How to transfer Material Master data information from ECC to CRM

Hi ,
Changes to the Classification data of Material master for the class type-001 and Custom
ZFIELDS on mara will trigger the Interface functionality. Any changes to the
custom zfields and classes or characteristic values on Material Master must transfer the information from ECC to CRM. By using RFC .
Regards,
Pavan

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

Similar Messages

How to reflect the Master data changes from ECC to MDM

Hi Experts,
We need to reflect the master data changes of company code and cost center groups from ECC to MDM.
what methods available and which would be best in performance.
kindly let me know if you need further information for better undrstanding.
Thanks in anticipation
looking forward to hear from you all,
with regards,
Chandhan.S

Hi,
You need to use change pointer to do this. Go to transaction SALE,
expand MODELLING AND IMPLEMENTING...
expand MASTER DATA DIST...
expand REPLICATION OF MODIFIED DATA
You may need to maintain distribution model in SALE.
Cheers.
Reward if useful

How to delete Master Data transferred from ECC to APO via CIF

Hi, all
I'm connecting SCM 5.1 with ECC 6.0 via CIF.
When activating Integration Model in ECC, the following error occurred;
"Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
Please tell me how to do this.
For details, please read the followings;
I connected APO client with ECC client 590.
I transferred Plant and Material Master from ECC to APO via CIF.
After that, I wanted to change ECC client from 590 to the other.
I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
Here, I faced the problem.
The initial data transfer failed due to the duplicate of data.
Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
thanks in advance,
Hozy

Hi all,
Thank you very much indeed for lots of your replies.
Thanks to all of your advices, I'm getting to understand what to do.
Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
Then, I've got next issue here.
In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
Thanks in advance.
Hozy

How to maintain material master data in plant....

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Hi,
Please check the below link for MMR creaion .
http://web.mit.edu/sapr3/windocs/bpmdb01m.htm
Regards,

How To Transfer the master data from R/3 to APO System

hi this is mohamed .i m new to APO..
can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
Thanks in advance
Regards
Mohamed.

Welcome to SDN.
refer this link
creating integration model
Give ur mail id i will send the document which i have.
With regards.
Maya.

How to avoid material master data migration of inactive materials to SRM

We are replicating material master from R3 4.6b to SRM 5.0 system. Under COMMPR01 , we can see the product status as deleted or locked .
How we can avoid the master data replication of materials which are already flagged as inactive (deletion) in R3.
Pls suggest.
Regards,
Avinash

Hi
Please try this ->
1) It is possible to use product_id without needing to replicate material masters from R/3 to SRM. For this to work you have to set the flag "Do not check product" in customizing
(see SRM Server > Master Data > Define External Web Services).
We do it like that and it works perfect for us. Only annoyance is, that we have to put leading zeroes in the product_id field.
"Do not check product" is used to avoid product check in SRM (to avoid replicating products into SRM), so they are not checked against SRM product master.
But this is not related to R/3 check.
In a classic or extended classic scenario, SRM will check that this material exists in the backend, especially for the current plant (location), before creating follow on doc.
As you created your catalog item without zeros, I guess SRM is sending this material to R/3 that does not recognize it.
Then you have this error message. Adapt your product IDs to be aligned with R/3 material master.
2) Try to run the report BBP_PRODUCT_SETTINGS_MW, there you select user as SRM instead of CRM and select service product active
3) Did you already checked OSS note 722600 and 366135 ? Also, Check the SAP OSS Notes - 786345, OSS Note 456753. It talks abt the internal and external representation of product ID in catalog and R3 system.
Related useful pointers ->
Product xx does not exist in plant xx or it has been flagged for deletion
Stock reservation movement (field XWAOK) is not flagged in ECC ??
Product XXX does not exist in plant YYY or it has been flagged for delete.
material deletion flag
Product XXX does not exist in plant YYY or it has been flagged for deletion
Hope this will help. Do let me know.
Regards
- Atul

