
This is the major weakness of running iPhoto in Referenced Mode.
Let’s try the easy one:
1. Make sure the alternative disk has the exact same name as the damaged one, so that the path to the files is the same.
If that fails:
2. Select a photo in an Event in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). It will tell you that it cannot find the file and ask if you would like to locate it. Do.
If you’re lucky, you’ll only need to do this for one file per Event, as this will connect up all the other files in that Event.
If you’re unlucky you’ll need to do this for every pic in your Library.
Regards
TD
Jim: Your suggestion won’t work because the Library is not on the disk, only the photos.
Message was edited by: Terence Devlin

Time machine. How to make backup from an external HD

I need to learn how to use Time machine to make backups from an external hard disk in a network nas.
We have been able to make backup of the information that is in the computer, but we need to protect the information that I have inthe external disk.

Dear Mr. Root
Folllowing your instructions we observed that the drive has been excluded, but I can not select it, and for this reason when I hit the - at the bottom I can not remove it.

I just got my first Apple product (ipod touch) and am needing to know how to transfer music from another itunes list. Can music that is currently on another ipod and/or computer be transferred to my new touch and my new itunes account? Thank you!

Recently purchased my first Apple product (ipod touch) and am needing to know how to transfer music from other ipods and other itunes accounts. Can this be done? I have plugged in another ipod into my new itunes account and it will not let me transfer the music that it contains into my new account. Any/all help is much appreciated. Thank you!

I have no music in my itunes account yet. I am trying to transfer music from friends' accounts and their ipods/playlists.

How to transfer itunes library to external drive and keep playlists and ratings

I don't have much space on my laptop. I have attached an external drive. I want to access my Itunes library from
the external drive. All attempts to move the library now result in me losing my "playlists" and even more importantly
my ratings and genre information.
How can I move the library with all my associated data intact such as the playlists, ratings, genres?
I want this external drive to be the main location where I access my Itunes library.
Once that is done I will work on backing it up, as that will be the only place that the data exists.
Also, will my Apple TV be also be able to access my Itunes library with playlists. thus far I have not been able to do this.

Start by consolidating your library. When you consolidate, any songs in the iTunes Library that are not in the iTunes Music Folder are copied to the Music Folder and the Library is updated to point to those new files. Files already in the iTunes Music Folder have no changes made to them: Consolidating your library - Windows
Then copy the iTunes Folder to your external drive. Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
Disconnect your external drive and connect it to your new computer, copy the iTunes folder to the new pc. When you copy the iTunes folder make sure you put it into the default location on the new computer. On a PC this is \Documents and Settings\Username\My Documents\My Music\ (or C:\Username\Music\ in Vista). You should also use the same version of iTunes on both computers.
Once you have copied everything over hold down the Shift key in Windows when opening iTunes. In the resulting dialogue you will get the option to create a new library or navigate to an existing one. Navigate to where you placed the copy of the library file and open it up: How to open an alternate iTunes Library file
If you have any iTunes purchases in your library don't forget that you'll need to authorise your new computer to play them. Also if you are disposing of the old one remember to deauthorise it so you don't use up one of your allowances: About iTunes Music Store Authorisation and Deauthorisation

How do you boot from an external drive when internal drive is dead?

The internal drive is dead, but I have a complete dupolicate on my fire-wire external drive. I think I remember reading that there is a combination of keys to press down when starting to allow one to choose which drive to use as a startup volume. As it is, the thing won't start up at all.
So I know it's supposed to run from the external drive, but how do you get it to boot from it without having designated it as the startup when it was last running?

Hold down the Option key when booting the computer.
When I asked the question I was working on my daughter's ibook.
Now I'm back home and I have a firewall external drive, so I tried pressing option when I started and icons for startup drive come up BUT there is only one icon -- that being for my internal drive. I know that the external drive, which has a duplicate of the internal, is capable of starting it up ok, because when I go ahead and , after starting it up on the internal drive, then pick the external drive to start and then restart it, it goes to the external drive ok. But again, if it has been preferrenced to start on the internal drive and I do the thing by pressing with option when I start, it doesn't give me the option to use the external drive. (The external drive is partioned, and the duplicate startup is in one of the volumes, but I don't think this should have anything to do with anything, since it can start up using the appropriate external hard drive volume when I have selected it in my preferences.)
G4 tower Mac OS X (10.3.9)
G4 tower Mac OS X (10.3.9)

How do I move from one external drive to another, without the "Relocate Masters" command?

