How to transfer more than 1 file usong bluetooth t...

Can anyone tell me how to transfer more than one file via Bluetooth. I am using Lumia 720.

Hi,
My theory is that Windows get confused when it is opening the program file and the following intsructions should create a unique copy. I have produced the instructions in detail because I am never sure how much people are use to - forgive me you know much of it.
Open Windows or Folder Explorer
Navigate to C:\Program Files (x86)\Adobe\Photoshop Elements 12
Look for PhotoshopElementsEditor.exe
Right click on the file and select Copy
Right click on a blank space and select Paste - you should get a prompt asking if you want to continue - you do - this should produce a copy of the file
Rename PhotoshopElementsEditor - Copy.exe to PSE 12 ED - you should get a prompt asking if you want to continue - you do
Close the Explorer
In the Windows Control Panel, select Default Programs
In Default Programs, Select Associate a file type … - it will take a while to display the list
Scroll down to the type you want to select - say .jpg and select it
Click on the Change program button
Click on the Browse button
Search for the PSE 12 ED file renamed in 6 above, select it and then click on the Open button
Click on OK and close the Default Programs
Now try your tests. I can get multiple files to open as well as retain Expert mode.
Good luck
Brian

Similar Messages

How to transfer more than one files over internet at once?

hi, friends,
I just wonder how to transfer more than one files from one computer to another over internet at once. Not using ftp. pls any one give me the solution.

This isn't hard to do, but it depends on your exact need. I did something very similar to let me upload all my mp3 file from home to work using sockets (don't have the code anymore..).
What I did was implement a "pull" approach rather than a "push" approach. In other words, everytime my server got a request from a client, it served up the next file. It didn't know or care that the client was always the same.
If you can set up a server to serve one file when a client attaches, then basically just put that code in a loop.
If this doesn't meet you need, it might still be helpful as a starting point...

How can i transfer more than one file from server to client

Hi,
our requirement is transfer more than one files from server to client using the
webutil_file_transfer.as_to_client_with_progress.One file transfer is already working in our system.If anybody know the solution please inform
regards
mat

just an idea ...
for this purpose let us put aside security concerns and other potential problems....
-- Get the content of a server directory with Filter and create zip file
1) create a class that implements java.io.FilenameFilter ...
2) define accept() method ...
3) call File.list() with the filter as a parameter. The returned array of strings will have all the names that passed through the accept() filter
4) use java.util.Zip to create ZIP file on the server side
-- I think it is better to create this functionality as a separate Java class, put it in required folder and after it
-- use Forms->Program->"Import Java class" to create pl/sql wrappers, than to create wrappers for all classes and code in pl/sql
5) use webutil to transfer file on the client
6) use Java on client side to unzip transferred file
if you think this is not too complicated, you should try ...
Regards,
Vladimir

How to include more than 12 files in a new PDF document?

I have a Adobe PDF Pack, and when I click on crating a new PDF document, they say that I cannot combine more than 12 files...!
And I want to have a document of hundreds of pages!
Someone can help me?
Pleeeeaaase!!!!!!

Hi Hisami,
Thank you very, very much!
It is very useful what you explain.
One only question, since I have the trying version of Acrobat Pro: how many files can you combine at the time with it?
May be it depends on the files size.
I tried yesterday to combine 50 files at the time and it just blocked everything...
Thanks a lot!
Have a very good day.
Henric
Henric Caldas
30 rue de Belleville
75020 Paris
Home : +33.1.46.36.04.55
Mobile : +33.6.59.08.02.27
[email protected]
Le 28 janv. 2014 à 22:48, "H.Spector" <[email protected]> a écrit :
Re: How to include more than 12 files in a new PDF document?
created by H.Spector in Adobe PDF Pack (formerly CreatePDF) - View the full discussion
To combine more than 12 files into a single PDF file:
1. Combine file 1 to file 12 then name it (combined 1 for example)
2. Combine file 13 to file 24 then name it (combined 2 for example)
3. Keep doing those steps #1 and #2 then combine "combined 1, Combine 2.....Combine 12).
Another way is to use Adobe Acrobat. Please download Acrobat XI Pro Trial version from www.adobe.com or you can upgrade your subscription to Acrobat Plus(please see more information about Acrobat Plus subscription at https://www.acrobat.com/acrobatplus/en/home.html?trackingid=JPZKR).
In Acrobat XI Pro:
1. Launch Acrobat
2. Select "File" menu > Create > Combine Files into a Single PDF
3. Click "Add Files" button at top left corner
4. After adding your files click "Combine" button at the bottom of the dialog.
Thank you
Hisami
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6062261#6062261
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6062261#6062261
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6062261#6062261. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe PDF Pack (formerly CreatePDF) at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

