How to transfer Message Interface from Repository to Directory

Hello,
I have created a Message Interface (with related Message Type, Data Type) and Interface Mapping from this interface to another in Integration Repository. Then I go to Integration Directory and trying to create Interface Determination. I can select proper Interface Mapping, but it doesn't show my Inbound Interface that I created for this Mapping (means in the popup hat I trigger in the Inbound Interface it shows no entries).
It seems like some data has not been transferred from Repository to Directory. What should I do to synchronize them?
Thanks,
Maxim.

Hi Maxim,
If you dont activate the inteface you will not see. Even if you activated if you dont see in ID then you need a cache refresh. You dont need to do cache refresh everytime, because it will be automatically do. Just in case if you dont see then you can refresh manually. Also only for business service you need to add manually. For business system you will pick it up from the list.
Regards,
---Satish

Similar Messages

How to bring customised objects from repository to directory

Hi all,
In integration directory from menu options --> tools --> transfer scenarios from integration repository --->
i am unable to get the objects which i have created in repository. All default list (bpm and basis system ) is getting. Could you pleaz suggest me how can i bring the objects from repository to directory.
warm regards,
Mona

Hi,
have a look at this weblogs series to see how it's done:
/people/shailesh.mane/blog/2006/06/27/b2b-configuration-part-i--creating-an-integration-scenario
/people/shailesh.mane/blog/2006/06/29/b2b-configuration-part-ii--creating-the-configuration-using-the-automated-configuration-tool
Regards,
michal

How to transfer Messages history from Mavericks to Yosemite clean install

I would like to do a clean install of Yosemite on my MacBook, but retain all of my Messages history and attachments from my current Mavericks install. Is this possible? What files do I need to copy from the Mavericks install (before I wipe the HD) and where do I need to put them after I install Yosemite (cleanly)? Anything else I need to do after copying them?
Thanks!

I managed to finally get mine to work, but not after a bit of trouble and losing new messages since my time machine back up (about a days worth since my backup replaced my current. I backed up and upgraded last night, and I figured out how to restore messages this morning, so anything in between that I got on my phone was lost. no big deal).
Much of the below is from other discussions, so I don't want to take credit for it, but wanted to make it easy for you, and there was one small change.
First make sure you can see hidden files by opening terminal and inputting: defaults write com.apple.finder AppleShowAllFiles YES
QUIT YOUR MESSAGES APP
Replace the following files from your backup to your current clean install. Pretty much all the files should be in the same spot, except for one folder that I'll explain further below.
Same File path
/users/<name>/Library/Messages-------> /users/<name>/Library/Messages/ this folder should include 4 files:
chat.db
chat.db-shm
chat.db-wal
the folder "Attachments"
/users/<name>/Library/Preferences----> /users/<name>/Library/Preferencescopy any file that includes iChat or Messages in the .plist
Different File pathI am not sure if this matters, but it's something I noticed when I got a message in my clean install before trying to restore my history. In Yosemite, I noticed that that "Attachments" and "Archive" folder are both in /users/<name>/Library/Messages, whereas in Mavericks, the "Attachments" folder is in that file path, but the "Archive" folder is located in /users/<name>Library/Containers/com.apple.iChat/Data/Library/iMessages/Archive, and within this same folder there is a shortcut to the Attachments folder. (I'm not sure if this matters, but this worked for me). I hope I didn't confuse you there!
/users/<name>/Library/Containers/com.apple.iChat/Data/Library/Messages/Archive-------> /users/<name>/Library/Messages/
Restart your computer
Open Messages and it will rebuild your database.
Ta da!

Transfer Message Interface to QA

HI ,
I need to transfer Message Interface from our dev system to QA system.
in the dev system we created Message Interface and implemented abap program.
in tansaction sproxy i dont see any way to pack the interface.
How can i pack it?
Thanks,
Meirav

Hi...
If I am not wrong, then you are developing your interface in PI7.1. Correct me if my assumption is wrong.
You have to add your software components to the business system in the SLD, then only the MI will pop up in the inbound list.
Till PI 7.0, you could select the "ALL" and any inbound to the BS, but the correct way is to add the S/w component to your business system and then use the message interface in your interface determination/receiver determination.
Thanks,
Pooja Pandey

Topic: How to transfer purchased music from iTunes

Since the item <Topic: How to transfer purchased music from iTunes> is "locked" (whatever that means - typically, I got an error message when I clicked on the link!!) - I would like to state that despite downloading the iPod updater to deal with this problem, I cannot update my iPod because "the updater does not have a firmware image". I deeply resent not being able to move 100 tracks I have bought and paid for with my hard-earned money to my iPod. I trust that Apple will sort out this mess forthwith.

