How to transfer select options variable

Hello:
I can pass parameter to parameter id such as p_fikrs, but how to transfer select options parameter to parameter id such s_fictr.
SET PARAMETER ID 'FIK' FIELD p_fikrs.
SET PARAMETER ID 'FIS' FIELD s_fictr.
SET PARAMETER ID 'FPS' FIELD s_fipex.
SET PARAMETER ID 'GJR' FIELD p_year.
CALL TRANSACTION 'FMRP_RFFMEP1BX' AND SKIP FIRST SCREEN.
Thank you very much!

Use SUBMIT with the following option
SUBMIT... USING SELECTION-SCREEN scr
Effect
When you execute the report, the system uses the selection screen number that you specify in the scr field. This must be a selection screen defined using the SELECT-OPTIONS, PARAMETERS and SELECTION-SCREEN statements.If you omit the addition, the system uses the standard selection screen 1000.
This addition allows you to start the same report in different situations, using a different selection screen each time.
Notes
The addition VIA SELECTION SCREEN determines whether the report is processed in the foreground or the background.
What happens if the required screen does not exist or is not a selection screen?
Screen 1000:
If you want to use the standard selection screen (... USING SELECTION-SCREEN 1000 or do not specify a ... USING SELECTION-SCREEN) addition, the system does not process a selection screen.
Other selection screens:
The system triggers a runtime error.
Hope dis helps,
Reward if it does

Similar Messages

How to pass select-options variable to a form.

I have a select-options variable smatnr. I need to pass this select-options variable to a form by
perform using smatnr changing svar.
form cond_types using pmatnr changing svar.
IT gives an error saying imcompatible types been passed between smatnr and pmatnr.
Any ideas, what is wrong. How do I pass a select-option variable into a form the right way.
Thanks
Ram

Try like this:
TABLES: vbak.
SELECT-OPTIONS: s_vbeln FOR vbak-vbeln.
START-OF-SELECTION.
PERFORM get_data USING s_vbeln[].
*& Form get_Data
FORM get_data USING p_s_vbeln LIKE s_vbeln[].
ENDFORM. " get_Data
Regards,
Naimesh Patel

How to pass select-option variable in function

hi ,
select-option : s_akont for KNB1-akont OBLIGATORY.
i have to pass s_akont in function without using
s_akont-low & s_akont-high.
rightnow i am passing like s_akont but it is giving me a error :
s_akont is followed by niether by an internal table nor by a value list.
what should i write.
regards
raj

Hello Raj
I assume that you want to import your select-options into your function module(s). Since select-options are, by default, itabs with header lines you have to pass your select-options as following:
CALL FUNCTION 'Z_...'
TABLES
it_selopt = s_akont[].
The TABLES parameter it_selopt could be of type ANY or better of type TABLE.
If you want to use generic select-option structure you can use RSDSSELOPT and the table type TT_RSDSSELOPT. In this case you would need to copy your select-options from s_akont to a generic type s_generic (of type RSDSSELOPT).
Regards
Uwe

How to assign list of default value for select-option variable???

Hi every one
This is Deepak,
I want to know how to assign list of default value to select-option variable ? please any body tel me solution
for example
select-option matnr for mara-matnr default ..............and here i want to give more than 1 values that will be default value and use can choose any one at the time of input .
Thank you in advance
Deepak

Hi.
Check the following sample code.
REPORT ztn_test.
" It is example for list populating.
TABLES:knvp.
data: BEGIN OF itab OCCURS 10,
kunnr like knvp-kunnr,
END OF itab.
data: wa_itab like itab.
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: s_kunnr(20) type c as LISTBOX VISIBLE LENGTH 40 .
AT SELECTION-SCREEN OUTPUT.
SELECT kunnr from knvp into CORRESPONDING FIELDS OF TABLE itab WHERE parvw = 'SP'. " SP for ur requirement
" I have used loop to populate some values from table
loop at itab into wa_itab.
name = 'S_KUNNR'.
value-key = sy-tabix.
value-text = wa_itab-kunnr.
append value to list.
clear wa_itab.
endloop.
" If u want individaully assign the values change the code as
name = 'S_KUNNR'." Select option name
value-key = 1." Index
value-text = 'VAL1'.
append value to list.
name = 'S_KUNNR'." Select option name
value-key = 2." Index
value-text = 'VAL2'.
append value to list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING id = name
values = list.
Edited by: tahir naqqash on Feb 21, 2009 4:38 PM

