How to transfer Line Items
Hi
How to transfer Line Items from One GL account to another GL account.
We, at the time of changing Non Open Item Manged account to Open Item Manged account, how can we transfer Line items to make this GL account Zero, If suppose line items are more than 200.
Satish
Points assured.
If you are attempting to change the account from Non Open Item managed, you need to make the account balance zero. The change will be be effective only for future transactions. You need not transfer all line items, find the balance and make an entry to debit or credit to make it zero, to a temporary account. Later, once you have activated, you can reverse that transaction.
The OSS 606977 refered may be helpful if you are looking for reverse activation. i.e from Open to Non Open. Here is a brief:
Symptom
In the G/L account master record, you can activate/deactivate the 'Open item management' indicator if the balance of the account is zero. In this case, the system does not check whether postings exist on the account.
If postings exist, this could lead to problems, for example, if the clearing is reversed after the change to the indicator is made.
Other terms
FS00, FS02, FSS0, FS02, FH190, XOPVW
Reason and Prerequisites
The transactions for the maintenance of the G/L account master record did not check whether postings exist on the account. Now the program checks whether postings exist in the current year or previous two fiscal years.
Solution
Implement the attached correction or import the corresponding Support Package. Since it could make sense to change an account with balance zero from open item managed to non-open item managed (and vice versa) - despite postings to the account - the message is delivered as customizable (with error as a default setting).
The check is also carried out, when open-item management is activated, is postings exist on the account.
If you implement the note you must also carry out the following:
Use Transaction SE91 to create message 190 in message class FH with the following text:
Account balance = 0; however, postings exist on the account
Use Transaction SM30 to insert the following entry into view T100S:
Application area FH
MsgNo 190
Allowed EW
Standard E
Afterwards, the message can be customized in View V_T100C. To do this, you can use Transaction OBA5.
Similar Messages
-
Urjent-how to add line items in tcode-FBL3N
Hi Experts,
How to add line items customer, customer name, vendor and vendor name in FBL3N.
Thanks in advance.
mahe
Moderator message - Please do not use words like "urjent". Please ask a specific question. Please search the forum. This question has been asked and answered before. Post locked
Edited by: Rob Burbank on Apr 29, 2009 11:27 AM
Edited by: Rob Burbank on Apr 29, 2009 11:28 AMHi,
Check the BTE's:
00001020 POST DOCUMENT: Prior to final checks SAMPLE_INTERFACE_00001020
00001025 POST DOCUMENT: Final checks completed SAMPLE_INTERFACE_00001025
00001030 POST DOCUMENT: Posting of standard data SAMPLE_INTERFACE_00001030
00001050 POST DOCUMENT: Accounting interface SAMPLE_INTERFACE_00001050
Thanks & Regards,
Harish -
How to transfer purchased item from itunes to an ipod
how to transfer purchased item from itunes to an ipod? Spent about an hour and cannot figure out how to do that The best result this far was smth. like this to Sync a book means that all your music, songs, TV show and movies will be erased. What a strange Apple logic!
That message indicate that you are trying to sync with other than the one syncing computer/iTunes library that yo can have. You have to two choices:
- Make this computer your syncing computer by:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
- The manual method of syncng specified here:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
The manaul method on works for music and videos on other than your one syncing computer. -
How to get line item net price and net value?
I have using "BAPI_SALESORDER_SIMULATE" to SIMULATE to create SO,
the return table
ORDER_ITEMS_OUT-NET_VALUE is not equals than created by VA01 .
how to get line item net price and net value?Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty -
How to default Line item display in GL master record???
Hi..Guys
How to default Line item display selection in GL master creation.....When we create GL master it will automatically get selected.
Is it possible to do.
Plz reply .Hi
With sample account you can succeed your requirement
Give all the defualt fields whtatever you want then use this sample account while creating GL account
One more possibility is with SHD0 screen layout change with defaults (this thing i am not sure)
Reg
Vishnu -
HT1660 how to transfer purchased items to iTunes library?
how to transfer purchased items to itunds library?
iTunes library on what type of computer? Windows? Mac? Procedures are different....
