How To Transfer the master data from R/3 to APO System

hi this is mohamed .i m new to APO..
can any one guide me the configuration for transferring the master datas to APO system.i m using scm 4.0 version..
Thanks in advance
Regards
Mohamed.

Welcome to SDN.
refer this link
creating integration model
Give ur mail id i will send the document which i have.
With regards.
Maya.

Similar Messages

How to upload the master data from legacy to SAP

Hi Frends,
how to upload the master data from legacy system to SAP System once the configuration is over.how to carry forward the open items of vendors and customers while uploading.who will upload functional consultantsor ABAPER.
please clarify me
Regards
Sap Guru

Hi ,
use LSMW or BDC for uploading Master & transaction data.
This work is done by the Respective Functional team.
Chandra

How to transfer Sales order data from R/3 to APO!!

Hi Techies,
I am in the process of moving some sales order data for a particular mat/loc combination in cfm1 after creating a integration model iam even activating even in R/3 but after doing this iam not able to view those sales orders in RRP3 t-code IN APO side.
Kindly let me know what is the procedure to transfer transactional data from R/3 to APO and to do enhancement in CIF which carries Transactional data .
Problem solving answers would be rewarded duly !!.
+PKP.

Hi PKP,
The field SPEC_STOCK has the description "Key for Special Stock Section" and is linked to schedule line of the PO. This seems to be something linked to special stock, but I am not very sure about the relevance of this field.
I do not see any related field when I check the order in RRP3 or in RRP2. In standard SAP, you would only be able to use the fields that are already visible in APO. Otherwise you need to add the field to the standard SAP t-code display (read the value from SOMEWHERE and then display it in RRP3. This is possible using Badi /SAPAPO/RRP_IO_COL). Then only you can see the values which you have populated.
If this field SPEC_STOCK already has some functionality (which it should have, though I am not sure what it is), you might not be able to use it for other purposes (since system does some validations for certain fields).
You are updating the value for this field in IT_OUTPUT internal table, you also need to add an X in the corresponding field in the internal table IT_OUTPUTX.
You could try putting this X, so that your changes are considered in CIF, but I am not sure what the impact may be, and you could get a dump also possibly. Even otherwise, since this field doesn't seem to be visible against a PO in APO, I am not sure if this would be helpful for you.
As far as I could see, I did not find any standard field which could be helpful for you.
May be if you open a fresh thread and ask for advice on how to send any custom comments for PO to APO, someone could provide some inputs.
Thanks - Pawan

