How to Transfer IDoc Type to Data Type in XI

Dear All,
I am working on scenario to transfer data(IDoc) from SAP System to Non SAP system through XI.
While Defining "Data Type" in XI i want to create Data Type as of IDoc type(CREMAS05).There is any direct method to import IDoc type into "Data Type" in XI.
thanks,
RP

Hi Rp,
External definitions enable you to import WSDL, XSD, and DTD documents to the Integration Repository so that you can access the message definitions they contain as external messages.
If a description of the message structure already exists in one of the above formats, you can use it in the Integration Repository by importing it as an external definition rather than re-entering it manually using the data type editor.
Prerequisites
The document to be imported must conform to the WSDL, XSD, or DTD standard.
Chk out all the details + how to import Ext Def:
http://help.sap.com/saphelp_nw04/helpdata/en/26/9e97b0f525d743882936c2d6f375c7/content.htm
Also refer...
Connection Using Adapters and Imported Interfaces
http://help.sap.com/saphelp_nw04/helpdata/en/4a/576d219c340844aaa12ce9bbc2c3ee/frameset.htm
Incase u want to chk out the details of Idoc scenario.....
IDoc to File:
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
Handling different partners for IDoc:
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/file%2bto%2bidoc
Hope this was helpful..
kanan

Similar Messages

How to transfer IDOC - E1EDL24 segment data into my_itab?

Hi Experts,
Am trying to transfer data from a Segment-E1EDL24 to an itab of fs_itm_data.
data: begin of fs_itm_data,
tapos(6),
nista(18),
altme(3),
end of fs_itm_data.
So, when u see this E1EDL24 segment in WE31, there are lot of fields in it.
And am getting the data as,
idoc_data-segnam = E1EDL24
idoc_data-sdata = 00001012345678 (i.e. POSNR+MATNR)
So, to do dump this segment data into itab, am wrting code by using OFF SETTIng ; like,
fs_itm_data-tapos         = edidd-sdata+0(6).
fs_itm_data-nista         = edidd-sdata+146(15).
fs_itm_data-altme         = edidd-sdata+161(3).
1 - but, I dont think that, this is correct practice
2 - if there is no value for Alt UNIT of edidd-sdata+161(3), wht happens?
3 - If MATNR varies in its length, like 1 - 18?
so, let me know that,
1 - How to transfer this segment data into this itab?
THANQ

If I understand ur requirement correctly then u need to move idoc_data-sdata to an internal table itab.In that case no need to move data from idoc_data-sdata to itab directly using OFF SETT.
1st declare one wrokarea of type E1EDL24.
data: w_E1EDL24 type E1EDL24.
Now move the content of idoc_data-sdata to the workarea.
move idoc_data-sdata to w_E1EDL24.
Now u can do field by field assignment to move data from w_E1EDL24 to ur table.
fs_itm_data-tapos = w_E1EDL24-tapos.
fs_itm_data-nista = w_E1EDL24-nista.
fs_itm_data-altme = w_E1EDL24-altme.
Here I am assuming that field names in the structure fs_itm_data are same as field names in the segment w_E1EDL24.
Regards,
Joy.

New Effective CAL essay: How do I create an abstract data type in CAL?