Result of the query is not filtered as value given in Select Option variabl

Hello ,
A Select option Variable is created on Navigational Attribute( ZINV_PROG) of 0WBS_ELEMT.
The Compound Key for object ZINV_PROG(Investment program) is APPR_YEAR( Approval Year)
This ZINV_PROG object does not bear Master data.
The values in the field get populated as you load Master data of 0WBS_ELEMT.
The values for this objects is as shown below:
APPR_YEAR ZINVPROG
2005 ESCCCAPS
2007 ESCCCAPS
2008 FIRE
2006 CAPITAL
A select option variable is craeted on this Navigational attribute.
When you execute the query , On the selection screen of the query..
If you provide i/p for Investment programm field as 2007 ESCCCAPS, the data should ideally be filtered for this values only.
But the result of the query shows data for both values 2005 ESCCCAPS and as well as for 2007ESCCCAPS.
Let me know how to sort this issue.
Points will be assigned for the correct and helpfull answere.
Thanks,

Thanks Srini for your prompt explanation.
My Question is if Approval year is a compounded key of ZINV_PROG object why data would not get filter out directly.
I mean on the screen for this particualr variable i take help - F4 to see values there you are able to see all the values of Investment programm along with the apprroval year.
If i select value as 2005 ESCCCAPS from the help F4 screen then ideally data should be fileterd out for this particular value. But it is not happening so.
Is that so in Query desgining that if you creating a variable on Nav Attribute, and that particular Nav attribute has a compound key then if you want to filter out the data for this Nav attribute correctly you would also require to create a variable for Compound key also.
Please let me know
Thanks

Select-option variable length

hi experts,
i am using select-options in my report prg.
i want to make its display length more than 8 characters since select-option variable can be upto 8 characters long.
how can i achieve this?
thanx in advance...
Thanx & Regards,
Viral Patel

For technical limits on SELECT-OPTIONS read SAP documentation ([SELECT-OPTIONS|http://help.sap.com/abapdocu_70/en/ABAPSELECT-OPTIONS.htm])
The name of the selection criterion selcrit is limited to a maximum of 8 characters. This statement is allowed in the global declaration part of executable programs, function groups, and module-pools. In function groups and module-pools it is only allowed within the definition of an independent selection screen. In executable programs it is otherwise automatically assigned to the standard selection screen.
and
Two input fields with the name selcrit-low and selcrit-high are created on the current selection screen using a matching external data type in a new line at positions 35 and 60. The length of the input fields bases upon the length of the data type which is defined after FOR. The maximum length of the input fields is 45. The maximum visible length of the input fields is, depending on the nesting depth, in blocks with frames between 10 and 18. If the length is larger than the maximum visible length, then the content is scrollable.
So if your field (the field after the FOR option) is less than 8 character the visible length will be less than 8, you may use another field with 8 character, but you will have to map it to the correct field length (in AT SELECTION-SCREEN ON so, fill a TYPE RANGE internal table that you will use in following statements) you may also need to manage the search-help in your code (may work without problem if no conversion exit and character type field, else manage the AT SELECTION-SCREEN ON VALUE-REQUEST)
Regards,
Raymond

Error while using selection option variable in the selection screen

Hi All,
I am facing an issue while using selection option variable in the selection screen for one of my reports.
Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the selection screen for the field Region From then the query should be executed only for those "Region From" values which begin from "BE".
Approach: For the above requirement I have made a selection option variable for "Region From". This allows use wild card
But when the report is executed we get the following error:
"System error in program CL_RSR_REQUEST. Invalid filter on ETVRGNFR".
(ETVRGNFR is technical name of the info object Region From)
Though the report is executed it displays all the values for the field "Region From" irrespective of the selection given in the selection screen.
Please give suggestions / alternate solutions to crack this issue.
Thanks in advance
Regards
Priyanka.

Hi,
Try to use a variable of type Customer Exit and do the validation inside the exit to display according to your request.
This is just my view, i am not sure if u are already using this or Char. Variable.
Cheers.
Ranga.

How to create select-options in module pool program

Hi
i am structed at this point could you please tell me
how to create select-options in module pool program

Steps to get SELECT-OPTIONS in module pool programs.
<li>. Start one dialog program with SAPZ_TEST.
<li>. Place the below code in the TOP include of the dialog program.
PROGRAM SAPMZ_TEST.
TABLES mara.
SELECTION-SCREEN BEGIN OF SCREEN 2100 AS SUBSCREEN.
SELECT-OPTIONS: matnr FOR mara-matnr.
SELECTION-SCREEN END OF SCREEN 2100.
<li>. Create one screen 2000 .
<li>. Go to Layout of the screen and Define subscreen area on the screen and Name it as g_subscreen.
<li>. Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN g_subscreen INCLUDING 'SAPMZ_TEST' '2100'.
PROCESS AFTER INPUT.
CALL SUBSCREEN g_subscreen.
<li>. Activate all.
<li>. Create Transaction code for the dialog program SAPZ_TEST.
<li>. Execute the transaction code. You will see the select-option like we see on Selection-screen.
I hope that it gets u clear idea.
Thanks
Venkat.O

How to make Select Options Mandatory?

