How to transfer data between the different states in "state machine"?

I want to transfer some data from one state to another. I tried the tunnel, but it can't work since it's the case structure. Does "state machince" support data transfer? Or any other methods I can do?
Thank you.

Yes, adding a shift register to the outer while loop should work, make sure to initialize it. Perhaps you could attach your vi so we could have a look at it. Be sure to give us as much info as to what your goal for the vi is.
Cheers!
CLA, CLED, CTD,CPI, LabVIEW Champion
Platinum Alliance Partner
Senior Engineer
Using LV 2013, 2012
Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

Similar Messages

Use of SAP memory to transfer data between two different sessions.

Hello experts,
I wish to know how to use SAP memory to transfer data between two different sessions.
The scenario is that when I run a report and change a variable, the value of changed variable should be availabe to another user on another terminal.
Thanks & Regards!
Sumit

Hello,
Just to add what Max has already mentioned. IMPORT TO / EXPORT FROM DATABASE statements can be used to store data in special "cluster" tables (you can't use any DDIC table) e.g., INDX.
@OP: You can opt for Shared Memory(SHM) for this specific requirement as well. In my opinion SHM is a bit tricky to code, but it is easier to monitor. The opposite holds true for "data clusters".
You should remember SHM is app-server specific. So if you've a load balancing scenario, using SHM can cause problems.
Hope i'm clear.
BR,
Suhas
Edited by: Suhas Saha on Nov 19, 2010 4:12 PM

How to transfer data between a multi-thread dll build with LV7 and MS C++, using envent programing method.

It is easy to transfer data between a simple input/output dll build with LV and an external code like C++, but when data are available inside a loop running in the dll(in fact thread running in LV); How can I read them or receive an handle pointer to the calling C++ application when new data are ready.

If you're using LabVIEW 7, you can use the PostLVUserEvent function to fire an event for an event structure in LV. Refer to the Using External Code in LV manual.
Or you could use datasocket for this. The datasocket activex dll is nids.dll. You could have the class wizard generate wrappers for you or if you have Measurement Studio, you could use the custom wrappers it provides to communicate between the VI and dll.
I hope this helps
Bilal Durrani
NI
Bilal Durrani
NI

How to exchange data between the html in the form layout and itsparameters?

i am trying to rephrase a question i asked a few days back and which yielded no response.
is there any way to exchange/transfer values or data between the html in the form layout editor and the form parameters?
for instance, is there any bridge such that the form template design (controlled by some html-based attribute), or the display property (again managed by some string value for the style:display attribute) of some of its divisions etc could be controlled by the values passed to some parameters of a portal form?
has any body ever tried to do it or thought of doing it? or it's inherrently beyond the portal forms capacity?
folks, any clues or hints on 'yes, that's how' or 'no, and that's why not!' please? will greatly appreciate.
Naqvi

i am trying to rephrase a question i asked a few days back and which yielded no response.
is there any way to exchange/transfer values or data between the html in the form layout editor and the form parameters?
for instance, is there any bridge such that the form template design (controlled by some html-based attribute), or the display property (again managed by some string value for the style:display attribute) of some of its divisions etc could be controlled by the values passed to some parameters of a portal form?
has any body ever tried to do it or thought of doing it? or it's inherrently beyond the portal forms capacity?
folks, any clues or hints on 'yes, that's how' or 'no, and that's why not!' please? will greatly appreciate.
Naqvi

How to transfer data using the clipboard

Does anyone know how to transfer data (string) from the clipboard to labview?
I am trying to write C++ code using win32 API using the calls, OpenClipboard, Getclipboard and CloseClipboard functions. The problem is LV crashes when there is a call to the library function. Perhaps I am going about this the wrong way.
Any ideas are appreciated.

Perhaps this approach will give you the answer. I wrote a VI that uses the Win32 API directly. It calls OpenClipboard with the calling VI's window handle, then calls GetClipboard with the GW_TEXT constant to get a memory block handle. I lock the memory block with GlobalLock so other applications can't mess with it. I next call lstrcopynA , initializing a arg1 as a C String with 256 bytes and using the memory block handle as arg2, with the length of arg1 minus one as arg3. Your clipboard text is in the string output. Now call GlobalUnlock and CloseClipboard and you're done!
Attachments:
getclipboarddata.llb ‏168 KB

How to transfer data between planning functions in BPS

Hi All,
I have requirement, where user will enter the sales qty plan in manual planning function and need to read the zinfo object to distribute the sales qty accordingly to manufacturing plant and push into infocube.
To fulfill above requirement, i'm thinking to create one manual plan and user will enter the total sales qty and create one more exit planning function to distribute the sales qty for each plant.
For above approach, i need to get the data enter in mannual planning function to exit planning function.
Can anyone let me know how to transfer data from one planning function to other planning function under same planning level and package.
Thanks you,
santosh.