I have my masters referenced on an external hard drive, and I've been mirroring that drive with another so that I have a backup (the volume names were ApertureLib1 for the primary drive and Photo7 for the backup). I've filled that drive, so it will no longer be my primary master drive (i.e. all new masters going forward are going on a new, separate drive). I want to keep one of the two drives online and put the other away as an offsite backup.
The catch is that the primary drive (ApertureLib1) does not place nicely with my Lexar Firewire 400 CF reader; when I insert or eject a card, it has a habit of disconnecting itself. The backup drive (Photo7) does not exhibit this issue. So I decided that I'd just rename Photo7 to ApertureLib1 and be on my way; the folder containing all the masters (PhotoLib) is mirrored by using Arrsync (an rsync GUI), so all the files should be there.
Great theory, except that Aperture does not recognize the renamed Photo7 drive as ApertureLib1, despite the system seeing it as such (both in the Finder sidebar and showing up in /Volumes as "ApertureLib1"). The "locate referenced masters" dialog shows ApertureLib1 as 'offline' and does not give me any opportunity to point to the second drive as the master location.
I assume that Aperture is somehow tracking a separate unique identifier for the drive. Does anyone know what this might be and how I might convince it to treat the was-a-backup drive as being the One, True Location for this set of masters?
Many thanks.
(and I really don't want to use "relocate masters" because I'd first need to delete the exsiting copy on the second drive and then move over all of the images from the first drive, before copying them back to have a backup)

Hi Kevin,
I understand what you tried to do but it doesn't work that way. Swapping drive names will just mess things up.
You should be able to reconnect the files though: in the Locate Referenced Files dialog make sure you click the Show Reconnect Options button — this will give you access to all the connected drives. Locate one of the files and hit Reconnect All. Should do the trick.
Best

How do I transfer data from an external drive?

I have a mac mini and i want to transfer some, but not all data from it to my new macbook air. The person at the Apple Store told me i could use my external drive to do this by connecting it to my macbook air. I'm a bit confused on how to get this done. Also, when i transfer the data, do i open and drag and drop into the applications, i.e. iPhoto, Numbers, etc., or onto the hard drive?

I have used the external for backup for the mac mini. It already has all of the data on it.
I am trying to take data from the external and put it on my macbook air.
This is what the guy at the Apple Store told me to do. He said I could just drag and drop any of the data in this manner. I'm confused by your reply. Do I just not understand your explaination?

My experiences copying Time Machine backups from one external drive to another

I am reposting this. The first one was rejected because it contained 'product feedback' and I was directed to the 'Terms of Use'. The 'Terms of Use' say feedback is welcome...***?!?
My 3TB external drive started to die a few weeks ago. It was still under warranty and I just got the new one yesterday. I wanted to preserve all my backups (I had every backup for my late 2012 iMac) on it.
The short of it is that there were like 20-25 million files there or something crazy like that. Finder was going to take forever to count the files. cp and rsync would take like a week. I decided it wasn't worth the hassle, so I just securely erased the old disk and did a new initial backup on the new disk.
The old disk would only mount in read-only mode, so I couldn't prune the backups down to a manageable size. Unless you only have a handful of backups, or you can internally mount the drives to make it go faster, it's going to take forever to do this.
Regards, Patrick

Hi Eric,
Thank you for your response. I came across another thread yesterday which suggested the Restore via Disk Utility method. It worked for me, too. This was after I had tried following the method suggested in the Apple article above three times but each time the message was the same ....
The operation can't be completed because you don't have permission to access some of the items.
I dare say that Apple would like to have us believe that it's a simple matter of 'drag and drop' but it certainly wasn't for me. From what I've read the permission problem crops up fairly frequently. Before the second and third attempts I had already amended Permissions on the Time Machine backups so that everyone could read and write, so that mustn't have been the problem. I'm the only person who uses my computer so that's not a problem.
The next problem I have is that I decided I would use the Restore route to transfer my SuperDuper clone rather than start from scratch. Unfortunately, the partition size on my original backup disk where SuperDuper clone is is 350GB and the size of the SuperDuper clone partition on my new backup is 300GB.
Of course, Apple says you can resize partitions using Disk Utility. What they don't say is you can downsize partitions but (in my experience and that of many other frustrated users on various forums) you CANNOT upsize using Disk Utility. I have 100GB spare on my external hard drive (from downsizing two partitions by 50GB each) BUT there is no way Disk Utility will let me increase the size of SuperDuper partition to 350GB :-(((
Cheers
Tricia

How to transfer backup from another external drive

Similar Messages

Maybe you are looking for