Hi Guys,
              Can anybnody tell me how to Declare Selection Options for some of them mandatory.
Select-Options : v_PurOrg for EKKO-EKORG default '2000',
                         v_GRDate for Sy-Datum ,
                         v_GRPrd for MSEG-GJAHR.
         In these i have to make v_PurOrg Manadatory.
Thanks,
Gopi.

Hi Gopi,
In order to make select-options mandatory we add OBLIGATORY in the statement like the below.
Selection-Screen.
Select-Options : v_PurOrg for EKKO-EKORG default '2000' OBLIGATORY.
In this case, only the first option will have the default value of 2000.But if you want both the options low and high of select-options, means you have to add the below code in your program in the initialization event.
Initialization.
v_PurOrg-low    =   1000.
v_PurOrg-high    =   2000.
append v_PurOrg.
Hope this helps.
Please reward if useful.
Thanks,
Srinivasa

How to creat select-option on module pool screen???

Hi All,
please tell me how to creat select-option on module pool screen???
Regards
Deepak

Hi Deepak Kumar Sharma,
There are Two ways to achieve it...
1) How to create a select-options in a module pool screen.
Method 1
a) Create a subscreen area in your screen layout where you want to create the select options.
b) In the top include of your module pool program declare a selection screen as a subscreen e.g.
SELECTION-SCREEN BEGIN OF SCREEN 100 AS SUBSCREEN.
select-options s_matnr for mara-matnr.
SELECTION-SCREEN END OF SCREEN.
c) In the PBO and PAI of the main screen where the select options needs to be created do a call subscreen of the above screen (100).
CALL SUBCREEN sub_area INCLUDING <program> <screen>
This call subscreen statement is necessary for transport of values between screen and program.
Note: All validations of the selection screen fields e.g. the s_matnr field created above should be done in selection screen events like AT SELECTION-SCREEN etc and not in PAI. These selection screen validations etc should be done in the top include only.
Method 2
a) Create 2 separate fields in your screen layout - one for the low value and one for the high value. Insert an icon beside the high value which will call the multiple selections popup screen on user command. Use function module COMPLEX_SELECTIONS_DIALOG to achieve this.
struc_tab_and_field-fieldname = con_cust. " 'KUNNR'
struc_tab_and_field-tablename = con_kna1. " 'KNA1'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
EXPORTING
TITLE = ' '
text = g_titl1 " 'Customers'
tab_and_field = struc_tab_and_field
TABLES
RANGE = rng_kunnr
EXCEPTIONS
NO_RANGE_TAB = 1
CANCELLED = 2
INTERNAL_ERROR = 3
INVALID_FIELDNAME = 4
OTHERS = 5.
IF NOT rng_kunnr[] IS INITIAL.
Read the very first entry of the range table and pass it to
dynpro screen field
READ TABLE rng_kunnr INDEX 1.
IF sy-subrc = 0.
g_cust = rng_kunnr-low.
ENDIF.
You can use the return table rng_kunnr to populate your own internal range table with the values entered by the user. Basically here you are just simulating the work of a select-options parameter by module pool screen elements.
Also have a look on below threads
how to make select option in module pool
select option in module pool program
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7

How to pass select-option filed to Function Module Exporting Parameter

Hi,
    How to pass select-option filed to Function Module Exporting Parameter.
Thanks