GB -
Hi,
This is in 11.5.10.2.
For Balance Sheet review/clean up of GL Accounts, we are facing following Problems.
When we query a particular GL account the number of lines fetches are more than 6 lakhs line items due to which we are not able to extract complete dump .
The data Extracted is not getting classified into open and cleared items (Clearing) at GL level and therefore the data line items are enormous. Can you suggest something in this regard as to how to proceed further? IF you can share the methodology being adopted by any of you, it will be a great help.
ThanksHello.
Can you please try the following query? I'm not sure were are you keeping the data that indicates that the lines are not adjusted so i included the JGZZ_RECON_STATUS field but you can adjust the query to your needs.
SELECT l.effective_date,
h.je_source,
h.je_category,
l.description,
nvl(sum(l.accounted_dr),0),
nvl(sum(l.accounted_cr),0),
l.jgzz_recon_status
FROM gl_je_lines l,
gl_je_headers h
WHERE l.je_header_id = h.je_header_id
AND l.set_of_books_id = <your set_of_books_id>
AND l.effective_date >= '1-jul-09'
AND l.effective_date <= '2-jul-09'
GROUP BY l.effective_date,
h.je_source,
h.je_category,
l.description,
l.jgzz_recon_status
Hope this helps, otherwise repost.
Octavio -
Order creation logic how to pass line items
experts
i have the following data in iternal table itab.
po number ,customer number, matnr,quantity ,order date.
1212838383 7494749 8383938833 20 20032009
1212838383 7494749 8383938832 10 20032009
1212838382 7494749 8383938833 20 20032009
1212838384 7494745 8383938823 30 22032009
1212838384 7494745 8584858588 05 22032009
now i want to populate this data into idocs orders segement .
for all po the customer will be the same and i need to create one order for that.
in the above data first 2 lines have same po so i need to create order with 2 line items.
sales org,division,distribution channnel,ordertype will be same for all the records.
loop at itab into workarea.
at new po. "for same po, same header data so i am using AT NEW
edi_dd40-segnum = 1.
edi_dd40-segnam = 'E2EDK14 '.
edi_dd40-mandt = sy-mandt.
edi_dd40-psgnum = psgnum.
e2edk14-qualf = '008' .
e2edk14-orgid = 'NN21.
MOVE e2edk14 TO edi_dd40-sdata.
append edi_dd40 to itab_output.
edi_dd40-segnum = 1.
edi_dd40-segnam = 'E2EDK14 '.
edi_dd40-mandt = sy-mandt.
edi_dd40-psgnum = psgnum.
e2edk14-qualf = '006' .
e2edk14-orgid = 'ni.
MOVE e2edk14 TO edi_dd40-sdata.
append edi_dd40 to itab_output.
endat.
now the item data comes , so i need to create items with same po.and afetr this i need to submit this data to fm before another diffent po comes.below same customer and po so need to consider as one sales order and submit to fm.
item1 1212838383 7494749 8383938833 20 20032009
item2 1212838383 7494749 8383938833 20 20032009
call function 'MAST_IDOC_DISTRIBUTE'
My concern is how to tell to the system for the same po create the order with multipl line items , do i need to use to AT NEW
or some other commands above?
endloop.i have used at end of po. but my matnr is becoming *************. no date is showing in the internal table while populating the matnr to segments.
Loop at itab into workarea.
at end of po.
here i am filling the matnr to the segment. here workarea-matnr is showing *********** only stars,
endat.
endloop.
If i remove the at end of po , then the matnr is comming .
Please sugggest me what to do.
my fields sequence are like this.
kunnr " customer
bstnk "po
matnr " material
currency
kwmeng "order quantity
podate
orderdate
so how to handle this please suggest. -
How to reject Line Items in a Service Contract?
