How to transfer material from blocked stock  to scrap location

Dear Experts,
    Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
Due to this Iu2019m not able to scrap the material from blocked stock.
Pls advise what to do .Is there some other way to do it??
Thanks in advance

Hi,
You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
Dhruba
Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

Similar Messages

  • Withdraw material from blocked stock at subcontractor

    Hi
    We have Third Party Order process where in materials are directly received to subcontracting vendor stock, when Goods receipt is posted in receving plant.
    Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
    We would like to transfer the stock to unrestricted stock / scrap the stock from Subcontractor blocked stock.
    Kindly let me know your opinion to make transfer posting.
    Thanks and Regards
    Rajkumar

    Dear Yadav,
    1.
    Firste you wrote:
    Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
    After that you stated this
    It is about restricted stock at subcontractor.
    2.
    And materials are not subjected to batch management. So we cannot use MSC2N.
    So, your first statement was that the material is in "blocked" stock, after that you stated that it is in restricted-use stock. But you also stated that the material is not batch managed.
    "Restricted-use" is the status of the batch, so your material should be batch managed if its status is restricted-use.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63396b43a211d189410000e829fbbd/frameset.htm
    As I wrote you can use MB1A +553O if your material is in QI stock, if it is in restricted use you can't. If it is in restricted-use, please use MSC2N to change its status to unrestricted and after that comes MB1A + 551O.
    What is the real stock type the stock you are speaking? Who "posted" it to that stock type and how?
    Please give EXACT information.
    Thanks,
    Csaba
    Edited by: Csaba Szommer on Feb 10, 2009 10:50 AM

  • QM: How to Move material from quality stock to unrestricted stock

    Hi,
    How to post material stock from quality to unrestricted without using 321.
    Regards,

    Hi,
    if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
    if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
    regards,
    Adwait Bachuwar

  • How to transfer material from One HU strorage location another HU location

    Hi Guys
    Is there any procedure to transfer material Box from one HU storage location to another HU storage location
    thanks in advancve

    Hello,
    No you are wrong Vishal. We can use HUMO for HU movement. In the detaili of report screen of HUMO t-code, select the data and go to header tab "edit". You will get multiple option to do the transaction related to HU movement.
    Thanks
    Milind

  • MM Stock transfer from blocked stock between plants

    Dear friends ,
    Could I transfer material from Blocked stock between plants but in Blocked stock ?
    I not found this movement types in ECC.
    best regards,
    Ale

    It is not possible to move blocked stock between plants.
    You have to transfer the stock into unrestricted- then you can move it to the other plant- then again a transfer posting into blocked stock.

  • Unable to create Vendor return delivery from blocked stock

    Hello,
    Would like to know how to enable delivery picking from blocked stock.
    Some back ground : I am using Delivery type RL (Vendor returns). Required config is done in IMG.
    In our process we move defective material to blocked stock. Next create a Return PO to pick material from blocked stock.
    Next use VL10b to create delivery document against this PO.  We are able to create delivery & PGI from blocked stock.
    All above steps are executing seamlessly without any issue In our QA system.
    However in PROduction system delivery document does not find any qty in blocked stock inspite of being in the blocked stock.
    Please let me know where I could find the setting to enable delivery shipping/ PGI from blocked stock.
    Look forward to some good responses.
    Thanks,
    Ram

    Prerequisites
    When you enter a return delivery, you should reference the purchase order or the material document, so that the system can:
    Suggest data to simplify data input (for example, the storage location)
    Check that the returned quantity does not exceed the delivered quantity
    Reduce the quantity delivered to date
    Reverse other updates that occurred (for example, for a goods receipt into consumption) when the goods receipt was entered
    Before you enter a return delivery with reference to a purchase order, you have to determine whether the goods were posted to stock or to consumption, or whether they were posted into goods receipt blocked stock. If you posted the goods to a particular stock type at goods receipt (for example, quality inspection stock), you have to return them from the same stock type.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63351643a211d189410000e829fbbd/frameset.htm

  • Blocked stock to scrapping

    Hi Gurus,
    We have done the good issue from blocked stock to scrapping with mvt type 555. Oubound delivery is created for that good issue with unrestricted stock type. We need outbound delivery with blocked stock type for that good issue. Where we need to do the settings to get our requirement.

    there are SAP notes that explain that you can only do a delivery for stock in unrestricted use status
    OSS Note 496992 - Goods issue for delivery: Stock type
    OSS Note 547277 - FAQ: Requirements in SD and in the delivery
    However, there are people who found some alternative solutions:
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=326327&p=990466
    and
    http://www.sapfans.com/forums/viewtopic.php?f=6&t=335451

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Std SAP Programme , transfer the GR Batch Material to Block Stock.

    Hi All ,
    Could you please tell , which is the Std SAP Programme , transfer the GR Batch Material to Block Stock. (ECC 6.0)
    Thanks & Regards,

    such transfers will be made with movements, movement can be created with MIGO transaction or the old transaction MB1B (and several more)
    Just goto SE93, enter the transaction code, display the detail and you will find the program name.