Hi,
DATA: BEGIN OF ITAB5_WRK OCCURS 0,
        KUNNR     TYPE KNKK-KUNNR, "CUSTOMER #
        SBGRP     TYPE KNKK-SBGRP, "CREDIT REP
        KLIMK     TYPE KNKK-KLIMK, "CREDIT LIMIT
        NAME1     TYPE KNA1-NAME1, "CUSTOMER NAME
        SKFOR     TYPE KNKK-SKFOR, "TOTAL A/R
        AMT1      TYPE KNKK-SKFOR, "CURRENT
        AMT2      TYPE KNKK-SKFOR,                          "01-30
        AMT3      TYPE KNKK-SKFOR,                          "31-60
        AMT4      TYPE KNKK-SKFOR,                          "61-90
        AMT5      TYPE KNKK-SKFOR,                          "91-120
        AMT6      TYPE KNKK-SKFOR,                          "OVR 120
        BZIRK     TYPE KNVV-BZIRK,
      END OF ITAB5_WRK.
SELECT-OPTIONS P_COMP     FOR T001-BUKRS
SELECT KUNNR SBGRP FROM KNKK
         INTO TABLE ITAB5_WRK
         WHERE SBGRP IN P_REP
           AND KUNNR GE '0001000000'
           AND SKFOR NE 0.
LOOP AT ITAB5_WRK.
    DELETE ADJACENT DUPLICATES FROM ITAB5_WRK COMPARING KUNNR.
ENDLOOP.
PERFORM GET_CREDIT_LIMITS.
*=======================================================================
IF P_DIST NE SPACE.
    LOOP AT ITAB5_WRK.
      SELECT SINGLE * FROM KNVV WHERE KUNNR EQ ITAB5_WRK-KUNNR
                                  AND VKORG EQ P_COMP
                                  AND VTWEG EQ '20'
                                  AND SPART EQ '10'
                                  AND BZIRK IN P_DIST.
      IF SY-SUBRC EQ 0.
        MOVE KNVV-BZIRK TO ITAB5_WRK-BZIRK.
        MODIFY ITAB5_WRK.
      ELSE.
        DELETE ITAB5_WRK.
      ENDIF.
    ENDLOOP.
ENDIF.
*==============================================================
LOOP AT ITAB5_WRK.
    MOVE: 'F/S'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    PERFORM AGING.
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MOVE: 'SPEC'            TO WRK-KKBER,
           ITAB5_WRK-KUNNR TO WRK-KUNNR.
    *PERFORM AGING.*
    ADD: W_SNFAE TO ITAB5_WRK-AMT1,
         W_SFAE1 TO ITAB5_WRK-AMT2,
         W_SFAE2 TO ITAB5_WRK-AMT3,
         W_SFAE3 TO ITAB5_WRK-AMT4,
         W_SFAE4 TO ITAB5_WRK-AMT5,
         W_SFAE5 TO ITAB5_WRK-AMT6,
         W_SFAEL TO ITAB5_WRK-SKFOR,
         W_SNFAE TO ITAB5_WRK-SKFOR.
    MODIFY ITAB5_WRK.
ENDLOOP.
FORM AGING.
*CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'*
EXPORTING
      BUKRS             = P_COMP
      KKBER             = WRK-KKBER
      KUNNR             = WRK-KUNNR
      RASID             = 'FEND'
      KLIMP             = 'X'
    IMPORTING
      SFAE1             = W_SFAE1
      SFAE2             = W_SFAE2
      SFAE3             = W_SFAE3
      SFAE4             = W_SFAE4
      SFAE5             = W_SFAE5
      SFAE6             = W_SFAE6
      SFAEL             = W_SFAEL
      SNFA1             = W_SNFA1
      SNFA2             = W_SNFA2
      SNFA3             = W_SNFA3
      SNFA4             = W_SNFA4
      SNFA5             = W_SNFA5
      SNFA6             = W_SNFA6
      SNFAE             = W_SNFAE
    EXCEPTIONS
      NO-AGING_SCHEDULE = 1
      NO_TABLE_INPUT    = 2.
CASE SY-SUBRC.
    WHEN 1.
      MESSAGE E999 WITH 'PLEASE ENTER AGING SCHEDULE'.
    WHEN 2.
      MESSAGE E999 WITH 'DO NOTHING ??'.
ENDCASE.
ENDFORM.                    "AGING
Thanks

How to provide select-option in module pool programming

Hi all,
How to provide select-option in module pool programming.
If any body knows let me immediately.
Thanks
sudheer

Hi Sudheer,
Unfortunately there is no standard way of having a select-option in a module pool program.
What you can try is having two fields and creating a range in your program and populating the range at runtime with respective value and trying to simulate some functionality of the select-option.
Hope it helps.
Thanks, Debasish

How to use select options whitout ranges ie like parameter

how to use select options whitout ranges ie like parameter and pls send me the code on that
thanks
raja.

hi,
SELECT-OPTIONS : s_kunnr for kna1-kunnr no intervels.
eg: code
SELECT-OPTIONS : s_kunnr for kna1-kunnr no intervels.
data: itab type table of kna1 with header line.
select * from kna1 into table itab where kunnr IN s_kunnr.
rgds
Anver

HOW TO PASS SELECT-OPTIONS AS IMPORT PARAMETER TO A CLASS

Hi experts,how to pass select options value as a export parameters to a zclass.
can give me some idea.
Thanks
sai

As Sachin already said, selection options are stored in an internal table. You can reconstruct the table type without the corresponding input fields using the type addition RANGE OF.
So - assuming you have the following in your program:
DATA: wa TYPE sflight.
SELECT-OPTIONS so_car FOR sflight-carrid.
you can create a publically-visible type in your class using direct type entry and the code
TYPES: my_selectoption TYPE RANGE OF sflight-carrid.
and use this to define the importing parameter of the method.
The only other thing you have to remember is that select-options generates an internal table with header line. Thereore, to pass the table to the method, you would use (in the above example) so_car[], and not just the name of the select-option.
Hope this helps.
Regards
Jon.

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

How to transfer select options variable

Similar Messages

Maybe you are looking for