How to transfer the readings from a multimeter into a PDA?

Which are the different ways to transfer the current and voltage readings to an Excel file in a PDA using LabvIEW PDA module 8.0?
Which PDA must i buy? what must be the specs?
which multimeter should i buy? what must be the specs?
Can anyone help me?

Hello Anu,
There are different hardware options that you have here. The basic things that you need to keep in mind is that the PDA that you purchase runs on Pocket PC and has either a CompactFlash or a PCMCIA slot in it. The driver that you would be using for your LabVIEW PDA application would NI-DAQmx Base Ver 2.0.1. You can refer to its readme for more information on the supported hardware. Also you can check at this page for more information on the supported devices. About your original question, using LabVIEW PDA you can create a text file for storing data and separate the data points with a comma. So that this way you would be able to open the file in Excel if you wanted to. All the file I/O related VIs can be found in the function palette at Programming >> File I/O.
Regards,
Chetan K.
Application Engineer
National Instruments

Similar Messages

  • How to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunesb

    how to transfer file from ipod touch to i tunes. i have files in my ipod , ut itunes is  new so its telling if u sync the ipod all the files will be replaced but no files in the itunes.. so kindly help me how to transfer the files  from i pod to itunes......

    Some of the information below has subsequently appeared in a document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991
    Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was designed for you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchased content.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only media purchased from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software. Examples (check the web for others; this is not an exhaustive listing, nor do I have any idea if they are any good):
    - Senuti - http://www.fadingred.com/senuti/
    - Phoneview - http://www.ecamm.com/mac/phoneview/
    - MusicRescue - http://www.kennettnet.co.uk/products/musicrescue/
    - Sharepod (free) - http://download.cnet.com/SharePod/3000-2141_4-10794489.html?tag=mncol;2 - Windows
    - Snowfox/iMedia - http://www.mac-videoconverter.com/imedia-transfer-mac.html - Mac & PC
    - iexplorer (free) - http://www.macroplant.com/iexplorer/ - Mac&PC
    - Yamipod (free) - http://www.yamipod.com/main/modules/downloads/ - PC, Linux, Mac [Still updated for use on newer devices? No edits to site since 2010.]
    - 2010 Post by Zevoneer: iPod media recovery options - https://discussions.apple.com/message/11624224 - this is an older post and many of the links are also for old posts, so bear this in mind when reading them.
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive - https://discussions.apple.com/docs/DOC-3141 - dates from 2008 and some outdated information now.
    Copying Content from your iPod to your Computer - The Definitive Guide - http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipod-to-co mputer/ - Information about use in disk mode pertains only to older model iPods.
    Get Your Music Off of Your iPod - http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod - I am not sure but this may only work with some models and not newer Touch, iPhone, or iPad.
    Additional information here https://discussions.apple.com/message/18324797

  • How I transfer the music from iTunes to the computer?

    Hi
    I was wondering, how I transfer the music from iTunes to the desktop computer?
    I would like that as back up on another device.

    I am assuming you have a PC - not a Mac.
    In iTunes on your PC go to Edit>Preferences>Advanced
    This will tell you the location of your iTunes Media Folder on your PC.
    Now go to that location using Windows Explorer and click on the Music folder within it.   All your music should be found there

  • How to transfer the data from R/3  to APO

    Hi Gurus,
    How  to transfer the data from R/3  to APO.
    I do have 4    Ztables  in R/3  can I pass this Ztables data to APO when sales order is created in APO  .
    Thanks & Regard,
    Mohammed Ali.

    Welcome to SDN.
    refer this link
    creating integration model
    Give ur mail id i will send the document which i have.
    With regards.
    Maya.

  • How to transfer the logins from one instance to another instance in sql2008r2

    how to transfer the logins from one instance to another instance in sql2008r2

    Hi Ganesh,
    According to your description, you want to know how to transfer the logins from one instance to another instance for SQL Server 2008 R2. To do this, besides dave’s post, you could also use
    'Copy Database Wizard' in SQL Server Management Studio, or the component
    'transfer Login task' in SQL Server Integration Services.
    Regards,
    Michelle Li

  • How  to load the data from excel  file  into table in oracle using UTL_FI

    How to load the data from excel file into table in oracle
    and from table to excel file
    using UTL_FILE package
    Please give me some example

    This is something i tried in oracle apex
    http://avdeo.com/2008/05/21/uploading-excel-sheet-using-oracle-application-express-apex/
    Regards,
    CKLP

  • I have 2 laptops and both have itune liberies,how can I transfer the music from old laptop into the new one.this prevents me to sync. my music due to having 2 liberies,when this happens I cant get all the music I've downloaded

    I have 2 laptops and both have liberies,how can I transfer the music from my 1st account (laptop) into the newer one which I made a new account for.My Iclassic has music fro both liberies, but once I purchase a new song and try to sync, it into my iclassic it doesn't allow me todue to having both liberies.Can u plesae help

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How to transfer the music from an Ipod touch to another one

    How can I transfer the music from an Ipod touch to another one

    Assuming you synced the contents to the first iPod Touch, you just plug the second iPod Touch into the same instance of iTunes and select to sync the music.  If your original iTunes library is on a hard drive which has failed, then restore that from your backup and follow the above procedures.