How to input more than one currency field into the transfer rules?

hi experts,
how to input more than one currency as well as unit fields in transfer rules, when i am giving two currency fields in flatfile the same structure could not able to get in transfer rules ( 0currency).
pl give me the procedure to input more than one currency field.
thanks & regards
venkat

Hi Venkat,
For example - for amount kf - if you have 0currency as ref object and included in transfer rules and for other kf - create a Zcurr object and try to include...hope it works.
Thanks,Ramoji.

I have an HP Photosmart C4180 all in one printer scanner and copier, I can't figure out how to scan more than one page at a time and then send as a PDF file via email

I have an HP Photosmart C4180 all-in-one, printer, scanner and copier. I can't figure out how to scan more than one page? It will only let me do one page at a time and then I have difficulty sending pages 1, 2 and 3 as one docuement. Any ideas??
Thank you, Jetteski

Hello Jetteski,
Hello Jetteski, Thanks for the post.
Since you are running a MAC, check the below links for some excellent information on scanning. Good Luck!
http://goo.gl/M8Cl2
http://goo.gl/cufK6
http://goo.gl/OTQoR
I work for HP but my posts and replies are my own....Thank you!

How to insert more than 12 items using BDC for MB1C

Hi,
When we use LSMW for data transfer of MB1C transaction, more than 12 items can be inserted in a document.
But using BDC only 12 and below is possible, if the flat file system has more that 12 item, then the document is not created.
How to insert more than 12 item in a document.
Regards