Hi Santosh,
You can achieve the Distribute functionality using the Standard Planning Function for Distribute (Refer SAP Help for details).
Moreover you would not have to do anything specifically to transfer data from one Planning Function to another. The application picks up the latest data records for processing whatever Function you are executing. If you want to execute a series of Planning Functions you could use a Planning sequence to achieve the same.
Hope it helps

ODI: How to transfer data between Essbase apps

Hi,
I'm using old Planning version 3.5 on Essbase 7.1.6. It has no partition options between apps. XREF function work slowly. I need to transfer data with transformations between two Essbase Apps. I'd like to use ODI 10.1.3.6.4 to do it. I'd like to transfer data between essbase apps via Staging Area.
1. What units of LKM, IKM, RKM to me need to be used?
2. How to create datasource for Essbase in ODI?

I've found "Compatible software: Essbase 7.1.6 (Data Load & Data/Metadata Extract Only)" information here
http://download.oracle.com/docs/cd/E15985_01/doc.10136/readme/DIHER.pdf
John, I use your blog as a short ODI guide. Thanx a lot of!
Besides, I've found "Getting Started with Oracle Data Integrator Adapter for Hyperion Essbase" - informative source
http://download.oracle.com/docs/cd/E15985_01/doc.10136/getstart/DIAHE.pdf

How to transfer data between different tables in an Oracle 10g databse?

I have to do the following: there are 5 database tables in our Oracle 10g database that store certain data. Then there are 2 new tables where we want the data to go to. My task is to somehow transfer all the data that is in the first 5 tables and insert it in the 2 new ones. All tables are in the same database. The challenge lies in the fact that the structures of the tables are very dissimilar so it won't be a matter of a simple INSERT SQL query.
The data access tier of our application is developed in JAVA. We use EJB. So one way I am thinking of doing the above mentioned data transfer is to simply code it in the JAVA backed. But that might be to slow, there are millions of records in those first 5 tables. What is the best way to do something like that? Perhaps a custom (Perl?) script or some such?
Thanks.

The problem is that the way the data is stored in the old tables you cannot write a query that would return it in such a format that you could immediately insert it in the new table without some formatting. Let me illustrate with an example. To pull the data from the old tables I use this query:
SELECT
     SXML_DOCUMENT_DATA.VALUE As DocumentValue,
SXML_ELEMENT.NAME As ElementName
FROM
     SXML_DOCUMENT,
     SXML_DOCUMENT_DATA,
     SXML_DOCUMENT_DETAIL,
     SXML_ELEMENT,
     SXML_TYPE
WHERE
     SXML_TYPE.XML_TYPE_KEY = SXML_DOCUMENT.XML_TYPE_KEY
AND     SXML_DOCUMENT.XML_DOCUMENT_KEY = SXML_DOCUMENT_DETAIL.XML_DOCUMENT_KEY
AND     SXML_DOCUMENT_DETAIL.XML_DOCUMENT_DETAIL_KEY = SXML_DOCUMENT_DATA.XML_DOCUMENT_DETAIL_KEY
AND     SXML_ELEMENT.XML_ELEMENT_KEY = SXML_DOCUMENT_DATA.XML_ELEMENT_KEY
AND     SXML_TYPE.NAME = 'DA_UNIT_COMMITMENT'
AND     (SXML_ELEMENT.NAME = 'resource'
     OR SXML_ELEMENT.NAME = 'resourceType'
     OR SXML_ELEMENT.NAME = 'commitmentType'
     OR SXML_ELEMENT.NAME = 'startTime'
     OR SXML_ELEMENT.NAME = 'endTime'
     OR SXML_ELEMENT.NAME = 'schedulingCoordinator')
ORDER BY
     SXML_DOCUMENT.NAME,
     SXML_DOCUMENT_DETAIL.XML_DOCUMENT_DETAIL_KEY,
     SXML_DOCUMENT_DATA.XML_DOCUMENT_DATA_KEY,
     SXML_ELEMENT.NAME;
The results from the SQL query above look like this:
DOCUMENTVALUE | ELEMENTNAME
1 | ALAMIT_7_UNIT_1 | resource
2 | GEN | resourceType
3 | BRS8 | schedulingCoordinator
4 | IFM | commitmentType
5 | 2008-07-29T18:00:00:00 | startTime
6 | 2008-07-30T00:00:00 | endTime
7 | ALAMIT_7_UNIT_1 | resource
8 | GEN | resourceType
9 | BRS8 | schedulingCoordinator
10 | IFM | commitmentType
11 | 2008-07-29T00:00:00 | startTime
12 | 2008-07-29T04:00:00 | endTime
and so on. The type of data repeats every 6 records. And the values of each 6 records corresponds to 1 row in the new table, which looks like this:
schedulingCoordinator | resource | resourceType | commitmentType | startDate | endDate
1| 1 | 27 | GEN | IFM | 2008-07-29T18:00:00:00 | 2008-07-30T00:00:00
2| 1 | 27 | GEN | | 2008-07-29T00:00:00 | 2008-07-29T04:00:00
So hopefully now you see the challenge. It is not as simple as writing a SQL query that returns result rows corresponding 1 to 1 to a row in the new table. Somehow I need to take the first 6 result rows from that big SQL query and put them in the first row of the new table. Then the next 6 and put them in the second row and so on. And also, we are talking about millions of records. What happens if I process the first 2 million and then some error occurs? Do I start from the beginning again? One idea I have is to process the data in chunks, say process 500 results, commit, process another 500, commit, and so on.
Edited by: 799984 on Oct 11, 2010 9:08 AM