  • How to Transfer the iPhone from one computer to another Win XP

    All
    I got my wife a new macbook pro, running Windows XP prof. She has an iphone 3G with 16 GB memory running 3.0.1. So..she wanted to transfer the sync function from her PC to her macbook. Of course, Apple was of NO help at all (but did want to charge us $69.95 since her iphone is out of warranty, and this was an iphone not a mac problem, hmmm..). Took me lots of digging, but here is how you transfer you iphone from one computer to another:
    1. Move you itunes library from the old computer to the new one. To do this, you do NOT just copy it. This is as good a link to use as any to see how to do it, but search the internet and you can find instructions:
    http://reviews.cnet.com/8301-12519_7-10242259-49.html
    2. Transfer your applications you have purchased to the new computer. To do this, open itunes in the new computer, hook up your phone and click on File>transfer purchases (from itunes store) to computer. This will move your applications to the new computer.
    3. Export your MS outlook calendar, contacts, notes, etc. to the new computer by saving each of these categories as a PST file (file>export>then choose the category and type of file)...and then copy these PST files to your new computer and import them into MS outlook.
    4. Copy your playlists from itunes on your old computer to your new computer. This link may be helpful or search the internet again if you need to:
    http://osx.tribe.net/thread/08fd0e5e-f1d0-450b-8de5-9f7cb5bd278d
    5. Now...the important part...how to transfer all your settings from the iphone to the new computer....this is the part that was hard to find online, but finally got it: NOTE: THE BACKUP THAT ITUNES MAKES BACKS UP THE APPLICATION SETTINGS BUT NOT THE APPS SO THIS IS WHY YOU NEED TO TRANSFER THE APPS TO THE NEW COMPUTER. The settings have all the data you put into your apps, email settings, preferences, etc...so its a huge time save to transfer these to the new computer also.
    -Sync your iphone with your old computer to have a backup in case you mess up...in that case you can restore from your old computer and start over
    -Plug your iphone into the new ocmputer and start itunes. It will detect your phone (I assume you have already authorized your new computer to use the library and playlists and apps that you moved)
    -Right click on the "iphone" on the left bar...you will see a popup menu...click on "BACKUP". Let it backup your iphone to the new computer. It will NOT sync the phone
    -When the backup is done....copy the backup file to a temp directory to be safe. The backup is located in "documents and settings">user name>applications>apple computer>mobile sync. If you cannot see it, you need to open windows explorer (not internet explorer) and go to tools>folder options>view and click on "show hidden files and folders" Note YOU CANNOT JUST COPY THE BACKUP FROM THE OLD COMPUTER TO THE NEW COMPUTER AS SUGGESTED ON SOME WEB SITES...THIS DOES NOT WORK, ITUNES WILL NOT IDENTIFY THE BACKUP EVEN IF YOU PUT IT IN THE FOLDER IN THE NEW COMPUTER THAT MIRRORS THE FOLDER LOCATION IN THE OLD COMPUTER.
    -OK now you are ready...click restore on the iphone and restore the phone to factory settings. This will happen in a few minutes (10-15 mins).
    -The phone will reboot and itunes will recognize the phone again...as a restored phone. It will then ask you if you want to restore it from the backup..say YES. You then need to go through all the itunes tabs and click on everything you want to sync to the phone (playlists, movies, podcasts, ringtones, etc). Once you are done going thru the tabs click "apply" and the sync will start. Go out, to a movie, to bed, whatever because it will take hours to sync.
    -Once the sync is done...voila...your iphone has been moved with ALL the settings to the new computer. Check it. Then you can delete the backup you put into the temp folder if it is OK
    -Deauthorize your old computer
    This worked for Win XP...should work for Vista. The whole process took many hours so don't rush through it (i'm guessing 12 hours total work).
    Can I send apple a bill for tech support?????