Hi Gow,
I have uploaded the MB1C through a BDC and it is working fine for n no of items.
Here is the code. May be this will be of your help.
*& Report ZMB1C
report ZMB1C
       no standard page heading line-size 255.
type-pools : slis.
tables : t100.
data: begin of record,
        MATNR(018),
        ERFMG(017),
        EXBWR(016),
      end of record.
data : itab like table of record with header line.
data : w_bdcdata type bdcdata.
data : t_bdcdata type standard table of bdcdata initial size 1.
data : messtab type standard table of bdcmsgcoll with header line.
data : mstring(300).
data : vf_index type i,
       no_lines type i,
       count type i value 0.
data : v_bldat(20),
       v_budat(20).
*Excel Sheet Data Upload Details
data : vf_start_col type i value '1',      "start column
       vf_start_row type i value '2',      "start row
       vf_end_col   type i value '100',    "maximum column
       vf_end_row   type i value '10000'. "maximum row
*/ Internal Table For Excel Data
data : it_excel type kcde_cells occurs 0 with header line.
*/ Field symbol
field-symbols : <fs>.
data : begin of it_messtab occurs 0,
       plant(10) type c,
       status(10) type c,
       message(90) type c,
       end of it_messtab.
*Data for ALV display
data : wa_fcat type slis_fieldcat_alv,
       colcnt type i.
data : it_fieldcat type slis_t_fieldcat_alv,
       i_events type slis_t_event.
data : l_title type sychar70.
data : l_repid like sy-repid.
* Selction Screen
selection-screen begin of block b1 with frame title text-000.
parameters : p_file like ibipparms-path obligatory,
             p_mode like ctu_params-dismode default 'A'.
selection-screen end of block b1.
selection-screen begin of block b2 with frame title text-001.
parameters : p_bldat like MKPF-BLDAT obligatory,
             p_budat like MKPF-BUDAT obligatory,
             p_bwart like RM07M-BWARTWA obligatory,
             p_werks like RM07M-WERKS obligatory,
             p_lgort like RM07M-LGORT obligatory.
selection-screen end of block b2.
* At Selction Screen
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = ''
    IMPORTING
      file_name     = p_file.
*Start of Selection Event
start-of-selection.
call function 'KCD_EXCEL_OLE_TO_INT_CONVERT'
    EXPORTING
      filename                = p_file
      i_begin_col             = vf_start_col
      i_begin_row             = vf_start_row
      i_end_col               = vf_end_col
      i_end_row               = vf_end_row
    TABLES
      intern                  = it_excel
    EXCEPTIONS
      inconsistent_parameters = 1
      upload_ole              = 2
      others                  = 3.
if sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*         WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
if it_excel[] is initial.
    MESSAGE I000(ZCL_TCSABAP).
else.
    sort it_excel by row col.
    loop at it_excel.
      move : it_excel-col to vf_index.
      assign component vf_index of structure itab to <fs>.
      move : it_excel-value to <fs>.
      at end of row.
        append itab.
        clear itab.
      endat.
    endloop.
endif.
if not itab[] is initial.
    DESCRIBE TABLE itab LINES no_lines.
    clear messtab.
    refresh messtab.
    CONCATENATE p_bldat+6(2) '.' p_bldat+4(2) '.' p_bldat(4) into v_bldat.
    CONCATENATE p_budat+6(2) '.' p_budat+4(2) '.' p_budat(4) into v_budat.
    perform map_rec.
    call transaction 'MB1C' using t_bdcdata mode p_mode update 'A'
    messages into messtab .
    clear t_bdcdata.
    refresh t_bdcdata.
    loop at messtab where msgtyp = 'E' or msgtyp = 'S' .
      select single * from t100 where sprsl = messtab-msgspra
                                and   arbgb = messtab-msgid
                                and   msgnr = messtab-msgnr.
      if sy-subrc = 0.
        mstring = t100-text.
        if mstring cs '&1'.
          replace '&1' with messtab-msgv1 into mstring.
          replace '&2' with messtab-msgv2 into mstring.
          replace '&3' with messtab-msgv3 into mstring.
          replace '&4' with messtab-msgv4 into mstring.
        else.
          replace '&' with messtab-msgv1 into mstring.
          replace '&' with messtab-msgv2 into mstring.
          replace '&' with messtab-msgv3 into mstring.
          replace '&' with messtab-msgv4 into mstring.
        endif.
        condense mstring.
        it_messtab-message = mstring(300).
        it_messtab-plant = p_werks.
        if messtab-msgtyp = 'E'.
          it_messtab-status = 'Error'.
        else.
          it_messtab-status = 'Success'.
        endif.
        append it_messtab.
        clear it_messtab.
      endif.
    endloop. "messtab
    if not it_messtab[] is initial.
      perform buildcatalog.
      perform display.
    endif.
endif.
*&      Form Map_Rec
*       text
form map_rec.
perform bdc_dynpro      using 'SAPMM07M' '0400'.
perform bdc_field       using 'BDC_CURSOR'
                                'RM07M-WVERS3'.
perform bdc_field       using 'BDC_OKCODE'
                                'NPE'.
perform bdc_field       using 'MKPF-BLDAT'
                                v_bldat.
perform bdc_field       using 'MKPF-BUDAT'
                                v_budat.
perform bdc_field       using 'RM07M-BWARTWA'
                                p_bwart.
perform bdc_field       using 'RM07M-WERKS'
                                p_werks.
perform bdc_field       using 'RM07M-LGORT'
                                p_lgort.
perform bdc_field       using 'XFULL'
perform bdc_field       using 'RM07M-XNAPR'
                                'X'.
perform bdc_field       using 'RM07M-WVERS2'
perform bdc_field       using 'RM07M-WVERS3'
                                'X'.
loop at itab.
    count = count + 1.
    perform bdc_dynpro      using 'SAPMM07M' '0410'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'MSEG-EXBWR'.
    if count <> no_lines.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=NPE'.
    elseif count = no_lines.
      perform bdc_field       using 'BDC_OKCODE'
                                    '=BU'.
    endif.
    perform bdc_field       using 'MSEG-MATNR'
                                  itab-MATNR.
    perform bdc_field       using 'MSEG-ERFMG'
                                  itab-ERFMG.
    perform bdc_field       using 'MSEG-EXBWR'
                                  itab-EXBWR.
endloop. "itab
endform. "Map_Rec
**      Form BDC_DYNPRO
form bdc_dynpro using program dynpro.
clear w_bdcdata.
w_bdcdata-program = program.
w_bdcdata-dynpro   = dynpro.
w_bdcdata-dynbegin = 'X'.
append w_bdcdata to t_bdcdata.
endform.                    "bdc_dynpro
**      Form BDC_FIELD
form bdc_field using fnam fval.
if fval <> space.
    clear w_bdcdata.
    w_bdcdata-fnam = fnam.
    w_bdcdata-fval = fval.
    append w_bdcdata to t_bdcdata.
else.
    clear w_bdcdata.
    w_bdcdata-fnam = fnam.
    w_bdcdata-fval = fval.
    append w_bdcdata to t_bdcdata.
endif.
endform.                    "bdc_field
*       FORM buildcatalog                                             *
form buildcatalog.
clear wa_fcat.
clear it_fieldcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'PLANT'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'PLANT'.
wa_fcat-key          = 'X'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'STATUS'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'STATUS'.
wa_fcat-outputlen = '10'.
append wa_fcat to it_fieldcat.
clear wa_fcat.
colcnt = colcnt + 1.
wa_fcat-col_pos      = colcnt.
wa_fcat-fieldname    = 'MESSAGE'.
wa_fcat-tabname      = it_messtab.
wa_fcat-seltext_l    = 'Message'.
wa_fcat-outputlen = '90'.
append wa_fcat to it_fieldcat.
endform.                    "buildcatalog
*       FORM display                                                  *
form display.
l_title = text-002.
l_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = l_repid
      i_grid_title       = l_title
      it_fieldcat        = it_fieldcat
      it_events          = i_events[]
    TABLES
      t_outtab           = it_messtab
    EXCEPTIONS
      program_error      = 1
      others             = 2.
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    "display
Regards,
Amit

