How to translate Report Painter Reports (GRRT or other solution)?

Hello All,
We need to translate Report Painter Reports, and it doesn't seem that it can be done using SE63.
The transaction, <b>GRRT, Report Painter->Translate Reports</b>, may be the one to use, but we cannot find any documentation on this transaction. (not even on sap.help.com). The only translation references we could find for Report Painter were regarding translating currency. We need to translate the text content into different languages.
Can you provide any information or links to material about GRRT? Or do you know of an alternate solution to translate Report Painter report content?
Thanks in advance for your help.
Regards,
Lisa

Hi All,
I  recommend that you use transaction SE63. This enables you to translate what you need:
1) Selection texts for reports: SE63 -> Translation -> Short Texts ->    ABAP -> Program texts -> Enter program name, source and target    language and choose Edit.
2) Report Writer texts (what you have been using the G* transactions    for): SE63 -> Translation -> Long Texts -> SAPscript -> Report Writer    -> Enter name of library, source and target language and choose Edit. You can find documentation on transaction SE63 by choosing Help -> Application Help while you are working in this transaction. The section on Transport Recording also contains information on how to transport translations.
Best wishes,
If you have further queries, you may reach me over
Dr. Ravi Surya Subrahmanyam, PhD Finance,
SAP FICO Consultant,
Answerthink (India) Limited
Hyderabad, India
Phone :91 9848550024
Email : [email protected]

Similar Messages

  • How to new add characteristics value  c in report painter report.

    I  want add one how to new add characteristics value  in report painter report of FKi5. How can I add ?

    Dear,
    First you need to add that Field to your using library.When you add that
    field to your library ,you will automatically get that field into that
    selection list.
    Use T-code GR22 for change library and enter your library name and Table
    name and then select which field you want to add
    regards

  • How to copy code from Report Painter report?

    Hi all,
    I have a cost/commitment Report Painter report from Project Systems module. I need to include one more column with a field, Release indficator, from purchase order in the report. I am finding no way to do it through report painter and also am not able to copy the code of the exiting report painter report. Please advice.
    Regards
    Tapan

    check the defination of that report in KE30 or thru menu path ?
    Regards
    Prabhu

  • How to copy code from PS Report Painter report?

    Hi all,
    I have a cost/commitment Report Painter report from Project Systems module. I need to include one more column with a field, Release indficator, from purchase order in the report. I am finding no way to do it through report painter and also am not able to copy the code of the exiting report painter report. Please advice.
    Regards
    Tapan

    check the defination of that report in KE30 or thru menu path ?
    Regards
    Prabhu

  • How to debug report Painter/Report Writer?

    Hi All,
    I need help to debug report painter report s_alr_87013611. I need to know which tables it is using. Any help  is appreciated.
    Thanks

    Hi Rocky,
    ST05 will show you all the tables called in this report.
    Just check, you will get the required tables.
    Reward points if useful.
    Regards,
    Atish

  • Problem in Exporting a Report Group having a Report Painter Report.

    I am having a problem in exporting a Report group having a Report Painter report.When I am trying to export the Report Group using transaction GR57 with all dependent objects,it is displaying:
           group 0102CPDNUEA-CCROSI not transported.
           Transport groups separately if necessary.
    There are 6 such groups which are not transported.Can anybody help me in this regards.Can anybody help me in exporting these Groups.Specifically in Report painter reports what do these Groups signify and how can we see them.Please help me....

    hi,
    I am able to export my report groups with dependent objects successfully.
    I dont know why you are getting error message. Just keep break point at ***** and execute it for single group and find out why it is giving error.
      IF SY-BATCH = 'X' OR NO_LIST = 'X'.  "direct or batch
        SET PF-STATUS 'LIST'.
    *****PERFORM TRANSPORT_OBJS USING 'X'.  "transport all jobs
        IF FILE_EXP <> 'X'.
          READ TABLE WT_E071 INDEX 1.
          IF SY-SUBRC = 0.
            LEAVE.
          ENDIF.
        ENDIF.
      ELSE.                                "online
        SET PF-STATUS 'MENU'.
       PERFORM WRITE_TRANSP_OBJS.
      ENDIF.
    regards,
    ram

  • Line Items missing in report painter report..