How do I create an abstract data type in CAL? An abstract data type is one whose internal representation can be changed without needing to modify the source code of client modules that make use of that type. For software maintainability, it is a good idea to make a type that is subject to change or enhancement into an abstract data type. Another reason to create an abstract data type is to enforce invariants for values of the type that can only be ensured by using constructor functions (i.e. functions that return values of that type). In principle it is simple to create an abstract data type in CAL. For an algebraic data type, make the type constructor public and all data constructors private. For a foreign data type, make the type constructor public and the implementation scope private. If a scope qualifier is omitted, the scope is taken to be private. For example, the Map algebraic data type has the public type constructor Map and the data constructors Tip and Bin are each private, so it is an abstract data type. /** A map from keys (of type {@code k@}) to values (of type {@code a@}). */ data public Map k a = private Tip | private Bin size :: !Int key :: !k value :: a leftMap :: !(Map k a) rightMap :: !(Map k a); There are a number of invariants of this type: the size field represents the number of elements in the map represented by its Bin value. The keys in leftMap are all less than key, which in turn is less than all the keys in rightMap. In particular, non-empty Map values can only be created if the key parameter type is a member of the Ord type class. Values of the Map type can be created outside the Cal.Collections.Map module only by using constructor functions such as insert: insert :: Ord k => k -> a -> Map k a -> Map k a; public insert !key value !map = ... The owner of the Cal.Collections.Map module must ensure that all invariants of the Map type are satisfied, but if this is done, then it will automatically hold for clients using this function. Some examples of foreign abstract data types are Color, StringNoCase and RelativeDate: data foreign unsafe import jvm private "java.awt.Color" public Color; data foreign unsafe import jvm private "java.lang.String" public StringNoCase; data foreign unsafe import jvm private "int" public RelativeDate; The private implementation scope for Color means that a foreign function whose type involves Color can only be declared in the Cal.Graphics.Color module where the Color type is defined. A foreign function declaration involving the Color type relies on the compiler knowing that the Color type corresponds to java.awt.Color to resolve the corresponding Java entity i.e. it must know about the implementation of the Color type. Having a private implementation scope means that the Color type can be changed to correspond to a different Java class, or indeed to be an algebraic type, without the risk of breaking client code. In all these three cases there are useful, and different, design reasons to adopt a private implementation scope: For RelativeDate, the Java implementation type int represents a coded Gregorian date value in the date scheme used by Crystal Reports. Not all int values correspond to valid dates, and the algorithm to map an int to a year/month/day equivalent is fairly complicated, taking into account things like Gregorian calendar reform. Thus, it is desirable to hide the implementation of this type. For StringNoCase, the implementation is more straightforward as a java.lang.String. The reason to adopt a private implementation scope is to ensure that all functions involving StringNoCase preserve the semantics of StringNoCase as representing a case-insensitive string value. Otherwise it is very easy for clients to declare a function such as: foreign unsafe import jvm "method replace" replaceChar :: StringNoCase -> Char -> Char -> StringNoCase; which does not handle case-insensitivity correctly, but is a perfectly valid declaration. This declaration results in a compilation error when it is placed outside the module in which StringNoCase is defined because of the private implementation scope of StringNoCase. For Color, the issue is somewhat more subtle. The java.awt.Color implementation type is semantically the same as the CAL Color type. The problem is that java.awt.Color is mutable (since it can be sub-classed to create a mutable type). It is preferable for a first-class CAL type to not be mutable, so we simply make the implementation scope private to ensure that this will be the case. A somewhat less encapsulated kind of abstract data type can be created using friend modules and protected scope. For example, if an algebraic type is public, and all its data constructors are protected, then the data constructors can be accessed in the friend modules of the module in which the type is defined. Effectively this means that the implementation of the semantics of the type stretches over the module in which the type is defined, and all of its friend modules. These must all be checked if the implementation of the type is modified. Given the merits of abstract data types discussed above, it is perhaps surprising that most of the core types defined in the Prelude module are not abstract data types. For example: Boolean, Char, Int, Double, String, List, Maybe, Either, Ordering, JObject, JList, and all record and tuple types are non-abstract types. There are different reasons for this, depending on the particular type involved. For example, Boolean, List, Maybe, Either and Ordering are all rather canonical algebraic data types with a long history in functional languages, with many standard functions using them. They are thus guaranteed never to change. In addition, their values have no particular design invariants that need to be enforced via constructor functions. Exposing the data constructors gives clients some additional syntactic flexibility in using values of the type. For example, they can pattern match on the values using case expressions or let patterns. Essentially the same explanation holds for record and tuple types. Although non-tuple record types are less canonical, they do correspond to the fundamental notion of an anonymous named-field product type. The "anonymous" here simply means that the programmer can create an entirely new record type simply by creating a value; the type does not have to be declared anywhere prior to use. Char, Int, Double, String, JObject and JList are foreign types where in fact part of the semantics of the type is that we want clients to know that the type is a foreign type. For example, we want clients to know that Prelude.Int is essentially the Java primitive unboxed int type, and has all the semantics you would expect of the Java int type i.e. this is quite different from RelativeDate which is using int as its implementation type in a very tactical way that we may choose to change. One can think of a public foreign type declaration with public implementation scope as simply introducing the Java type into the CAL namespace. One interesting point here is with CAL's naming convention for public foreign types. We prefix a type name by "J" (for "Java") for foreign types with public implementation type such that the underlying Java type is mutable. This is intended as mnemonic that the type is not a pure functional type and thus some caution needs to be taken when using it. For example, Prelude.JObject has public Java implementation type java.lang.Object. In the case where the underlying Java type is not mutable, we do not use the prefix, since even though the type is foreign; it is basically a first class functional type and can be freely used without concern. For example, Prelude.String has public Java implementation type java.lang.String. In the case where the implementation type is private, then the fact that the type is a foreign type, whether mutable or not, is an implementation detail and we do not hint at that detail via the name. Thus Color.Color has as its private Java implementation type the mutable Java type java.awt.Color. When creating abstract data types it is important to not inadvertently supply public API functions that conflict with the desired public semantics of the type. For example, if the type is publicly a pure-functional (i.e. immutable) type such as Color, it is important not to expose functions that mutate the internal Java representation. A more subtle case of inadvertently exposing the implementation of a type can occur with derived instances. For example, deriving the Prelude.Outputable and Prelude.Inputable type classes on a foreign type, whose implementation type is a mutable Java reference type, allows the client to gain access to the underlying Java value and mutate it
(by calling Prelude.output, mutating, and then calling Prelude.input). The solution in this case is to not derive Inputable and Outputable instances, but rather to define a custom Inputable and Outputable instance that copies the underlying values.