How to transfer data between laptops?

The keyboard on my old MacBook Pro is no longer working. How do I boot it up, via firewire, from my newer MacBook Pro? I want to access the data housed on the broken laptop and transfer it to the newer, working one.

Hi A,
MigrationAssistant
http://support.apple.com/kb/HT4413
Tipsand Tricks: http://support.apple.com/kb/HT3231
http://docs.info.apple.com/article.html?path=Mac/10.6/en/27921.html

How to transfer data between two tables

Hi friends i have got a new problem actually i'm a fresher in this SAP so i have a doubt in SAP Smart Forms the problem is like this
I have a data element common in both of the tables BSEG and KNA1 and the common data element is KUNNR so i want to transfer all the data in the table BSEG to KNA1 of the same data element(KUNNR) in which there is data regarding customer information so i want to transfer the single customer data into another table KNA1 and i want to display the data in the output plz any one can help me.

hi.
the below metjhod u can adopt.
1)
select data from 1st zable to internal table.
2)insert data from internal table to 2nd ztable simple.
data:begin of itab occurs 0.
include structure ztable_structure1.
data:end of itab.
select * from ztable into table itab.
modify ztable1 FROM TABLE itab.
3 ) ike that u can catch date from other table.
4) if any condition is there u can check it in the internal table.
Rgds
Anver
if hlped pls mark points

How to transfer data between different nodes of the same context.

Hi experts,
I am working on an application in ABAP webdynpro in which i want to copy data from one node to another node in the same context of a view and both the nodes are mapped with different nodes of context of component controller. How to code this. Please help.
Thanks and Regards.
Vaibhav Tiwari.

Hi Vaibhav,
you are in the wrong forum.
BTW: Copying value of nodes is done automaticcally if you connect the nodes.
Regards Mario

HT1296 How to transfer data between 2 iphones while not having the old one

How can I transfer or sync all the data from my previous iphone to the new one while not having the first(it's not working due to high voltage problem of the area),and of course not loosing anything?

Correct, you do not need your old iPhone. All you need is your old iPhone's backup. If you had an old model iPhone and wanted to replace it with a newer one, restoring it from a backup of your older one would be the process you would use.
Make sure before you start that your new iPhone is either really new or completely erased. If you did not just buy it new, do Settings > General > Reset > Erase all content and settings before restoring it from your old iPhone's backup.

How to transfer data between spreadsheets without using Business Objects?

Hello, every time I try and log onto the business objects platform I keep getting "this system can be contacted but there is no central management server running at port 6400". All I need to do is pass variables between spreadsheets. Both files are located in the same folder. Below are the links ive tried but have been unsuccessful to pass data.
(This link I used the swf loader component child and flash variables task Daya posted on Feb 15. However nothing loaded. The link wasnt a link i could display is in a browser. So i kept getting 0% when in preview mode.
Passing values from dashboard to dashboard with Flash Variables
Next I tried the following link. I did everything word for word and was able to display both files on the html page, but no link or connection between them existed. I would select a state and noting happened to the other swf files chart. Does this need to be in the Business Objects platform?
Dashboards 4.0: Connect to an external
Lastly , I used the link below. I followed everything and was able to get interaction from the parent to child however with only the files that were available on this thread. Their URL was this http://myxcelsius.com/wp-content/uploads/2010/10/child.swf?salesman=Schrute,Dwight. I get the concatenation but I dont get how this URL was generated? How do I develop my URL? My URL is able to display in a browser. My URL is
http://kln-ftvp/KLNPheonix//LinkToReport.htm?fqn=MyEnterprise.Public.graphtest&run=true
SWF Loader shows 100% instead of Dashboard.
Even with my URL being able to display in internet explorer, I still only show 100% and a blank screen. Can anyone help me with any of the issues I am having trouble with? Your help is most appreciated. Thank you.