    All
    I got my wife a new macbook pro, running Windows XP prof. She has an iphone 3G with 16 GB memory running 3.0.1. So..she wanted to transfer the sync function from her PC to her macbook. Of course, Apple was of NO help at all (but did want to charge us $69.95 since her iphone is out of warranty, and this was an iphone not a mac problem, hmmm..). Took me lots of digging, but here is how you transfer you iphone from one computer to another:
    1. Move you itunes library from the old computer to the new one. To do this, you do NOT just copy it. This is as good a link to use as any to see how to do it, but search the internet and you can find instructions:
    http://reviews.cnet.com/8301-12519_7-10242259-49.html
    2. Transfer your applications you have purchased to the new computer. To do this, open itunes in the new computer, hook up your phone and click on File>transfer purchases (from itunes store) to computer. This will move your applications to the new computer.
    3. Export your MS outlook calendar, contacts, notes, etc. to the new computer by saving each of these categories as a PST file (file>export>then choose the category and type of file)...and then copy these PST files to your new computer and import them into MS outlook.
    4. Copy your playlists from itunes on your old computer to your new computer. This link may be helpful or search the internet again if you need to:
    http://osx.tribe.net/thread/08fd0e5e-f1d0-450b-8de5-9f7cb5bd278d
    5. Now...the important part...how to transfer all your settings from the iphone to the new computer....this is the part that was hard to find online, but finally got it: NOTE: THE BACKUP THAT ITUNES MAKES BACKS UP THE APPLICATION SETTINGS BUT NOT THE APPS SO THIS IS WHY YOU NEED TO TRANSFER THE APPS TO THE NEW COMPUTER. The settings have all the data you put into your apps, email settings, preferences, etc...so its a huge time save to transfer these to the new computer also.
    -Sync your iphone with your old computer to have a backup in case you mess up...in that case you can restore from your old computer and start over
    -Plug your iphone into the new ocmputer and start itunes. It will detect your phone (I assume you have already authorized your new computer to use the library and playlists and apps that you moved)
    -Right click on the "iphone" on the left bar...you will see a popup menu...click on "BACKUP". Let it backup your iphone to the new computer. It will NOT sync the phone
    -When the backup is done....copy the backup file to a temp directory to be safe. The backup is located in "documents and settings">user name>applications>apple computer>mobile sync. If you cannot see it, you need to open windows explorer (not internet explorer) and go to tools>folder options>view and click on "show hidden files and folders" Note YOU CANNOT JUST COPY THE BACKUP FROM THE OLD COMPUTER TO THE NEW COMPUTER AS SUGGESTED ON SOME WEB SITES...THIS DOES NOT WORK, ITUNES WILL NOT IDENTIFY THE BACKUP EVEN IF YOU PUT IT IN THE FOLDER IN THE NEW COMPUTER THAT MIRRORS THE FOLDER LOCATION IN THE OLD COMPUTER.
    -OK now you are ready...click restore on the iphone and restore the phone to factory settings. This will happen in a few minutes (10-15 mins).
    -The phone will reboot and itunes will recognize the phone again...as a restored phone. It will then ask you if you want to restore it from the backup..say YES. You then need to go through all the itunes tabs and click on everything you want to sync to the phone (playlists, movies, podcasts, ringtones, etc). Once you are done going thru the tabs click "apply" and the sync will start. Go out, to a movie, to bed, whatever because it will take hours to sync.
    -Once the sync is done...voila...your iphone has been moved with ALL the settings to the new computer. Check it. Then you can delete the backup you put into the temp folder if it is OK
    -Deauthorize your old computer
    This worked for Win XP...should work for Vista. The whole process took many hours so don't rush through it (i'm guessing 12 hours total work).
    Can I send apple a bill for tech support?????

  • How to transfer the tables from one file group to another file group in SQL 2008.?

    Hello all,
    I have few issues regarding the transfer of the tables from one file group to another file group  in SQL 2008 and also How can we  backup
    and restore the particular database based on file group level.
    Let’s say I have a tables stored within the different FG. such as
    Tables                                                    
      File group
    Dimension tables                                              
                                                                     Primary
    Fact tables                                               
                                                                              FG1
               FG2…
    zzz_tables                                               
                                                                              DEFAULT_FG    
    dim.table1                                                                                                                          DEFAULT_FG
    dim.table2                                                                                                                          DEFAULT_FG
    Here all I want to transfer the dim.table1 ,dim.table2  from  DEFAULT_FG to the Primary File
    group .So is there simple methods for transfer the dim.table1,2  from one FG to another .I have tried somewhat but I couldn’t get the exact way .So if someone have better idea please share your knowledge that would be really appreciated.
    Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing  the Primary and FG1,FG2… not
    a DEFAULT_FG.Is it possible or not.?
    Hope to hear from the one who knows better approach for this kind of task .Your simple help will be much appreciated.
    Regards,
    Anil Maharjan