Hi Pandra801,
When you create a the external content type, please try to add a filter based on your select statement.
http://arsalkhatri.wordpress.com/2012/01/07/external-list-with-bcs-search-filters-finders/
Or, try to create a stored procedure based on your select statement, then create ECT using the SQL stored procedure.
A step by step guide in designing BCS entities by using a SQL stored procedure
http://blogs.msdn.com/b/sharepointdev/archive/2011/02/10/173-a-step-by-step-guide-in-designing-bcs-entities-by-using-a-sql-stored-procedure.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

How to generate a set of date type records

How to generate a set of date-type records, with a fixed interval, starting from a date like 2008-01-01.

Some thing like this
SQL> select to_char(to_date('2008-01-01','yyyy-mm-dd') + (level - 1),'DD-MON-YYYY') my_date
2 from dual
3 connect by level <= 10
4 /
MY_DATE
01-JAN-2008
02-JAN-2008
03-JAN-2008
04-JAN-2008
05-JAN-2008
06-JAN-2008
07-JAN-2008
08-JAN-2008
09-JAN-2008
10-JAN-2008
10 rows selected.

How to use clob or blob data type in OWB

how to use clob or blob data type in OWB?
if OWB not surport these data type,how can i extract the large data type from data source

The same question was asked just two days ago No Data Found: ORA-22992
Nikolai Rochnik

How to replace content in text data type?

How to replace content in text data type?
when we sending the mails we are taking content from the database.
The data is maintained in text data type column. Now i have to replace some of content in mail content
(text data type column) from database.
I tried by using REPLACE function but data is truncated

The data is maintained in text data type column.
Hello,
See REPLACE (Transact-SQL) => "If
string_expression is not of type varchar(max) or
nvarchar(max), REPLACE
truncates the return value at 8,000 Bytes"
You may should consider to Change the data type from "Text" (deprecated) to NVarChar(max).
Otherwise you have to use
UPDATETEXT (Transact-SQL) for the text data type.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to set default value to date type attribute.

Hi,
How to set default value to date type attribute.
E.g I want to set u201C01/01/1999u201D to date attributes.
First i want to set value and then i want to fetch the same & want to check equals.
please suggest solution.
Regards,
Smita

Hi,
In wdinit() method u can set the date
DateFormat df = new SimpleDateFormat("MM/dd/yyyy");
Date today = Calendar.getInstance().getTime();
String reportDate = df.format(today);
wdContext.currentContextElement().setFromDate(reportDate);
Another way you have set the this formate like that
1. Create a Simple type under "Dictionaries->SimpleType" called DateFormat
2. Select the type as "date"
3. Go to the "Representation" tab and set the format as "dd/MM/yyyy" (or whatever u want, but month should be MM)
4.Bind the context attribute to the type created now.
Hope this helps u.
Best Regards
Vijay K

How to store and retrieve blob data type in/from oracle database using JSP

how to store and retrieve blob data type in/from oracle database using JSP and not using servlet
thanks

JSP? Why?
start here: [http://java.sun.com/developer/onlineTraining/JSPIntro/contents.html]

How to transfer IDOC information to BUT000?