  • Material at Blocked stock

    Hi to All,
    How can i unbloked the material, i created PID to adjust inventory 702  but it used awrong movement type 707
    can you please help me on how to reverse the block stock what are the transaction code and movement type
    Thanks,
    Ermin D. Concepcion

    Hi Ermin,
    You can try movement type 343 to transfer the stock from blocked stock to unrestricted stock
    via MB1B or MIGO_TR.
    Thanks and regards,
    Polly
    Edited by: Polly Gan on Apr 26, 2010 9:01 AM

  • Transfer material from Valuated project non valuated project

    Hi Experts,
    While i am trying to transfer material from Valuated project stock to Non valuated project with T.Code MB1B movement type 415 'Q', I am getting following error.
    WBS element  has different inventory valuation
    Message no. CN769
    Diagnosis
    The project definition for WBS element  only allows the following stock control:
    No project stock
    No project stock with defined valuation M
    ' ' = non-valuated project stock
    'M' = valuated project stock
    System Response
    Account assignment not possible.
    Procedure
    Change the settings for the project stock in the project definition (Control tab) or use a suitable WBS element.
    Kindly suggest me how to trafer material from Non valued project stock to valuated project stock.
    Regards

    Actually, you sohuld not be transferring stock to non-vlauated proejct directly. In case of non-valuated project, stock is never valuated while in case of valuated project it is valuated. So there is basic difference in valuation method. This will create inconistency if you attempt ot transfer it directly.
    You should rather transfer this stock to general stock and then transfer to non-valuated project stock.
    Regards,
    Mahendra

  • Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

    Hi Gurus,
    I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
    My Query is:
    1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
    2. What does it mean when we say Material to Material transfer ?
    Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
    Many Thanks,
    Madan

    Hi,
    Please help me with pointers on the mapping parameters for this BAPI.
    Here are the details which I am using, but gettin error message -
    T ID                   NUM MESSAGE
    E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
    I have filled below fields:
    GOODSMVT_HEADER
           PSTNG_DATE                   11/25/2009
           DOC_DATE                       11/25/2009
           PR_UNAME                        MyName
           HEADER_TXT                    TEST
    GM
    04  (Transfer Posting)
    GOODSMVT_ITEM
               MATERIAL                       100001374
               PLANT                          1AAE
               STGE_LOC                       B100
               BATCH                          0111331309
               MOVE_TYPE                      343
               ENTRY_QNT                                10.000
               ENTRY_UOM                      EA
               ENTRY_UOM_ISO                  EA
               MOVE_MAT                       100001374
               MOVE_PLANT                     1AAE
               MOVE_STLOC                     B100
               MOVE_BATCH                     0111331309
    Need your help to resolve this.
    Many Thanks,
    Madan

  • How to transfer parameters from one ivew to another-both are in diff. page

    Hi All,
    My requirment is pass the parametrs from one ivew to another ivew(both are different PCD paths). now i am able to see the value in second ivew using java script .Here my problem is come.
    How to transfer varibles from one i vew to another ---Afetr seeing so many forums in SDN.I came to know that EPCM is Best. Using EPCM i am able to transfer the varible and able see the vlues in javascripts(Using alert command).
    From java script how to transfer varible to bean-----afetr seeing forums i came to know that using HTTPSession we can pass parameters to bean. but i am unable to code where i need to call httpsession api methods,it mean that i need to code under  java script , JSp and controller page.
    it is very urgent for me,
    thanqs in advance

    Hi,
    Goto LT01 transaction with Movment type = 999 and stock category = Required stock category. Create a PCN and process the remaining process so as to change the stock type.
    Regards,
    Dilli Babu R

  • Required reference document to issue the material from project stock

    Hi All,
    we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
    the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
    i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
    please help me out to resolve this requirent.
    manoj singh
    we can

    Hi,
    Did you implement PS module in your system?  How were your project stocks reserved?
    Cheers,
    HT

  • How to transfer data from ECC to CRM via IDocs (Clfmas01),

    Hi all,
    how to transfer data from ECC to CRM via IDocs (Clfmas01), that to material master data from ECC to Production master data in CRM.    
    Need Information regarding, how to upload file to CRM from ECC, through, IDocs......Plz help me...
    Edited by: khaja fareed on Jan 11, 2010 12:44 PM

    First of all push ECC data in to GTS server through T.code:/N/SAPSLL/MENU_LEGALR3. First click on Master data tab there enter customer/vendor number then execute.
    2-Go to document tab there enter Sales order no/PO number then execute it.
    Then go to GTS server in compliance management module you can get all the information.
    Regards
    Sitanshu Panigrahi

Maybe you are looking for

  • ALV report: How to merge 2 columns into 1 column?

    Hello, I have a list of data which I would like format the header to look as below: | - Quater 1---- | - Quater 2 - | - Quater 3---- | - Quater 4---- |  <--- header 1 | Jan | Feb | Mar | Apr | May | Jun | Jul | Aug | Sep | Oct | Nov | Dec | <--- head

  • Photos from i phone to computer

    I have a new i phone and tried to copy my photos off the i phone via i tunes to my computer.  It has wiped off all the photos in my photo library/album and left the ones I wanted to download ie the ones in camera roll that I took with the i phone its

  • Sharepoint 2013 and SSRS how to send reports on date schedule after dw load completes

    Certainly with subscriptions we can generate a SSRS report on a schedule like say every Monday morning at 5 AM PT.   My problem is I want to run those reports but I want to make sure the Datawarehouse completed its load first.  Example if for some re

  • Problem with XSLT: xsl:copy

    xsl:copy let us copy a node from the source to the result of a XSLT transformation. My problem is that each element is copied without its attributes ! For example a template: <xsl:template match="myelement"> <xsl:copy> <xsl:apply-templates/> </xsl:co

  • Movie in icloud

    How do i watch a movie that is in icloud? Like when on a flight with zero wireless.