How to transfer PSE catalog to Bridge

I recently switched from a pc to a mac. How do I transfer my extensive PSE catalog to Bridge, which is included with the new PSE 6 for the mac?
Carol

This might be a question for one of the Elements forums, Carol.

Similar Messages

  • How to transfer pse 5 to new computer

    Hi,
    Sorry if my question is very basic, but I honestly don't have much of a clue about how to do this properly.
    I have PSE 5 and just went from one computer (XP) to Windows 7.  I put all my files on an external hard drive and the PSE is in a folder on that drive.
    I don't know where to go from there-which file do I install or can I just transfer the whole file over to my desktop?  Will that work? 
    Do I need to download the patch for PSE 5 to have it work in Windows 7?
    Thank you so much for helping!

    That is what I did..copied the folder.  I bought the
    program as a download on the Adobe site and don't have a CD for it-I do have my serial number.  Since I live overseas I could only
    order it online at the time.
    So do I just launch the installer that is in the folder?  What happens to all the other files?
    I really apologize for my lack of knowledge in this-this whole transferring to a new computer is beyond my understanding right now.
    Thanks!

  • How to transfer pse 11

    I bought a new computer and I would like to transfer pse11 to new computer, it was a download.  I have pics already tranferred over.

    install pse 11 on your new computer, do not transfer it.
    if you need the installation file and if you follow all 7 steps (especially steps 1,2 and 3), you can download here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    and activate with your serial number.
    if you have a problem (error message, unavailable page or you are offered a current adobe version), you did NOT follow the directions.
    the most common problem is failing to meticulously follow directions 1,2 and/or 3 which are needed to add an adobe.com cookie to your computer that allows you to download directly without using the akamai download manager.
    again, follow the directions and you'll have no problem.

  • How to transfer PSE 12 from old computer to new computer

    I have a new subscription PSE 12 (Dec 2013) on my old computer which was too old and slow to operate PSE 12. 
    I bought a new computer and now would like to move my existing subscription of PSE 12  to my new computer,  I have the SN and order numbers.
    Should I just sign up for a free trial and add the SN number whet the trial expires?

    Should I just sign up for a free trial and add the SN number whet the trial expires?
    Yes, that's the way to do it.
    No need to wait until the trial expires. Adobe allows up to 30 days of free use. You can enter your serial number immediately, since you've already bought it.

  • How to transfer Address Book to new computer?

    There is a knowledge base article on how to transfer the catalog to a new computer, but the procedure does not transfer the address Book.
    Can somebody tell me where is the contacts file located and how to transfer it?
    Thanks

    Assuming youre using PSE 6 on both computers, you can copy the file contacts.xml from the old to the new computer. See this tech note for the location:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402712&sliceId=1

  • How to use the catalog in our own Web Dynpro program?

    Hi Expert,
    How to access MDM catalog and bring the product data back to a our own Web Dynpro program?

    Hi  Masa,
    The Catalog Search UI of SRM that is referred to as UI as aforementioned is a page which is capable of the selection of catalog items is linked from the shopping cart creation.
    Our biz requirement content two scenarioes to processing the purchase requirement.
    A.  Create shopping cart via the catalog (PR) --> SRM PO Process --> SUS(PO and Invoice) 
    This is the standard SRM purchase scenario and we have already implemented that.
    B. Create a requirement document via the catalog (This document is same with the SC but very simple, and we create this function by the own web dynpro program) --> transfer the requirement document to other purchasing system(none SAP)  in our intranet.
    So the key problems we faced are below:
    1. How to connect to the catalog search UI from our own web dynpro program.
    ( If we connect the catalog via the MDM ABAP API, that will make the catalog serach UI could not be used;
    Also  it has been failed to simulate the function of SC's connection to the catalog;
    So we decide to link the catalog serach UI via the URL, the linkage is "http://<J2EEserver:J2EEport>/SRM-MDM/SRM_MDM?sap-locale=EN&HOOK_URL=&mask=&namedSearch=General&username=&password=&catalog=<Repository Name>&server=&datalanguage=EN". )
    2. How to transfer the catalog item data to our own web dynpro program.
    If we link the catalog search UI by URL, we can not find any good method to transfer the catalog item data to our own program.

  • I'm moving an internal hard drive from an old computer to a new computer.  How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

    I'm moving an internal hard drive from an old computer to a new computer.  (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?  Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

    The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
    The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
    The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
    It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
    If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
    Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

  • How to Transfer Catalogue from PSE 3 to 8 or 11

    How do you transfer a PSE 3 catalogue form an XP computer to PSE 8 or 11 on a new 7-64bit computer. I have not installed PSE 8 or 11 on the new computer yet. I need to have the PSE 3 catalogue transfered complete with groups and collections to the new computer. Should I install PSE 3 on the new computer then transfer or should I install PSE 8 or 11. I'm told that you can't transfer PSE 3 to PSE 11, but will PSE 8 work? What is the best procedure to do all of this?

    Is there any reason to also save the original jpg image files in a separate location, like an external hard drive?  Or does the software basically do that when you restore?
    In my opinion, after the restore is successful, and you now have a PSE11 catalog on the new computer, you want to make a backup of that (in PSE11, File->Backup Catalog) to an EHD, and save it for emergencies. Once that is successful, you could, if you want to, get rid of the old PSE3 backup.
    Since the backup created this way contains both the photo files and catalog files, there is no need to specifically save or backup the original photo files via another operation.