I have now solved this problem (almost by accident...).
Unfortunately, before you can update the iPod software on the older iPods you have to first do a Restore Factory Settings from the iPod updater (otherwise "updater cannot find firmware image'). Let the 'Restore' process run right through (it ends when the iPod fully reboots). You can then run the iPod software updater to Update from iPod 2.2 to 2.3 software, but afterwards you have to recopy all your songs from iTunes into the now empty iPod. I reloaded my iPod last night, and it took about 20-30mins using firewire for c.2400 songs. It worked for me, anyway. And the interface with iTunes is an improvement. Could have done without all the wailing and gnashing of teeth, though. Thank you, Apple.

How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunesb

how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files from i pod to itunes......

Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
- Senuti - http://www.fadingred.com/senuti/
- Phoneview - http://www.ecamm.com/mac/phoneview/
- MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
- Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
- Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
- iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
- Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
- 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
Additional information here https://discussions.apple.com/message/18324797

How to transfer purchased item from itunes to an ipod

how to transfer purchased item from itunes to an ipod? Spent about an hour and cannot figure out how to do that The best result this far was smth. like this to Sync a book means that all your music, songs, TV show and movies will be erased. What a strange Apple logic!

That message indicate that you are trying to sync with other than the one syncing computer/iTunes library that yo can have. You have to two choices:
- Make this computer your syncing computer by:
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
- The manual method of syncng specified here:
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
The manaul method on works for music and videos on other than your one syncing computer.

Removing Message Interface From Business Service

Hi Experts,
I want to remove one message interface from the Business Service.But, am not able to do so from ID.
Can anyone tell me how can this be done?
Thanks,
Sushama

hi,
>>>Business Service.But, am not able to do so from ID.
if you're talking about business service (not business system)
then just select the message interface and press the minus sign
that's all
if this is not possible you may not have sufficient authorization
Regards,
Michal Krawczyk

How to transfer vendor master from MM to SUS?

Hi friends
How to transfer vendor master from MM to SUS
Are the following steps correct
1.create vendor master in MM
2.use tcode BD14 in MM and enter partner system as SUS ( to send vendor master)
3.use BD15 in SRM to accept the master data from MM.
Please let me know if i am wrong
Thanks
Vinny

Hi Vinny,
Please follow below steps for transferring vendor master from MM to SUS.
!) Create a vendor master in MM and assign class type ALV under enviornment-Classification tab.
2)Go to BD14 and enter following fileds
Vendor number
Class
Message type
Target System...
Before doing BD14 hope you have done all the partner profile configuraion as well as model view creation and mapping has been established between MM to XI to SUS.
Before repliating vendor, please note that vendor root org unit has been created in SUS system.
After executing BD14 then check in your mm system WE05 whether idoc has been generated and sent to XI system.
If sent to XI system successfully then please check in SXMB_MONI t-code in XI what is status then finally check in SUS.....
If useful points please...
Thanks
Ravi

How to transfer main entities from instance A to instance B

Hi community,
Does anyone knows where to find a script to extract main entities (vendors/fixed assets/customers/items) from 11.5.10.2 to be imported to new fresh configured instance 11.5.10.2 using open interfaces?
Thanks in advanced.
Jaime Millan

Hi Ganesh,
According to your description, you want to know how to transfer the logins from one instance to another instance for SQL Server 2008 R2. To do this, besides dave’s post, you could also use
'Copy Database Wizard' in SQL Server Management Studio, or the component
'transfer Login task' in SQL Server Integration Services.
Regards,
Michelle Li

HT201269 Trying to figure out how to transfer my ringtones from my 4s to my 5, do anyone know how? Ringtones only everything else transferred.

Trying to figure out how to transfer my ringtones from my 4s to my 5, do anyone know how? Ringtones only everything else transferred.