Hello friends,
Can anyone help me understand how do we reject items in a Service Contract? I don't see any Reject field. Is it one of the Status I need to configure for Item Level Status Profile? Even if I add a 'Reject' status, how do I link it to Rejection Reason codes? (I know how to add Reason codes in customizing, but how they are linked to a Transaction type is something I am not finding...).
Please provide any inputs.
Thanks.HI Navaneethan,
please try following code.
make PEKKO should be internal table with appropraite structure..
Loop at ZBTXT.
MOVE ZBTXT-LINE TO PEKKO-ZBTXT.
append PEKKO.
clear PEKKO.
ENDLOOP.
loop at pekko.
write : / PEKKO-zbtxt.
endloop.
if above code is helpful, REWARD POINTS.
Regards,
Ranjith -
How to clear line items in accounts not managed on an open item basis
We are getting ready to archive FI accounting documents from years 1993-2002. We encountered a great deal of documents that did not archive during testing because the documents have open items. We were given bad advice in the beginning on how to set up accounts. Several accounts were not set up on an open item basis and these accounts will not get archived until the line items are cleared. We have set up new accounts to replace these accounts that are now being managed on an open item basis. Our FI users are unable to clear the documents using F-03. Does anyone have a way of clearing these type of documents (not managed on an open item basis)? Thank you in advance.
One of our users has proven that the line items on GL accounts not managed on an open item basis are not holding up the archiving. The reason for many documents not archiving is that the item posted to the vendor is still open.
thanks! -
How to select line items in recording(BDC)
Hi All,
we are trying to Recording QP02 transaction ,we have inputs like material,plant,Group,Group Counter.
after entering these inputs we will get multiful line items(inspection characteristics).we need to check one field for each item.
How can we get this?
Please help me?
Thanks,
Peddi reddy.Hi Kamesh,
Thanks.
After selecting line items i am selecting control indicators Tab.
then Pop up screen called as (Edit characteristic control indicators) will open ,..then just pressing enter..the it will show another pop up ..here i am selecting one field(Long term Inspection)..the process has to do for all line items.
In My program i have copied BDC performs which i got from Recording.
Do i need to change tha performs or will it work?
i tested in foreground with another material .... upto 3 or 4 line items its working fine.after that sytem does.t say anything.
if i need to chage performs please help me . -
How to give line items in flatfile while doing BDC for Table control
Hi all,
I am writing BDC for Multiple line items and Transaction is : FSE5N.
How do i give the data in the flat file. I mean how do we give the multiple line items in flat file , i.e for second line item again we have to header data or not ?
ex:
1015;ALL;demo;kr;INR;01;0001;3000172;100
1015;ALL;demo;kr;INR;01;0001;3000172;200
for first lineitem : 3000172;100
for 2nd line item : 3000172; 200.
header data : 1015;ALL;demo;kr;INR;01;0001.
Thanks in advance
krupaliHii ,
u can give in the same format as u have done in the example.
A B C D E F G H I
1015;ALL;demo;kr;INR;01;0001;3000172;100
1015;ALL;demo;kr;INR;01;0001;3000172;200
and while writing the loop u can give
loop at it_head.
loop at it_head where a = it_head-A and b = it_head-B ..........upto G = it_head-G.
endloop.
endloop.
check this
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
Neeraj -
How to Update line items in a structure ?
Hi i am getting 3 line items retrieved from a Function Module. But while displaying in the script it shows only the last line item. How do i update all the line items??
The code is given below,
CALL FUNCTION 'FI_PRINT_ZTERM'
EXPORTING
I_ZTERM = EKKO-ZTERM
I_LANGU = EKKO-SPRAS
I_XT052U = ' '
I_T052 = T052
TABLES
T_ZTEXT = ZBTXT
EXCEPTIONS
ZTERM_NOT_FOUND = 01.
Loop at ZBTXT.
READ TABLE ZBTXT.
IF SY-SUBRC EQ 0.