How to get the complete data from Webdynpro using a RFC

hi guys,
A form is created in the webdynpro, when that pdf form is called the user have to provide the key field ie the employee number in the form and then when he press the 'go' button a rfc is called and it gives all the details of the employee in the form. Then the user have to input some fields in the form and he have press the submit button. My problem is here, when the user is going to press the submit button that form will be converted to a stream (binary) of data and it is sent to one of the import parameter used in the RFC.
I have created a RFC and created a import parameter of data type XSTRING, since i want to see what exactly R3 is receiving from web dynpro i am writing this contant in the sever as a text file. When i saw that text file i cant see the complete data.
And when i searched in R3 the capacity of xstring is 1024 CHAR, so i dont know how to capture the entire data from webdynpro into my R3.
I give the code what i worte please tell me am i missing anything in my code, or is there any data type which can hold more than 500kb of data which is coming from webdynpro.
FUNCTION ZSEND_MAIL_ATTACHMENT.
""Local Interface:
*" IMPORTING
*"     VALUE(OUT_PLACE_LEVEL) TYPE XSTRING OPTIONAL
*"     VALUE(BIN_DATA) TYPE INDX_CLUST OPTIONAL
*" TABLES
*"      IT_MESSAGE STRUCTURE SOLISTI1
Data Declaration
DATA: gd_cnt TYPE i,
      gd_sent_all(1) TYPE c,
      gd_error TYPE sy-subrc,
      tab_lines LIKE sy-tabix.
Structure Declaration
DATA : BEGIN OF it_file OCCURS 0,
          row(255),
         END OF it_file.
DATA : BEGIN OF i_split OCCURS 0,
row(50),
END OF i_split.
Internal Table Declaration
data : it_receivers like table of SOMLRECI1 with header line."occurs 0.
DATA : objbin LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE. "sOLIX
DATA : it_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE.
data : wa_receiver like table of SOMLRECI1 with header line.
data : it_receiver like table of SOMLRECI1 with header line.
data : v_bin_data like SOLISTI1 occurs 0 with header line.
DATA : gd_doc_data LIKE sodocchgi1 OCCURS 0 WITH HEADER LINE.
*data bin_data1 like table of solix with header line.
REFRESH : objbin, it_packing_list, it_receivers, wa_receiver.
CLEAR   : objbin, it_packing_list, wa_receiver, it_receivers.
DATA V_SUBJECT(255) VALUE 'HI'.
gd_doc_data-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( it_message ).
gd_doc_data-obj_langu = sy-langu.
gd_doc_data-obj_name = 'SENDFILE'.
gd_doc_data-obj_descr = v_subject.
gd_doc_data-sensitivty = 'O'.
APPEND GD_DOC_DATA.
Appending The Internal Table it_packing_list
it_packing_list-head_start = 1.
it_packing_list-head_num = 0.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'RAW'.
it_packing_list-body_num = tab_lines.
APPEND it_packing_list.
*CALL FUNCTION 'GUI_UPLOAD'
*EXPORTING
*filename = V_FILE_PATH
*filetype = 'BIN'
*TABLES
*data_tab = BIN_DATA.
move bin_data to v_bin_data.
append v_bin_data.
*move soli to bin_data.
LOOP AT V_BIN_DATA into objbin.
MOVE v_bin_data TO objbin-line.
    APPEND objbin.
ENDLOOP.
CLEAR it_packing_list.
DESCRIBE TABLE objbin LINES tab_lines.
it_packing_list-transf_bin = 'X'.
it_packing_list-head_start = 1.
it_packing_list-head_num = 1.
it_packing_list-body_start = 1.
it_packing_list-doc_type = 'PDF'.
it_packing_list-body_num = tab_lines.
it_packing_list-doc_size = tab_lines * 255.
APPEND it_packing_list.
data file(255) value '/tmp/bali.txt'.
*Appending The Internal Table it_receivers
close dataset '/tmp/bali.txt'.
open dataset '/tmp/bali.txt' for output in text mode encoding default.
if sy-subrc = 0.
loop at objbin.
transfer objbin to '/tmp/bali.txt'.
endloop.
else.
write 'hi'.
close dataset '/tmp/bali.txt'.
endif.
it_receiver-receiver = '[email protected]'.
it_receiver-rec_type = 'U'.
it_receiver-com_type = 'INT'.
APPEND wa_receiver.
move wa_receiver[] to it_receiver[].
append it_receiver.
*Move wa_receiver[] to it_receivers[].
Clear it_receivers.
if i_OUT_PLACE_LEVEL NE 0.
loop at it_receivers into wa_receiver.
   loop at it_receivers into wa_receiver.
**Function Module To Post The Message To Externa Mail
     CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
       EXPORTING
         document_data              = gd_doc_data
         put_in_outbox              = 'X'
         commit_work                = 'X'
       TABLES
         packing_list               = it_packing_list
         CONTENTS_TXT               = objbin
         receivers                  = it_receivers
       EXCEPTIONS
         too_many_receivers         = 1
         document_not_sent          = 2
         document_type_not_exist    = 3
         operation_no_authorization = 4
         parameter_error            = 5
         x_error                    = 6
         enqueue_error              = 7
         OTHERS                     = 8.
     clear wa_receiver.
ENDFUNCTION.

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
   put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

How to delete the Hierarchy data from Infoobjects.

How to delete the Hierarchy data from Infoobjects. In my case I had 300 records in the corresponding table of info object.
When i was trying to delete the hierarchy data, I am getting error message. "Some master data not deleted". Can any one tell me to delete all these records by using a program.