  • How do I transfer the catalog in LR4 (macbook pro) to LR 5 on a iMac?

    How do I transfer the catalog in LR4 (macbook pro) to LR 5 on a iMac?

    http://www.lightroomqueen.com/2009/02/28/how-do-i-move-lightroom-to-a-new-computer/

  • How to transfer Lightroom settings  from one catalog to another?

    Lightroom 5. I have combined two catalogs into one "Master Catalog" per Julian Kosts tutorial ( http://tv.adobe.com/watch/adobe-evangelists-julieanne-kost/lr3-merging-individual-lightroo m-catalogs-into-a-master-catalog-/ ) without incident. However, my presets are not to be found. Could there be other issues? How Do I properly get these presets into my Master Catalog?
    How to transfer Lightroom settings  from one catalog to another?

    Nevermind.
    Per the turorials, this is suppose to occur automatically.
    In the rare event that it does not, forced by lack of support through Adobe or the forums, I am relagated to resolve my problem the old fasjion way. Guessing at a solution of dragging and dropping (risking overwritting current the newer LR5 files (careful now).
    I love the product but trying to get problem resolution here has been disapointing.
    I'd like to retract this entire question session.

  • How do you create a pdf catalog in bridge?

    How do you create a pdf catalog in bridge?

    Bridge is not a robust DAM (Digital Asset Manager), just a file browser.  It started out as nothing more than Photoshop's File Browser.
    Before anything else, would you please you are talking about a PDF Catalog of your images?

  • How do I transfer PSE 7 to my new computer?

    I wish to transfer PSE 7 to my new computer.  I no longer have the activation code. How can I accomplish this?

    If you have registered your software then please see http://forums.adobe.com/message/3987968#3987968?promoid=KBHJW for information on how to locate your serial number.  You will also need access to the installation files to install on your new computer.

  • How to Transfer Colletions from Bridge CS5 to Bridge CS6?

    How to Transfer collections from Bridge in CS5 to CS6?  I tried to copy my collections to the new Bridge but for some reason I do not see an option.  I tried putting on Keywords on my collections so that I can pull them up again but for some reason it won't write keywords anymore?  What is the best approach to transfer collections.  Thanks.  KC

    What is the best approach to transfer collections.  Thanks.  KC
    On a Mac both the keyword file and collections are stored in the user library (by default hidden in OSX lion) in the user account.
    The path on Mac:
    user / library / Application Support / Adobe. Inhere you should see both Bridge CS5 and bridge CS6 if you have upgraded while the older system is still on your system.
    In Bridge CS5 you see several folders and files. The keyword file that has all your in CS5 created keywords is called 'Adobe Bridge Keywords.xml' and the folder called Collections should have all your saved collections in it.
    You can copy the keyword file to the same location in CS6 and also the content of the collections folder can be copied to the CS6 folder.
    After restarting Bridge CS6 they should reflect the correct collections and keywords.
    Don't know the path on Windows but it might be similar.

  • How do I transfer my catalog, files and collections into Lightroom 4 onto another computer?

    How do I transfer my catalog, files and collections into Lightroom 4 onto another computer?

    You can copy your image file  from you PC to your Mac over your home network or via DVD/CD.  You can not install you PC CS5.1 version on you Mac. Its not compatible with MAC OS.  You would need a MAC version of CS5.1 and Mac version serial number to activate it.  Adobe no longer markets CS5 so you most likely will not be able to pay for a platform switch media install.

  • How to transfer Capture One catalog to Lightroom

    Does anyone know how to transfer the "starred" or marked images to lightroom, to then continue editing?
    Thanks

    Use Backup, Restore to move catalog | Organizer | Elements 6 or later

Maybe you are looking for

  • Passing integer value in prompt

    Hi Everyone, I am trying to pass a smallint datatype value (ex: 2000) from a page prompt to a filter. When I try to view the result, I am getting an error; Error getting drill information: SELECT C1, C2, FROM SH WHERE C1 = variable1 Odbc driver retur

  • Standard cost audit report in SAP BI

    Dear Gurus We need a Cost audit report (module: CO) (detail required as per CAS  and rules) in BI, kindly suggest if there is a standard report for the same,if not then kindly suggest how to go about it. Is there a standard report for the same in ECC

  • How to determine the exact database error in JPA?

    For example you are going to add a record in the database which primary already exist in one of the records in that table in the database. This will cause an error, but how do I know this error in human readable form just like "Same record with the s

  • Servlet Hot-Deploy with a WebApp

    Hi everybody, Does anybody know something about hot deployment of servlets in a web application (.war) ? I tried many things (setting reloadCheckSecs in properties, in web.xml, hot-deploy from console...) but nothing really worked. So I have to regis

  • Trying to stop MYSQL service without success in snow leopard server

    Hello I trying to enabled MySQL service on snow leopard server. My hard drive name is "Macintosh HD2". I receive this message : Can't change dir to '/Volumes/Macintosh HD2/ServiceData/MySQL/' (Errcode: 2) I try to stop without success MySQL service f