No master data upload from ECC to GTS

Hello together
today I have opened an OSS Note regarding a problem at our client side.
We implement SAP GTS 7.2 SP08 but I`m not able to upload any master data (customer and/or material) from ECC to GTS. This is my third implementation project. On both projects in the past, I didn`t had such a trouble with this topic in the past.
I searched the whole forum and tried every hint - everything without any success. ;-(
Unfortunately, the OSS Note is in German. But I hope that anyone could help me to find an solution. Thanks to all very much.
Here is the OSS Note:
Keine Initialüberleitung von Kunden- und Materialstämmen OSS-NOTE: 0000637481
Alle notwendigen Supportpackage-Stände für R/3, PlugIn und GTS sind eingespielt gemäss MasterGuide.
R/3 client:-
- RFC Destinationen korrekt eingestellt. Laufen sauber
- Methodenaufrufe korrekt eingestellt
- ALE Verteilmodell korrekt eingestellt
- Änderungszeiger global aktiviert
- Änderungszeiger korrekt eingestellt (siehe unten)
Customer master /SAPSLL/DEBMAS_SLL
Vendor master /SAPSLL/CREMAS_SLL
Material master /SAPSLL/MATMAS_SLL
- Ànderungszeiger den jeweiligen Funktionsbausteinen zugeordnet (siehe unten)
/SAPSLL/DEBMAS_DISTRIBUTE_R3
/SAPSLL/CREMAS_DISTRIBUTE_R3
/SAPSLL/MATMAS_DISTRIBUTE_R3
- Nummernkreise für Änderungszeiger angelegt
GTS client:-
- Logische Systeme angelegt und Gruppen zugeordnet
- RFC Destinationen korrekt eingestellt. Laufen sauber
- Methodenaufrufe korrekt eingestellt
- Partnermapping eingestellt
- Organisationsstrukturen angelegt und Buchungskreis bzw. Werken aus
Vorsystem zugeordnet
- Nummernkreise angelegt
Beispiel:
1. Kundenstamm im Vorsystem hat keine PLZ in den Stammdaten. Bei Übertragung nach GTS wird im GTS-System ein Überleitungsprotokoll erzeugt, mit dem Hinweis, dass Kunde nicht übertragen werden konnte aufgrund fehlender PLZ. Korrektes Systemverhalten.
2. Kundenstamm wurde entsprechend im Vorsystem gepflegt. Bei erneuter Übertragung wird angezeigt 0 von 1 Partner übertragen. Ein Überleitungsprotokoll in GTS wird nun nicht mehr erzeugt.
Auch unter Transaktion SLG1 wird im Vorsystem kein Anwendungs-Log
geschrieben. Ebenfalls gibt Transaktion SM58 keine Fehlerhinweise.
Edited by: Andreas Drees on Jun 29, 2009 3:35 PM

Hi Sameer,
thanks very much for your instructions. We created the variants and debugged it. Now fe found out, where the error occurs.
The call function for calling GTS "/SAPSLL/API_1006__SYNCH_MASS" gives us following message:
"Not just yet all adress numbers are collected."
Then on the other hand the SAP Basis suppors gaves us a possible solution. They told us:
The problem occurs, because the tables TBD24 and TBD62 are not filled correct.
Please use the following steps to correct this:
- Transaction BD53
- Select Message type (/SAPSLL/CREMAS_SLL, etc.), change mode
- Choose segment (mark an unmarked segemnt)
- save
- Delete the activated segment
- Activate change pointer
- in TA BD60 set up the function module correct (/SAPSLL/DEBMAS_DISTRIBUTE_R3)
The tables should filled correct after these steps. You can check it with report /SAPSLL/PLUGIN_CHECK_R3.
So I we went through these steps - but without any success. I`m getting crazy. ;-(
Regards,
Andreas

Reagarding Master Data loading from ECC

Hi i want to activate Master Data for Customer and Material from ECC ,Can any one give me the clear steps ,and also i want to know what is the source for these Material And Customer in ECC.