    Well after all my full day research on this topic had paid off, I finally got the solution and am so happy to research on these things. It makes
    us feel really happy after all our research and hard work doesn't goes as waste.
    Finally I got what I am looking for and want to make sure that I am able to transfer the tables from DEFAULT_FG to another FG without tables
    having clustered index on that tables .
    With the help of the link below I finally got my solution where Roberto’s coded store procedure simply works for this.
    Really thanks to him for his great post and thanks to all for your response and your valuable time.
    http://gallery.technet.microsoft.com/scriptcenter/c1da9334-2885-468c-a374-775da60f256f
    Regards,
    Anil Maharjan

  • How to transfer the files from one server to another through pl/sql...?

    I want to transfer all the files from source server with respective directory to designation server with respective directory (designation server - oracle reside server).
    Is it possible to ftp from one server to another server(designation server - oracle reside server) through pl/sql. these two servers are independent & unix server.

    No ... The package mentioned in
    http://www.oracle-base.com/dba/miscellaneous/ftp.pks
    this works for across the server i.e. transfer the files from one server to other (it is basically ftp) ..
    So it is NOT correct that this code transfer the file between two location & with in server..

  • How to Transfer the Data from ORACLE APPS to SAP

    Hi Gurus,
    Here are my couple of quieries regarding Data Migration from Legacy(Oracle Apps) to SAP.
    1. How to link between Legacy system(ORACLE APPS) and SAP ?
    2. How to migrate the data from Oracle tables to SAP directly, instead of loading the flat files(.txt, .xls) ?
    Please respond to my queries ASAP.
    Thanks,
    SAPSURE.
    Edited by: sapsure on Sep 9, 2010 11:39 AM
    Edited by: sapsure on Sep 10, 2010 2:32 PM

    1. How to link between Legacy system(ORACLE APPS) and SAP ?
            If you have SAP PI in place then you can interact with oracle database tables directly from PI and then data can be posted to SAP transactions through IDocs/BAPIs.
            If you did not have SAP PI still you can do JDBC connection directly from ABAP program. Not sure about the exact steps check in forum.
    2. How to migrate the data from Oracle tables to SAP directly, instead of loading the flat files(.txt, .xls) ?
            If you want to directly post the data SAP transactions (I hope not directly to SAP tables) then connection needs to establish through ABAP program or Via. PI.
    Regards,

  • How to bind the data from user table into user report

    Hi All,
      Please assist me to bind the data from user table into user report. I did create an user table with data and create a user report template (using Query Print Layout). How can I display my data into report format which I created before? Any sample program or document I can refer?
    Platform: SAPB1 2005A
    Add On Language: VB.Net 2003
    Thanks.
    rgds
    ERIC

    Hi Ibai,
      Thanks for your feed back. I give you an example.
    Let say now i wanna print employee list, so i will go
    1. Main Menu -> Reports -> HR -> Employee List
    2. Choose the Selection Criteria -> OK
    3. Matrix will display (Employee List)
    4. I can print the report click on print button
    5. Printing report
    My target
    1. Main Menu -> Eric_SubMenu -> Employee List
    2. Matrix will display (Employee List)
    3. Print button
    4. Print report
    My problem
    Now I would like to use my own report format. My own report format means I wanna add on my logo or do some customization within the employee report. So how I am going to do? I only able to display the employee list in matrix. How do I create a new report format and display it.
    Thanks.
    rgds
    ERIC

  • How to load the data from excel file into temprory table in Forms 11g?

    Hi
    How to Load the data from excel file(Extension is .CSV) into the temporary table of oracle in Forms11g.
    My Forms Version is - Forms [64 Bit] Version 11.1.2.0.0 (Production)
    Kindly Suggest the Solution.
    Regards,
    Sachin