How to display more than one documents on windows 8 desktop?

how to display more than one documents on windows 8 desktop?

Adobe Reader Touch doesn't show more than one file on screen and doesn't show them on the desktop. Apparently these are very old fashioned things that Microsoft doesn't think we'll want to do any more and calls them "legacy" to make them sound antiquated.
If you want to do these things use the legacy Adobe Reader, a much more powerful and flexible app (and not obsolete in the slightest). http://get.adobe.com/reader . There are no legacy apps in the Windows App Store.

How to share more than one Time Machine folder

Hi,
With Snow Leo Server I found how to find how to share more than one Time Machine Folder but I can't see how to do the same with Lion Server, could you help me with that ?
The goal of that is to offer one TM folder per user which is located on a dedicated partition in order to limit the size of TM backups per user (150Gig).
In Lion, in can only share one TM folder for everybody and I didn'tfind if I can set a limit size per user...
Thank you in advance,

I have figured out a way to enable multiple backup targets.
However, it's one of these things I wouldn't want to describe to anyone except true programmer types, because everyone else has a 90%+ chance of messing up their system if they do something wrong.
It involves turning off file sharing, and then editing the plist files in /private/var/db/dslocal/nodes/Default/sharepoints/
The gist of it is this:
a) first create all the share points you later want to use for TimeMachine, and set them up for afp-only file sharing, also create one TM target, which you can either use later, or have there so the system has one entry it knows how to handle. I just made a bogus one that I'm not actively using.
b) turn off file sharing in Server.app
c) turn off TimeMachine in Server.app
d) now you can edit the files, the easiest is with Xcode, so you may want to install that first
e) for each sharpoint you made in a) there will be a corresponding .plist file in the location indicated, these are the files that need to be edited.
f) for each of these files
     1) the item0 string property in the timeMachineBackup array must be switched from 0 to 1
     2) a new key of type array with the name timeMachineBackupUUID must be created
     3) in the newly created array an item of type string must be placed with the value of a UUID, which can be created with the shell command uuidgen
g) make sure all the edited plist files are saved
h) turn on TimeMachine in the Server.app again
If all went well, you now should be able to go to one of your networked client computers and see all the time machine share points just created as options for being a time machine target.
Anyway, if you go that route: be careful, don't blame me if you muck things up...