It looks like you have more than one problems so it might be good to separate them out.
Issue 1 - Logging on to BusinessObjects
You say that when you try log on to the BO Platform you get the error message there is no central management server running on port 6400. I'm assuming you are trying to do this from the Dashboard designer.
Does it work when you try to log on from the web browser?
Make sure that you enter the correct system name in the system field when trying to log on from Designer. If you are unsure, either check what system name is used when you log on from your browser or check with your BO administrator.
Issue 2 - Passing values to a child dashboard
If you try to preview the dashboard in the designer, remember that the swf loader doesn't work in preview mode, so whatever you are trying to display won't be visible.
First of all you need to have 2 separate flash files that works independently of each other. The one that you are planning to use as a child flash, make sure that you create the flash variables so you can pass variables to it and use them to filter your data if that is your requirement. But hold off on that for now.
When you have 2 working flash files, save them both to the BI Launch Pad (or InfoView if you are on 3.1) and make sure they both work there. Then get the opendocument url for the child dashboard and try to open it in your browser directly using this url. If that works, use the same url in the swf viewer in the parent dashboard, save the parent dashboard back to BI Launch Pad and open it. It should now work.
Let me know if you have any problems with these steps.
Cheers,
Josh

How to transfer data between spreadsheets

I have created 2 identical spreadshhets and want data changes made in table A to be automatically changed in table B. Can anyone explain how I do that ?
Thanks

It looks like you have more than one problems so it might be good to separate them out.
Issue 1 - Logging on to BusinessObjects
You say that when you try log on to the BO Platform you get the error message there is no central management server running on port 6400. I'm assuming you are trying to do this from the Dashboard designer.
Does it work when you try to log on from the web browser?
Make sure that you enter the correct system name in the system field when trying to log on from Designer. If you are unsure, either check what system name is used when you log on from your browser or check with your BO administrator.
Issue 2 - Passing values to a child dashboard
If you try to preview the dashboard in the designer, remember that the swf loader doesn't work in preview mode, so whatever you are trying to display won't be visible.
First of all you need to have 2 separate flash files that works independently of each other. The one that you are planning to use as a child flash, make sure that you create the flash variables so you can pass variables to it and use them to filter your data if that is your requirement. But hold off on that for now.
When you have 2 working flash files, save them both to the BI Launch Pad (or InfoView if you are on 3.1) and make sure they both work there. Then get the opendocument url for the child dashboard and try to open it in your browser directly using this url. If that works, use the same url in the swf viewer in the parent dashboard, save the parent dashboard back to BI Launch Pad and open it. It should now work.
Let me know if you have any problems with these steps.
Cheers,
Josh

How to transfer app data between two different game center accounts?

Hello, I really need some help.
I have looked all over the web for ways to transfer apps between two different game center accounts and different devices. Several weeks ago I started playing Campus Life on my relative's Ipad 2, therefore spending many long hours to get to this point in the game.
The problem is I just got an Iphone 5 and I really would like to transfer the data onto it, so that I would not need to start all over again.
My grandma has an account (Game Center) onto which the data has been saved and I would like to have it stored onto mine. On some forum someone said to sign into the account which has the data on both devices and to then open up the game on the new device. It worked. Then I signed out and logged in with my own account- the game started from scratch. I panicked. I went back on the other account, and the data reappeared. I have been going back and forth, the game changing as many times. I thought it would ask to back up my grandma's data on mine but I was wrong. I can not seem to save the game onto my new account, and I have even tried to back it up to Itunes and then copy it onto my phone after having signed into my own account. And I don't know how to properly use Icloud. I am a mess. I am completely lost and have found no help on the web. (All people seem to have to deal with is sharing Apple IDs with different Game Center Accounts for the kids and transferring apps from one of their devices to another.)
I am so worried I am going to mess up and will lose the whole thing completely.
I have just started another game with my own account but since I am using my grandma's, the data is erased. It's one or the other but I definitely prefer saving Campus Life. I do not like the idea of having to only pick one.
I do not know any technical terms, so if you understand or even have the slightest clue about what I am talking about, I applaud you.
This seems like mission impossible, so if anyone can help in any way, I would be really grateful.
Thanks in advance for your time and thoughts!

I meant to press on "This solved my question"... Sorry if you needed the points.
Thank-you and I will just go back and forth between the accounts.

How to transfer data between the different states in "state machine"?

Similar Messages

Maybe you are looking for