    Declare
        v_full_filename         varchar2(500);
        v_server_path           varchar2(2000);
        v_separator             VARCHAR2(1);
        v_filename              VARCHAR2(400);
        filename                VARCHAR2 (100);
        v_stop_load             varchar2 (2000);
        v_rec_error_log         varchar2(4000);
        v_error_log             varchar2(4000);
        ctr                     NUMBER (12);
        cols                    NUMBER (2);
        btn                     number;
        RES                     BOOLEAN;   
        application             ole2.obj_type;
        workbooks               ole2.obj_type;
        workbook                ole2.obj_type;
        worksheets              ole2.obj_type;
        worksheet               ole2.obj_type;
        cell                    ole2.obj_type;
        cellType                ole2.OBJ_TYPE;
        args                    ole2.obj_type;
        PROCEDURE olearg
        IS
        args   ole2.obj_type;
        BEGIN
        args := ole2.create_arglist;
        ole2.add_arg (args, ctr);                                
        ole2.add_arg (args, cols);                                   
        cell := ole2.get_obj_property (worksheet, 'Cells', args);
        ole2.destroy_arglist (args);
        END;
    BEGIN
    v_full_filename := client_get_file_name(directory_name => null
                                     ,file_name      => null
                                     ,file_filter    => 'Excel  files (*.xls)|*.xls|'  
                                                                            ||'Excel  files (*.xlsx)|*.xlsx|'                                                                 
                                     ,message        => 'Choose Excel file'
                                     ,dialog_type    => null
                                     ,select_file    => null
    If v_full_filename is not null Then
    v_separator := WEBUTIL_CLIENTINFO.Get_file_Separator ;
    v_filename := v_separator||v_full_filename ;
    :LOAD_FILE_NAME := substr(v_filename,instr(v_filename,v_separator,-1) + 1);                                
    RES := Webutil_File_Transfer.Client_To_AS(v_full_filename,"server_path"||substr(v_filename,instr(v_filename,v_separator,-1) + 1));     
    --Begin load data from EXCEL
    BEGIN
        filename := v_server_path||substr(v_filename,instr(v_filename,v_separator,-1) + 1); -- to pick the file
        application := ole2.create_obj ('Excel.Application');
        ole2.set_property (application, 'Visible', 'false');
        workbooks := ole2.get_obj_property (application, 'Workbooks');
        args := ole2.create_arglist;
        ole2.add_arg (args, filename); -- file path and name
        workbook := ole2.get_obj_property(workbooks,'Open',args);
        ole2.destroy_arglist (args);
        args := ole2.create_arglist;
        ole2.add_arg (args, 'Sheet1');
        worksheet := ole2.get_obj_property (workbook, 'Worksheets', args);
        ole2.destroy_arglist (args);
        ctr := 2;                                                     --row number
        cols := 1;                                                -- column number
        go_block('xxx');
        FIRST_RECORD;  
        LOOP       
                --Column 1 VALUE --------------------------------------------------------------------
            olearg;
            v_stop_load := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            :item1 := v_stop_load;
            cols := cols + 1;                                                      
              --Column 2 VALUE --------------------------------------------------------------------
            olearg;
            :item2 := ole2.get_char_property (cell, 'Text'); --cell value of the argument
            cols := cols + 1;
            --<and so on>
        ole2.invoke (application, 'Quit');
        ole2.RELEASE_OBJ (cell);
        ole2.RELEASE_OBJ (worksheet);
        ole2.RELEASE_OBJ (worksheets);
        ole2.RELEASE_OBJ (workbook);
        ole2.RELEASE_OBJ (workbooks);
        ole2.RELEASE_OBJ (application);
    END;
    --End load data from EXCELPlease mark it as answered if you helped.

  • I had problems with my computer as a result I have lost all my music from my itunes account. Does anyone know how to transfer the music from ipod touch back into itunes?

    Hi, My computer recently got wiped. When everything was re-installed I found that I had no music in my itunes account. It is all on my ipod touch (and very old ipod) but I cannot figure out how to transfer it from the ipod touch into my itunes. Can anyone help? Thanks in advance A

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

Maybe you are looking for

  • View for os version

    Hi*, some days ago I stumbled over a view, with which I can get the OS on which the database runs. Was it in this forum? Was it in another forum? Did I dreamed about this? I can't find it again. Andreas

  • How do i get my iphone 6 contacts to replace contacts in macbook pro?

    I made a whole bunch of changes to my contacts, on my iphone, and when I went to sync it to my laptop, the contacts from my laptop went onto my iphone! So now I'm back to square one! Is there anyway to set it so that my iphone overrides the macbook w

  • Latest podcast episodes don't appear in iTunes

    This topic doesn't seem to be new: 6 episodes of our podcast have been properly shown up in itunes. #7 and #8 are not updated in the itunes store. Any help is highly appreciated, Thanks! Itunes store: https://itunes.apple.com/de/podcast/arkhaminsider

  • Samsung CLP-300 attached to Airport Express Base Station: Issues

    I have found that my Samsung CLP-300 printer, which is connected to my Airport Express Base Station via USB, refuses to print after printing one document. After restarting my Airport Express Base Station, I found that the printer would start printing

  • How to import from old address book?

    Hi all, I've searched the net about my problem but with no result. I have an old mac (a G3 iMac running 10.3.9) with a lot of contacts on its Address Book, and I do mean a lot. The computer is completely dead, but I have a copy of the contents of its