How to transfer local workbench request to production server

Hi,
All my workbench requests are saved under local change request node instead of being in the production system node. How to release and transport these requests to the production server.
Kindly help.
Regards,
Sriram

Hi Sriram,
In SE01 check whether u have given value for target system or not.
Target system is ur production system .Check whether u have specified it in SE01 for ur transport request.
If u have not specified target system for ur Transport request it will be shown in Local Workbench request
Regards,
lakshman.
Edited by: Lakshman N on Aug 4, 2009 9:31 AM

Similar Messages

List all Local Workbench Requests

Hi all,
In SE09 there are more than 20 thousand requests. In these there are lot of local workbench requests available. Some local workbench requests have different packages.
My requirement is to list out all the local workbench requests from different packages. How it is possible?
Regards,
Ranjith C.

Hi ranjith,
Go to table TADIR. You give the package name or development class name in the field DEVCLASS. You will get all the requests for this package in the field KORRNUM.
Hope this will help you.
Regards,
Sanath.

How to transfer the http request from applet to servlet/jsp

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

New Requests created are in 'Local Workbench Request' in R3 Development

Hello ,
I am going to transport data sources from R3 Dev to R3 Quality.
I have successfully transported the package (which is created in SE80 ) and Application componenet hierarchy and all active version data source RSA6 to R3 Quality .
I have also checked that the package , application transport hierarchy and data sources in R3 Quality.
Now when I tried to create new requests for LBWE data sources ( maintain extract structure , generate data source) , I am getting a message Create Customizing Request , So I created Customizing Request and then I am getting message to create Local Workbench request. If I create local workbench request then it can not be imported to R3 Quality.
Client R3 is open SCC4 settings are 'Automatic Recording of Changes ' and 'Changes to repository and cross client customizing are allowed'.
I am not getting why the system is not asking me to created 'Workbench Request'.
Thanks and Regards ,
Amol Kulkarni

Hello Viren ,
Local Transport Request are not transportable even if we release them.
I have resolved the issue in the below way ,
I went to SE21 and entered the package name as 'YBW' and then clicked on change .
Then Click on properties tab and then select Transport layer as SAP and save.
Go to SE80 and select package and in dictonary Objects drill down view ...right click on any selected view name ...go to other function and click on Write Transport Entry...mention request from Own Request tab which was earlier as Local Workbench Request.
Then go to SE10 and double click on request and go to properties tab ...there select Target Group as
R3 Quality Server name and save it.
Transport the package to R3 Quality.
Henceforth whichever request u create will be of type 'Workbench Request'.
go to SE10 and cross check that your request is now Workbench Request,
Regards ,
Amol K.

Question to local workbench request

Hi,
I have question to local workbench request. If this kind of request is released, is it stored also in the local transport folder (/usr/sap/trans...) in the file system? Or where I can find it?
Thanks for your answers.

Hello Andreas,
A local workbench TR or for that matter any local Transport Request is one which has no target group/target system assigned to it and hence even after releasing it the changes stored in it don't get moved to other systems.
A local TR when released does not get stored in /usr/sap/trans folder as data and co-files for local TRs don't get created.
A released local TR can be viewed in SE01 transaction in SAP.
Please let us know what is your exact requirement with local workbench TR? May be we will be able to help you out with that.
PS award points if you found this answer useful.
Regards.
Ruchit.

Transport for local workbench request

Hi guys,
i have a package which I modified and want to save to a transport, but a dialog is prompted for local workbench request. Actually I am wondering why this package is local object. Because in local object I didn't see this object.
Can somebody give me some hint?
Thanks in advance
Regards,
Liying

A local object is something which non-transportable. You should change the Object directory entry of the objects to a transportable package so that the system will automatically prompt you for tr. request number.
regards,
Ravi
Note - Please mark all the helpful answers

How to get the Change node in Production Server!!!!!

Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.

Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S

Return code 8 when we import transport request in production server

Hi,
I imported one transport request in Production server. I got the error "Ended with return code 8". I checked the log. It shows " R3TRMSAGZDVLP_MSGCL was repaired in this system" and "LIMUMESSZDVLP_MSGCL051 was not imported in this step"
How to i rectify?
Regards
Somu

Hi,
The particular object has been changed by some one in your production server.Here you can check whether there is any particular transport request in which the object R3TRMSAGZDVLP_MSGCL is included.if so release that request and perform the import again.If you are sure that you want to import is ignoring the repair then use unconditional mode for the same at the time of import.now the import will be successful without issues.
Regards
Ashok

How to transfer internal table data to Applicatiion Server in XML fromat.

how to transfer internal table data to Applicatiion Server in XML fromat.

