How to transfer ipad2 contents without internet?

Is there any way to transfer contents of my ipad2 without using the internet? I had hastily pressed the command erase all contents when I lost my iPad in the air
Out. For some fortunate intervention I was able to retrieve my iPad. Is there anyway to save contents before it gets erased?

If the computer you normaly backup in itunes with is not connected to the internet (cable unplugged)
You may be able to attach it and back up before it tries to connect to internet, but it may reach your wireless router first.
Hard to say for sure.

Similar Messages

  • How to transfer the contents of my smartphone to my new iphone, icloud accepts content from other smartphones?

    Hi community
    how to transfer the contents of my smartphone to my new iphone, icloud accepts content from other smartphones?
    ty for help
    Olib

    If you haven't set up your new iMac yet use Setup Assistant when you do. If you have, use Migration Assistant http://support.apple.com/kb/HT4889

  • How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ?

    Hi there,
    I have an old video camera that is still working. That video camera uses a Hi 8 tape. The tape is bigger that the current DV tape. The size of the tape is something like a tape cassette.
    How to transfer the content of the video to Adobe Premiere Pro CS3 for editing ? Being an old video camera, the output doesn't have any firewire or USB connector. In fact the only output is has is the Yellow, Red & while connector (is this referred to as composite).
    So, how do I input this Yellow, Red & White cable into the PC (or rather into Adobe Pro CS3) ?
    Any established hardware/convertor to recommend ?
    Thanks

    Ryan,
    For "composite out," only you will need an A-D "bridge" to Capture from that camera. Grass Valley/Canopus offers two really good ones, the ADVC-110 and the ADVC-300. There are others and also PCI A-D capture cards, but the Canopus units get very good reviews.
    One other workflow would be to hook your older camera to a digital video camera with passthrough (not all have this and it is being discontinued fairly rapidly in consumer cameras) and then doing the Capture through that digital video camera via FireWire. You will not have Device Control, but can easily start/stop via the mouse and one hand on the switches, or on a remote.
    Good luck,
    Hunt

  • How to install Adobe Reader without internet!

    How am I able to install Adobe (PDF) Reader on a PC without Internet.
    Downloading the installer and moving the file on the other pc didn't work sadly.
    Is there a full installation zip file? If so i definitly missed it !
    I hope for a response soon because I have an important deadline to catch!
    Thank you for your time!

    Use the offline installer from http://get.adobe.com/reader/enterprise/
    [topic moved to Adobe Reader forum]

  • How to transfer tabl content using ALE

    Hi All
    I need to to transfer the content of a HR table (T526) using an ALE scenario. However I have not found a way to do this. I stumpled over CONDA2 but not quite sure if this suits the bill. Anybody out there who can help.
    I am not an HR wiz so bear with me if this is dead obvious.
    Hope somebody can help
    Cheers

    Hello Bowie,
    Could you please help in how to use CONDA2 message type in ditributing HR Configuration data like data from following tables..
    T001P     Personnel Area/Subarea
    T500P     Personnel Areas
    T503     Employee Group/Subgroup
    T511     Wage Types
    T512T     Wage Type Texts
    T512Z     Permissibility of Wage Types per Infotype
    T528B     Positions
    T554S     Attendance and Absence Types
    T554T     Attendance and Absence Texts
    Thaks,
    Venkat

  • How to transfer iphone content to new Macbook

    I've just replaced my PC laptop with a Macbook and I'd like to know how to transfer my iphone content to the Macbook. I've read various help pages and posts and I'm totally confused about the conflicting information.
    I understand that the iphone is designed to be used with only one computer, but getting it to the new computer is the challenge. I have thousands of songs, hundreds of photos, 150+ contacts and 13 apps (some of which I rely on heavily). As well as notes which I was never able to synchronise previously, so they only exist on the iphone.
    Most of the songs were loaded from my CD collection and it took weeks to rate and categorise them, which I would prefer to avoid doing again. I suppose I could export as data CDs but it's still a lot of disks and time. Most of the photos were taken by camera (not iphone) which again I could transfer via data CD.
    If I've understood things correctly, the authorise/deauthorise option in iTunes refers to items purchased via itunes only? And the iphone backup only backs up settings, rather than content? Would an external hard drive help (I don't yet have one)?? I'd appreciate your thoughts for a simple-ish, not to time consuming solution.
    Thanks in advance,
    Alison

