How to Translate JMSCorrlationID to MQ 48 hexa digits

I need to transform the JMSCorrelationID into hexad�cimal ascii value and pad it to 48 hexa digits on the right. For example, a function translateCorrelationID make "JUNIT12" become
"ID:4a554e495431320000000000000000000000000000000000".
Any existing example or link will be really appreciated

Voice Translation Profiles introduce a new scheme to translate numbers. The older translation rules are to be gradually phased out of the system. Cisco strongly recommends you only use one scheme of translation rules. If you mix the old and new schemes, you can have unforeseen results.
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

Similar Messages

My new smart TV recognizes my network, & asks, "Please enter you WEP keys (10 or 26 hex digits)" but my netwotk uses a password of 6 characters. How can I get my smart TV to connect to my network?

I have a current iMac with the latest OS update.
My new smart TV recognizes my network, & asks, “Please enter your WEP keys (10 or 26 hex digits). My Airport Express, an early model, only requires a password of less than 10 characters.
When I open “airport utility,”on my iMac it tells me this version doesn’t support my base station & says go to “Airport Service & Support.” That’s what got me here.
My earlier MacBook runs OS 10.6.8. Its version of Airport Utility works. Its Airport ID has 17 characters, & uses the same password to access the internet, but it also has a “wireless password” of 26 characters, but only shows me the dots. i haven’t the foggiest notion what the characters are, if I put them in there years ago when i did the original configuration, or if they got there otherwise..
I’m afraid of changing those settings for fear that I’l mess up the whole thing.
How can I get my smart TV to connect to my network, ?

Please check out the following AirPort User Tip on how to recover AirPort passwords.

How to translate text elements in forms from type : pdf

does anybody know how to translate text elements
in pdf from english to other languages.
i tried the tran. se63 and filled in the desired language,
but there was no effect on the output ,
thanks,
ami

call this funcation. crate_text.
CALL FUNCTION 'CREATE_TEXT'
         EXPORTING
           FID               =
           FLANGUAGE         =
           FNAME             =
           FOBJECT           =
         SAVE_DIRECT       = 'X'
         FFORMAT           = '*'
         TABLES
           FLINES            =
       EXCEPTIONS
         NO_INIT           = 1
         NO_SAVE           = 2
         OTHERS            = 3
       IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
       ENDIF.

How to translate the text according the SAP logon

Hi Friends,
I have a report, in the selection screen have 4 radio buttons which characters are displaying in German language , if logon in DE. But not populating in other language (English, French , Italian etc ).
Whenever SAP login in u201CENu201D , is displaying an Information message u201CUntranslated texts from master language DE wi also be displayedu201D.
Please guide me how to translate the text according the SAP logon.
in GOTO-> Translation -> Original language "DE" and traget language is empty.
Regards,
Subash

Did you try transaction SE63?
Translation -> ABAP Objects -> Short texts, select object type S3 and either REPT or SCRT, probably REPT since it's a selection screen.

How to translate the key words in ABAp program from lower case to upper cas

How to translate the key words in ABAp program from lower case to upper case?

Hi Kittu,
You need to set the Pretty Printer settings to achieve key words in ABAP program from lower case to upper case.
Utilities -> Settings -> Pretty Printer (tab) -> Select third radio button.
Thats all.
<b>Reward points if this helps.
Manish</b>

How to translate std. ABAP report in german language to English in SAP

Dear All,
How to translate std. ABAP code in German language to English in SAP ?

Hi,
code does not need to be translated.
Data elment descriptions, documentation, text elements, etc. can be translated in the transaction se63.
Also you can translate almost each single object in the editor in the menue goto-translation.
Regards,
Gianpietro

How to translate the text in VV12

Hi All,
I would like to know how to translate the texts in VV12 after selected the key combination?
How to translate Sales Organization and Sales document type?
Could someone please advise.
Thank you.

Howdy muks,
First I would like to thank you.
I have gone through the kb link. After goin through the same link I got a lot of doubts which I have explained earlier.
The steps which I did-->
1)I have exported the strings.
2)I copied all the text in the text file and translated the same into Japanese.
3)And I copied the same(Japanese) into a new text file(with same file name as of the VIs). But its giving error.
I dono what to do. It would be helpful if I get any vi or the procedure to translate the txt file or the strings which I should I translate.
Regards,
Yogesh
Message Edited by YogeshaYS on 08-24-2008 11:24 AM

How to translate the MODIFYTM in LBYI table?

Hi,
We are using a database trigger to create a separate dashboard database for forms. The trigger is on the LBYI table and runs both on update as well as insert. However the key information that needs to be captured is Modify Date.
Can anyone suggest how to translate the value from MODIFYTM field to a date format?
Thanks,
Prashant

Hi Prashant,
The field contains an hexadecimal representation of the date and can be converted to a readable format using a DAL script. I don't know if a third-party application can read and understand that hexadecimal format, but it looks like Microsoft Excel cannot do it.
You may have more luck getting an answer if you open a Service Request with Oracle Support.
Gaétan

How to translate checkbox label of screem?

Hi Exports:
How to translate checkbox label of screem?
I need to change the standard screem field lable to display another text. But I can't find the screen text in SE63? Can anybody gave me a clue. Thank you!
Edited by: Nika Wei on Oct 7, 2008 7:07 AM

no need from SE63 either.
Just from SE38 itself.SE38>program name>change mode>goto>text elements>selection text>again from GOTO>translation>give source and target language and change from here and save you efforts and come out.

How can I import data in to the digital word generator in Multisim?