PEKKO-ZBTXT = ZBTXT-LINE.
DELETE ZBTXT INDEX 1.
* UPDATE PEKKO-ZBTXT.
MOVE ZBTXT-LINE TO PEKKO-ZBTXT.
ENDIF.
ENDLOOP.
And also how do i retrieve it in the script ?HI Navaneethan,
please try following code.
make PEKKO should be internal table with appropraite structure..
Loop at ZBTXT.
MOVE ZBTXT-LINE TO PEKKO-ZBTXT.
append PEKKO.
clear PEKKO.
ENDLOOP.
loop at pekko.
write : / PEKKO-zbtxt.
endloop.
if above code is helpful, REWARD POINTS.
Regards,
Ranjith -
How to show line items repeating n times alternatively or assa sets
Dear All
Situation: Here is my problem. I have have editable ALV which saves the
data on pressing save. The no. of qty against an invoce gets repeated on
the basis of input from the selection screen.
Problem Area: For example if user entered invoce number and 2 at one field
in selection screen so if there were 2 line items against the invoce both of
them should be repated 2 and 2 times. Right now if there are 2 line items
and user entered 4 so first line item will be shown 1 times and second will
be repeated 3 times.
Question how can I have both the line items to appear 4 and 4 times
instead of the current situation described above.
I would appreciate help all the senior members of the ABAP group.
Regards,
Anurag JainDear All
Situation: Here is my problem. I have have editable ALV which saves the
data on pressing save. The no. of qty against an invoce gets repeated on
the basis of input from the selection screen.
Problem Area: For example if user entered invoce number and 2 at one field
in selection screen so if there were 2 line items against the invoce both of
them should be repated 2 and 2 times. Right now if there are 2 line items
and user entered 4 so first line item will be shown 1 times and second will
be repeated 3 times.
Question how can I have both the line items to appear 4 and 4 times
instead of the current situation described above.
I would appreciate help all the senior members of the ABAP group.
Regards,
Anurag Jain -
How to findout line items of zero balance clearing account?
Hi Friends,
my zero balance clearing account shows balance.
we have 6 business areas and document splitting activated.
Trial balance is matching at co.code level.but its mis matching at business area level.
Line item management is checked in the master data of zero balance clearing account.
How to find out the line items of the zero bal.clearing account so that i ll get the relevant business area amount and ll pass journal entry accordingly and ll get the balanced trial balance at business area level.
What is the table for zero balance clearing account line items?
suggest.
Regards,
SumeayDear
I am also facing the same problem. We are having 7 business areas. Trial balance is tallied even at busness area level. However, the zero balance clearing account is showing balance in each business area ( we can say "inter business area balncess.").
Please help
Regards.
Maybe you are looking for
-
How to Format and Label a bootable 20G file-as-a-filesystem?
I'm trying to create a bootable 20G file that has a UFS filesystem. I'm starting with a bootable Compact Flash (CF) that's 32G, has a UFS file system, and I'd like to "remaster" the 32G CF into a 20G file, then create bootable CF's with "dd" from the
-
How can I re-install Adobe Acrobat XI Standard on the same machine
My machine had crashed and so I can't deactivate Adobe Acrobat XI Standard. How can I re-install on the machine? There are no ways to contact customer support to reset the count as suggested in one of the forum post. What are my options? Thanks.
-
Mp3s not playing in Firefox, but will in Safari
This likely is not a GoLive issue, still I'm stumped, and an afternoon of searching online hasn't solved my problem. I'm hoping some wise people here can steer me in the right direction. I have a couple of sites (designed with GoLive) that are no lon
-
i synched iPhone and Pc but can't locate any of library on IPhone - am I missing something obvious ?
-
BC/Muse syncing issue with third-party code
Hi there, I was hoping someone had a solution to this issue - which is this: I have used some third party code for a Hotel's 'QuickBook' function on every page. Periodically, this code stops working on some pages, and works on others - mainly when I