    By design, the iphone will sync itunes content with one computer at a time. Any attempt to sync such content with a second computer will result in ALL itunes content being first erased from your phone & then replaced with the content from the second computer. This is a design feature and cannot be overridden. Because you replaced your computer, your phone, sees your computer as a "new" computer. The itunes content sync is one way: computer to phone. If you have photos that were synced to your phone or music ripped on your own that were not backed up, you will first have to extract them from your phone using third party software, before you do anything else:
    http://www.wideanglesoftware.com/touchcopy/index.php
    Once you've done that, do the following in the order specified:
    1. Disable auto sync when an iPod/iPhone is connected under Preferences>Devices in itunes(under the edit menu if using Windows).
    2. Make sure you have one contact & one event in the supported applications(Address Book & iCal) on your computer. These entries can be fake, doesn't matter, the important point is that these programs not be empty.
    3. Connect your phone, iTunes running, do not sync at this point.
    4. Store>Authorize this computer.
    5. File>Transfer Purchases(To make sure all purchased content on your phone will be in your itunes library).
    6. Right click in the device pane & select reset warnings.
    7. Right click again and select backup.
    8. Right click again & select restore from backup, select the backup you just made. When prompted to create another backup, decline.
    9. This MUST be followed by a sync to restore your itunes content, which you select from the various tabs, You'll get a popup regarding your contacts & calendars asking to merge or replace, select merge.
    You should be good to go.

  • How to copy cell content without formula

    In numbers, how do I copy and paste the cell content without transferring the underlying formula?

    Use the menu item "Edit > Paste Values" when pasting instead of <COMMAND>+v (paste)
    Message was edited by: Wayne Contello

  • How to hook up printer without internet

    I am woundering how I can connect wirelessly to my HP ENVY 4500 printer with my HP laptop(windows 8.1) without internet? the printer did not come with a USB cord to connect directly. 

    You don't need the internet to connect any printer.  I would just go out and buy a Printer USB cable.  Make sure it is a Printer USB cable and not a standard USB.  Of if you have a router you can connect it, or if the printer supports Wireless Direct you can connect without a cable.  Read your manual for your options.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How i receive FM transmission without internet in phone4

    How i Received/listen local FM  transmission without internet connection, just like other phone.
    there are many apps which stream through internet but i want any type of solution in which i can listen local FM transmission without streaming/internet..
    Thanks to bear with me.

    The iPhone has no FM radio capability.

  • How to install Framemaker 12 without internet connexion ?

    Good morning all,
    I need to install for testing Framemaker 12. In my enterprise, our workstations are not connected to internet. Is someone can tell me if there is a solution to install this software without internet connexion ?
    Thank you
    Stéphane

    Call Adobe Support on the phone and they'll walk you through it.
    Install calls are free.
    Art Campbell
              [email protected]
      "... In my opinion, there's nothing in this world beats a '52 Vincent and
    a redheaded girl." -- Richard Thompson
                                                          No disclaimers apply.
                                                                   DoD 358
    I support www.TheGrotonLine.com, hyperlocal news for Groton MA.

  • How can i use Siri without Internet connectivity?

    Siri doesn't work without Internet.
    I was in a situation yesterday, when i was driving and have to call my Dad.
    Due to the bad weather, data services were down and when i used Siri to call my Dad's number, its just said "Siri not available, please connect to Internet"
    I can understand, that for Weather details, Web search etc, Internet is required, but at least Siri should handle in-phone features like "calling, Texting etc", without Internet connectivity.

    Even though it seems like Siri should be able to handle things such as dialing a number or dictating a text, an internet connection is required for Siri to function. There is currently not a way to get Siri to do otherwise.

  • How to erase iPhone 5 without internet connection

    Hello I have already deactivated my 5s because i upgraded to the 6plus.  I now want to give away my 5s but need to erase it.  It is no longer in service.  How can I erase without an internet connection?
    Thank you...