    Hi guri's,
    Iam uisng customized  P&L report painter report using with library 1VK....in this report some line items are not shwoing..... how to solve it...
    regars
    JK

    After you've create a P&L report using the report painter, you would also have to create line item reports for example 'Receiver- Profit Center Line Items'  and then assign these line items reports under 'Report/Report Interface' in the P&L report.
    How to do this:
    1. After creating the line item report(s),  use transaction code GR52 which is for change report group. Enter the P&L report group and click enter.
    2. Under 'Report/Report Interface', click on 'configure' under assigned report to library.
    3. In the pop-up screen, click on the green plus sign "Insert Row"
    4. Another screen will pop-up. Enter the report group for the line items report and enter.
    5. Save
    6. Regenerate your report group. After regeneration, execute.
    7. Drill-down in the displayed P&L report to the line items.
    Don't hestitate to ask for further clarifications.
    Elias

  • Selection values in Report Painter Report

    Hi All,
    I am creating a report  painter report for Plan/Actual values using  library 0FL.In my characteristic value column I included fiscal year as a  value and  hard coded the fiscal year so i dont need this parameter in my selction screen.When I execute the report the fiscal year is coming in the selection twice.i.e:
    Fiscal Year
    Fiscal  Year
    Company Code
    Period
    From Profit Center
    To Profit Center
    How do I wipe out this fiscal year from my selection screen? In GRR2 -> EDIT--> General data selection , I only have  profit center values.I dont  know why this fiscal year is coming up as a selction parameter when I hard coded in the column.Any help.Thanks
    Regards
    Shaun

    HI Shaun
    In GRR2, Against the char, there is a check box where in you specify to treat it as a variable.. DId you check that box? Unless you check that, it wont appear in the selection screen
    Regards
    Ajay M

  • Display Profit Center & GL Account in 2 Seperate Columns in Report Painter Report

    Hello All,
    I am building a Report Painter Report for Inventory Balances. As psrt of my requirement I have to display GL Account & Profit Center ina different Column & their Balances for each month on this Current Fiscal Period. As/of now I am only able to have both GL Account & Profit Center in the Same Lead Column? And it is perfect if I look on the Report but when I download all the GL Account & Profit Center are not seperated with Color, so it becomes confusing. I need to have  execlty the Report as Same Format S_PL0_86000030.
    How can this be achievable? Thanks for your valuable input?

    the account is probably in account group or set. Look for that one in report painter and then go to the set or account group and remove/add the account.

  • Selection Field in Report Painter Report

    Dear All,
    Could any one tell me the procedure to add new field at selection screen for the report painter report ? To change the report painter selection screen i have to change the Report group or Report of the report group?
    Thank in stack

    In general data selection, i have already cost center, but it is not apprearing at selection screen. Only three field are appearing (Year + Period + Forecast),  and i want to add cost center at the selection screen. How to make cost center field at selection field from General data selection option. Please guide me
    Thank in stack
    Nilesh Shete

  • Report painter report in portal - Excel output in SAP GUI for HTML

    Dear sirs,
    I need your expertize. I would like to let my users display (Excel in place)/ save the result of my report painter reports into MS Excel. I have found notes 499262 a 314568, but didn´t understand the message (or there is no message:)). Does that mean I cannot use Excel in place together with Report painter and SAP GUI for HTML?
    Second question: is there a place (user exit in generated code? I don´t even know what I am looking for) to get the data provided by the report painter engine and send the retrieved data to some custom function (to be able to call the Adobe form, to save it as a text file or any option how to manipulate the resulting data...?).
    thank you for your time and effort,
    regards Otto

    Hi Otto,
    You can send print the report to the spool and then use RSTXPDFT4 program to convert this spool to PDF file. Alternatively, you can export the spool to spreadsheet or ASCII file via SP01 transaction.
    Additinally, I'm not aware of unability to use Excel output with SAP GUI interface.
    Regards,
    Eli

  • Change the default setting for report painter reports.