Hi,
We are working on transferring Business Partner Master Data from SAP HR system to SAP CRM system through IDOCs.
The changes done in the standard SAP fields like (Partner No, Fist name, Last name etc) are transferred to BUT000 in SAP CRM successfully.
But the Z Fields created by the client are not getting updated.
When we checked the IDOC in SAP CRM in transaction bd87, it has the updated information of the Z Fields, but the system fails to transfer the same to BUT000.
To put it in short our query is How to transfer IDOC information to BUT000?
Anyone who has worked on this before, please provide your valuable inputs.
Thanks in anticipation
Rahul

If I understand ur requirement correctly then u need to move idoc_data-sdata to an internal table itab.In that case no need to move data from idoc_data-sdata to itab directly using OFF SETT.
1st declare one wrokarea of type E1EDL24.
data: w_E1EDL24 type E1EDL24.
Now move the content of idoc_data-sdata to the workarea.
move idoc_data-sdata to w_E1EDL24.
Now u can do field by field assignment to move data from w_E1EDL24 to ur table.
fs_itm_data-tapos = w_E1EDL24-tapos.
fs_itm_data-nista = w_E1EDL24-nista.
fs_itm_data-altme = w_E1EDL24-altme.
Here I am assuming that field names in the structure fs_itm_data are same as field names in the segment w_E1EDL24.
Regards,
Joy.

Unicode - "DMBTR" must be a character-type field (data type C,N,D or T)

Greetings Experts!
I am trying to convert legacy code to Unicode for a current ERP6.0 reinstallation and have encountered the syntax error "DMBTR" must be a character-type field (data type C,N,D or T)
The field is part of a structure and the fields attributes are as follows:
COMPONENT = DMBTR
COMPONENT TYPE = DMBTR
DATA TYPE = CURR
LENGTH = 13
DECIMALS = 2
DESCRIPTION = Amount in Local Currency
The code in question is as follows:-
macro Move_Zoned.
Converts a numeric variable to zoned format and moves it to a
target variable.
DEFINE move_zoned.
 &1 - source variable
 &2 - Number of Decimal Places
 &3 - 'To'
 &4 - Target Variable.
write &1 to w_zoned no-grouping decimals &2.
condense w_zoned.
 Remove the Decimal Points.
search w_zoned for '...'.
while sy-subrc = 0.
 move sy-fdpos to w_to_point.
 if w_to_point = 0.
 w_to_point = 1.
 endif.
 compute w_from_point = sy-fdpos + 1.
 concatenate w_zoned+0(w_to_point)
 w_zoned+w_from_point
 into w_zoned.
 search w_zoned for '...'.
endwhile.
shift w_zoned right deleting trailing space.
translate w_zoned using ' 0'.
call function 'Z_TRANSLATE_ZONED_DECIMALS'
 exporting
 i_input = w_zoned
 importing
 i_output = w_zoned
 exceptions
 x_invalid_zoned_char = c_invalid_zoned_char
 x_numeric_info_lost = c_numeric_info_lost
 others = c_other_zoned_error.
 Get the length of the recipient field so we don't truncate the
 numbers....
describe field &4 length w_flength in character mode.
describe field &4 type w_type.
describe field w_zoned length w_zoned_len in character mode.
if w_zoned_len <= w_flength.
 move w_zoned to &4.
 shift &4 right deleting trailing space.
 translate &4 using ' 0'.
else.
 Get the start position....
 If it's a packed field allow for values up to 6 figures
 compute w_zoned_len = w_zoned_len - w_flength.
 if w_type = 'P'.
 subtract 2 from w_zoned_len.
 clear w_type.
 endif.
 move w_zoned+w_zoned_len &3 &4.
endif.
END-OF-DEFINITION. "Move_zoned
LOOP AT t_single_kunnr.
 move_zoned t_single_kunnr-postamt 2
 to t_single_kunnr-dmbtr.
 DIVIDE t_single_kunnr-dmbtr BY 100.
 MODIFY t_single_kunnr.
ENDLOOP.
Is there a solution to get past this syntax error as I would rather not change the datatype of the field in the structure.
Much Obliged
Elphick.