Hi Friend,
You need to connect your iPhone in your computer and open iTunes.
1. Place your rintones file (.m4r format, up 30 seconds) to a designated area (e.g. desktop)
2. Import your ringtones file into your LIBRARY, NOT directly into your iphone.
3. "TONES" or "RINGTONES" icon will appear on the left hand column under LIBRARY. (You should see Ringtones there. If not..... Click Edit --> Preferences --> General Icon Ensure that Ringtones is checked. If not, check it then click OK…)
4. Drag your ringtones file from your LIBRARY into your iphone.
5. "TONES" or "RINGTONES" icon will appear in your iphone under devices (the tab where Summary, Info, Apps, etc are located)
6. Click Under "TONES" or "RINGTONES" (as mentioned in Fifth) and tick SYNC tones.
7. Look inside your iphone... and there it is
*Set Message Notifications:
Settings > Notifications > Messages >
     Notification Center: ON
     Show: choose 1/5/10 Recent Items
     Alert Style
          choose Banners or Alerts
     Badge App Icon: ON
     Show Preview: ON
      Repeat: choose up to 10 times
     Show iMessage Alerts From:
          choose Everyone/My Contacts Only
     View in Lock Screen: ON
To see Notification Center, on Home Screen where your apps icons are, swipe from the top to the bottom.

HT3529 Does anyone know how to transfer messages to computer

Hi was just wondering if anyone knew how to transfer messages from iphone to computer or how to view on computer? Thanks

Requires third-party software to extract from your phone:
http://www.wideanglesoftware.com/touchcopy/index.php
On a Mac:
http://www.ecamm.com/mac/phoneview/

How to transfer sales bom from SAP R/3 to APO?

Hi Experts,
I just want to ask how to transfer sales bom from R/3 to APO? if i change my bom usage to 5 and use this BOM in my Production version be enough to send it to APO?
Also, this is my first time using sales bom, could you please help me understand how sales bom work in APO planning?
Thanks so much.
Mylene

Hi Senthil,
Thanks again for your reply. I was trying to CIF sales BOM in APO but only the header material are being created in APO. The component are not added in PDS. This is how I create it in SAP R/3:
1. transaction cs01 --> enter header material, plant and BOM USAGE =5
2. inside cs01, i entered components, quantity for each components and ITEM category = L (stock item)
i also eneterd base quantity for header material
3. create production version for header material with routing and this BOM
4. create and activate material CIF model for header and components
5. create and activate PDS CIF model for header and components.
After doing all these steps, PDS is created in APO but I only have the header material (no components)
I tried changing BOM to other bom usage and components were populated in PDS.
Am i missing nay steps? Thanks.
Regards,
Mylene

HT5824 Does anyone know how to transfer my contacts from my iphone onto my icloud that is on my laptop please? I have lokd and tryed everything and still i have no idea how to do it.Yur help would be apreiated.thanks

Does anyone know how to transfer my contacts from my iphone onto my i cloud please? I cnnot do it no more s they have made something so simple to do into a task that seems so omplicated.ive tryed ooads and now im starting to loose my cool.Thanks if you can help.I bet it's really easy to do,but im not seing it clearly.

On your Mac.
Sign into iCloud, turn Contacts and anything else you want, on.

How to transfer printer settings from one Mac to another (both OSX)?

Hello, I have not found a detailed description on how to transfer printer settings from one Mac to another.
My issue is that I have a Mac G5 with 3 different settings saved as "presets" for the same printer. This works great, since the posters I print (on the large format printer) need different margins and different paper at times.
This G5 is basically retired and only used for printing. G5 has OSX 10.3.9
I have a MacPro as its replacement (OSX 10.4.11).
The MacPro has all my apps and other settings setup to my liking.
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
If someone would list the steps needed to accomplish the transfer of printer settings or advise if this is possible, then I would be very grateful! The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
Thanks!

Hi SCChelpdesk, and a warm welcome to the forums!
I found several links via Google saying copy this folder or directory, but I am not sure I did it correctly. I don't see the "presets".
This is the File that holds that info on Tiger, not certain on Panther...
/Users/YourUserName/Library/Preferences/com.apple.print.custompresets.plist
After moving, you very well might have to change the Owner's Permissions within Get Info window, then log out/in.
I tried launching the Migration Assistant (I hope that's the correct name), but was concerned the settings on the new MacPro would be overwritten with ALL the old stuff on the older G5. I did not start the transfer process because of this.
MA would transfer the info, but/and, if the user that had that info had the same Shortname as on the new one, it'll demand you give it a new Shortname to use... but then those settings would be transferred to that new user on the new machine. I think the 1st one will work though.
The previous user of the G5 I am using was a "Genius" and I don't know how he created these "preset" choices.
We can go through that way if you like... not all that hard.

How to transfer Message Interface from Repository to Directory

Similar Messages

Maybe you are looking for