How to transfer a xml file?

Dear friends,
I have a question about how to transfer a xml file between server and client using axis or weblogic.
My application needs to send xml files instead of primitive data types and bean objects.
Is it possible to tranfer files between server and client?
thank you very much for your great help!
jayanandan.

hi,
There are two ways in which u can send an xml file.
1) U send it along with the body of the soap message.
2)u can send it as an attachment in the soap envelope. this method u can use for any type of files.
If u send it in soap body the it will take more time for the processing of the soap body.so attachment is the best way.
I case of any queries please feel free to post it in the forum
Regards
Sandy

How to display more than one column with for each

Hi guys,
how to display more than one column with for each like below?
for each
Item1
Item2
Item3
Item4
Item5
Item6
Item7
Item8
Item9
Item10
End for each
for each
Item1     Item2     Item3
Item4     Item5     Item6
Item7     Item8     Item9
Item10
End for each

Take a look at this to see if the solution provided would work for you: https://blogs.oracle.com/xmlpublisher/entry/multi_column_row_woes
Won't you have more than 10 records in your data file ? If you are going to have only 10 items then you may be able to use position() function to limit it to 3 each..
Take a look at this: https://blogs.oracle.com/xmlpublisher/entry/turning_rows_into_columns
Thanks,
Bipuser

Mac filtering Netgear CG3100D how to set more than 1 filter

It a previous post the solution given to GMT issue was to set 2 filters, can someone please explain how to create more than 1 filter? My setting seems pretty rigid that there is only 1 filter.Kindly point me to the right direction please, thanks.

Hi silvelining,
There is a help file appears to the right side of the modem screen and should assist with adjusting the settings.
The following links are some of the FAQs from the Netgear site which you might find helpful.
http://kb.netgear.com/app/answers/detail/a_id/13112/~/how-to-configure-access-control-or-mac-filtering-%28smart-wizard-routers%29
http://kb.netgear.com/app/answers/detail/a_id/20483/~/set-up-a-netgear-router-to-block-access-to-certain-websites
- Shelly

How to Transfer vids to Phone without Bluetooth or...

How to Transfer vids to Phone without Bluetooth or Connector?? Don't tell me to go buy a connector and don't ask me why not. I just want to know how to do it without those two.

SabinM wrote:
Vids, i suppose you mean videos....anyway, there is a way to copy files (menu->applications->home media) from pc through wifi connection by sharing your media files from your computer on the network and sharing center (Win Vista). If you want to transfer files that are not media (mp3,mp4 etc.) like .sis files then you need to change the extension in a media one (xxxx.sis.mp3) and after copying it, delete that extension you placed in the end of the file.
What i would want to know is if there's a way to copy files from the phone to PC via wifi ... !? like making your phone a workgroup computer in the network.
You didn't write what phone you have but you can set up a VPN connection for Intranet on some devices. It's not a simple task though.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to start more than one program automatically? [RT]

Normally you can build an application and let it start automatically on the PXI system. You have to put the file into c:\ni-rt\startup\
But how to start more than one application in a pre-defined sequence? Depending on the situation there are several programs to be started that run simultaneously.
I searched for help in the Development Library and the Forums but I didn't find an answer.
Thank you very much for your helpin advance! Have a nice day!
Christoph

Hi Christoph,
You can use VI Server on the real-time target to launch other VIs dynamically. Your startup executable could be a simple application that uses VI Server to start other VIs that run in parallel in a pre-defined sequence.
Here's an example that does something similiar.
Note that when you build the VI into an application, you must include all the VIs that are called by VI Server as dynamic VIs in the application builder.
-Gerardo

How to export more than 5000 SharePoint items to excel?

Need a solution on how to export more than 5000 share point items to excel file.

Hello Chitra,
Option
suggested by soni is valid you can increase threshold limit through CA as well
as you can disable list threshold using PowerShell.
$web =Get-SPWeb
"URL"
$list =$web.Lists[“BIG_LIST_NAME”]
$list.EnableThrottling= $false
But disabling threshold cause performance issue, so as per best practices manage threshold limit according to your requirements
from CA.

How to transfer more than 1 file usong bluetooth t...

Similar Messages

Maybe you are looking for