    First turn off Find My iPhone, iMessage and FaceTime.
    Then Settings > General > Reset > Erase All Content and Settings

  • How to transfer the content in a StringBuffer into a InputStream

    I need append the comment to the buttom of each file. I read the file into the stringbuffer first, appending the comments. After completed, how can I send the content in the StringBuffer back into a InputString in order to continue with some other file manipulation?
    I saw a method StringBuffer.toString(), but nothing to transfer back to InputString
    Thank you in advance

    How aboutnew StringReader(sb.toString());Since you are working with text data, you should be working with Readers instead of InputStreams.
    (And if you are appending data to a file, wouldn't it be more effective to just use the version of FileWriter that allows you to append the data, instead of reading the whole file and writing the updated file back?)

  • How to transfer Outlook content on PC to iPhone?

    I figured out how to sync iTunes on my desktop computer with my phone, but that doesn't do me any good because there isn't any content in iTunes.  So how do I get my Outlook data into iTunes?  Contacts are the most important thing, but I'm also interested in transferring my calendar and tasks.
    By the way, I have no itention of transferring my Outlook content using iCloud, at least for now.  I assume (hope) it can be done without iCloud.

    Thanks, ios decipher.  This isn't quite working yet.  Hope you or someone else can help me.
    I have completed these steps:
    "- connect iphone to pc
    - open itunes(if it does not open automatically)
    - navigate to your iPhones summary page
    - select the info tab(to the right of summary)"
    It's not possible to complete the next step ("- select sync contacts and sync calendars") because there is nothing to "select" under Sync Contacts or Sync Calendars.  Under Sync Contacts, there is this text: "Your contacts are being synced with your iPhone over the air.  Over-the-air sync settings can be changed on your iPhone."  The same message is under Sync Calendars.
    I don't know if changing my over-the-air sync settings is the thing to do here, but at any rate it isn't possible for me to do that either: I combed through all the settings options on my phone, and didn't see anything like this.
    Nor are there any sync seetings in iTunes that improve this situation.
    Any ideas?   

  • HT4527 How to transfer iPhone content (playlists, notes, calendar, contacts) to a MBP's iTunes library after a crash where I had to reinstall everything?

    I have a MBP and the hard drive crashed. I had to reinstall everything from zero. I didn't have a back-up of everything. Now my iTunes library does not recognize my iPhone and ask me to erase it to sync it. How can I transfer content from my iPhone to my MPB and rebuild iTunes library from my iPhone?

    I have discovered the solution and it involves an issue I suspected. After the restore of my old Time Machine Lion files to my new MBP running ML, the restore restored my computer back to Lion. After an install of ML, my computer worked perfectly except the fancy Scroll and zoom featured we all love from the trackpad. Ha already installed ML on other partitions and the trackpad worked perfectly on them.  Even the guest login's trackpad worked perfectly but not the main admin account.
    First thought was to create a new admin account and copy everything from the old admin to the new admin and then delete the old admin account. Hated the idea because all files had to be copied rather than moved.
    So what was left to do. I had thought of deleting all the apple preferences from the library and replace them with the contents of the library on another partition in ML. First I deleted old preferences many of which were old Lion preferences. That didn't solve the issue.
    I forgot that Lion and ML HIDE the user library so I was working on the wrong library. Discovered the Terminal command "chflags nohidden ~/Library" and I chose to reveal the user library on a ML partition.
    Solution:
    I booted into another ML partition. I guess that I could have booted into the new admin user account and changed the permissions  to access the old admin users Library But I chose to boot
    from another ML partition: copy ALL the com.apple. XXXXX.plist files and the folder  BY Host. It has special hidden files. Other  way is to copy the Preferences folder we'll say into the Desktop.
    I then proceeded to delete ALL the com.apple…….plist files and the Host folder into the trash. Then I copied all the apple.com…plist files and the Host folder and then rebooted. And now my wonderful Trackpad works as mountain Lion intended it to work.
    I'm leaving this solution because there's someone else in the MacWorld with the same issue.
    Ted

Maybe you are looking for