Hi
The datasources are 0CUSTOMER_ATTR and 0MATERIAL_ATTR you can find these in RSA6 if activated under SAP-R/3->LO->LO-IO.
Assign these to 0CUSTOMER and 0MATERIAL infoobjects in BW for a direct update or you can use the following infosources for flexible update
0CUSTOMER_ATTR
0MATERIAL_ATTR
Also use texts datasources 0CUSTOMER_TEXT & 0MATERIAL_TEXT
If the above mentioned datasources are not activated (NOT VISIBLE IN RSA6), use RSA5 transaction code to activate them.
Hope you are familiar with BW and good luck
Regards

Master data replication from R3 to CRM

i have pulled the master data from R3 to CRM .data is showing in table but000 and crmm_but_custno but it is not showing in the BP transection.
when i am searching in BP it is not showing but i can see in the table(but000 and crmm_but_custno)
What should i have to do .
Pl suggest !!!!

Hi sunil,
while searching for data in BUT000 are you searching based on BP number or content of the table? At the same time while searching with TCODE - BP on what basis you are searching?
If the data is replicated into the BUT000 it should come out with the T-Code BP also. For your problem there will be 2 possibilites.
1) the data is not at all replicated and you may looking at the old data.
2) Due to improper number ranges for R/3 and CRM eventhough the data is replicatd into CRM you can't find it because it taken some other number range.
For ex: you have created a Customer in R/3 i.e 5000456, when replicated it will take some othe number XXXXXX.
So, while searching with BP T-Code search data on the basis of first name, last name or searchterm instead of BP number.

How to Transfer factory calendar to APO from ECC

Dear friends,
I came across the statement in SCM210 material that factory calendar can be transferd from ECC to APO. If anyone knows about it can you please explain me with steps?
Sree

Sree,
you can transfer the factory calendars from ECC to PAO following these steps:
in APO:
Transaction RSA1
Select Source systems>SAP>your R/3 client.
Right click on the client>Select Transfer Global Settings.
Select Factory Calendars
Select Rebuild tables
Cheers!
Abhi

How to activate delta download for BP from ECC to CRM

Hi,
i have completed BP initial download from ECC 6.0 to CRM 5.0.
i dont know how to activate the Delta download?.
Plz anyone tell me the procedure.
regards
geetha.g

Hi Geetha
Synchronization download allows you to synchronize inconsistent datasets on various databases. This can be controlled in time slots or can be triggered manually.
1. Creating a Request
Choose Middleware -->Data Exchange --> Synchronization --> Define Requests.
To define a new data request, choose Display --> Change and New Entries.
Enter data for the request.
In object name enter CUSTOMER_MAIN
2. Starting the Request
Choose Middleware --> Data Exchange -->Synchronization --> Synchronize Objects.
A selection screen appears. Enter the objects to be synchronized or use F4 input help to select objects. Choose Execute to start synchronizing the data.
3. Monitoring Request
Choose Middleware --> Data exchange --> Synchronization --> Monitor requests
Enter an object name or a range of object names. Use the input help or of you want to display all the objects, do not enter an object name at all. Choose Execute.
Further help is available on http://help.sap.com/saphelp_crm50/helpdata/en/c7/95fc381478ab6fe10000000a11402f/frameset.htm
Hope this would help.
Regards,
Rekha Dadwal
<b>You gain a point for every point that you reward. So reward helpful answers generously</b>

How to replicate a customized condition table from ECC to CRM

Dear All,
We have created a new condition table in ECC, using a new set of key fields to define sales district specific product price. This table is in ECC only and we would like to replicate it to CRM. Could you please let me know how we can do that? What replication object should we use?
Thanks in advance!
Erinn

Hi,
Use DNL_CUST_CNDALL, this would create the database table in CRM. Also you might need to run other loads corresponding to your scenario like DNL_CUST_CND_PR, DNL_CUST_PRC etc
Regards
Prasenjit

Non-SAP to SAP Material Master Data Transfer

Hi Experts,
Please indicate any standard tools in SAP and how to use it wherein we can migrate non-SAP material master data to SAP.
Points will be awarded.
Regards,
LM