Hi
Go to SE11 and enter the hierarchy table name.
/BIC/H....(infoobject name)...and execute the table and select table entry and delete all....
Thanks
TG

Open hub Services - How to extract the master data related to a object ?

Hi Gurus,
I am implementing OpenHub services for our project, it's on BW 3.5, I have the list of required fields with which I am creating an InfoSpoke. Now I am stuck in some the info objects which are having master data associated with it.
Example : Business partner(BP) data, when I map the 0BP infobjects in infospoke it's extracting the BP ID (ex: CT065316,CT068638 etc) in flat file but I want the BP name, address & telephone number as well, which are coming from master data table. But I am able to map only 0BP infobjects as a part of ODS/Cube.
Can any one tell me how to get the master data extracted in the flat file with associated info object???
Answers will be highly appreciated.
Regards,
Kironmoy Banerjee
Edited by: Kironmoy Banerjee on Oct 1, 2009 3:34 PM

Hi Kironmay
Please follow the below mentioned procedure to create a transformation. This is applicable for BW 3.5 as well.
- Enter your infospoke in the edit mode.
- On the Transformation tab set the indicator for the Infospoke with Transformation with BADI so that the infospoke is activated.
- This will take you to the Addin implementation/BADI builder.
- Enter the short text/description for the implementation. The implementation name is always the same as the technical name of the infospoke
- The implementation of the BADI is always filter dependant.
- In the properties tab of the infospoke enter your infospoke under the Filter specifications.
If you do not specify an InfoSpoke under Filter Specifications, then this implementation is valid for all InfoSpokes. This means that this is called up for all InfoSpokes during the extraction.
- Activate your class
- From your interface tab page, double click on the Transofrm Method and you will arrive in the class builder page
- Here you can enter the code
- To do a look up of the master data you have to write a code similar to the one I've given below. This is just an example for looking up material master.
IF FLT_VAL = 'Your infospoke'.
T_DATA_IN[] = I_T_DATA_IN[].
Select zstd_cost from /bi0/pmaterial into table T_return
For all entries in T_DATA_IN
WHERE material = T_DATA_IN-material.
...Continue with your code.
Append output from T_return to your output E_T_DATA_OUT
- Activate your method. Return to the BAdI builder. Return to your InfoSpoke.
I hope this helps.
Thanks.

How to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?

how to transfer service ticket data from ECC6.0 to CRM 7.0 using LSMW?
Plz suggest me any BAPI or IDOC for that ..
thanks in Advance .

You have to convert your long string to a table of shorter strings.
There may be other ways, but one possibility is to use a loop to process you string.
while (there is something left)
put the next e.g. 1024 characters in a new row of your table
endwhile
If you need to reconstruct your string from the table, don't use simple concatenation since it will remove blanks at the end of lines. Believe me (from experience) sooner or later this will happen.
Instead you need to either set the subsections of your long string, or insert from the end of your table and keep shifting the contents (probably less efficient) right

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

My computer that my iphone 4 is backed up on crashed... I bought a new computer as well as the iphone 5. How can transfer the my data/pics/notes/songs etc to my new phone?

Use the backup you have of the old computer and restore that data to the new computer. Also and backups that you have made of your iTunes library (it has a method to back it up as well) can be copied back over to the new computer. If you attempt to sync the phone to the new computer without the data, it will delete that data from the phone. The iPhone is not designed as a storage/backup device and as such will not sync music from itself to a new computer.
If by chance you had not been backing up the computer and/or iTunes, you can google for some third party software, such as Touchcopy that will do some of what you are asking.

How to delete the duplicate data from PSA Table

Dear All,
How to delete the duplicate data from PSA Table, I have the purchase cube and I am getting the data from Item data source.
In PSA table, I found the some cancellation records for that particular records quantity would be negative for the same record value would be positive.
Due to this reason the quantity is updated to target but the values would summarized and got the summarized value of all normal and cancellation .
Please let me know the solution how to delete the data while updating to the target.
Thanks
Regards,
Sai

Hi,
in deleting the records in PSA table difficult and how many you will the delete.
you can achieve the different ways.
1. creating the DSO maintain the some key fields it will overwrite the based on key fields.
2. you can write the ABAP logic deleting the duplicate records at info package level check with the your ABAPer.
3.you can restrict the cancellation records at query level.
Thanks,
Phani.