Hi if u want to transfer from to application server using xml in
do like this,
v_xml_table is u r internal table,
and define li_xml_table as line of u r internal table
OPEN DATASET g_file FOR OUTPUT IN BINARY MODE .
    LOOP AT v_xml_table INTO li_xml_table.
      TRANSFER li_xml_table TO g_file .
    ENDLOOP.
    CLOSE DATASET g_file.
ENDIF.
<removed_by_moderator>
Regards,
Prasad.
Edited by: Julius Bussche on Jul 16, 2008 2:43 PM

How to transfer menus from development to production instance

Hi,
Any suggestion on how to transfer menus between development instance to production instance would be really great.
Thanks
--Kumar

There is also an application which can do it for you without you need to know about the FNDLOAD command. We are using one of them.

How intelligent is the Workbench Request?

Hi,
I created an ABAP program and the Workbench Request was created too. I want to know before Releasing the Request if I go and modify the ABAP program may be after Few Days will that modification get added to the existing Request which was created at the time ABAP program creation?
Thanks,
Kishan

YA.. Until u release the request once created for a report(or any object) all the changes will reside in that request only. If u delete the existing request explicitly then a new request should be created again.
If ur doubt is cleared pl close the thread.
Regards,
Pradhiba

Transfer data from Test to Production Server

Dear All
I want to know how to transfer data from test server to production server.
Lets say we have done all the setup steps of GL, and we have also feeded chart of accounts, journal entries, recurring etc. at our test server. Now we want to shift our data from Test Server to Production Server.
What can be the procedure?
I shall be really thankful.
Best Regards
Muhammad Habib
http://mhabib.wordpress.com

Dear hsawwan
Thanks for your reply. Can you send me this document via email. My email id is: [email protected]
Secondly can you please tell me how to just transfer my Chart of Account.
I shall be really thankful to you.
Best Regards
Muhammad Habib

How to transfer passwords encrypted from client to server?

Hello dear community,
I have already some experience with programming and did a lot of web-software, but I never was facing the problem that passwords are transfered as plain text to the server when using a login-form.
For my front-end, I use Java ServerFaces 2.0.
I read a lot of hints like using a javascript based MD5 library and send the password as MD5 but this can be sniffed an decrypted easily.
Do you have some hints to easily implement a secure transfer of values from client to server?
best regards,
Berni

goose_fraba wrote:
and how to do that? how to configure etc.?Server specific. Read your server's documentation.

Request in Production server for Master data

Hi,
In Production server when we try to hire an employee through PA40, it is giving an error saying that "Client XXX has status 'not modifiable", Choose 'Display object' or 'Cancel'.
I think it is asking for a request, because of settings in SCC4,is not modifiable. Since it is PRD server the standard SAP suggests to have the setting as above hence we cant change the settings also.
What could be the solution for this?
Regards
Prasad

Hi Prasad,
It doesnt make any differnce, just click on display object , it will save th data in the respective tables.....
Regards,
Sushil Soni

How to deploy selected components on the production server with the same solution

Hello,
We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well.
Now, some issues and change requests have been reported regarding some components (web parts). We've made all the relevant changes. However, I want to deploy only those selected components (web parts) instead of entire solution again.
So, as per my understanding, if i include the selected components in the package/feature then at the time of deployment, wsp retracts the old solution and deploys the new one. When the new one won't have those web parts which didn't updated then portal/site
will start giving error and site will be collapsed.
Another option is to create another farm solution in Visual Studio 2010 and add the updated components in it. Then, we may be able to deploy it. Then, i'll be able to remove the old web parts from the selected pages and deploy the updated one.
Is there any better option which anyone could let me know?
Thanks!
Sohaib Khan

Hello,
We've a production server where we had deployed the visual studio based solution which contains all the web parts and their business logic. Production server is up and running live and end-users have started using it as well.
Now, some issues and change requests have been reported regarding some components (web parts). We've made all the relevant changes. However, I want to deploy only those selected components (web parts) instead of entire solution again.
So, as per my understanding, if i include the selected components in the package/feature then at the time of deployment, wsp retracts the old solution and deploys the new one. When the new one won't have those web parts which didn't updated then portal/site
will start giving error and site will be collapsed.
Another option is to create another farm solution in Visual Studio 2010 and add the updated components in it. Then, we may be able to deploy it. Then, i'll be able to remove the old web parts from the selected pages and deploy the updated one.
Is there any better option which anyone could let me know?
Thanks!
Sohaib Khan
Hi Sohaib, your another option is a good idea, only make sure to retract and remove the original from your farm, the add and install the new updated solution. And if you run into any error that says features already exist, you can use powershell, install-SPSolution
and -force to get the new solution deployed. http://tinyurl.com/q8erz72
Or, you could use Upgrade-SPSolution with a package that has same features from original, with the new artifacts. Although, if any of the original features are modified, I would recommend retract remove redeploy.
Stacy www.sharepointpapa.com

How to transfer local workbench request to production server

Similar Messages

Maybe you are looking for