Hello Leo,
There are a number of options to do this. You can use the standard SAP tool named LSMW - Legacy System Migration Workbench (transaction LSMW) as a starting point.
Also please read this [Documentation|http://help.sap.com/saphelp_47x200/helpdata/en/0d/414538bc0fe927e10000009b38f8cf/frameset.htm] before undertaking the data migration activity via LSMW.
Additionally, there is also a Direct Input program available named RMDATIND - please go through the program documentation before you use it. You can use this program to transfer material master data to SAP but
make sure you assign this program through LSMW for mapping structures etc. The internet link above will give
more details and step-by-step instructions to follow.
Hope this helps,
Cheers,
Sougata.
p.s. It is sad to see useful answers remain unrewarded such as this one!
Edited by: Sougata Chatterjee on May 9, 2008 10:13 PM

Transfer of material master data with Classification view

Dear Experts
I want to transfer material master data between R/3 using ALE. We are able to send master data using BD10 without classification view.
Please let me know in detail the configuration, steps invloved in sending materail master along with classification view.
Regards
Samal

HAI FRIENDS,
CHANGING CLASSIFICATION VIEW FOR MATERIAL USING BAPI
->CREATE CHARACTERISTIC USING TCODE CT04
->CREATE CLASS USING TCODE CL01 .
-> RUN THIS PROGRAM TO CHANGE THE CLASSIFICATION VIEW
PARAMETERS: P_MATNR TYPE MARA-MATNR. "MATERIAL
DATA: OBJECTKEY TYPE BAPI1003_KEY-OBJECT,
OBJECTTABLE TYPE BAPI1003_KEY-OBJECTTABLE,
CLASSNUM TYPE BAPI1003_KEY-CLASSNUM,
CLASSTYPE TYPE BAPI1003_KEY-CLASSTYPE,
ALLOCVALUESNUMNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_NUM WITH HEADER LINE,
ALLOCVALUESCHARNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CHAR WITH HEADER LINE,
ALLOCVALUESCURRNEW TYPE TABLE OF BAPI1003_ALLOC_VALUES_CURR WITH HEADER LINE,
RETURN TYPE TABLE OF BAPIRET2 WITH HEADER LINE.
OBJECTKEY = P_MATNR.
OBJECTTABLE = 'MARA'.
CLASSNUM = 'MTS_CABLE_BIN1'. "CLASS(CREATED USING CL01)
CLASSTYPE = '023'. "CLASS TYPE (023 FOR BATCH)
CALL FUNCTION 'BAPI_OBJCL_CHANGE'
EXPORTING
OBJECTKEY = OBJECTKEY
OBJECTTABLE = OBJECTTABLE
CLASSNUM = CLASSNUM
CLASSTYPE = CLASSTYPE
STATUS = '1'
STANDARDCLASS =
CHANGENUMBER =
KEYDATE = SY-DATUM
NO_DEFAULT_VALUES = ' '
IMPORTING
CLASSIF_STATUS =
TABLES
ALLOCVALUESNUMNEW = ALLOCVALUESNUMNEW
ALLOCVALUESCHARNEW = ALLOCVALUESCHARNEW
ALLOCVALUESCURRNEW = ALLOCVALUESCURRNEW
RETURN = RETURN
LOOP AT RETURN.
WRITE: / RETURN-TYPE ,RETURN-MESSAGE.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
BY VENKATESWARAREDDY D
MYTEC SOFT LTD

Material master data connect to custom data

Hi Experts,
I have transfer material master data from ECC to GTS,I also have created tariff code in GTS system,
but I just know to connect them by manual, Can anybode tell me ,How to connect them by mass ?

Hi Billy,
If you want to classify materials in mass, you can use the classification worklist (there are each for compliance/customs tariff/commodity codes) or upload the material classification from a file.
There you can select several in an ALV and classify them in once..
Hope this helps a bit,
Cheers,
Branio

How to transfer Material Master data information from ECC to CRM

Similar Messages

Maybe you are looking for