How to get the forecast data from SCM into BW

Hello,
Is there a table or Function module in SCM F&R that can be used to transfer the forecast data from SCM F&R into BW? I dont see any Business content datasources that has the forecast data.
I would like to get the future forecast data. For ex, if there is a forecast for a material and Site for the next 52 weeks, I would like to retrieve
the same from SCM. I dont see any business content. The closest would be 0FRE_ANA_WEEKLY_1. But it has only the past data, not the future data.
Thanks,
SBS.

Hi,
You would follow the same process as you would for getting data from a R3 system to BW, i.e generate datsources on the APO side and then set the extraction to flow from APO to BW. On the BW side, you'll need a source system for the APO, replicate datsources, set up update and transfer rules in the infosource and then load data to the data targets.
Cheers,
Kedar

How to fill the master data in ecc

Hi,
0product_attr having zero records i ecc,how to fill the master data in ecc can you pls provide me the setps?
Regrads,
devi.

Hi Devi,
Loading data is ECC is not the part of BI Activities. Contact your functional consultant to load data.
BDC and LSMW both are used for loading data into SAP system.
Or ask even directly they can create in ECC. If it is for your testing purpose, it is better to ask them to create master in source system .
Thanks
BVR

How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?

How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?

Thks for the contribution. However, it seems I cannot solve my problem with the kindly proposed solution.
Let me rephrase my problem:
I off-line prepare, organize photos and also add manually individual photo captions with PE12 Organizer. In the properties panel, I can check that the photo properties (including captions) are properly associated with the photo.
However when I upload on Revel -directly with PE12 Organizer (selecting Share/Private Web Album)- these individual (accordingly captioned) photos or albums, I cannot find the photo captions (i.e. the photo caption did not directly show up with the photo in Revel). This obliges me to a double work by copying and pasting each photo caption.
Is there any plan to get rid of that ?
Let me add that I am using the French version of PE12
De : 99jon
Envoyé : jeudi 8 mai 2014 00:03
À : Michel ROUSSEAU
Objet : How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?
How to transfer the photo captions from Photoshop Elements 12 organizer to Adobe Revel albums ?
created by 99jon <https://forums.adobe.com/people/99jon> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6363397#6363397>

How to transfer the http request from applet to servlet/jsp

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

I use the JTree component to create a navigation of a website,but i don't
know how to connect the tree's nodes with the jsp/servlet.
I mean how to transfer the http request from the applet to a jsp.
I use the "<frameset>" mark which will divide the web browse into 2 blocks.
The left side is Applet,and the right side is the linked jsp page.
what I say is as the weblogic console layout.
who can help me!!!
Thank You!

Is it possible to move the master data from one server to onther server?

is it possible to move the master data from one server to onther server?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

How to Lock the master data. R/3 Conflict ESS

Dear Gurus,
Please guide me how to lock the master data for a nos of days(say 7 days).
Recently we had encountered an issue, related to ESS. While Uploading the Time data through t-code: PT60, our core team encountered a problem, that such and such employee number is locked.
While checking, they identified it, system shown error against those employees, who are accessing their ESS. We check and came to know they are accessing the master data by changing their personal record i.e. address.
Do we have any other provision to lock the master data without setting the control record to release for payroll.
Please help .

Create a custom transaction involving a custom views of table T7XSSSERSRV with the following field for each service
"V_T7XSSSERSRV-ISDISABLED"
when HR wants to lock it, the will enter this table and check this field.
this will disable the servcies in the front end.
Once the 7 days are over, HR will uncheck this field. this will re-enable the services in the froint end.
Hope this helps.

How To Transfer the master data from R/3 to APO System

Similar Messages

Maybe you are looking for