Type X is not allowed in Unicode. When a field is declared as Type X with Value u201809u2019 or any other value, it can be resolved by using classes.
Before Unicode
 CONSTANTS: c_hex TYPE x VALUE '09'.
Resolution:
Itu2019s work for any value of x.
First a temporary field of Type c should declare. Following class will convert Type x variable into type c.
Example:
CONSTANTS: c_hex TYPE x VALUE '09'.
DATA: LV_TEMP TYPE STRING.
DATA: LV_TMP TYPE C.
TRY.
CALL METHOD CL_ABAP_CONV_IN_CE=>UCCP
EXPORTING
UCCP = c_hex
RECEIVING
CHAR = LV_TMP .
CATCH CX_SY_CONVERSION_CODEPAGE.
CATCH CX_PARAMETER_INVALID_TYPE.
CATCH CX_SY_CODEPAGE_CONVERTER_INIT.
ENDTRY.
CONCATENATE I_OUTPUT-BKTXT I_OUTPUT-BVORG
I_OUTPUT-BUDAT I_OUTPUT-MESSAGE INTO
SEPARATED BY LV_TMP.
I_BUFFER = LV_TEMP.
CLEAR LV_TEMP.
CLEAR LV_TMP.
OR
Note: It works only for type x value 09.
CLASS cl_abap_char_utilities DEFINITION LOAD.
CONSTANTS: c_hex TYPE c VALUE
 abap_char_utilities=>HORIZONTAL_TAB.

How to transfer a set of data from Excel spread sheet to an Access database

hi,
Can any one please tell me how to transfer a set of data from Excel spread sheet to an Access database using SQL query.I'm using java API currently. I have done all sorts of ODBC connection in administrative tools.The file is in correct location. I have done certain coding but with errors.Help me to get rid of these errors,
Coding:*
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection datacon=DriverManager.getConnection("jdbc:odbc:exdata","",""); *//For Excel driver*
Connection datacon1=DriverManager.getConnection("jdbc:odbc:stock1","",""); *// For mdb driver*
Statement datast=datacon.createStatement();
Statement datast1=datacon1.createStatement();
ResultSet excelrs=datast.executeQuery("select item_code,sdata,closing_stock from phy "); *//phy is the excel file*
while(excelrs.next())
String ic=excelrs.getString("item_code");
System.out.println(ic);
String d=excelrs.getString("sdate");
double cs=excelrs.getDouble("closing_stock");
int dbrs=datast1.executeUpdate("insert into second values('"+ic+"','"+d+"',"+cs+")"); *//second is the mdb*
excelrs.close();
}catch(Exception e)
System.out.println(e);
Error:*
java.sql.SQLException: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'C:\JavaGreen\phy.xls'. Make sure the object exists and that you spell its name and the path name correctly.
thanks,
kumar.

JAVA_GREEN wrote:
No i haven't mixed up.But the file from where i have to retrieve the data is in csv format.Even though i created another csv driver.and tried but i cud not find a solution to load/transfer a set of records from one file(in Excel/csv format) to another file(in mdb format).plz help me.Is there any other methods for this data transfer.A csv file is NOT an excel file.
The fact that Excel can import a csv file doesn't make it an excel file.
If you have a csv file then you must use a csv driver or just use other code (not jdbc) to access it. There is, normally, a ODBC (nothing to do with java) text driver that can do that.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to my laptop.

I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.

You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.

Cardinality between Message Type and Data Type

Hi SAP gurus,
Could anyone please tell me the cardinality between the Message Type and Data Type?
Thanks,
Adnan Abbasi

1:1
Sameer

How to define IDOC as 'type' in 'Data types' ?

Hi all,
I am trying to define a data type which accepts multiple occurences of IDOC type in the same message. The required XML should be like this...
<All_IDOCs>
 <ZUPFIN_> <--- this is the IDOC imported into XI
 <IDOC>...
 </IDOC>
 </ZUPFIN>
 <ZUPFIN_> <--- this is the IDOC imported into XI
 <IDOC>...
 </IDOC>
 </ZUPFIN>
<All_IDOCs>
Now, there are more than 800 fields under <ZUPFIN_> IDOC. So I am trying to find out an easy solution to create the above data type without manuall adding each element.
Any idea ?
Thanks.
- Atul

Hi Ahmad,
As I have already mentioned above, I do not want multiple occurences of 'IDOC' element. Instead I want the multiple occurences of 'ZUPFIN_' (in Michael's blog you given by link, it is 'MBGMCR02'). So the example does not help here as roots cannot occur more than once.
I cannot have anything changed on R/3 side.
Thanks.
- Atul

How to transfer stock from one storage type another storage type

Hi Guys
I have 10 items
How can I transfer all in One Single Transfer order from one storage type to another storage type
I need to take TO print for all these 10 TO items

Hi,
Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
Regards,
Dilli Babu R

How to Transfer IDoc Type to Data Type in XI

Similar Messages

Maybe you are looking for