How can I import data in to the digital word generator in Multisim?
I just received this comment from a friend, a RADAR engineer, who has just down loaded Multisim. He has been using HP/Agilent software. He has a work around using a piecewise linear voltage waveform with data imported from Excel but this is not really a good solution. It would also be helpful to import data from Mathcad or equivalent.
"I thought I was about to be impressed with MultiSim but it ended only in disappointment. There is a word generator in the simulation instrument panel which can drive the DAC with a waveform and it can have thousands of lines of values. I opened Excel, wrote the formula to generate the time and voltage points for a chirp, converted to DAC values in Hex and then went back to the word generator in MultiSim to load the values only to find that you have to enter each value manually. It doesn’t even allow you to paste in a list of values from a text file. I’m not going to type 5000 values by hand. If you get the chance to give feedback to National Instruments please ask them if the paste option can be added to the word generator. MultiSim is useful in many regards, but in this case, it left me with the impression that it is considerably limited in capability compared to what I’m used to."

Hi,
You can load your data automatically in the Multisim word generator. Follow these steps:
- Save your data file (in excel .xslx ir .csv format) on your computer
- Change the extension of the file to ".dp"
- Double-click the word generator in Multisim and click on Set...
- In the Settings dialog box, click on Load and then Accept
- This will prompt you to select the .dp file you have on your computer, select it and you're good to go
However, in Multisim you have the option of creating your own custom simulation analysis and instrument.
I will try creating the instrument and send it back to you but it might take some time.
Multisim and LabVIEW are very powerful in test automation, with the custom instruments you create for Multisim you don't need to export your data file into excel from LabVIEW (or MathCAD or other tools) and then reload it into Multisim. The test procedure is automated instead.
Please check this reference design about automated simulation
http://zone.ni.com/devzone/cda/tut/p/id/7825
Here is how you can create your own custom measurement tool in Multisim and LabVIEW, but as I mentioned, I will create the word generator and come back to you anyways
http://zone.ni.com/devzone/cda/tut/p/id/5635
Let me know if you have any questions.
Mahmoud W
National Instruments

How can I open two screens of Adobe digital editions at the same time?

How can I open two screens of Adobe digital editions at the same time?

I doubt that you can. Doesn't the Sound prefpane require you to select just one output device?

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel

I was given an assingment, but have no idea where to begin. The assingment is to create a text file using notepad with all of my digital inputs and some how make those imputs show up on my digital indicators on my control pannel.
When it was explained to me it didn't sound to hard of a task, I have no LabVIEW experience and the tutortial sucks.

StevenD: FYI, I did NOT give you the one star rating. I would never do that!
StevenD wrote:
Ow. Someone is grumpy today.
Well, this is an assignment, so it is probably homework.
Why else would anyone give HIM such an assigment, after all he has no LabVIEW experience and the tutorials are too hard for him?
This would make no sense unless all of it was just covered in class!
This is not a free homework service with instant gratification.
OK! Let's do it step by step. I assume you already have a VI with the digital indicators.
"...but have no idea where to begin".
open notepad.
decide on a format, possibly one line per indicator.
type the document.
close notepad.
open LabVIEW.
Open the existing VI with all the indicators.
(are you still following?)
look at the diagram.
Who made the program?
Does the code make sense so far?
Is it a statemachine or just a bunch of crisscrossed wires?
Where do you want to add the file read?
How should the file be read (after pressing a read button, at the start of the program ,etc.)
See how far you get!
Message Edited by altenbach on 06-24-2008 11:23 AM
LabVIEW Champion . Do more with less code and in less time .

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

How do I change or delete the Adobe Digital ereader licenses?

My HP laptop and Acer Iconia tablet are getting error messages. Laptops says that the license isn't assigned to the user, the Iconia says the time settings are incorrect.
When I downloaded the books from the library to the laptop it worked fine the first time. Then I tried to USB the book to the Acer. Acer didn't show up in ADE. I next tried using the library menu in the top left side area with the "authorize device". Upon authorizing the device in an attempt to get the Acer to show up, now the laptop can't open books and the message says it isn't assigned to user. And the Acer still doesn't show.
The only books that will download are the Guttenberg project free books. Can't open any library books from Overdrive.com.
Been to the library and they're trying to get help, but it's been over a week. I'm thinking if I can delete the license and then
redo it for both devices that might solve the problem.
Thanks for any help.

You seem to have more than one problem. First, the Iconia time, date and
time zone should be reset to your current location. That's the easy one.
At the same time, you should check the HP and make sure that its time, date
and time zone are also correct - just because....
There's a layer of technology that covers the use of ebooks and ereaders.
It stems from the Digital Millenium Copyright Act of 2000, and manages
digital rights to epublications. Every epublication that had a valid
copyright is affected. And that's where many of the issues with ereaders
come from. There are a couple of solutions described in the 'Technology
Blog Zone' that may help you to fix your issues. Start with THIS
ONE<http://technology.myblogzone.info/2011/01/how-to-solve-the-error-getting-license-message-i n-adobe-digital-editions/>,
and then try this
one<http://ebookreadersoftware.wordpress.com/2010/10/27/how-to-change-the-authorized-adobe-id/>.
If you need help with your ereader, try THIS
one<http://ebookreadersoftware.wordpress.com/2011/10/03/how-to-authorize-your-ereader-for-adob e-digital-editions/>.
Hope this helps!
=================

How do I rotate view 90 degrees in digital editions?

how do I rotate view 90 degrees in digital editions?

In Library Grid view there are curved arrows that appear on the thumbnail or at the bottom of the Loup view if you turn Rotate controls on.
In Develop you can right-click and choose Transform -> Rotate right/left (CW/CCW), or use the keyboard shortcuts.

How to Translate JMSCorrlationID to MQ 48 hexa digits

Similar Messages

Maybe you are looking for