    HI All
    Can we change the default setting in SAP/R3  in the report painter reports  for the selection screen options?
    If yes,Please let  me know how we can change the default settings.
    Thanks in Advance
    Best regards
    Venu

    HI
    We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
    Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
    How and where do we  set or change the default parameters for the selection screen ?
    Thanks in advance
    Best Regards
    Venugopal

  • Implicit enhancement for report painter reports(For GRR3 and CJE3)

    Hi,
    We have a client requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings.We have also done implicit enhancement for all these reports to make change in the behaviour of new fields.This is working fine in the development client but the problem is once we transport this to other client new reports get generated( With new name ) and implicit enhancement will be lost.
    For eg:in development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ"
    but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
    Can you please suggest how to handle implicit enhancement in such cases? Or what is the correct way to transport it.
    Thanks in advance
    Regards,
    Shekhar

    Hi,
    Thanks for the quick reply..
    I have already done implicit enhancement as you said ,my problem is to transport it to another client.
    I have implemented implicit enhancement for one report lets say it as "ABC", and i transport it to another client with all the enhancement. But in another client new program "XYZ" is getting generated for same report( dynamic programs ), so my implicit enhancement is present but its applicable to "ABC" program but not for "XYZ".
    Can you please suggest how can i handle this??
    thanks in advance,
    Greeshma.
    Edited by: Accgreeshma on Jan 23, 2012 3:04 PM

  • Selection screen control for a field in the report painter report

    Hi,
    Could you please advice me as to how we can add exclude selection functionality for a field on the selection screen of a report made by trhough report painter report.
    Your prompt reply will be really appreciated.
    Thanks,
    Ramesh.

    look at this code and try
    select-options : S_NODEID for ZNODETAB-ZNODEID.
    at selection-screen on value-request for s_nodeid-low
    perform f4_nodeid using 'S_NODEID-LOW'.
    at selection-screen on value-request for s_nodeid-low
    perform f4_nodeid using 'S_NODEID-HIGH'.
    end-of-selection.
    FORM f4_nodeid  USING    p_field.
      declare it_node.
    select znodeid from ZNODETAB into table it_node.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          retfield        = 'ZNODEID'
          dynpprog        = sy-repid
          dynpnr          = sy-dynnr
          dynprofield     = p_field
          value           = space
          value_org       = 'S'
          display         = 'F'
        TABLES
          value_tab       = it_node
        EXCEPTIONS
          parameter_error = 1
          no_values_found = 2
          OTHERS          = 3.
    endform

  • Selection screen fields order in report painter report..

    hi experts,
    i have a  problem with selection screen fields order in report painter report.
    Actually in report painter report selection screen order is different compare to report writer report selection screen.
    how should i get the same selection screen fields order For  Report painter  report compare to Report Writer report ?
    For example, Report Writer selection screen order is:
      ledger:
      company code:
      period:
      current fiscal year:
      previous fiscal yer:
      previous quarter end period:
    where as Report Painter selection screen order is:
      ledger:
      previous fis year:
      current fis year:
      company code:
      period:
      previous quarter end period:
    please help me regarding with this.
    Thanks and Regards,
      NAGARJUNA.

    hi nagarjun,
    Go to Sq01, select the query and goto to change mode.go to the next screens till u reach Selection fields. Here u enter the NO field in the sequence which u want ot appear in the selection screen and it is done. Save and execute.
    Ex:
    Selection fields No
    Exclude Cancelled Lots 5
    Material number 1
    Plant 2
    Material type 3
    Inspection Lot Origin 4
    Regards,
    Lokesh

Maybe you are looking for